Redirect Cisco Wireless 1.1.1.1/login.html problems

Similar Questions

• Is it possible to use a Linksys by Cisco Wireless - G Internet home monitoring camera with Labview

  I was wondering if it is possible to use a "Linksys by Cisco Wireless - G Internet home monitoring Camera" with Labview

  http://www.dabs.com/ProductView.aspx?quicklinx=53PX&SearchType=1&searchTerms=network+cameras&PageMod...

  I wan't to be able to get the raw data from the camera and analyze it.

  I found a simple soloution to this problem,

  Is possible to use a web browsers invoke node basically give a screenshot of the web page (get image)

  It can then be loaded into a display of the image and will show exactly what the web browser is showing and can also be analised by unflattening the pixmap.

  Maybe it's not the most effective method, but he turns my rig fast enough and does the job

  It may also be a setting value of the display of the photo to "smooth updates" that gets rid flashes white as the changes to the image, if anyone else has this problem.

• Cisco Wireless-N bridge for phone adapters firmware update problem

  Hello

  I have a bridge for phone adapters N of Cisco wireless. I decided to update the firmware on the device. I downloaded it from the official website of Cisco download page. So I've just connected to the device and started the update procedure. I waited for the right amount of time allowing the aircraft to install a new firmware.

  Now the wireless bridge will not start. Once powered up system LED will blink green for 15 seconds. Then it will become orange and flashes with a frequency higher than forever.

  I tried factory reset, but it does not work: same behavior remains.

  As a note - I have updated exactly same device with exactly same firmware just before I did this and it went good - firmware is not a reason for this behavior.

  Can anyone advice me on what I can do to give life to this device?

  Hi Nikolai,

  If the unit is still under warranty I suggest you to contact Small Business Support Center and open the ticket as most likely the replacement is necessary:

  http://www.Cisco.com/c/en/us/support/Web/TSD-Cisco-small-business-suppor...

  Kind regards

  Aleksandra

• Are Cisco 1130ag APs compatible with Cisco Wireless LAN Controller virtual?

  Are Cisco 1130ag APs compatible with Cisco Wireless LAN Controller virtual?

  It's... AP compatibility depends on the code that runs on the WLC. This is a matrix that is a good reference.

  http://www.Cisco.com/en/us/docs/wireless/controller/5500/tech_notes/wire...

  Sent by Cisco Support technique iPhone App

• CISCO WIRELESS SOLUTION

  Dear experts,

  I want to give a solution to one of my clients. But I am new to cisco wireless. I list the products below. This will fill requirement

  I have a doubt, can I could put AIR-AP1262N-N-K9 to LWAP and can connect this AP to WLC (AIR-WLC4402-12-K9)?

  It is urgent please suggest.

  AIR-AP1262N-N-K9	802.11a/g/n Standalone AP; Ext Ant; Domain N Reg
  AIR-ANT2422DW-R	2.4 GHz 2.2 dBi rotating dipole white antenna, RP - TNC
  AIR-ANT5135DW-R	3.5 GHz 5 dBi rotating dipole white antenna, RP - TNC
  AIR-AP-SUPPORT-2	1040, 1140, 1260, 3500 universal, mounting bracket
  AIR-AP-T-RAIL-R	Clip of grid ceiling for Aironet APs - (default) recessed mounting
  S126W7K9-12425JA	NETWORK without WIRE Cisco series 1260 IOS
  CON-SNT-AP1262N	SMARTNET 8X5XNBD 802.11a/g/n Standalone AP; Ext Ant
  Product code	Description
  AIR-WLC4402-12-K9	4400 series WLAN controller for up to 12 Lightweight APs
  AIR-PWR-CORD-AP	AIR Line Cord Asia - Pacific (APAC)
  SWLC4400K9-60	Cisco Unified WLAN controller SW version 6.0 - MD
  SWLC4400K9-60-ER	WLAN controller of emergency SW for 4400 - ED
  CON-SNT-WC440212	SMARTNET 8X5XNBD 4402-12 WLAN controller
  Product code	Description
  POE-180 X =	802.3af PoE Module, power 80W power supply and cable
  ACR-AC2E	AC Europe power cord
  GLC-SX-MM-RGD =.	1000Mbps SFP robust multi-mode

  Yes.

• External javascript file in the page login.html Campus Mobile

  Hello

  
  

  We try to load an external javascript file of Mobile Campus of Oracle application login.html page.  The code works in the Android app, but not the IOS app.  Here is a code snippet:

  Can you offer any help on how we can get the javascript code to load correctly for iOS?  The code is not local to the application is because we're going to make changes so that it displays various messages on the login page at different points throughout the year.

  Thanks for any help you can provide!

  Just wanted to give everyone an update and let you know that we have understood the question.

  in the file Application.xml - MAF, we added our URL to the white list (Security tab).  This allowed the application to invoke successfully the javascript code for the external file.  I hope it is useful to someone, as it seems to help others / Oracle support on this forum is unlikely.

• My wifi limited shows, no card wireless for internet access or access point problem

  Hi, I tried to connect with wifi, it shows connected but wrote 'limited' by the side. and below his writings no internet no access. I tried troubleshooting but it says wireless access point or no fixed adapter problem. can sum1 if you please help me with this problem

  Hi Dimma,

  What is the brand and model of your computer?

  This could be caused due to various reasons.

  -Due to the wireless router settings.

  -Due to the IP address.

  Follow the following troubleshooting methods:

  Method 1: I suggest you to reset the wireless router and check if this solves the problem manually.

  Consult the router's manual to know how to manually reset the router.

  Method 2: Reset TCP/IP and check if this solves the problem.

  Follow these steps:

  a. press the Windows key (start screen will popup), type cmd on the right click of the screen prompt, select run as administrator.

  b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  c. Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  d. restart the computer.

  
  

  Method 3: If you use WEP encryption change to WPA or WPA 2.

  Hope this helps and let us know if you need help. We will be happy to help you.

• After changing the login.html-> error login.jsp: MDS-00013

  Hello
  
  When I change my login.html to login.jsp I get 404 and a strange error during disconnection:
  
  java.io.FileNotFoundException: MDS-00013: no metadata not found for the metadata object ' / login.jsp.
  
  I use the following code to close your session, my Welcome.jspx file is secured and only authenticated users get access:
  
  public String performLogout() {}
  
  FacesContext ctx = FacesContext.getCurrentInstance ();
  HttpServletRequest request = (HttpServletRequest) () .getRequest () ctx.getExternalContext;
  HttpServletResponse response = (HttpServletResponse) ctx.getExternalContext (m:System.NET.FtpWebRequest.GetResponse ());
  LogoutUrl = string ' / adfAuthentication? Logout = true & end_url=/faces/Welcome.jspx ";
  sendForward (request, response, logoutUrl);
  Returns a null value.
  }
  
  Web.XML:
  <>login-config
  FORM < auth-method > < / auth-method >
  < form-login-config >
  login.jsp < form-login-page > < / form-login-page >
  error.html < form-error-page > < / form-error-page >
  < / form-login-config >
  < / login-config >
  
  
  When I use a file login.html, all right.
  
  Joost

  Hello

  here needs to change

  Login.jsp

  TO

  /faces/login.jsp

  assuming that login.jsp contains JSF components

  Frank

• Cisco Wireless router model WRT120N guard give up Internet connection

  My wireless router will work for 6-8 hours, and then remove the connection to the internet.   I switch the modem and the router several times to re-establish the connection.  I'm also using a Netgear Access Point.

  I use:

  Charter high-speed Internet

  Motorola Modem

  Model Cisco WRT120N router

  Parameters

  Mixed-mode

  Channel Auto width - 20 MHz or 40 MHz

  Security - Personal WPA2

  Disabled SSID broadcast

  Firmware Version v1.0.04

  Automatic connection Type - Conf DHCP

  Beacon interval - 50

  Fragmentation threshold 2304

  RTS threshold 2304

  All other settings are default.

  When I unplug the modem to the router and plug it on the desktop I have internet service.

  The connection is also falling only on wired or wireless?

  Try to update the firmware on your router.
  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Cisco Wireless Lan Controller 2504

  Hello:

  Hello; I lost the password to my wireless LAN controller. Everything was fine until a few days ago and now can not identify.
  Is it possible to recover. The model of controller is AIR-CAP2602E-A-K9, the software version is 7.4.110.0.

  Please, anyone, help me.

  Kind regards.

  Fernando.

  Check this box:

  http://www.my80211.com/Cisco-WLC-CLI-commands/2009/12/27/recover-your-WL...

  Concerning

  Remember messages useful rates

• Version of the software Cisco Wireless LAN controllers &amp; Licensing (controllers HA and APs Adder &amp; licenses basic questions)

  In fact, one of my clients has two Cisco 5508 wireless LAN controllers installed in a site and back up and running now. one of them running software version 7.4 and the other running software version 7.6. Each of them works as a stand-alone controller with number of access points. Based on this scenario, answer below concerns:

  • Can we transfer all active licenses at one of them and use it as a HA free of charge?

  • Up to which version of the software, we can improve these controllers without any extra charge?

  • What we must do if we want to move two of them to version 8 software?

  Waiting to hear from you soon about my concerns.

  Here are a few notes:

  -Only licenses Adder can be reheberges to another controller. Base license cannot be rehosted unless the unit is THAT RMA would be.

  -Too long the WLC has a minimum of 50 access point license, so that the unit can be used for HA N + 1 or AP SSO.

  s ' it use SSO of AP, the WLC must have connections to subnets for layer 2 even due to the IP address of the interface.

  HA N + 1 can be used in sites different especially if the subnet do not align

  -Scott

• Software for laptops new Cisco wireless card

  Given that the new laptops have more the PCMCIA slots and Cisco does not sell a compatible card, at least no I can find, will be their tool of survey construction with integrated maps?  I need to do a site survey for the implementation of a MESH and do not have the software more, mine succumbs to a terrible death.

  will their site survey tool work with the built in cards?

  N °

  You want to create a fancy report?  If Yes, then your next stop will be Airmagnet Wireless Site Survey of Fluke

  If the answer is no, then a simple proggie as Netstumbler and inSSIDer will be sufficient.

• Cisco Wireless - E2500 N Dual Band router and hide the SSID

  Hello

  I tried to hide my SSID by allowing emissions the SSID of the first, and then the other band.

  Once I have say-activated the SSID broadcast of the last band my laptop, which has the wireless card, would lose connection to the internet on reboot.

  I read somewhere, but now can't find the article, you can hide those SSID, but it requires some work to connect to a network that is more diffuse.

  Someone has knowledge on how to go about this, or maybe they could point me to a resource that explains how to set this up... thanks.

  Tom.

  The properties of the wireless network. Check "Connect even if this network is not broadcast".

• (Redirected) Dell Wireless 802.1 1705 1 b/g/n (2.4 GHZ)

  Will be wireless Dell 1705 802.1 1 b/g/n (2.4 GHZ) to connect with a 5 G bandwidth?

  Best of this post in the Forum Networking, Internet, wireless, here:

  http://en.community.Dell.com/forums/3324.aspx

  Bev.

• (Redirected) Card wireless necessary Inspiron 3537 w/Win 7

  What type of wireless card can be bought for Inspiron 3537 with Windows 7 operating system?

  Hi Debbie Denman.

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518