AnyConnect forget URL

Hello, I have a question which intermittently the anyconnect (2.5.0217) client will 'forget' the URL and the user must retype.

for example, the connection to: tell VPN.company.com/ict and users can connect without a problem. Time to time, it is up to VPN.company.com

I can't find a pattern or a reason why it happens. Someone at - it help him?

Thank you.

Hello

I think that when you use the Cisco AnyConnect VPN Client and enter an address and user name, the program writes first and XML-file parameter and use it in the future.

Mines in:

C:\Users\\AppData\Local\Cisco\Cisco AnyConnect VPN Client\

The name of the file is Preferences. If you delete it and restart the AnyConnect customer information fields will be empty.

If now, you enter the data and connect to the VPN once, it will record the data in a new Preferences file on the folder above with the data you just entered.

EDIT:

For example, the preferences file contains the following lines:

Tags: Cisco Security

Similar Questions

Can not type 'url-list' without client Anyconnect VPN setup

Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'url-list', I can't enter.

Here is example of Cisco:

WebVPN
allow outside
list of URLS ServerList "WSHAWLAP" cifs://10.2.2.2 1
list of URLS ServerList "FOCUS_SRV_1" https://10.2.2.3 2
list of URLS ServerList "FOCUS_SRV_2" http://10.2.2.4 3

Here's my ASA:

VPNFW-70/PRI/Act(config-WebVPN) # url -?

set up the mode commands/options:
URL-block url-url-cache server

My ASA has no choice of the list of URLs when you type '?

Can anyone give me some suggestions? Thank you.

http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

Hello

In the 7.x code all customizations without client was included in the running configuration.
However, referring to this document from cisco:- http://goo.gl/XRkrcO, you can see that this command has been deprecated in 8.X ASA codes.

The best way to configure the bookmarks will use the ASDM or create them on a server and then bring import them to ASA.

Why we can not create bookmarks CLI?

With the introduction of 8.x many more options have been added, allowing greater flexibility. These new options would make the running configuration passes, so they were moved into separate xml files. Indeed, it eliminated the ability to configure a list of bookmark via the CLI.

For more information on this discussion, please refer to this thread: -.
https://supportforums.Cisco.com/discussion/11010546/how-do-i-create-URL-bookmark-WebVPN-Portal-CLI

Kind regards
Dinesh Moudgil

PS Please rate helpful messages.

Disable the download Anyconnect client / turn off the url connection

Hello

Is there a way to disable the Anyconnect client download when you navigate to the anyconnect url? Or just make the connection of the url is not accessible
While users can still connect with their client anyconnect installed in the corporate network.

Thank you!

Dave.

You can't disable the download directly. This had been discussed several times here at least one CSC who also confirmed a case of TAC. Link.

A hack is that if your image Anyconnect is an older, users will never invited to be updated.

Re URL, you can turn off the alias that fill the drop-down list on the web portal, but also long as your have the SSL VPN service active, external interface of the ASA will be used toward the top of the login page to less than the default connection profile.

What is your reason for wanting to turn off in the first place? Perhaps there is another method to achieve what you want.

Change URL AnyConnect

All,

I need to change the URL that AnyConnect customer to connect with and I am looking for the best way to do it without forcing customers to manually change the URL on their existing facilities. This will also include passing a SSL self-signed certificate on the old address to a signed public SSL on the new address. I could use customer profiles for AnyConnect do even if I do not use profiles at all now? Means any person connecting with the old address are somehow automatically forwarded to the new address.

I think that you could use a profile and make your server list to see the FULL domain name and not the IP address.

Once customers were connected and their local profiles updated to include the COMPLETE domain name, check DNS pointing to the new address would send it to the place wished.

Here's where that is defined in the profile editor:

http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

AnyConnect VPN setup problem

Hi all, I'm going to have bad configure anyconnect VPN on my router. I'm CCENT pre level and especially followed a tutorial, but feel I'm missing something simple here.

It's a fairly simple installation on a Cisco No. 2851 - faces of a single interface my LAN 192.168.1.0/24, the other has a public IP address.

I created a network 192.168.2.0/24 VPN users, mainly to have phones Android connection of their mobile phone networks, and have access to the servers/security cameras/etc by using their local IP addresses. When my phone connects, it gets an IP address and is connected, but is not communicating with my LAN correctly.

The VPN client can ping 192.168.1.254 (the router's LAN IP) - but not the other devices on the network. However, the devices on my LAN can ping the VPN clients to their address 192.168.2.x.

Here's a copy of my current config, I have reorganized some elements with #s. Also pasted my ip sh road under him. Do not forget that I am a novice, please forgive the hack :)

Router (config) #do sh run
Building configuration...

Current configuration: 5782 bytes
!
! Last modification of the configuration at 02:24:24 UTC Sat Sep 5 2015 by #.
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
host name #.
!
boot-start-marker
boot-end-marker
!
!
enable secret $5 1$ 0 #.
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login local sslvpn
AAA authorization exec default local
!
!
!
!
!
AAA - the id of the joint session
!
!
dot11 syslog
no ip source route
!
!
IP cef
!
DHCP excluded-address 192.168.1.200 IP 192.168.1.254
DHCP excluded-address 192.168.1.1 IP 192.168.1.10
!
pool of dhcp IP LAN
network 192.168.1.0 255.255.255.0
Server DNS 192.168.1.254
by default-router 192.168.1.254
!
!
IP domain name # '.com'
host IP Switch 192.168.1.253
8.8.8.8 IP name-server
block connection-for 2000 tent 4 within 60
connection access silencer-class SSH_MGMT
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TRUSTPOINT-MY
enrollment selfsigned
Serial number
name of the object CN = 117-certificate
crl revocation checking
rsakeypair my-rsa-keys
!
!
MY-TRUSTPOINT crypto pki certificate chain
certificate self-signed 01
##########################

#########################
quit smoking
!
!
license udi pid CISCO2851 sn FTX1026A54Y
# 5 secret username $1$ yv # E9.
# 5 secret username $1$ X0nL ###kO.
!
redundancy
!
!
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
LAN description
IP 192.168.1.254 255.255.255.0
IP nat inside
No virtual-reassembly in ip
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
WAN description
No dhcp client ip asks tftp-server-address
No dhcp ip client application-domain name
DHCP IP address
IP access-group ACL-WAN_INTERFACE in
no ip redirection
no ip proxy-arp
NAT outside IP
No virtual-reassembly in ip
automatic duplex
automatic speed
No cdp enable
!
interface Serial0/0/0
no ip address
Shutdown
!
interface virtual-Template1
!
local IP 192.168.2.100 WEBVPN-POOL pool 192.168.2.110
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
The dns server IP
IP nat inside source list INSIDE_NAT_ADDRESSES interface GigabitEthernet0/1 overload
!
IP access-list standard INSIDE_NAT_ADDRESSES
permit 192.168.1.0 0.0.0.255
permit 192.168.2.0 0.0.0.255
IP access-list standard SSH_MGMT
permit 192.168.1.0 0.0.0.255
permit 207.210.0.0 0.0.255.255
!
IP extended ACL-WAN_INTERFACE access list
deny udp any any eq snmp
TCP refuse any any eq field
TCP refuse any any eq echo
TCP refuse any any day eq
TCP refuse any any eq chargen
TCP refuse any any eq telnet
TCP refuse any any eq finger
deny udp any any eq field
deny ip 127.0.0.0 0.255.255.255 everything
deny ip 192.168.0.0 0.0.255.255 everything
permit any any eq 443 tcp
allow an ip
!
exploitation forest esm config
NLS RESP-timeout 1
CPD cr id 1
!
!
!
!
!
!
!
control plan
!
!
!
!
profile MGCP default
!
!
!
!
!
access controller
Shutdown
!
!
!
Line con 0
exec-timeout 0 0
Synchronous recording
line to 0
exec-timeout 0 0
Synchronous recording
line vty 0 4
exec-timeout 0 0
Synchronous recording
entry ssh transport
line vty 5 15
exec-timeout 0 0
Synchronous recording
entry ssh transport
!
Scheduler allocate 20000 1000
!
Gateway Gateway-WebVPN-Cisco WebVPN
IP interface GigabitEthernet0/1 port 443
SSL rc4 - md5 encryption
SSL trustpoint TRUSTPOINT-MY
development
!
WebVPN install svc flash:/webvpn/anyconnect-linux-3.1.03103-k9.pkg sequence 1
!
WebVPN context Cisco WebVPN
title "Firewall.cx WebVPN - powered by Cisco"
SSL authentication check all
!
list of URLS "rewrite".
!
ACL "ssl - acl.
ip permit 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
Licensing ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
!
login message "Cisco Secure WebVPN"
!
webvpnpolicy political group
functions required svc
filter tunnel ssl - acl
SVC-pool of addresses 'WEBVPN-POOL' netmask 255.255.255.0
generate a new key SVC new-tunnel method
SVC split include 192.168.1.0 255.255.255.0
Group Policy - by default-webvpnpolicy
AAA authentication list sslvpn
Gateway Cisco WebVPN bridge
Max-users 5
development
!
end

Gateway of last resort is #. ###. ###. # network 0.0.0.0

S * 0.0.0.0/0 [254/0] via #. ###. ###.1
(###ISP))) is divided into subnets, subnets 1
S (# #ISP #) [254/0] via (# publicgateway #) GigabitEthernet0/1
###.###.0.0/16 is variably divided into subnets, 2 subnets, 2 masks
C ###.###.###.0/23 is directly connected, GigabitEthernet0/1
The ###.###.###.###/32 is directly connected, GigabitEthernet0/1
192.168.1.0/24 is variably divided into subnets, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, GigabitEthernet0/0
The 192.168.1.254/32 is directly connected, GigabitEthernet0/0
192.168.2.0/32 is divided into subnets, subnets 1
S 192.168.2.100 [0/0] via 0.0.0.0, Virtual Network1

can you try to disable the FW on your internal lan hosts and then try and ping from users of vpn client

Two remote AnyConnect clients cannot get two voice via softphones?

We have a situation where two remote users of SSL VPNS cannot establish a voice call via softphones or cookie lync. They can both talk but I can't hear the other. Each user can call external or the office LAN without problems.

I'm under ASA version 9.1 (5) and v.3.1.05170 AnyConnect. Pretty basic config (purified) - any help would be appreciated!

# sh run
: Saved
:
ASA Version 9.1 (5)
!
host device name
something.com domain name
activate the encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
encrypted passwd
names of
General pool of local pool IP 10.x.x.x - 10.x.x.y
IP local pool pool-ops-TI 10.y.y.y - 10.y.y.z

interface GigabitEthernet0/0
nameif outside
security-level 0
IP x.x.x.x where x.x.x.x
!
interface GigabitEthernet0/1
description of the inside interface
nameif inside
security-level 100
IP address y.y.y.y y.y.y.y
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/6
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/7
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
Shutdown
No nameif
no level of security
no ip address
!
banner login ***********************************************************************
connection of the banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
connection of the banner is a computer network that is private and can be used only in direct
banner connection explicit owner. The owner reserves the right to
banner connection monitor use this network to ensure the security of networks and respond
banner connect on specific allegations of misuse. Use of this network must
the banner sign a consent to the monitoring of these or other purposes.
connection banner in addition, the owner reserves the right to consent to a valid
application of law banner connection to search the network for evidence of a crime
banner stored within the network connection.
banner login ***********************************************************************
banner asdm ***********************************************************************
asdm banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
asdm banner is a computer network that is private and can be used only in direct
banner asdm explicit owner. The owner reserves the right to
banner asdm monitor use this network to ensure the security of networks and respond
asdm banner of specific allegations of misuse. Use of this network must
banner asdm you consent to the monitoring of these or other purposes.
asdm banner in addition, the owner reserves the right to consent to a valid
application of law banner asdm to search the network for evidence of a crime
asdm banner stored within the network.
banner asdm ***********************************************************************
boot system Disk0: / asa915-smp - k8.bin
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT 1 Sun Mar 1 Sun Nov 02:00 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 192.168.0.0
Server name 192.168.0.0
something.com domain name
Local_LAN_Access list standard access allowed host 0.0.0.0
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer 40960
logging buffered stored notifications
logging trap notifications
record of the mistakes of history
notifications of logging asdm
logging - the id of the device hostname
logging inside 10.0.0.0 host
logging inside 10.0.0.0 host
Outside 1500 MTU
Within 1500 MTU
IP verify reverse path to the outside interface
IP verify reverse path inside interface
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any echo outdoors
ICMP allow any inaccessible outside
ICMP allow any inside
ASDM image disk0: / asdm - 721.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Route inside 10.0.0.0 255.0.0.0 y.y.y.y 1
Route inside 192.168.0.0 255.255.0.0 y.y.y.y 1
Route inside 0.0.0.0 0.0.0.0 y.y.y.y in tunnel
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
test_VPN card-attribute LDAP
name of the memberOf Group Policy map
map-value memberOf "CN = test VPN, OR = groups of VPN, OR = Groups, OU = company, DC =, DC =, DC = com" "test VPN".
dynamic-access-policy-registration DfltAccessPolicy
AAA-server test-deviceauth protocol ldap
Max - a attempts failed 5
AAA-server baird-deviceauth (inside) host 192.x.x.x
Server-port 636
LDAP-base-dn DC = x, DC =, DC = z
LDAP-scope subtree
LDAP-login-password
LDAP-connection-dn cn = b, OU = Service accounts, DC = x, DC =, DC = z
enable LDAP over ssl
microsoft server type
AAA-server test-rsa Protocol sdi
AAA-server test-rsa (inside) host
interval before attempt-3 new
AAA-server auth-ldap-tes ldap Protocol
AAA-server test-ldap-auth (inside) host
Server-port 636
LDAP-base-dn DC = country, DC = a, DC = com
LDAP-scope subtree
LDAP-login-password
LDAP-connection-dn CN = b, OU = Service accounts, DC = x, DC =, DC = z
enable LDAP over ssl
microsoft server type
LDAP-attribute-map test_VPN
identity of the user by default-domain LOCAL
the ssh LOCAL of baird-deviceauth console AAA authentication
HTTP authentication AAA console LOCAL baird-deviceauth
serial baird-deviceauth LOCAL console AAA authentication
Enable http server
http inside x.x.x.x y.y.y.y
HTTP 1.1.1.1 255.255.255.0 inside
redirect http outside 80
SNMP-server host inside x.x.x.x trap community version 2 c
SNMP server location
contact SNMP Server
SNMP-server community
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Server enable SNMP traps entity power cpu-temperature
Crypto ipsec pmtu aging infinite - the security association
Crypto ca trustpoint trustpoint-selfsigned-vpncso
registration auto
FQDN
name of the object CN =, O =, C =, St =, =.
key pair
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
FQDN
name of the object CN = OR =, O =, C = St =, =.
key pair
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
trustpool crypto ca policy

Telnet timeout 5
SSH enable ibou
SSH stricthostkeycheck
x.x.x.x inside SSH
SSH timeout 30
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 15
No vpn-addr-assign aaa
No dhcp vpn-addr-assign
No ipv6-vpn-addr-assign aaa
no local ipv6-vpn-addr-assign
no statistical access list - a threat detection
no statistical threat detection tcp-interception
NTP server 1.1.1.1 source inside
NTP server 2.2.2.2 source inside
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
AnyConnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 2
AnyConnect profiles baird-client-profile disk0: / customer-baird - profile .xml
AnyConnect enable
attributes of Group Policy DfltGrpPolicy
value of banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
value of banner is a computer network that is private and can be used only in direct
banner value explicit owner. The owner reserves the right to
banner value monitor use this network to ensure the security of networks and respond
the value of the banner of the specific allegations of misuse. Use of this network must
value of the banner a consent to the monitoring of these or other purposes.
value of server DNS 1.1.1.1 2.2.2.2
VPN - connections 2
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy excludespecified
value of Split-tunnel-network-list Local_LAN_Access
something.com value by default-field
Split-dns value something.com, us.something.com
activate dns split-tunnel-all
the address value general-pool pools
WebVPN
use-smart-tunnel homepage
AnyConnect value dart modules, nam
AnyConnect value profiles baird-client-profile user type
AnyConnect ask flawless anyconnect
Group Policy 'test' internal
Group Policy attributes 'test '.
Split-tunnel-policy excludespecified
value of Split-tunnel-network-list Local_LAN_Access
activate dns split-tunnel-all
the address value it-ops-pool pools
internal testMacs group policy
attributes of the strategy of group testMacs
WINS server no
value of server DNS 1.1.1.1 2.2.2.2
client ssl-VPN-tunnel-Protocol
field default value xyz.com
username admin privilege 15 encrypted password
attributes global-tunnel-group DefaultRAGroup
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group DefaultRAGroup webvpn-attributes
the aaa authentication certificate
attributes global-tunnel-group DefaultWEBVPNGroup
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group DefaultWEBVPNGroup webvpn-attributes
the aaa authentication certificate
tunnel-group test remote access connection type
tunnel-group test-Connect General attributes
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group test connection webvpn-attributes
the aaa authentication certificate
allow group-url http://abc.xyz.com
allow group-url https://abc.xyz.rwbaird.com
type tunnel-group testMacs remote access
tunnel-group testMacs General-attributes
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
Group Policy - by default-testMacs
management of the password password-expire-to-days 10
use-set-name of the secondary-username-of-certificate
tunnel-group testMacs webvpn-attributes
allow group-url http://abc.xyz.com/macs
allow group-url https://abc.xyz.com/macs
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 26
Subscribe to alert-group configuration periodic monthly 26
daily periodic subscribe to alert-group telemetry
Cryptochecksum:aa675139dc84529791f9aaba46eb17f9
: end

I confess that I have not read your config in detail, but a few tips:

-If you do split tunnel, don't forget to push a route for the entire pool VPN subnet or subnets of VPN clients

-Make sure you have the same-security-traffic permitted intra-interface

http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa81/command/ref/refg...

-If you use NAT, you must exclude such NAT inter-VPN-device traffic

-If you have ACLs (not shown) do not forget to leave your pool VPN subnet is talking to himself. Generally, it would be in the ACL entering the external interface.

at the end of the packet - trace is your friend.

NGP

no client AnyConnect vpn internet access

AnyConnect vpn client no internet no access.

Here is the configuration. Help, please.

Thank you

Jessie

ASA Version 8.2 (1)

!

hostname ciscoasa5505

!

interface Vlan1

nameif inside

security-level 100

IP 172.16.0.1 255.255.0.0

!

interface Vlan2

nameif outside

security-level 0

IP address 69.x.x.54 255.255.255.248

!

interface Vlan5

Shutdown

prior to interface Vlan1

nameif dmz

security-level 50

DHCP IP address

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

DNS lookup field inside

DNS domain-lookup outside

DNS server-group DefaultDNS

Server name 172.16.0.2

Server name 69.x.x.6

object-group Protocol TCPUDP

object-protocol udp

object-tcp protocol

object-group service TS-777-tcp - udp

port-object eq 777

object-group service Graphon tcp - udp

port-object eq 491

object-group service TS-778-tcp - udp

port-object eq 778

object-group service moodle tcp - udp

port-object eq 5801

object-group service moodle-5801 tcp - udp

port-object eq 5801

object-group service 587 smtp tcp - udp

EQ port 587 object

outside_access_in list extended access permit tcp any host 69.x.x.50 eq imap4

outside_access_in list extended access permit tcp any host 69.x.x.52 eq ftp

outside_access_in list extended access allowed object-group TCPUDP any object-group of 69.x.x.50 host smtp-587

outside_access_in list extended access permit tcp any host 69.x.x.52 eq telnet

outside_access_in list extended access permit tcp any host 69.x.x.52 eq ssh

outside_access_in list extended access allowed object-group TCPUDP any host object-group moodle-5801 69.x.x.52

outside_access_in list extended access permit tcp any host 69.x.x.52 eq smtp

outside_access_in list extended access permit tcp any host 69.x.x.52 eq https

outside_access_in list extended access permit tcp any host 69.x.x.52 eq www

outside_access_in list extended access permit tcp any host 69.x.x.50 eq ftp

outside_access_in list extended access permit tcp any host 69.x.x.50 eq smtp

outside_access_in list extended access permit tcp any host 69.x.x.50 eq pop3

outside_access_in list extended access allowed object-group TCPUDP any host 69.x.x.50 EQ field

outside_access_in list extended access permit tcp any host 69.x.x.50 eq https

outside_access_in list extended access permit tcp any host 69.x.x.50 eq www

outside_access_in list extended access allowed object-group TCPUDP any host 69.x.x.51 EQ field

outside_access_in list extended access allowed object-group TCPUDP any host TS-778 69.x.x.51 object-group

outside_access_in list extended access allowed object-group TCPUDP any host Graphon 69.x.x.51 object-group

outside_access_in list extended access permit tcp any host 69.x.x.51 eq https

outside_access_in list extended access permit tcp any host 69.x.x.51 eq www

outside_access_in list extended access allowed object-group TCPUDP any host TS-777 69.x.x.50 object-group

outside_access_in list extended access permit tcp any host 69.x.x.54 eq https

access extensive list ip 172.16.0.0 outside_cryptomap_1 allow 255.255.0.0 192.168.50.0 255.255.255.0

access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.0.0 255.255.255.0

inside_nat0_outbound list of allowed ip extended access all 172.16.0.32 255.255.255.224

access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.50.0 255.255.255.0

access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.1.0 255.255.255.0

inside_access_in of access allowed any ip an extended list

Standard Split-Tunnel access list permit 172.16.0.0 255.255.0.0

access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.0.0 255.255.255.0

access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.50.0 255.255.255.0

access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.1.0 255.255.255.0

access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

access extensive list ip 172.16.0.0 outside_cryptomap allow 255.255.0.0 192.168.0.0 255.255.255.0

access extensive list ip 172.16.0.0 outside_cryptomap_2 allow 255.255.0.0 192.168.1.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

MTU 1500 dmz

IP local pool VPN_Users 172.16.100.10 - 172.16.100.20 mask 255.255.255.0

IP local pool anypool 172.16.0.9 - 172.16.0.19 mask 255.255.0.0

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0 access-list SHEEP

NAT (inside) 1 0.0.0.0 0.0.0.0

public static 69.x.x.50 (Interior, exterior) 172.16.0.2 netmask 255.255.255.255

public static 69.x.x.51 (Interior, exterior) 172.16.1.2 netmask 255.255.255.255

public static 69.x.x.52 (Interior, exterior) 172.16.1.3 netmask 255.255.255.255

inside_access_in access to the interface inside group

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 69.x.x.49 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

http 172.16.0.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

card crypto outside_map 1 match address outside_cryptomap

card crypto outside_map 1 set pfs

card crypto outside_map 1 set 208.x.x.162 counterpart

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

card crypto outside_map 2 match address outside_cryptomap_1

card crypto outside_map 2 set pfs

card crypto outside_map 2 peers set 209.x.x.178

card crypto outside_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

card crypto outside_map 3 match address outside_cryptomap_2

card crypto outside_map 3 set pfs

card crypto outside_map 3 peers set 208.x.x.165

card crypto outside_map 3 game of transformation-ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 5

preshared authentication

3des encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 30

preshared authentication

3des encryption

sha hash

Group 1

life 86400

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd outside auto_config

!

dhcpd address 172.16.0.20 - 172.16.0.40 inside

dhcpd dns 172.16.0.2 69.x.x.6 interface inside

dhcpd allow inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

allow outside

SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

enable SVC

tunnel-group-list activate

attributes of Group Policy DfltGrpPolicy

Server DNS 172.16.0.2 value

Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

Group Policy inside sales

Group sales-policy attributes

value of server DNS 172.16.1.2 172.16.0.2

VPN-tunnel-Protocol svc

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value split Tunnel

WebVPN

SVC mtu 1406

internal group anyconnect strategy

attributes of the strategy group anyconnect

VPN-tunnel-Protocol svc webvpn

WebVPN

list of URLS no

SVC request to enable default webvpn

username of graciela CdnZ0hm9o72q6Ddj encrypted password

graciela username attributes

VPN-group-policy DfltGrpPolicy

tunnel-group 208.x.x.165 type ipsec-l2l

208.x.x.165 group of tunnel ipsec-attributes

pre-shared-key *.

tunnel-group AnyConnect type remote access

tunnel-group AnyConnect General attributes

address anypool pool

strategy-group-by default anyconnect

tunnel-group AnyConnect webvpn-attributes

Group-alias anyconnect enable

allow group-url https://69.x.x.54/anyconnect

tunnel-group 208.x.x.162 type ipsec-l2l

208.x.x.162 tunnel ipsec-attributes group

pre-shared-key *.

tunnel-group 209.x.x.178 type ipsec-l2l

209.x.x.178 group of tunnel ipsec-attributes

pre-shared-key *.

!

Global class-card class

match default-inspection-traffic

!

!

World-Policy policy-map

Global category

inspect the icmp

!

service-policy-international policy global

context of prompt hostname

: end

Hello

You could start by adding the following configurations

permit same-security-traffic intra-interface

This will allow traffic to the VPN users access the interface ' outside ' of the SAA and to leave to the Internet using the same interface ' outside '. Without the above command, it is not possible.

Also, you need to add a NAT configuration for VPN Client users can use the Internet connection of the ASA

To do this, you can add this command

NAT (outside) 1 172.16.0.0 255.255.0.0

This will allow the PAT for the Pool of VPN dynamics.

Hope this helps

Don't forget to mark the reply as the answer if it answered your question.

Ask more if necessary

-Jouni

When I click on the + to open a new window I don't like the images that arise. I tried to change that in all: config; Browser.newtab.URL, but it will not

When I click on the + to open a new window I don't like the images that arise. I tried several times to change that through words: config; Browser.newtab.URL. I put in the site I want and it won't change. I tried to put in: blank and it don't work. I'm obviously something wrong - can you help please?

Thank you

If Firefox is ignorant preference browser.newtab.url, the usual culprit is an extension.

You can open the page in Firefox Add-ons using either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
- in the Windows "Run" dialog box, type or paste
  firefox.exe "about:addons"
In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions. Do not forget that all extensions are optional, none come with Firefox, and you can learn more about them by checking their reviews on the site of the Add - ons.

Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

Any improvement?

URL does not commit to the correct location.

A long URL used heading to another site. This happens if I use a bookmark or type in the information. If I use safari, the link works.

Suggestions?

You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

You can't recover from this "forget" unless you have a backup of the files involved.

It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

Cannot delete a site from the semi-automatic entered url which is no more in history.

-Very well, the first thing's first: there is a specific url that is no longer in my story, it's my fiance went to in order to watch his anime site. I cleared my history, downloads, caches, cookies, etc etc. The whole shebang, even made him "forget this site" for the url. I even deleted files out of my C:\ drive to try to remove this entry url AutoComplete highly undesirable. (I type in 'wat' und it pop for AutoComplete, when I still 5 favorite sites with "wat" in them which, for some reason, does not appear in place.) I started in safe mode, und all that other jazz.

No, I won't change my location for nothing toolbar settings. I like much tapped into two or three letters for a site of AutoComplete suggests pop-up. It is convenient for me, something und I use a million times a day. Well, then perhaps at least a hundred.

I tried the 'delete' around when it is highlighted, the ' shift + delete ', remove "places.sqlite" files from my computer, und almost all that I can shy to reset firefox... I just reset firefox because of the slowness in perhaps two weeks. I would like to seriously Firefox makes hell of a lot easier to go back to versions that do not eat my resources. This 34 version crap is annoyingly hungry.

However, back to the point I can't remove 'http://watchanimedubbed.tv/' from AutoComplete. After clearing all cookies, history, downloads, connections, etc... everything that appears on the list of fools when you want to clear your history when you browse und "Clear recent history" with "time range to clear" what the value... I don't know how to get rid of him. Und firefox rearmament is a last resort because.

I know very well that this is not some addons that I, well... maybe. Would be the only one, it could be the avast, but I do not see how it would affect und does not have this with any other site (or at least I thought). I've read several questions about Mozilla support but also other sites about people with similar problems, but most of them one of the fixes above worked for them. Still, a few of us remain perplexed as to why these semi-automatic entered URL is not unscrewing.

In addition, FF on Windows.

It was never just a bookmark, as... never. However, I have successfully solve the problem with your help. Don't not what whether to bookmarks, however.

You mentioned the FIrefox profile folder, I had to dig in roaming to join. I had searched my computer without going into homelessness for delete the places.sqlite, I deleted 3 of them. Was still have the question und looked only in C: / that is what a possible solution given that I deleted the files as suggested, no. where he mentioned to research in roaming under Firefox profile folder; only in C: /.

However, I found three other places.sqlite files in the profile folder. I deleted these und now I do not feel the question.

So, thanks for mentioning the case profiles.

I am no longer able to afford and don't forget fast. I have to manually, click the red icon in the upper left to access. How to restore the automatic prompt?

Yesterday, I visited a site to which I often, pingtest.net. Normally, when I visit this site, a thin horizontal bar appears at the top of the browser look at a framework. I don't remember what he said, but it spans the entire length of the frame, from left to right. On the right edge of the bar is a x, if I want to close. In addition, when this horizontal bar appears, I also have a box that is approximately six to seven times the height of the thin horizontal bar that appears on the left edge of the horizontal bar thin. This area extends across the width of about one-sixth or fifth of the width of the horizontal bar. It contains something like the following: show all, allow, authorize, and don't forget. I normally click on display all option, and I normally select Enable for all options now.

Here's what happened yesterday: I went to pingtest.net, the horizontal bar appeared and everything seemed normal. However, I have not taken any action. Instead, I changed my mind and decided to go to a different URL. My slider was in the middle of the screen. I moved the slider up until I was intending to be the URL field, in order to enter a new URL. Unfortunately, I did not move the slider enough. So, instead of clicking in the URL field, I clicked right in the middle of the horizontal bar. I HAVE NO IDEA OF WHAT I CLICKED, BUT FROM THAT MOMENT TO WHAT THE HORIZONTAL BAR HAS NEVER REAPPEARED. WHAT I CLICKED, IT SEEMS THAT I LOADED FIREFOX TO NEVER PROVIDE ME THIS HORIZONTAL BAR AGAIN!

As a result, I am also is more to get the box gray with the allow all display, allow and don't forget options.

How can I find a normal behavior and get the normal horizontal bar and the normal box with the options to show all, allow, authorize, and don't forget?

I do not know if you clear the "Site preferences" for the last time (s) would have effect if you would not do that immediately.

"Forget this Site" madly CPU Intensive, takes Forever/crashes browser - even for all the destruction of history

I'm more than 6 months of the browser history, and browse a lot on twitter. I want to "Forget About" Twitter. Whenever I try to do, Firefox everything crashes and becomes impossible to use. It's the same thing if I try to delete, say, just 6 months ago.

Deletion of the history of my browser should NOT be a process of jumping of browser. My rig is a Phenom IIx4 build, and I'm running out of an SSD. Maybe you guys have tied up all the browser history in some complicated cache for the URL bar, I don't know. But this is pathetic. If I remove 10GBs of crap from my HD for a few seconds, I should be able to delete the history of my browser.

"Firefox 29, with the GUI redesign. He had exactly the same problem. »

Looking at the list of bug fixes for 29.0.1, I don't see anything that could be related to your question. I don't remember what is a problem with previous versions as well.
Right now, I am betting that the problem is local to your profile.

Try to remove your history file.
1. Go to help > troubleshooting information, and then click Open containing folder. Which will open Windows Explorer in your Firefox profile.
2. Closing Firefox.
3. In your profile folder, delete the places.sqlite file (or rename). The next time you open Firefox, a new places.sqlite will be created automatically.
4. This file contains your history and bookmarks, so you'll need to restore your bookmarks. For instructions, visit https://support.mozilla.org/en-US/kb/restore-bookmarks-from-backup-or-move-them#w_restoring-from-backups

Why two of my favorites lost their url info and are are more clickable / delete?

I have hundreds of bookmarks, and two of them lost all their news all of a sudden. I click on one, he's not going anywhere. I right click on it, I get a menu has these listed: open, open in a new tab, open all in tabs, open all tabs (Yes it repeats), open in a new window, cut, copy, paste, new bookmark separator again, delete, forget this site, delete the bookmark. This menu is different from the menu for links to work.

In addition, when I'm going to fly over the glitch links, they do not have a url indicating. I click for their properties, there is absolutely no information on these links except their name. No URL or anything like that. I can't even delete or move them to another folder. What is the cause? Thank you for your time.

EDIT: just in case someone else has this problem, I fixed it, although I still don't know why it happened. I exported my favorites as a .json file. Just in case, I exported in HTML too. Then I applied the same json file to my favorites. This has deleted everything I had in my favorites and replaced by the bookmark that was simply deleted, a bit like a refreshment. However, all subfolders have disappeared. Fortunately, I got the html version of my favorites, that I then added to my favorites. I took the subfolders that have not been replaced by the json file and a place where they belonged and then deleted the duplicate folders. These ghosts are now found. Everything works fine.

You did very well.

Just a note, sometimes better to export using the html option.

I would really like to SEE my characters ('Lightweight themes"), and now you've done the fields URL and search unable to be moved. How can I fix it?

More seriously, this update does nothing but irritate me. I used to be able to shorten the length of the search box and URL by placing them on the same line and added a bunch of "empty space" at the end of their. This allowed me to actually see my character.

Now, with the update, I can't do that. I need to see all of the URL and the search box really didn't need to be almost across the width of my screen.

It would be nice if they were adjustable in the section options, and with all these iterations of Firefox, it's really very sad that you forget that people like to customize their browser. Otherwise, why have same Personas?

I solved the problem with an add-on:
https://addons.Mozilla.org/en-us/Firefox/addon/classicthemerestorer/?src=HP-DL-upandcoming

This puts some of the old options button in the Customize menu, such as 'empty space', which is useful for organizing and doing things to the left.

How can I prevent the redirect Firefox to my ISP site when I get my own website URL?

On the new computer with Windows 8 Firefox works fine for all URLs except when I walk into one of my own sites - "www.komokaweather.com" which is redirectsed on my ISP site 'http://www.rogers.com/web/Rogers.portal'. It's ok when I get home in the 'www.komokaweather.com/index' 'www.komokaweather.ca' as well as all other addresses, but not as just "www.komokaweather.com". I tried to make 'www.komokaweather.com' like Home Page but that does not work either.

I've also upgraded to v.19.0.2 but no change.
Paul

You can delete all stored data with a specific area through "Forget this Site" from the context menu of the history entry (see the history or the history sidebar) or via the subject: permissions page.

With the help of "Forget this Site" will delete everything as bookmarks, cookies, passwords, cache, history, and exceptions in this area, so be careful and if you have a password or other data from that domain that you do not want to lose so take note of these passwords and bookmarks.
You can't recover from which "forget" unless you have a backup of the affected files.

It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

You can have an ISP that automatically redirects you to a search page if a DNS search fails.

Who takes control of Firefox to search with the normal keyword like a Google, I'm lucky search.

In this case, you will need to contact your ISP and ask for a DNS to opt-out of this feature.

You can also check if there is a link on the search results page to go to your ISP and opt-out.

AnyConnect forget URL

Similar Questions

Maybe you are looking for