Any solution to use the same IP configured on Windows 7 to Windows XP Mode.

Similar Questions

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Error: tell someone else used the same IP address on Windows Vista

  Original title: same address

  I got a message this morning saying someone was using the same service provider address Internet as I am... i said to contact windows

  Hi Brenda,

  (1) what is you receive the exact error message?

  (2) when exactly you receive this error message?

  (3) remember you to make changes prior to this problem?

  Run the fixit available in the article below to reset the IP (Internet Protocol) address

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Can I use the same disk to install Windows in 2 devices

  Hello

  I was wondering earlier this year I bought Windows 8 for my laptop game. And now I'm upgrading to a desktop PC Windows games with windows 7, can I use the software disks even if I connect to my Microsoft account. In other words I re can I use the disks if they are associated with the same account?

  No, you can't, 1 license, 1 computer.

  The key that can be used with 32-bit or 64-bit of Windows 8 is exclusively for 1 disc. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 8 32-bit or 64-bit on another partition or another computer, you must purchase an additional license.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  If you comply with these license terms, you have the rights below for each license you acquire.

  1 OVERVIEW.

  a. software. The software includes operating system software. This software does not include Windows Live services. Windows

  Live is a service available from Microsoft under a separate agreement.

  b. license model. The software is licensed on a basic computer copy. A computer is a physical hardware system with internal storage capable of running the software. A hardware partition or blade is considered be a separate computer.

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• Can I use the same CD to install windows 7 in two different parts by buying a new key for the second PC?

  I bought a full version ultimate DVD with two CDs and a windows 7 for 32-bit and one for 64-bit. I had installed the software (64-bit) in my laptop and it got successfully installed and activated with the key writtn on the CD packaging. Can I use the CD of 32 bits that came with the pack to install windows 7 ultimate in my desktop PC? If this is not the case, can I use the CD with a new key? Please guide the installation process

  No, you will need to buy a new product key.

  Unfortunately, Microsoft is no longer product keys is selling, so you could end by would have to buy a new Windows 7 Ultimate license to a third party.

  Full version-

  Microsoft Windows 7 Ultimate

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade

• Spend the SSD HARD will I be able to use the same used the window license key?

  Original title: switching C drive.

  Hello

  I want to spend my HARD drive C drive to the SSD. I'll be able to use the same license key of window used that was once installed on the HARD drive window.

  Yes, you can use the same product key for reinstalling Windows.

  Please note that you must install the programs you have installed currently, after what the reinstallation of Windows is filled. In addition, you must install the device drivers before you can start working with the PC after reinstalling.

• Uses the same drivers as Windows 7 Windows 8?

  Hello! I was wondering if Windows 8 uses the same base drivers under Windows 7. I considered dual-boot on my old Windows 7 computer that had defective drivers, to avoid the risk of my newer computer. Would I be able to dual boot and have different drivers, or Windows 8 uses the same drivers on Windows 7? On a side note, it would even work, or have I missed some crucial detail?

  Windows 8 and Windows 7 share the same driver model. Windows 8 comes with a standard set of class for the peripheral communes drivers. Usually, drivers that are preloaded with the OS offer basic functionality and you must go to the website of manufacturers of device for drivers optimized for the device, this includes devices such as your video card or a printer.

  According to the edition that you run, you can keep your personal files, applications, and settings. Apart from that, I recommend strongly dual boot with your existing operating system rather than replace it with the output preview Windows 8. Preview release is still in heavy development and do not replace a copy of production Windows with it (be it XP, Vista or Windows 7).

  http://techingiteasy.WordPress.com/2012/03/05/How-to-dual-boot-Windows-Vista7-and-Windows-8/

• Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

  Hello world

  How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

  There is no solution, if it is not available in your area, you can't buy it.

• Win7 with FF 31, smart phone 4.2 with FF letest ver. using the same account with 1 email. But the phone is not getting any collar, Bokmr, etc.

  Brother.
  We use win7 with Mozila 31, 4.2 with Mozila Android smart phone latest google app store on 04/10/0214. Using the same account with the same email. But the phone does not get any new information of win7 with Mozila 31. PL z give useful information.

  Hi w3ur_team,
  Thank you for your question. I understand that there are two features that are documented in the sync account. However the Android is not synchronized.

  There are two places we can check:

  1. In the Android settings, under accounts is the Firefox Sync or Firefox Sync (discouraged) joint account?
  2. Credentials work on accounts.firefox.com on the mobile device and are there any error messages in the synchronization of the settings menu > sync?

  See also Firefox Sync troubleshooting and tips for more troubleshooting steps.

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• Can I install 2 copies of Windows 7 on the same PC in a dual-boot configuration (using the same license key)?

  I just bought Windows 7 Home Premium Upgrade Family Pack, with 3 upgrade licenses.

  I update my 3 PCs at the House Windows XP to Windows 7.

  I double on 2 of these PCs, boot Windows XP (for me, one for my wife) on different partitions. the two Windows installs fine activated using the same license (probably because they are on the same physical computer with the same hardware, and only 1 instance of Windows XP can be used at a time).

  I like to create 2 different partitions, and install Windows on each and choose the one that start when I boot. It worked well in Windows XP. Can I do this with my new Windows 7 Family Pack?

  My final configuration would have 1 PC with 1 partition and a new update to Win 7; and 2 PCs each dual-boot using the other 2 licenses.

  Please calm down, the question is not so complicated (if you read the operating instructions / first license agreements).

  (1) If you want to cancel an upgrade and return to your old system under license (XP), you can do it. You can not use XP anymore, If you upgrade. But if you come back that the State of origin, you will have the same license as before.

  (2) with your Family Pack, you can spend 3 PC to Windows 7. 3 upgrade licenses = 3 licenses to upgrade. It's an interesting idea to use it to "5 installed on different partitions 5" because two of them are "on the same physical PC." However, you should know the rule "1 license is 1 pc." You use not here too artificial.

  "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• Try to use the same pattern for more than two channels (CSR configuration) with usb 6000

  Hello

  I am currently trying to implement a LabView code to get readings of voltage using 5 different places at the same time. I want to only use the first location in the ground and get 4 measurements of voltage between the ground and each of the other 4 channels. I use a USB 6000 which, for now, allows me to use the same pattern for only two channels. Is it possible to use the same pattern for 4 channels?

  Thank you

  Maria

  The images do not explain everything. You must explain what are the sensors. I think you totally wrong on how they should be linked. CSR, all sensors must be a common understanding and the outputs not individual channels as I have already explained. If you are unable to do this, you should probably not use CSR and you have the wrong data acquisition device. If you want a side of a sensor as a reference, you need differential connections.

• Hi, I use Lightroom4 and I can't seem to make one of the photos in the book that I am trying to download on Blurb.  I used the same photo before in other books.  Any help would be appreciated.

  Hi, I am trying to download my Blurb photo book and it does not work.   I use Lightroom4 and recently (and successfully) use the same picture in several other books.  I get an error message that says that the photo cannot be returned.  I don't know if it would work with the rest of the photos, because the one who gets the error message is only the third of about 40 images.  I would appreciate all the advice really.

  Thank you

  Carly

  As I said, I'm never comfortable with special characters like slash, and colon (exception is the underscore), although I have no direct evidence that there is a problem.

  What happens if you rename the photo (using your operating system) to be lake_clouds2.jpg, and then she would have the question mark in LR 4 and you reconnect to the it in LR 4? Renders the picture then?

• HP Officejet Pro 8610: Unclear Instructions online, using the phone fax configuration, how to print envelopes

  Terminology used in the instructions I'm not familiar with.

  Hi @chazz85,

  I'd be more than happy to help you with your configuration envelopes and printing of fax.

  Are there specific terminology that you want me to explain?

  Let's start with the implementation of the fax machine.

  The best market-well because it is in this document to set up a new Fax.

  For me to simplify this configuration for you, I would need to learn more about the installation of your home Tel/fax line.

  • Is he a dedicated phone line? Only used for faxing.
  • Or is it a shared phone line? Phone and Fax.
  • Is your analog phone provider (typical telephone lines) or digital? (Cable connection)

  If the row is shared;

  • You have the distinctive ring service? 2 numbers, same phone line that present different ringtone profiles to indicate the type of incoming call
  • You have an answering machine? An answering voice calls in the same phone number you use for fax calls.
  • You have voicemail? A subscription to voicemail service using the same phone number as the fax.

  The (Simplified) recommended configuration would be;

  1. Telephone jack in the wall (RJ11) connected to line 1 on the printer using the cable provided in the box with the printer

     Then, if any;

  2. Port 2 - EXT on the back of the printer connected to the answering machine (using a phone cable)
  3. Your phone will then connect on the answering machine (once again using any phone cable)

  Once I have more information about your setup I can help you further.

  Now for printing the envelope.

  I recommend the user to the 8610 Guide to show you how to correctly load an envelope. I copied the steps here for you;

  NOTE: If your printer has a second tray (tray 2), do not insert the envelopes for printing in this slot.

  1. remove the main input tray. Remove all existing paper from the tray.

  

  2. Insert the envelopes facing print down and charge according to the chart. Make sure that the stack of envelopes does not exceed the lower line of the marking in the status bar. For more information, see the diagram engraved in the status bar.

  

  NOTE: Do not load envelopes while the printer prints.

  3. slide the paper width guides in the tray until they touch the edge of the stack of envelopes, then re-insert the tray.

  

  4. remove the output tray extension until the planned paper size is reached.

  

  I need to know what program you are trying to print from. If it's Microsoft Word, I find this document print an envelope very useful.

  If it's another program, you can try the manual suggests.

  1 load the envelopes face to print down in the status bar.

  2. in the menu file in your software, click print.

  3. make sure that your printer is selected.

  4. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer or preferences.

  5. Select the appropriate options.

  • Under the layout tab, select Portrait orientation or landscape .
  • On the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar, and then select the appropriate, print quality in the quality settings area.
  • Click on the Advanced button in the paper/output box, select the size of paper in the paper size drop-down list.

  6. click OKand then click print or OK in the print dialog box.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Every day I receive a notice that someone on my computer using the same I.P. address

  Title of the Moose: I. Address of P.

  Every day I receive a notice that someone on my computer using the same I.P. address but yet I found nothing of canoe

  Hello

  (1) work on a domain network?

  (2) how long have you been faced with this problem?

  (3) what is you receive the exact error message?

  Method 1:  If it is a small network of computers on homegroup, contact the person with administrative rights system on your network.

  Method 2:  Make sure that the network card is configured according to the manufacturer's specifications and that the configuration is not incompatible with the other hardware configurations.

  Method 3: Run Microsoft Security scanner (MSS) to any threat and try to correct
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

  Method 4: download and install all available Windows Update

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  If you are working on a domain network, then please post your query on the TechNet forums for more specialized help.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads