Any solution to add the checkbox [] without

Similar Questions

• Can you add the checkbox to search results point at exit Responsive HTML5?

  The Webhelp output has a checkbox to highlight search results like this:

  

  But the release of Responsive HTML5 does not have this option despite highlighting the results:

  

  I don't see any way to add this in the page layout customization window:

  

  Is it possible to add a checkbox to disable the highlighting? We recently had to sensitive HTML5 and we have been asked how to disable highlighting.

  Thank you.

  I found a partial solution to this. I found that if you build the sensitive HTML5 output, you can edit the html code for the main subject under the research section. The checkbox code to highlight is there, but it is set to hidden. You can view it. The problem is while the box does not resemble the box "display results with all the words. You can work on some issues of style, if you get creative. It is nowhere near perfect, but we should be able to disable highlighting.

• Is there any solution to access the Web Sites not allowed in Cyberroam?

  In our Institute some Web Sites are prohibited when we open this particular link, it displays the message "Access denied" all methods to open that web sites?

  Hi Jonathan,.

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description provided, I understand you are trying to open Web sites restricted on the Windows 7 computer.

  If the sites are prohibited or regulated by an administrator, we don't have an option to access these Web sites. You must contact the system administrator for assistance.

  Back to us for any problem related to the Windows operating system. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

• How to add the data without loss of data store?

  Hello

  We had ESXi 3.5 installed on 1 HDD and data store was on a different HARD disk.

  Now the HDD with ESXi host got crashed and I had to replace it with another HARD drive and make new ESXi installation on the new HARD drive.

  Now after the new ESXi install on new HARD drive, it does not detect the data store on the HARD drive second.  It is, however, detect the LUN of the second HARD disk.

  Now, how can I do detect the data store on the second HARD drive?  Or y at - it anyway I can add the data store on the second HARD drive to the new host ESXi?

  Thanks in advance.

  Kind regards

  Denis

  You will need to activate lun resignaturing and snapshot LUN, mount and rename the store of data back to its original name, and then disable them.

  -Matt

  VCP, vExpert, Unix Geek

• Graphic style that adds the line without changing the filling?

  I want to assign a graphic style that adds to the existing style. For example, I need to add the same line to various objects that have different fillings. I can do it with a graphic Style? I know that I can the group object and add the style of the group, but it complicates the structure of the file. I would have preferred the race has been added to the object itself. I watched "additives styles", but don't think they are what I'm looking for.

  Thank you

  Select the object of Alt/Option click on the graphic Style with the stroke to be added.

• Add the checkbox next to another?

  Hello again.  How can I go on the placement of one checkbox next to each other who is going to open the changes for all documents?  I will paste a picture below to show what I mean.

   w.tabs[1]= w.tabGroup.add ('group');
              w.tabs[1].add('statictext {text: "Select a change to make"}');
              w.tabs[1].add ('panel');
    
          var RunCH1= w.tabs[1].add ('checkbox {text: "Find and Replace"}');
          var RunCH2= w.tabs[1].add ('checkbox {text: "???"}');
          var RunCH3= w.tabs[1].add ('checkbox {text: "???"}'); 
  

  The foregoing it activates.  After the ok button is checked.

  myResult = w.show(); 
        
         if(myResult == 1 && (RunCH1.value==true)){      
            Replace_TXT(" <CR> ", "^p");    
            Replace_TXT(" <CR>", "^p");
  

  I want the a checkbox to add corresponding to the Cyan box on or directly next to the find and replace text.  Either or.  I want to make it another check box so that when clicked and the search and replace is clicked executes the command for all documents.

  

  By using the ratings of your first message, it could be like this:

  var gr1 = w.tabs[1].add ("group{orientation: 'row', alignment: ['fill', 'top']}");
  var gr2 = w.tabs[1].add ("group{orientation: 'row', alignment: ['fill', 'top']}");
  
  var RunCH1 = gr1.add ('checkbox {text: "Find and Replace"}');
  var RunCH2 = gr1.add ('checkbox {text: "???"}');
  var RunCH3 = gr2.add ('checkbox {text: "???"}');
  

  (Add empty groups with a focus on line - there are 2, gr1 and gr2, then nothing added to this group will be queued on the same line).

  Xavier

  ==============================

  Edit: If you start with scriptui, ScriptUI for Dummies (Peter Kahrel) is a very good source of information with many examples.

• ADD THE AMOUNT WITHOUT USING THE COMMAND

  Hi 2 all...
  
  the table contains:
  
  UID billno amount
  1 101 100
  2 102 200
  3 103 300
  
  the o/p should be:
  
  UID total amount billno
  1 101 100
  2 102 200 300
  3 103 300 600
  
  I need the query for this pblm without using the command... Please advice... can someone send immed... Thanks in advance...

  If you still don't bother to write in proper understandable English or probably your keyboard is broken.

  Anyway you can do this

  SQL> WITH t AS (
    2  SELECT 1 col_uid, 101 billno, 100 amount FROM DUAL UNION ALL
    3  SELECT 2, 102, 200 FROM DUAL UNION ALL
    4  SELECT 3, 103, 300 FROM DUAL)
    5  -- end test data
    6  select col_uid, billno, amount, decode(amount, amount_cum, null, amount_cum) amount_cum
    7    from (
    8  select t.*, (select sum(amount) from t t1 where t1.col_uid <= t.col_uid) amount_cum
    9    from t)
   10  /
  
     COL_UID     BILLNO     AMOUNT AMOUNT_CUM
  ---------- ---------- ---------- ----------------------------------------
           1        101        100
           2        102        200 300
           3        103        300 600
  

• Any solution to use the same IP configured on Windows 7 to Windows XP Mode.

  Hello

  Currently I have the Installer Windows XP mode on Windows 7. The environment requires static IP address within the specific range (eg. 192.168.6.xxx) to download documents from the repository (server). But because of the limitation on the static IP address, is there a work around where XP Mode can use the primary IP configured on Windows 7? Please specify.

  Best regards

  Verhasselt

  (moved from XP)

  Hello Vasanth,

  Thanks for posting your query in Microsoft Community. I apologize for the late response. The question you have posted here would be better suited in the TechNet forum. You can use the link below to post here.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• Dynamically add a checkbox to HGrid and accessing the controller

  I wonder if it is possible to add a column of checkboxes to a HGrid, and then access the method processFormRequest of the controller?  I would avoid the modification/extension of the page itself and or the view object and make all changes to just the extension of the controller.

  I add the boxes without problem, but I can't seem to understand how to access during an iteration through the lines of HGrid with OAHGridQueriedRowEnumerator.  In my view, that the question is because the boxes that I created are not related to the view object associated with the HGrid.  I didn't add them to the HGrid like this:

  Private Sub addCheckBoxes (OAHGridBean hGridBean,

  {OAPageContext oapagecontext)

  oapagecontext.writeDiagnostics (sModule, ' adding Checkboxes. ",")

  OAFwkConstants.STATEMENT);

  OACheckBoxBean = boxBean

  (OACheckBoxBean) createWebBean (oapagecontext, OAWebBeanConstants.CHECKBOX_BEAN,

  (NULL, "xxSelectBox");

  boxBean.setID ("xxSelectBox");

  boxBean.setUINodeName ("xxSelectBox");

  boxBean.setChecked (true);

  boxBean.setLabel ("Print");

  boxBean.setName ("xxSelectBox");

  hGridBean.addIndexedChild (0, boxBean);

  }

  
  But when I check the attributes of line in the method procesFormRequest of the controller, it does not attribute my newly added check boxes. Should the boxes be linked to a display object to enumerate the values? They are not related to something on the backend, they contain only the interactive user data during the presentation of the page. I have to add an attribute to the view to the HGrid for my new UIComponent? How would I do that?

  I answered my own question. The HGrid I have access has three your (or three levels). Parent, child of the Parent and child child.  For some reason, in processRequest, child to child VO had not been linked or executed. I was able to link and run, then access to VO remaining as follows:

  for (WOLParentWorkOrderVORowImpl parentRow = (WOLParentWorkOrderVORowImpl) parentVO.first ();)
  parentRow! = null;
  parentRow = (WOLParentWorkOrderVORowImpl) parentVO.next ()) {}

  Ri RowSetIterator (RowSetIterator) = parentRow.getWipEntityIdParentWorkOrderVO ();
  ViewObject childOfParentVO = ri.getRowSet () .getViewObject ();

  If (childOfParentVO.lookupAttributeDef ("xxSelectForPrint") == null) {}
  childOfParentVO.addDynamicAttribute ("xxSelectForPrint");
  }

  Boolean bExec = childOfParentVO.isExecuted ();
  If (! bExec) {}
  childOfParentVO.setWhereClauseParam (0, ");
  childOfParentVO.setWhereClauseParam (1, "");

  ...
  childOfParentVO.executeQuery ();
  }

  Lines should have child children VO
  for (WOLChildWorkOrderVORowImpl childRow = (WOLChildWorkOrderVORowImpl) childOfParentVO.first ();)
  childRow! = null;
  childRow = (WOLChildWorkOrderVORowImpl) childOfParentVO.next ()) {}
  RowSetIterator ri2 (RowSetIterator) = childRow.getWipEntityIdWOLChildWorkOrderVO ();
  ViewObject childOfChildVO = ri2.getRowSet () .getViewObject ();
  If (childOfChildVO.lookupAttributeDef ("xxSelectForPrint") == null) {}
  childOfChildVO.addDynamicAttribute ("xxSelectForPrint");
  }
  }
  }

• Windows Mail. Cannot add the domain of the sender to the blocked sender list

  Mails are received without a good 'from' address.  They now have the shape of the House of garbage.  NOTES not real names.

  I inadvisedly signed up for something the House of garbage and other offers from partner sites.  House of garbage and partner sites all start sending me waste in large quantities.  They all had one thing in common - all spam emails came rubbishionmx.com.    I had managed to block this domain by adding it to the blocked senders list.

  Now I get these emails again in my Inbox.  Any attempt to add the domain to blocked senders list fails. Probably due to no dΘcodeur address.

  What should I do now?

  You are welcome. Are you speaking of the only rule address book? Depending on the type of legitimate mail you get, some like it and some do not.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Tools | Message rules | Mail | New.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want messages not in the address book to go to deleted items, or you can create a spam folder and direct them here.

  You can choose to delete the server, but be careful because you never have messages downloaded to any folder, if you choose this option.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox. You won't see other emails.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

• How to add the voice data on recorded voice file?

  Hello

  I'm working on control of voice (RecordControl interface) recorder in BlackBerry.
  I would like to add the voice on file already saved data.

  Is it possible to add new data on the already saved file? or any other solution to add the data of voices on the already saved the file?

  Thank you

  Sohail

  No worries mate.

• ADF12C: The best way to add the filter of the table of af: selectBooleanCheckbox

  I have an af:table in my page and the default filter is enabled for all columns.

  I have a column of type checkbox. I would like to add the checkbox to filter to filter the checked and uncheck the data. My checkbox data are mapped to 0 and 1

  

  My code:

  < af:column headerText = "#{bindings." ABC.hints.Col1.label}"id ="c7 ".

  sortProperty = "#{bindings." ABC.hints.Col1.name}.

  filterable = "true" sortable = "true" >

  "< af:selectBooleanCheckbox value =" #{row.bindings.Col1.inputValue} "label =" #{row.bindings.Col1.label} "disabled ="true"shortDesc =" #{bindings. " ABC.hints.Col1.tooltip}"id ="sbc1"/ >

  < f: facet = name 'filter' >

  < af:panelGroupLayout id = "pgl2" halign = "center" >

  < af:selectBooleanCheckbox value = "#{vs.filterCriteria.Col1}" autoSubmit = "true" id = "sbc2" / > "

  < / af:panelGroupLayout >

  < / f: facet >

  < / af:column >

  I have to use < f: facet = 'filter' name > option to implement, but get the error below.

  "ORA-01722: invalid number."

  Any help is appreciated.

  Thank you

  Luke.

  You are welcome.

  Can you close it please message by checking one of the answers as Correct?

• Change the color of the CS5 without CSS table cell borders

  Hello

  I need to change the color of the cell borders on a painting I did in CS5

  BUT

  I can't use CSS in this case because for some reason, she makes my messages in wordpress going crazy. Some conflicts, perhaps.

  I am using the CSS for some things in Wordpress and its fine, but for some reason any when I add the CSS code in my posts it will banans and everything did go in all directions.

  I know that in older versions of Dreamweaver, it was a simple case of using brdr , but now he must use CSS right? Now I love CSS! It's the best thing to happen to the internet since the Web 2.0 - but in this case, I just need to change the border color of transparent cells... or to get rid of it completely.

  Then. is there another way that anyone could recommend?

  I'm going crazy with this! It's also a little problem... and I have so many other things I need to focus on.

  Anyway, thanks for reading. Any help would be great

  P.I >

  big dreamers never sleep

  I expect that if you were adding an external stylsheet and try to use a selector class or element, especially if something happens later in the css.

  You should be able to use a style inline cell specific itself without causing WordPress to have fits on the rest of the table...

  or

  Or others should do.

• How to reset the password without a reset disc?

  Well, a few weeks ago, I changed my password to connect to windows 7. I have one user on my laptop and it is administrator, of course. Then when I changed it I started using my sensor of fingerprint instead of type the password every time I turn on the laptop but over the weeks, I forgot the password and I don't have a reset disk. I can still connect and use the laptop with the fingerprint login, but I can not connect with password due to forget me. Is there anyway to reset the password without ill reset or the windows cd, what has been suggested by others, yet I do not have and have never heard of him. I tried using cmd and restart the computer in safe mode, but I failed because it did not work for me or I didn't do it properly because of instructions is not not clear. I don't want to download the 3rd party software thank you.

  Is any way to reset the password without a reset of the disease

  Here you go:

  1 log on with your fingerprint reader

  2. click on the start planet.

  3. type the three letters cmd in the search box.

  4. press on Ctrl + Shift + Enter

  5. click on "run as Administrator".

  6. type the following command and press ENTER:
  NET user "user %%nom" 123456
  (this will set the password to 123456)
  7 plan in advance and create, test and document a spare, even admin account that you have a spare House key.

• My firefox toolbar custom add-on modules and tools / &amp; other misc disappeared. Could not get there to change or make changes for some reason any. I reloaded the program. No solution.

  Cannot add much more to the issue. Can't the part of edition of the program. I reloaded the program, no change. This program has been flawless so far. I did no change this month. Now, all of a sudden, my Firefox toolbar disappeared and don't see when I can change or repair. I use Windows XP pro. Thanks for any response. Seems I may have to abandon the program without technical help is available for this problem.

  Thanks for the reply at the time of the Tylerdowner. I solved the problem accidentally by a right click on the top bar area and I found the setting was on 'full screen '. If after clicking that, the entire toolbar reappeared. No problem now. Thanks in any case.