Any of the possible/available wireless connections

Similar Questions

• Windows XP does not display the available wireless connections

  I formatted my hard drive and created two partitions. Then I installed Windows XP in one of them and Vista in the other. Then only under Vista the network card works and I see all kinds of connections available. Where, in Win XP it will not display the available wireless connections. I have tried everything to try to activate my net work card but can't find a way to do it. Maybe Win XP a clean installation driver missing. Does anyone have any ideas? I have studied all the forums and that you can't find the answer.

  Thanks for all the ideas that I could research.

  Thanks, missing the driver for the Dell Wireless card. He wasn't on resettlement drive.

• My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router.

  Dialog box of connection Wi - Fi Protected Setup Wizard in the Intel PROSet /Wireless connection utility

  My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router. He let me just plug in numbers not letters. Can someone tell me how to work around this problem?

  Hello

  This can happen if the configuration of the router is configured to accept the password in numbers. You can get in touch with Bigpond support for more information on this.

  Technical assistance to BigPond

• on the available wireless connections stop messages

  I am constantly irritated by 'view wireless connections' I always use a cable, but I still want the ability to connect wirelessly when IIII wish. I am so tired of this pop-up. I just bought my first laptop w/xp and does not know how to stop the message. Thanks, bruce

  Looking for a switch on the laptop that can disable the wireless network when you don't want to use it.

• List of not available wireless connections

  I m using Windows XP on my laptop. My wireless was working fine. But now there is not any list of network in the wireless network connection window. so I can't connect to the wireless network. but some time is to show wireless network detected in the task pane. but in the networks list, nothing is available. and if I did ping as he takes a few ip with the wireless. Even if I can't see the network in the network list. So I have reintalled driver also but it does not work. It is not problem with devide and driver, because it's the network access that eventhough is not show in the list of wireless networks. Please suggest.

  It works after uninstalling the driver and reinstalling the same driver. then I restart the wireless zero configuration service.

  Thank you for your support.

• Computer displays not available wireless connections

  I'm trying to connect wirelessly to the internet but my computer says "windows cannot configure this wireless connection" and it does not show my options for internet connections! "If you have enabled another program to manage the wireless connection using this software" and it gives me code 871122

  Hi JesusMontoya,

  You can read the following article that should help you to solve the problem.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• All-in-one software does not provide the option of wireless connection

  I have improved my all-in-one software on my HP laptop, but when he asked how to set up the connection, there is no option for a wireless connection. There were 2 options: usb cable and ethernet cable. I chose the ethernet cable, but it does not work. Prior to this level and even now, I can print to the wireless laptop, but I can't scan.

  My configuration is:

  OK, be sure to restart and do a Windows update after you HAVE uninstalled the HP software.  Then install from the link 'Support & drivers' at the top of this page.

• where to find the switch for wireless connection on computer laptop esprimoV5535

  get the message {connection Wi - Fi doesn't work}, but it is not no matter what visible switch on laptop so presumably its located

  via the keyboard

  Hello

  ·         If it works much earlier?

  Through my research, I think it's the F1 key, you need to press on and press and hold the FN key (lower-left beside Ctrl) at the same time. This should illuminate the LED on the front of the computer laptop-extreme right wireless.

  You can view the documentation for the laptop to switch wireless for more information.

  For any other help, I suggest you to contact your laptop manufacturer support.

  Here is the link: http://support.ts.fujitsu.com/Download/Index.asp?lng=COM&Level1=&LNID=44

  I hope this helps.

• Unable to connect to the network with wireless connection on Windows 7.

  Original title: wireless Internet access

  I have good network and internet connectivity when I am connected via CAT - 5 to my router/modem.  However, when I access the wireless network, I always have good connectivity and access to internet but can't send or receive emails or access Web sites.  My client browser and internet messaging turns just until it times out.  Any ideas on the cause of this problem?

  Hi Michael,

  Thanks for posting on the Microsoft Community.

  I understand that you are unable to access e-mails or browse the site when you are connected using wireless network. I appreciate your time and patience to try to resolve the problem.

  1. What is the brand and model of the computer?
  2. What internet browser do you use?
  3. What mail client do you use?
  4. You receive an error message?

  This can occur due to missing updates, hardware or software problem on the computer.

  Initially, run the network troubleshooter from the link below, go to step 3.

  If the problem persists, then check out the link below which helps to fix the network connectivity issues. Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab4&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  Hope this helps to solve the issue if the problem persists get back to us. We will be happy to help you.

• Need help on the issue with wireless connectivity on Win7 - dynamic key exchange did not within configured time

  Hello

  I get below error when you try to connect to the wireless router. It was working fine until a few days back.

  InterfaceGuid {1F8AA774-8AE0-48BA-87EB-5522A6070F3E}
  InterfaceDescription Dell 1540 802.11a/g/n (2.4 GHz/5 GHz) Wireless
  ConnectionMode automatic connection with a profile
  BSSType infrastructure
  Key exchange dynamic FailureReason failed within configured time
  Used 294917
  ConnectionId 0x9

  What is the reason code 294917?

  Any help to solve the problem would be useful.

  Kind regards

  Srinivasa

  Hi Richard,

  Thanks for the quick response.

  I tried diff incl. power options. Nothing has worked.

  Finally, I reset my router unit today and it works now.

  Hope that this issue would not yet :-)

  Kind regards

  Srinivasa

• Problem connecting Wireless Windows 7 - No. available wireless connections

  I have the same problems...

  I have just purchase a HP with Windows 7 Desktop on her calculation

  27/11/2010.  Get a router Netgear wireless... use Clearwire for internet services.   I have so many questions, being able to connect on wifi... with all my other electronic devices cell... phone, laptop?

  Old computer is running Windows Xp... never had any problems... now... couple months... keep having in that regard... Yes... when it starts in mode 'sleep'...

  I have to reset the router then couple of days later... same thing again... .iPhones do not work, laptops don't work... never had this problem before?

  Help! Please... I'm not a computer expert to be... but I'm tired of this... Help!

  Hello

  Assuming that the signal is strong, and that there is no noise in the electrical environment.

  Visit the support site of the computer and make sure that you use the latest drivers * for network adapters.

  Check support for the router and make sure that your using the latest firmware for the router.

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  * On drivers update .

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• the lack of wireless connection

  OK so my sister came home with his new laptop windows 7 and gave me his old laptop XP and now the wireless doesn't work on wither my xp 7 sisters sisters another vista or wii. Everything can not find the network even if the signal watch is solid and functional and our Office XP is very well connected to the internet. We have no idea if it's portable computers, the modem, the router, or internet if someone could help that would be great.

  Hello

  My guess would be that someone played with the wireless router and it is currently not compatible with laptops not more.

  Since you see a signal, but it is not connected, it should be a question of password security.

  Try to connect with the desktop computer to the router (read the manual) and check (or redo) wireless security.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to solve the problem of wireless connectivity

  I tried to use the wireless internet connection, but the network signal showing me a full signal with the operating state. I also tried to use the troubleshooting connection, but for me there is no problem stating. But still, I can't access internet, the status of browser simply open and display a "pending to connect. I went to cmd and it is what tells me

  "Microsoft Windows [Version 6.1.7600]."
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\User>ipconfig/all

  Windows IP configuration

  Name of the host...: Benjamin
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : BE-B7-0D-28-4D-10
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Wireless Network Connection 2 wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Ada Atheros AR9002WB-1NG wireless network
  pter #2
  Physical address.... : 9C-B7-0D-28-4D-10
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv4 address: 192.168.1.169 (Preferred)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DNS servers...: 213.55.96.166
  213.55.96.148
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : DC-0E-A1-3D-3C-D1
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {EF78D66C-9571-412A-B8AB-7D37EB0F2330}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:9 d 38:953 c: 20 c 4: 3faf:3f57:fe56 (Pref
  made a mistake)
  Address IPv6 local link...: fe80::20c4:3faf:3f57:fe56% 18 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  "C:\Users\user >.
  Can someone help me in this problem. Thanks in advance for your kind and favorable response

  Hi Bini,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problem with wireless internet connection in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• where can I enter the WEP for wireless connection?

  When ddo enter the WEP key wo full information Wi - Fi?

  http://Windows.Microsoft.com/en-AU/Windows7/setting-up-a-wireless-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-security-key-for-a-wireless-network

• Affected by the problem of wireless connectivity. I don't remember the network key.

  I unhooked computer for diagnostic purposes.  Everything was OK.  However when I reinstalled I couldn't access Internet Explorer... System has requested a network key.

  The key is what you have created, be it on your router.  If you don't remember it, reset your default router.  The router manual will tell you what is the default value.