ANyConnect Client certificate authentication and verify the Client against the Microsoft AD using DAP via LDAP domain membership

Similar Questions

• Error: Unable to connect to the database.  Please check the databases and verify the database is accessible.

  Hello.

  Hello

  Do you have any idea of this error, I went through a few forums, but I still got the same message.

  FDM is my server on computer A

  and my Foundation + shared on machine B

  
  

  Error: Unable to connect to the database.  Please check the databases and verify the database is accessible.

  Hello

  Browse the following post

  Failed to create the application of FDM

  (mark this message as useful or appropriate if that helps!)

  concerning

  -DM

• ACS 5.3 certificate based access to the network by using AD

  Hello

  Is that what someone has implemented certificate based 802. 1 x network access using ACS5.3 & identity authentication outdoor store like AD.

  If yes then please let me know as soon as possible.

  Ajay

  When you use EAP - TLS AD may come into play in one of two ways

  -There is an option to perform a binary comparison on the certificate of the client against a stored in AD (or LDAP)

  -It is possible to retrieve ad for the user groups and use this in authorzation

  Configuration for this is done as follows:

  (1) establish a profile of certificate authentication:

  Users and identity stores > profile of certificate authentication

  In the profile to define the "main Username attribute" - attribute that identifies the user

  Can optionally select "Perform with certificate certificate binary comparison comes from LDAP or Active Directory"

  (2) if want to do authorization based on groups of ads, then need to create a sequence identity

  Users and identity stores > sequence identity store

  In 'List of authentication method' select 'Certificate based' and select the profile of step 1

  In "Attribute retrieval research additional list", select Active Directory in the list of selected stores

  (3) select the sequence of the identity as the result of identity politics. For example, for the strategy set by default:

  Access policies > access > by default access to network > identity

• Security How can I remove the copy and paste the files I used?

  Security How can I remove the copy and paste the files I used?

  I can't get rid of all the e-mail addresses I have copied and pasted.  No matter what I will always appear if I hit paste again.  This is a shared computer and I would rather not have my copy and paste the files stored on the computer, after that I quit.

  Thank you

  Hi Ron,

  You can copy or move information (for example, text and pictures) between files and programs using temporary storage called the Clipboard. The Clipboard is not visible, so even if you use it to copy and paste information, you never actually see the Clipboard when you do this.

  The Clipboard contains a block of information at a time. Whenever you copy information to the Clipboard, the old contents of the Clipboard is replaced by the new information.

  When you shut down the computer everything is stuck in the memory of the Clipboard is cleared.

  Please click the below mentioned link to get an overview of the clip board memory.

  http://Windows.Microsoft.com/en-in/Windows7/copy-information-between-files

  Answer please if you have any questions.

• Is it possible to start and stop the servers without using nodemanager?

  Is it possible to start and stop the servers without using nodemanager? If so, how?

  Hello

  Please follow the link below, it will be useful

  http://docs.Oracle.com/CD/E1322201/wls/docs81/ConsoleHelp/startstop.html#1243161_

  Concerning
  Fabian

• hide and show the icon view using if else statement

  is - it possibleto hide and expose the display icon using if else statement? I try to use erase them but I don't know how show it on again after that I want to come back. Thank you

  There are two functions... EraseIcon and Exposeicon

  Mike

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• Client certificate authentication and proxy HTTPS WSA

  Hello

  on a clients site, we have a virtual Proxy WSA with WCCP running behind a firewall of ASA. Only we are facing a problem: the customer has a site that authenticates the client through the certificate. It does not work. If I dasable the transparent proxy for this host, everything works fine.

  I solved it now bypassing the proxy server for the spicific site. Is there another solution to allow clients to authenticate using certificates to a Web site?

  Hello

  Does it means that websites (some sites) request for client certificate to authenticate during the SSL negotiation?

  If this is true, can you check your option since default CLI interface HTTPS when HTTPS servers request certificate of the client during the handshake, WSA will respond with unavailable certificate and the handshake will normally be breaks.

  To check this:

  1. log in to the CLI
  2. control of type advancedproxyconfig
  3. type HTTPS
  4. keep pressing enter to accept the value by default until you reach "measures to be taken when the HTTPS servers request certificate of the client during the handshake:" and change it to "get through the operation.

  5. keep pressing enter until the initial scope guest
  6. type commit to save the change.

• Failed Anyconnect corresponding certificate does not deny the user

  Hello

  I'm trying to implement matcing certificate when you use Anyconnect.

  I want ASA to check the issuer CN to a value.

  I have it configured, and it works.

  But when the corresponding defective certificate, the user still have access. It connects to the GRP_policy 'GroupPolicy_solbakken-any-test', but it should have failed.

  The log looks like this

  09:28:04 | 716001 | Group user IP <62.148.39.161>WebVPN session began.
  09:28:04 | 734001 | DAP: User Øystein solbakken, 62.148.39.161, connection AnyConnect Addr: following DAP records were selected for this connection: DfltAccessPolicy
  09:28:04 | 716038 | Group user IP <62.148.39.161>authentication: success, Session type: WebVPN.
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 113009 | AAA recovered in group policy by default (GroupPolicy_solbakken-any-test) for user = Øystein solbakken
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 725002 | 62.148.39.161 | 65223 | Complete appliance SSL negotiation with customer Internet:62.148.39.161/65223
  09:28:04 | 717028 | The certificate chain has been validated successfully with the warning, revocation status has not been verified.
  09:28:04 | 717022 | Certificate has been validated successfully. Serial number: 2266234A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = lund, dc = local.
  09:28:04 | 302014 | 62.148.39.161 | 6875. 89.248.2.6 | 443. Connection TCP disassembly 2213 for Internet:62.148.39.161/6875 to identity:89.248.2.6/443 duration 0: 00:00 4448 TCP Reset bytes - I
  09:28:04 | 725001 | 62.148.39.161 | 65223 | Count of negotiating SSL client Internet:62.148.39.161/65223 TLSv1 session.
  09:28:04 | 725007 | 62.148.39.161 | 6875. SSL session with client Internet:62.148.39.161/6875 is complete.
  09:28:04 | 302013 | 62.148.39.161 | 65223 | 89.248.2.6 | 443. Built of TCP incoming connections 2214 for Internet:62.148.39.161/65223 (62.148.39.161/65223) at identity:89.248.2.6/443 (89.248.2.6/443)
  09:28:04 | 725002 | 62.148.39.161 | 6875. Complete appliance SSL negotiation with customer Internet:62.148.39.161/6875

  Can someone help me with this? I only want users successfully matching certificate to connect, all others should be rejected.

  Concerning

  Øystein

  Hi Øystein

  You can by mapping all users to a group that does not have a connection, for example:

  internal DenyAccess group strategy

  Group Policy attributes DenyAccess

  VPN - concurrent connections 0

  tunnel-group NoAccess type remote access

  tunnel-group NoAccess General attributes

  Group Policy - by default-DenyAccess

  crypto ca certificate map mymap 65535
  
  subject-name ne ""
  
  webvpn
  
  certificate-group-map mymap 65535 NoAccess
  hth
  
  Herbert
  

• Only IPSEC AnyConnect VPN certificate authentication

  How can I activate "authentication certificate only" for AnyConnect IPSec IKEv2 VPN connections, so that users do not have to enter the user name and password.

  Basically, deploy the CA, and then deploy the VPN.

  This example uses the Microsoft CA, but you can use the built in place.

  https://supportforums.Cisco.com/blog/152941/AnyConnect-certificate-based-authentication

• How to set up and test the Profibus network, using the number of piece OR interface master/slave 780161-01

  I bought this card of NEITHER. I've been in contact with Comsoft which apparently is the developer of this Council. I used the Configurator II to try to build the network. The GSD file for my slave is entered. I can also see the GSD file for the master. There seems to be no obvious way to test the bus of the configuration tool. I tried the Express VI provided by Comsoft. Nothing happens. I have a purchased with endings installed profibus cable. I know that the works of cable as a another division has an another Profibus master that works with this cable how to configure correctly for you? How to test?

  Thank you

  Rick

  The problem has been resolved. In the configuration tool, after the slave device is connected to the network, all of the attributes listed under it must also be dragged over and placed in the list that appears. Never seen this step in the documentation. Once this has been done the configuration tool could initialize and find the slave.

  Rick

• How can I pause and resume the analog output using DAQmx?

  I use a DAQ hardware to produce an analog waveform.  I would like simply to break the output of the wave and then resume where it left off.  I use DAQmx and LabVIEW 2011.

  I've seen examples that use a digital or analog break trigger, but I would take a break in the software only.  How can I do this?

  -Joe

  Hi Joe!

  I spent some time thinking about it and I realized that you can technically use a fundamental mission of the analog output, as you previously wrote that runs continuously. However, the generated output samples are controlled by the sample clock pulses, and can be manipulated to fit our needs "suspension."

  To do this, we will need another counter task that generates a pulse train (see our examples of shipping under material input and output > DAQmx > generating digital pulses > generate dig Pulse Train - Continuous.vi) that stops and starts the user to choose. This can be in another quite VI or controlled by software. We will use this as the task of our output sample clock.

  Then, the task of the AO, wire a constant to the sample clock source and select ' DevX/CtrXInternalOutput"based on the counter that you specified in the task of counter. You will need to choose "I/o name of filtration" and check the box that says "include advanced terminals' and right-click of the constant. See picture attached as a reference. In this way, the task of the AO is constantly running, but it generates only actually all data when the meter running task.

  

  Let me know if you have any questions!

  Have a great day!

• Installed Windows Update and now the computer crashes, used to start

  Ideas:

  • : Last night, I installed 2 latest updates of my system (one of them could be KB971644, not too sure though) and after installation, I was prompted to restart. I did it and when it came there's a blue screen saying that windows is trying to fix the problem automatically. He could not fix the problem and so he stopped. Now every time I turn on the computer it trys to automatically repair the problem and fails and stops. I can't do a system restore, as I have no restore points, it is said. I don't want to lose all my programs and delete the files by doing a complete system. Any help would be appreciated thanks. I have windows vista 64-bit and a HP computer. you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  You can try this I hope it will work

  Turn on your computer and press F8 on the keyboard when your computer starts up and displays the brand of computer, then scroll using keyboard keys to the last known good configuration, and then click on enter if this does not work and it is not back to try again and instead of select last known good configuration click on repair computer at the top and press on enter.

• When I try and get the Microsoft Messaging support, he asks me a 20 digit number. When I enter this number, he told me that he is not registered in the country I've selected.

  I have Dell XPS M1330 with windows vista home premium. When I try to get the support of e-mail on the microsoft support site, he asked 20-digit PID number, when I entered that number, it says this PID is not saved in the chosen country, I m from India, I chose India-English. I also tried in the United States, United Kingdom, but whenever he says the same thing. I can't support for the supplied windows pre-loaded with my laptop. I ve the product key and PID number. Pls guide me to do this, my windows is enabled.

  original title: Support of Windows problem

  Reference Dell are responsible for their OEM of Windows versions. Microsoft supports the commercial versions of Windows. I'm not familiar with the details of the software support arrangements, but it is the basis that applies.

  What is the problem?

• WLAN file Device Manager, until I restart the machine and deletes the wifi while using it 3 times a week and no diagnosis to see where is the problem

  I think someone put the wrong card in this or changed when I bought it was 3 weeks ago. dw1510 card wlan and broadcom driver date tried 2008 update and does not say supported.makes no sense not supported. Why wifi falls and have to restart are beyond me. I ask those with same past answer questions and if your card is different from dw1510 tell me your card. LAN hardware card. AND WHEN I TRY TO INSTALL THE DRIVER FROM DELLS FOR HIM, IT SAYS HARDWARE NOT SUPPORTED. GO FIGURE?

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with WLAN.

  To help you better I would like to know the details below.

  1. What is the brand and model of the computer and the Wi - Fi router?
  2. You get no matter what code/error message when disconnecting a Wi - Fi connection? If Yes, then give the complete error message/code.
  3. You did changes to the computer before the show?

  I ask you to perform the following steps of the Microsoft Help article and check if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Meet us with results to help you best.