OME - when FIPS compatible?

Similar Questions

• Get the message to disable FIPS by connecting to the Internet

  Original title: error message

  When I connect to internet, I get a window message saying I should disable fips & to go click on Administrative Tools control panel, I can't do it as I am new to this sort of thing, can someone help me please. Another problem I have is with my emails if I have to open an image, I get the point, but it doesn't allow me to go to see. I don't know how to tackle these problems. Help, please.

  Hello Ann,.

  1. what browser do you use to visit Web sites?

  2. were there any changes (hardware or software) to the computer before the show?

  Question: disable FIPS

  Disabling FIPS in administrative tools may help get the problem solved.

  Perform the steps below, if you are using Internet Explorer.

  Method 1: Perform the steps mentioned below and see if it helps.

  a: Open Internet Explorer

  b: Then click on Tools > Internet options

  c: Under the tab Advanced , under Security, make sure that the following check boxes are selected

  • Use SSL 2.0
  • Use SSL 3.0
  • Use TLS 1.0

  d: Click applyand then click OK.

  Method 2: Perform the steps mentioned below and see if it helps to get the problem solved.

  a: Press the Windows key + X

  b: then click on Control Panel

  c: Click Administrative Tools, and then double-click local security policy

  d: In local security settings, expand local policies, and then click Security Options

  e: Under the policy in the right pane, double-click on System cryptography: Use FIPS compatible algorithms for encryption, hashing and signing, and then click disabled.

  I pnnc: can not display the image in the email

  What mail client do you use to access the mails?

  Method 1: Download the image to the desktop and now try to open it.

  Method 2: Right-click on the image, choose open with.

  Select Windows photo viewer and check if the image is opened.

  Method 3: Check if your antivirus software is blocking the file.

  Disable third-party security software

  un) taskbar next to the clock on your computer screen system...

  b) you'll see the third-party security software icon.

  c) click the third-party security software, you will see a pop up.

  d) that pop and select the option to disable, click on it.

  Now the third-party security software will be disabled.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If you have questions related to Windows, please do not hesitate to post. We're here to help.

• HP OFFICE JET 4620 is not compatible with windows 8.1

  Does anyone know when a compatible driver for Windows 8.1 will be available for the office jet 4620?

  Thank you

  KIPP

  Hi, it is available now here.

• FIPS

  How to set local security Cryptography

  Hello

  "System cryptography: Use FIPS compatible algorithms for encryption, hashing, and signing"effects of security setting in Windows XP and later versions of Windows.

  http://support.Microsoft.com/kb/811833/BG

  http://support.Microsoft.com/kb/885409/en-us

  Additional assistance may be made by posting your queries to the TechNet Forum

• Chess FIPS and Remote Desktop connection

  I currently enabled FIPS compatible algorithms on my network.  All our machines are running the highest connection Office remotely.  This seems to be very well on servers but trying to control remote in all clients mainly (using Windows XP, but I also if this problem on Windows 7 as well) it fails.  I did all the tests and I can isolate it specifically to the active FIPS policy.  What can I do to get Office remotely functional again on my clients?  So far the only thing work is to temporarily disable the FIPS and then I can remote into the machines again?  I really want to keep the FIPS enabled for its security, but if it's going to inhibit remote desktop it's going to be a major problem.  Thanks in advance to anyone who can solve this problem!

  Hi Metatronx,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• FIPS compliance for the blackBerry Passport

  Anyone know if the Passport is FIPS compatible for the moment?

  Maybe this will help you? BlackBerry 10 receives FIPS 140-2 Security Certification before launch

• How can I disable FIPS in Windows 7 Home Premium

  I tried to install IBM SPSS Data Collection 6.0 and have had problems with encryption.  IBM has said that I have to disable FIPS in Windows, but I can not find it.

  Hi John,.

  Welcome to Community Forum Microsoft and thanks for posting the question:

  That you want to disable the FIPS try these steps and check:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. click Start, type regedit in the search box start and click on enter.

  b. in the registry editor, navigate to

  HKLM\System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\Enabled

  c. this registry value reflects the current FIPS setting. If this setting is enabled, the value is 1. If this setting is disabled, the value is 0.

  d. disable double click on the file and select 0.

  e. restart the computer and check.

  Visit this link for more information:

  System cryptography: Use FIPS compatible algorithms for encryption, hashing, and signing "effects of security setting in Windows XP and later versions of Windows.

  http://support.Microsoft.com/kb/811833

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Site to Site VPN FIPS 140-2

  Need advice/suggestions on conform to the standard FIPS-140, I configured IPSEC VPN tunnels between routers C2811 and passing traffic unclassified by using encryption, 3DES and SHA MD5 and password shared and mode of transport. Thanks for any help

  Hi Steve,.

  This link will provide you with information about the complicant FIPS algorithms for encryption for theIPSec vpn tunnel:

  http://csrc.nist.gov/groups/STM/CMVp/documents/140-1/140sp/140sp1038.PDF

  (See section 3.3, IPsec and encryption requirements in the above link)

  Following algorithms are not FIPS compatible.

  THE
  MD-5 for the signature
  MD-5 HMAC

  Let me know if it gives you the required information.

  See you soon,.

  Christian V

• FIPS. You can configure an ASA in accordance with FIPS to reject all connections non - FIPS Anyconnect

  Hi dude, is he not automagically to refuse any connection Anyconnect an ASA compliant FIPS if the Anyconnect client is non-FIPS compatible?

  Any help, ideas or thoughts are appreciated because I can't seem to find something to think about as you can.

  Kind regards

  Paul.

  Hi Paul,.

  By default, the ASA specifies the non-compliant FIPS RC4-SHA1 for the connection. To comply with FIPS, you must make sure that a compatible encryption FIPS is the first specified in the list of SSL encryption. Otherwise, the DTLS connection fails. In addition, we recommend that you remove all non-FIPS list ciphers in order to ensure that the connection failed does not occur.

  In ASDM, go to Setup > remote access VPN > advanced > settings SSL to specify the types of SSL encryption. In the encryption area, move a FIPS compatible encryption at the first position in the list.

  If you use CLI, use the encryption ssl from the global configuration mode command to order the list.

  Kind regards

  NGO

• How to restore a full backup of the Server 2008 system that has been stored on a BitLocker Drive encrypted?

  I have a requirement to encrypt my server for transport off-site backups, so I'll try to store my backups to an external drive that is encrypted for BitLocker.  I am doing a test restore to a new drive to simulate a full system recovery, but I'm unable to unlock the drive encrypted with the backup of the prompt under system recovery options.

  I have confirmed that I can unlock the drive from a command inside the original Windows installation prompt using manage - bde.wsf and the recoverypassword, but the same command does not work from the command prompt during the recovery process (started from the installation DVD).  There is no error code, a single message that the recovery key did not work and administrator privileges may be required.

  When you try the same command from another server when connected to that drive, I got an error that can be informative, code 0 x 80310037, implying that the recovery key may not because of the FIPS compatible algorithms that are needed.

  I'm looking for something that isn't possible trying to store the complete system on a BitLocker encypted disk backups?  Any help would be greatly appreciated.

  Thank you
  Jay

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Repost in the Forums 2008 Server at the address above.

  They will help.

  See you soon.

  Mick Murphy - Microsoft partner

• Not entirely taken TLS supported in Cisco IPS 4240

  I am trying to contact a Cisco IPS 4240 device while having security settings FIPS enabled on the client using SSL. This is not possible because the device does not support TLS extensions in the Client Hello packet (RFC 5746) sent by the client when using TLS (SSL3 and lower are not FIPS compatible). The IDM application that communicates with the device does not send these extensions (im seeing this with WireShark) TLS is able to connect to it.

  Is it possible to provide the 4240 support these TLS extensions?

  This is related to the bugs below.  The original solution will be included in the 7.1.5 release which is preparing to take in charge the platform 4240 among others.  This will allow the Web server IPS to ignore short-term extensions.  The long-term solution will require an update to the Web server so that it is fully compliant with RFC 5746.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtt18382

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx43502

  Todd

• View Security Server installation issue 5.2

  I try to get my security server upward and running for 2 days now and continues to run into a brick wall.  I always get the following error:

  Error 28083.  Failed installation of IPsec. Please see the C:\users\...\...\vminst.log file for more details.  The journal reveals 'error: could not get a satisfactory response from the connection to the server after the installation of IPsec "

  In an effort to solve the problem, I welcomed the Windows Firewall on the Security Server and the connection to the server to allow all incoming connections.

  I checked that all the Back-End firewall configurations are correct and functioning as required.

  I scrolls http://communities.vmware.com/thread/405121?start=15 & tstart = 0 and made the changes recommended in this thread.

  When I remove completely all GPOS from the connection to the server, then I can successfully create the pairing between the server security and the connection to the server.

  Most of the people looks like it's a start for GPO setting to walk through them.  Well, I have several GPO that is applied in order to be compliant STIG.

  What I'm looking for is, can someone please point me in the right direction as to what the parameters might affect IPsec communication between the 2 boxes?

  Thanks for the help.

  After calling and by opening a ticket with VMware, it seems that I was able to successfully install the Security server.  After they looked through different GPO settings several that have been applied, I changed the setting below and has been able to correctly install after you run gpupdate/force on my login server.

  Options Configuration/policies/Windows Settings / Security Settings / Local Policies/Security / Cryptography system system cryptography: Use FIPS compatible algorithms for encryption, hashing, and signing

  My setting has been activated.  I changed it to disabled and it seemed to solve the current problem.

• ORA-01017 with managed provider 4.112.3.60.  Bug with the ODP on Win 2008 R2?

  I have some difficulty with the provider to manage and I can't understand what is causing the problem.

  Initially, the managed provider seems to be a drop in replacement for the unmanaged provider.  However, when we moved the code to our test environments, the application started fail with an error 'connection refused '.

  Our dev machines are 64 bit Win 7 and Win 2008 R2 our test machines.  The DEV machines do not have problems connecting to the database with the same connection used in the test environment string.  I can connect to the database using sql more with the connection string used in the application.

  I'm at a loss on how to trouble shoot this.

  Thank you.

  Jon

  I think I know what is happening here. It looks like the algorithm AES is used to encrypt the password when connecting to the database. The implementation of the AES in .NET is NOT FIPS compatible, which causes problems in the public sector (I noticed you were in the Government, as I am). The only way that I was able to work around this problem was put off from the application of the strategies of FIPS (http://msdn.microsoft.com/en-us/library/hh202806.aspx.) The joys of security...

• Firefox sync fails to connect to the server.

  Firefox sync has not worked on my laptop for the last days. It fails with the error
  "Unable to connect to the server. Synchronize automatically retrying this action. »
  Sync works fine on my Android device on the same network. I tried to disconnect and reconnect my sync account and also tried to synchronize in safe mode without success. The error in the synchronization log report: https://pastebin.mozilla.org/8834320.
  About: config the services.sync.clusterURL is not set. services.sync.tokenServerURI has the value default 'https://token.services.mozilla.com/1.0/sync/1.5'.

  Understand the problem. I had activated FIPS compliance on my software security device. Apparently, WeaveCrypto used by sync is not FIPS compatible. I disabled FIPS now and sync works fine. Bug report: https://bugzilla.mozilla.org/show_bug.cgi?id=443386

• Why my google toolber has been restored since my upgrade?

  I upgraded to your ' firefox 5' and was informed that my google toolbar was not "compatible", but he would be reinstated when made compatible. " When will it be?

  The Google toolbar "not build on Firefox 5 and later versions."
  
  http://googletoolbarhelp.blogspot.com/2011/07/update-on-Google-toolbar-for-Firefox.html

  http://www.Google.com/support/toolbar/bin/answer.py?answer=1342452 & topic = 15356% 29

  See this article for alternatives:
  
  http://KB.mozillazine.org/Using_Google_Toolbar_features_without_toolbars

  See if this extension gives you the features of the Google toolbar you want:
  https://addons.Mozilla.org/en-us/Firefox/addon/Googlebar-Lite/

  GBookmarks (Google Bookmarks for Firefox)
  
  https://addons.Mozilla.org/en-us/Firefox/addon/GBookmarks-Google-Bookmarks-fo/