AnyConnect & FIPS

Similar Questions

• FIPS. You can configure an ASA in accordance with FIPS to reject all connections non - FIPS Anyconnect

  Hi dude, is he not automagically to refuse any connection Anyconnect an ASA compliant FIPS if the Anyconnect client is non-FIPS compatible?

  Any help, ideas or thoughts are appreciated because I can't seem to find something to think about as you can.

  Kind regards

  Paul.

  Hi Paul,.

  By default, the ASA specifies the non-compliant FIPS RC4-SHA1 for the connection. To comply with FIPS, you must make sure that a compatible encryption FIPS is the first specified in the list of SSL encryption. Otherwise, the DTLS connection fails. In addition, we recommend that you remove all non-FIPS list ciphers in order to ensure that the connection failed does not occur.

  In ASDM, go to Setup > remote access VPN > advanced > settings SSL to specify the types of SSL encryption. In the encryption area, move a FIPS compatible encryption at the first position in the list.

  If you use CLI, use the encryption ssl from the global configuration mode command to order the list.

  Kind regards

  NGO

• should what AnyConnect I download?

  Hello

  I am trying to download a cisco.com AnyConnect 2.5. I noticed that there are several versions for the anyconnect as below:

  AnyConnect-EnableFIPS-win - 2.5.2010.exe

  AnyConnect-dart-victory - 2.5.2010 - k9.pkg

  AnyConnect-Gina-Win-2.5.2010-pre-deploy-K9-lang.zip

  AnyConnect-victory-vpnapi - 2.5.2010.zip

  And there are a few new, EnableFIPS, dart, gina and vpnapi words. Do - this word position, please?

  Rgds,

  -Alejin

  AnyConnect-EnableFIPS-win - 2.5.2010.exe--> FIPS (Federal Information Processing Standard), a United States federal government standard/AnyConnect version. To do this, the ASA to be licensed with FIPS.

  AnyConnect-dart-victory - 2.5.2010 - k9.pkg--> 'dart' version is intended only for troubleshooting and required only if you want to troubleshoot on the anyconnect package.

  AnyConnect-Gina-Win-2.5.2010-pre-deploy-K9-lang.zip--> this version is a version that you can preinstalled on the PC of the client manually.

  AnyConnect-victory-vpnapi - 2.5.2010.zip--> it's an API for GUI programming.

  The version you need to download the ASA is "anyconnect-victory - 2.5.2010 - k9.pkg. This will allow the user to use the browser to access your ASA outside the ip address of the interface, and it will automatically download and install the client anyconnect on the user's computer.

  Hope that helps.

• iCloud and FIPS 140-2

  Apple iCloud meets FIPS 140-2 encryption level? If so, does anyone have a written evidence (for example PDF, link to the website of Apple, etc.) Apple that confirms this?

  Start to read - certifications of product safety, validations and iOS - Apple Support tips & https://www.apple.com/business/docs/iOS_Security_Guide.pdf.

  If these articles don't satisfy your curiosity, then email [email protected]

• I changed master PW and something went very wrong; keeps asking me for FIPS 140 page does not load. Help

  Today, I changed master PW. I'm sure that I entered old master PW properly and new (twice) correctly entered also.

  Apparently, he did not. Something very wrong. I can not load the page, get the message:
  Required PW: Please enter the m for encryption FIPS 140 pw, key and.

  I write everything down, I tried to go home, but nothing.

  I also remember old master PW.

  IN ADDITION, I CANNOT CLOSE FIREFOX, CONTINUE TO SEE MAC OSX "PINWHEEL"...

  HELP ME PLEASE.

  Hi Cor - El
  I want to thank you for taking the time to write this easy to follow the answer. I went directly to the folder via the specified path, tire/secure the 2 files deleted and found I could enter a new master pw without any problem.
  I also read that this (and the previous) FF master pw modification is not allowed...
  Well, damn. Guess that's why it is important to read the instructions FIRST.
  Thanks again.
  GirlWithDragonTattoo

• I HIT ACCIDENTALLY ACTIVATE FIPS UNDER SECURITY/TAB ENCRYPTION DEVICES.

  OK in tools, I went to the options. In options, in the advance on the encryption tab tab, I clicked the safety devices. In this you can click on a safety device and sign in, sign out, change password, load, unload, enable FIPS. I hit accidentally activate FIPS, he asked me my master password and I entered.

  Close and re-open Firefox, then back to the box of safety devices - you should be able to click on Disable FIPS.

• HotSpot iOS 9.3.1 works do not with Cisco AnyConnect

  Does anyone else have this problem? Since the upgrade to 9.3.1 iOS I am more able to use one of the hotspot from my iPhone to connect to the VPN from my company using Cisco AnyConnect.  I can still connect via Wi-Fi, but not with the iPhone 5s or 6s hotspot feature.

  Ideas?

  TIA,

  DM

  Hello, I'm from the Italy, and I have the same problem on my 5 64 GB iPhone.

  I have updated to iOS 9.3.1 and now I don't have the Hotspot feature in the phone settings Menu.

  What is happen? I work with this feature and now I need to change the phone!

• FIPS

  How to set local security Cryptography

  Hello

  "System cryptography: Use FIPS compatible algorithms for encryption, hashing, and signing"effects of security setting in Windows XP and later versions of Windows.

  http://support.Microsoft.com/kb/811833/BG

  http://support.Microsoft.com/kb/885409/en-us

  Additional assistance may be made by posting your queries to the TechNet Forum

• Chess FIPS and Remote Desktop connection

  I currently enabled FIPS compatible algorithms on my network.  All our machines are running the highest connection Office remotely.  This seems to be very well on servers but trying to control remote in all clients mainly (using Windows XP, but I also if this problem on Windows 7 as well) it fails.  I did all the tests and I can isolate it specifically to the active FIPS policy.  What can I do to get Office remotely functional again on my clients?  So far the only thing work is to temporarily disable the FIPS and then I can remote into the machines again?  I really want to keep the FIPS enabled for its security, but if it's going to inhibit remote desktop it's going to be a major problem.  Thanks in advance to anyone who can solve this problem!

  Hi Metatronx,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• AnyConnect VPN and HP Office Jet Pro 8500 A910

  I can print from my laptop IBM T400 running Windows 7 64 bit. However, when I log in work AnyConnect VPN, I can't print. He says that the printer is disconnected from the network, even if it is connected. IT support at work said he can't change or adjust the VPN settings. The only way I can print is to disconnect from the VPN. Is this what I can adjust on the software of the printer or the printer itself?

  Hello

  To be able to print on the local network when you are connected to a network remote VPN might be possible by changing the VPN split tunneling configuration.

  However, it is depands on the VPN features and cannot be authorized because of the security requirements of your IT Department.

  Anyway, there is no way to configure such a thing by the printer or the printer software... It is directly affected by the configuration of the network and therefore require to modify VPN settings.

  Kind regards

  Shlomi

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• ACLog.dll missing killing Cisco Anyconnect Secure Mobiltiy customer

  I use 'Cisco AnyConnect Secure Mobility Client' on Windows 7 for a year now with no problems.
  All started yesterday when I try to connect I get this error message:

  dialog title: vpnui.exe - system error

  message: "the program can't start because aclog.dll is missing on your computer.  Try reinstalling the program to fix this problem. »

  So, of course, I tried to reinstall, but without success.

  I keep reading that aclog.dll is a windows system dll.
  No idea how to solve this problem?

  I installed Visual Studio SP1 of 2015, the other day and it looked like there were a few errors in the final dialog box.  Would he have the issue?

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Cisco AnyConnect disabled after the installation of update KB3092627

  After the execution of automatic updates on 03/10/15, AnyConnect would not start and was not in my system tray. I uninstalled the update (KB3092627) and the returned icon and am now able to use Cisco AnyConnect. Anyone know if there is a specific problem here and I need the update?

  Hello

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• FIPS compliance for the blackBerry Passport

  Anyone know if the Passport is FIPS compatible for the moment?

  Maybe this will help you? BlackBerry 10 receives FIPS 140-2 Security Certification before launch

• OME - when FIPS compatible?

  Delisle Dell support,

  Do you know when will release the latest version (or patch)? I hope soon! I ask because I have installed Dell Openmanage Essentials version 1.2.1 and our society requires FIPS is enabled on MS OS' are. So for the moment it does not work, and I can't make an exception in the GPO have FIPS disabled for the server with OME (or any other for that matter).

  OME helped my Department a little during the new server implementation of the last year worldwide and is become a useful tool!

  Sincerely,

  Lwielewi

  Here is a workaround without modifying the GPO:

  If you wish to continue using the wide field you can make a change on the OME 1.2 server in the machine.config file.

  Make a backup of this file and open it:

  Path: C:\windows\Microsoft.NET\Framework64\v4.0.30319\Config\machine.config

  Replace this section:

  Make it look like this:

  
     
     

  Note: The operations to copy / paste don't work well with this file manually type in the code. Notepad or VIM (for Windows) has worked well for me.

  Once changes are made if please issue an IISRESET and restart all the services of OME. This will disable FIPS for that specific server and require no changes to the GPO.

  Kind regards