Any incompatibility between the xp mode in Windows 7 running with AMD a10 5800 APU?

Similar Questions

• How to disable the test mode on Windows 7?

  Hello

  I read an article on how to get rid of the test mode on windows 7 and the suggestion was to download fixit from windows.  My problem is that the slider runs constantly and I can't click on anything to start the download.  Any suggestions?

  Hi Mona,.

   
  Thank you for visiting Microsoft Community.
   
  I understand that you have found a water test mode on the Windows 7 computer brand.
   
  Test mode is a mode that aims to install drivers that are not tested.
   
  For several build of windows 7, that this mode and disable this, you can follow the article below:
   
  http://support.Microsoft.com/kb/2509241
   
  To fix the rotating cursor around constantly please follow the suggestions below:
   
  This problem may be caused for the following reasons:
   
  Third-party applications.
   
  Temp folder is full.
   
  1. What is the number of brand and model of the computer?
   
  2 have you recently made any changes to the computer?
   
  To resolve this problem follow the methods below:
   
  Method 1: Clean boot
   
  Put your system to the clean boot state helps determine if
  any third-party applications or startup items are causing the problem. You
  need to follow the steps in the article mentioned below to perform a cleanup
  Boith
   
  How to perform a clean boot in Windows
   
  http://support.Microsoft.com/kb/929135
   
  Note: After troubleshooting, see the section "how to reset the computer to start.
  "normally after a boot minimum troubleshooting.
   
  Use this procedure to disable all the third-party application and Microsoft services will be activated.
   
  Method 2: Disk clean
   
  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7
   
  Following this article, you can delete the temporary files that is on the computer.
   

  Additional information:

  How to disable the "Test mode" message that is displayed in Windows

  http://support.Microsoft.com/kb/2509241

  Hope this information helps. For all other windows-related assistance,

  Do not hesitate to contact us and we will be happy to help you.

• What is the difference between the professional versions of windows 7

  What is the difference between the professional versions of windows 7 (X 15 65805, x 17-24281 and x 17-59186)?

  Reference numbers are simply the channel in which it was distributed OEM, etc. at retail.

  Apart from that, they are all the same.

• How can I move the Virtual Mode of Windows XP hard drive to another drive

  How can I move the Virtual Mode of Windows XP hard drive to another drive?

  TIA

  Hi Benyl,

  The vhd in programfiles basis cannot be moved or renamed, if done, xp mode stops at the start.

  To move the files under c, first to boot xp, instead of save mode the machine virtual., turn it off. (settings to prompt the user for action narrow close). Close the machine virtual., and then choose stop. This will remove the vsv file. Do not delete the .vsv file because it contains data if you have not registered in the virtual machine.

  Now, move it "C:\Users\CHRIS.domainname\AppData\Local\Microsoft\Windows virtual PC\Virtual Machines\Windows XP Mode.vhd" to a desired location.

  Parameters of xp mode open, go to the hard drive 1 setting and reposition the hard drive to the new location of the vhd. You should now be able to start the virtual machine.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Packets exported 11 g, but when I import on 12 c error of ' the target 11.2.0.3.0 database is an older version of the 12.1.0.1.0 source. Thus the storage clause is ignored to avoid problems of incompatibility between the versions. »

  Packets exported 11 g, but when I import on 12 c having error of ' The 11.2.0.3.0 target database is an older version of the 12.1.0.1.0 source. Thus the storage clause is ignored to avoid problems of incompatibility between the versions. »

  When I export only 1 package and then import, then I have no error and imported successfully, but when I do bulk above mention error comes.

  
  

  How can you make with the help of the SQL Developer or query?

  
  

  Kind regards.

  The problem is solved since
  Impdp iris/tpstps@PCMS full = Y dumpfile INCLUDE PACKAGE VERSION = 11.2.0.3.0 = packagespcmsTWO.dmp =
  query

• Any difference between the separate function and aggregation in sql query cost?

  Hello
  I've run many models sql stmts - such as:
  one) using a single table
  (b) using the two tables, using simple joins or outer joins
  
  but I didn't notice a difference in sql stmts in cost and implementation plan...
  In any case, my colleague insists on only using the aggregate function is less expensive compared to
  separate... (something I've not confirmed, that is why I believe that they are exactly the same...)
  
  For the situation described above under 1 sql... We could for example use
  

  select distinct deptno
  
   from emp

  select count(*), deptno
  
   from emp
  
   group by deptno

  select distinct owner, object_type from all_objects

  select count(*), owner, object_type from all_objects
  
  group by owner, object_type

  Have you ever found no difference between the two...?
  
  Note: I use Ora DB 10g v2.
  
  Thank you
  SIM

  Alexandre Gelin says:
  function separate and aggregation are for different uses and can give the same result, but if you use the aggregate function to get the separate records, it will be expensive...

  really? I find them almost identical to 11g. Actually GROUP BY is almost always more fast for me in the old days.

  article about this askTom Re: any difference between the separate function and aggregation in sql query cost?
  This applies mainly to the older oracle versions http://www.oracle.com/technology/products/rdb/pdf/distinct_derivedtables_groupby_sort_tech_article.pdf

• I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all).

  Hello!

  I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all). I picked up my installation disc and everything, only to find out that someone stole completely he reapply. I am unsure weather or not it is enabled or whatever it is. I tried to call Microsoft technical support and they said to go to the retailer I bought since then, but the retailer in question no longer exists. I'm just screwed?

  Thanks for your help!

  You can retrieve the product key, and then use it to re-download a new copy:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

  Go to the recovery of the software Page and then enter your key:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  If you plan to upgrade to Windows 7, see:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• How to install xp home edition on the series 1000 HP from PC laptop with AMD processor

  Help...

  How to install xp home edition on the series 1000 HP from PC laptop with AMD processor.

  Thank you very much...

  Hello:

  Please read the info below AMD...

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  I have attached the drivers that you need wake under attachment below...

• How to change the power mode in Windows 7

  Hello

  I'm not very good in English (I'm Dutch) only when I talk about games or something not to technical stuff, but I'll try to explain

  In recent weeks, I have windows 7 running on this laptop.
  First I had vista, but who was bad. Windows 7 works much better.

  In any case, I don't have day my laptop with drivers from this site.
  When I was running I was missing something.

  On the right side where you can chance your schedule 'energy', you can choose between low and balanced performance.
  On vista, I had as good, but not now.

  Y at - it an update where I can lucky who?
  If Yes please can someone tell me where to find this update.

  Greetings,

  me

  took me 10 minutes to post this because of your message contains profanity or inappropriate language.
  In the interest of your fellow forum users, we ask you to change your message.

  Hello

  Windows 7 is a bit different as the Vista operating system.
  But you can change the settings in the Power Options located in the control panel.

  Go to the Control Panel-> Power Options

  There you can find both of these options; Low performance and balanced performance.
  The high performance is hidden you will need to click the arrow to open the option where the mode performance.

  But you can also create a mode of clean energy;

  On the left you will find the option: create the mode of power (or something like that... Sorry it s just translated)
  That could be an option that lets you choose the high performance.

• How can I fix the space between the bottom of my window and taskbar?

  Recently (today), firefox has had a space between the bottom of the window and my taskbar. I tried the relocation and safe mode, and it does not disappear. Here is a screenshot of the problem. http://imgur.com/mTQtrDN

  Hey guys, I discovered that it was not just firefox, but all the windows with borders, like the windows Explorer. My difficulty was unlock the taskbar and dragging to halfway up, then down.

• new hard drive - what is the difference in performance between the new installation of Windows 7 or a clone of old hard drive?

  I get a new hard Hard Drive (SSD).  The new disc is the same size as my existing SATA drive.  I can do either a new

  the installation of Windows 7 or a clone old hard drive?  I would prefer to clone the old hard drive and keep all my settings, etc.   It's empirical data on the performance difference between a new installation of Windows 7 or to continue with the Windows 7 which was 3 or 4 years ago.

  I know the conventional wisdom is that the new installation is faster, but, no matter who actually tested and compared the differences?  I know I'll get better performance of the SSD the SATA drive, but I don't know if it's worth the hassle to do a fresh install and redo all my programs and settings.

  Others that the performance of the SSD you should not see any differences.  If you do, you can always do a clean installation later.

• Compatibility Mode and the XP Mode in Windows 7

  I got a little confused on the Compatibility Mode with XP Mode in Windows 7. Both allow you to legacy Windows run in Windows 7. As far as I know, the former just request that you go to your legacy application that is already installed in Windows 7, get his property and check the box Compatibility Mode and select your old Windows OS (Windows XP, SP2) - that seems without any requirement of additional beyond your Windows 7 operating system HW/SW; But this last request additional 1 GB of RAM and also installation PC Virture Mode before you can run XP Mode. Are the two modes of the same thing or different? It seems that Compatibility Mode is to each legacy Windows application, so no additional HW/SW and XP Mode is environmental BONES together. Is this fair? Appreciate if anyone can clerify this.

  Hello

  No, they are not the same.

  Compatibility mode allows you to run software simply, as say you, selecting Properties and then compare the compatibility mode and select the appropriate operating system to run this application. As you say 'no additional SW/HW prescription.'

  XP Mode is, of all intent and purpose, a virtual machine mode. You must first install Virtual PC software and then, after you have created a machine virtual, you install your software and it works as if it is running on a separate computer - hence the need for a 1 GB of additional RAM. The 1 GB of RAM is allocated to the virtual machine. If you say 4 GB of RAM then your PC would use / 3GB and your 'virtual' PC would use the other 1 GB.

  It is also interesting to note that your PC has also therefore support XP Mode, if it isn't then XP Mode cannot be installed.  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk; Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org;

• Change the SATA mode in Windows 8

  I'm moving to sata IDE to RAID mode in Windows 8 in order to avoid the re-formatting my hard drive. The solution in Win7 (update registry KEY in regedit does not work). Any advice?

  With all due respect, Srivinvasa Sharath, your answer is very useful.  The question is not ' how can I change the SATA mode in my BIOS?  But, on the contrary, assuming I already know how to change the SATA in my BIOS mode, how Win8 to accept this change and actually start correctly.  There is a guide on how to proceed for Win7, but it doesn't work for Win8.  So we would know what to do differently with Win8 to make it work.

  Here is a link to the article corresponding Win7 so you will see what is asked:

  http://support.Microsoft.com/kb/922976