AnyConnect trouble Windows7

Similar Questions

• Trouble with AnyConnect

  Hello community! I have a few spots with AnyConnect wich I do, but have no idea how. Help, please. The tasks are:

  1. disable IPv6. We do not have running services IPv6 and IPv6 clients, create additional routine for us.

  2 prevent AnyConnect IPs of it is registering in DNS, because AnyConnect IP is not routable intranet.

  BONES of the customer - XP to 8, DNS server OS is Windows server 2008 R2 Datacenter. I am trying to disable IPv6 as http://www.techunboxed.com/2012/08/how-to-disable-ipv6-in-windows-8.htmlhere, but it seems that it has not worked for AnyConnect.

  Hello

  Do you use the ASA to assign IP addresses to users Anyconnect? If so they should not register for the DNS.

  Also, you can disable IPV6 address as described here:http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyc...

  HTH

  Averroès.

• I am having trouble printing my document in landscape format, even though I specified so

  I am having trouble printing my document in landscape format, even though I specified so

  * original title - print printer *.

  Hello IBTeh,

  We need a little more information.

  Please answer the following questions:

  What operating system do we use?

  Which printer we use?

  Is happening in one application or in more than one?

  We receive error messages when you try to print landscape?

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Web site of the manufacturer.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless

  Bluetooth

  Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.

  Can not find the necessary drivers

  Hello

  1 have you tried matching the laptop and the wireless audio link?

  2. What is the number of the model of the laptop?

  Method 1:

  Follow the link below and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)

  I also suggest you to contact the manufacturer to get the required drivers for the device and install it.

  http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html

  http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/VI-VN/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps!

• Cannot access ' inside' LAN of AnyConnect VPN

  Hello. I am having trouble with my VPN connection where I can connect to it very well, and access the internet, but I can't access the internal network. Anyone have any ideas on what I can check to solve that?

  I think that the suggestion concerning the exemption of NAT is very good. If that is not the issue, then I have some other suggestions.

  -with the session created VPN review information the AnyConnect and look in the route Details tab and be sure that these LAN addresses appear as secure routes.

  -check that the devices in the local network that you can not reach a route to addresses in the pool of the VPN.

  HTH

  Rick

• Cisco Anyconnect VPN client cannot establish a connection.

  Hello

  I am trying to connect to my server license from the University. I use 'Cisco Anyconnect VPN', but when it is goinh to initialize the connection it gives me the error "unable to establish a connection to the VPN client. At this point, the network of my Cisco anyconnect adapter gets disable automatically.

  I have no antivirus, and also it happens even when I turn off my firewall.

  Please help me solve this problem that prevents me from my all of the work!

  Thank you in advance.

  In addition to the advice of John I would also look at this document from Cisco for possible help...

  http://www.Cisco.com/image/gif/paws/100597/AnyConnect-VPN-Troubleshooting.PDF

  Cisco help as much as possible...

  http://www.Cisco.com/en/us/products/ps8411/tsd_products_support_series_home.html

  Its also possible you may have to run or reinstall the Cisco client in compatibility mode, if they do not have a version of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Otherwise contact your university network administrators may also be a viable option.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• I have trouble to install the printer HP laserjet P2055 on my Windows 7 HP pavilion

  I have trouble to install the printer HP laserjet P2055 on my windows 7 HP pavilion

  original title: installation problem

  Local printers

  To install a printer, the most common method is to connect directly to your computer. This is known as a local printer.

  If your printer is a universal serial (USB) bus model, Windows should automatically detect and install it when you plug it in.

  If it is an older model that connects using the serial or parallel, you may need to install manually.

  To install the printer (add) a local

  1. Click to open devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

     • If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional.

     • If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.)

  6. Perform the steps in the wizard and then click Finish.

     Tips

     • You can print a test page to make sure that the printer is working correctly. See print a test page.

     • If you have installed the printer, but it does not work, check the Web site of the manufacturer for troubleshooting driver or updated information.

  My printer does not print.

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  First of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions.

  Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  Then, try to update the printer driver on your computer. Sometimes printer problems come from out-of-date driver software, and can be solved by installing or reinstalling, the latest driver.

  To find the latest driver for your printer, first check Windows Update, which is designed to detect the hardware connected to your computer and automatically notify you when new drivers are available:

  1. Click to open Windows Update.

  2. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you do not see a listed updated printer driver, it is always possible that there are: your printer manufacturer might not have provided to Microsoft yet.

  Most printer manufacturers offer updated drivers on the sections of the support of their Web sites. Drivers are typically organized by edition and Windows printing model. When you have found the right driver, install it according to the instructions of the manufacturer. For more information, see update a hardware driver that is not working properly.

  If your printer still does not work, see the support section of the website of the manufacturer of your printer for model-specific troubleshooting tips.

• AnyConnect client... SSL vs. IPSec

  Hello

  I have a few questions on the Anyconnect VPN remote access.

  The anyconnect client works with SSL or IPSec ISAKMPv2? Y at - it no default or the default method?

  Where you would identify what method you choose? The anyconnect client automatically detects the type (SSL or IPSec)-based VPN server? How does the SSL over IPSec works in this case?  What is new ANyconnect 4.xclient?

  I would say that 90% or more customers use SSL.

  IPsec IKEv2 is used mainly by two categories of people:

  1. those who have need of next gen cryptographic algorithms for legal or regulatory reasons

  2. those who have had lovers, or CCIE candidates configure their VPN (joke - just a little bit)

  Is, when it is implemented correctly, did a good job to secure your traffic.

  The server (for example, the ASA) defines the method and the client that honors due to the associated connection profile that updates / downloads from the server.

  This initial process, even if you have IPsec IKEv2, normally happens over SSL as part of the preamble of IPsec session establishment. Manually, you can eliminate this small, but it is generally more trouble that it's worth.

• Having trouble getting phone Motorola Razomax HD & Windows 7 PC to communicate via USB and DLNA

  Having trouble getting telephone & Windows 7 pc to communicate via USB and DLNA

  Original title: motorola razomax hd

  Hi Bill,

  You can read these articles and check if that helps.

  How can I use DLNA on my DROID RAZR MAXX HD HD? : https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/91160/p/30, 6720,8579/session/L3RpbWUvMTM2NjAzNjU0My9zaWQvV1NvZ2hObmw%3D

  Install a USB device: http://windows.microsoft.com/en-in/windows7/install-a-usb-device

  Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-in/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player

  For more help.

  https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/30, 6720, 8579/p_country_code/US

  Additional information.

  Play: frequently asked questions: http://windows.microsoft.com/en-in/windows7/play-to-frequently-asked-questions

  Response with the State of the question and we will be happy to offer you our help.

• AnyConnect 2.5 on XP installation fails

  Anyone who has trouble with Anyconnect 2.5 install on Windows XP?  Once it breaks down, can I have the user click on the link of manual installation and works perfectly.  However, the automatic installation fails.  Users have administrator rights.  2.5 also installs on Vista and Windows 7 without any problem.  I get the following error on attempted installations of XP...

  

  In the case log, I get a large number of events similar to this...

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  Event type: error
  Event source: vpndownloader
  Event category: (1).
  Event ID: 2
  Date: 29/07/2010
  Time: 09:07:11
  User: n/a
  Computer: LVAK349
  Description:
  The description for the event (2) in Source (vpndownloader) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: function: CManifestMgr::ProcessManifests
  File:.\ManifestMgr.cpp
  Online: 658
  Called the function: GetManifest
  Return code: 0 (0x00000000)
  Description: Could not get the main manifest
  .

  Can you please verify what are you allowing ssl encryption as below.

  SSL cipher aes128-sha1-3des-sha1

  Concerning

  BR

• ASA checks AnyConnect VPN computer name

  Hi all

  I have searched the Forum and documentation, but have not found a solution to my problem.  I'm guessing it happens sometimes, but maybe I'm looking for the wrong thing.  We AnyConnect deployed across our cell phones, but have trouble with employees who do get the software from other sources AnyConnect and install on personal computers.  We are an agency, although relatively small, but we have policies in place and I need to lock for users unable to connect to the VPN unless you're a book PC connected to our AD domain.  I found a possible solution is to use dynamic access within the ASA policies to check the Windows computer name.  So I set up LDAP and has created a policy to check an AAA attribute.  It lets me select "MemberOf", which I assume it is the Group of users, but I need to check the name of the computer on the client before allowing access.

  Step by step of what I did, does anyone know of a more logical or easier way to lock on what AnyConnect VPN client computers can be used?

  Or if I go about this common sense with dynamic access policies, anyone have any suggestions or knowledge of documentation that helps to configure things properly when you check the computer name LDAP attribute?

  Thank you!

  JD

  Hey Joe,

  You do not need LDAP to do this, what you need is CSD (Cisco Secure Desktop) combined with DAP.

  Once you enable SSC, edit your DAP strategy and instead of an IPN to attribute you to try, add an attribute of endpoint (on the right hand side).

  To verify the host name, select the type of the attribute "peripheral".

  Alternatively, you can also activate the sweep of host (under Contract) and let the CSD to check the presence of a file with a certain file name, or a registry entry or a process name. CSD passes the result of this verification to the PAD, so you can use it in a policy (attributes of endpoint of type process, registry and files).

  Another alternative is to use the CSD with a policy before opening session - that you cannot check the host name, but it does not have control over the IP, OS type, certificate as well as the presence of a process, the registry key, the file. In this case you need not to DAP.

  HTH

  Herbert

• ASA Windows7 and startup-before-logon problems (SBL)

  We try in vain to get Windows7 SBL working with configuration following (SBL works for XP);

  ASA5520

  ASA 8.0 (4)

  ASDM 6.1 (5)

  AnyConnect 2.4.1012

  VPN Plus license (SSL VPN peers 100)

  When you configure the group policy for Clent download optional Module we have option for vpngina and can not see module start before logon (EPP), in paragraph 2.4 of the AnyConnect Client documentation.

  Is this a problem of license type or do we need an ASA/ASDM software update?

  Thanks in advance for your help.

  The following doc can be referenced on the rest of the SBL configuration:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00809f0d75.shtml

• AnyConnect invalid certificate

  Hello

  I'm having some trouble with my AnyConnect Setup.

  I have configured AnyConnect (vpn ssl / webvpn) on my Cisco 1841 router and I can access it from a web browser, and start the tunnel, then anyconnect starts and then the problem happened, because when AnyConnect tries to connect it comes up with an error saying "is not valid the certificate on the secure gateway'.»»

  I read almost all of the threads here on the problem also tried to make a new certificate, but nothing works

  BTW: I use a self-signed certificate

  I have attached the running configuration, if it helps.

  Hope that there is someone who can help you.

  / Benjamin

  It does not matter. Customer must just trust to a vpn gateway certificate.

• ACS - AnyConnect 3.0.5080 Network Access Manager (NAM) by selecting the right certificate

  Hello

  We are authenticate our users of portable Windows7 wireless using Microsoft CA issued certificates from computer to Server v4.2 ACS Cisco successfully using EAP - TLS

  However AnyConnect 3.0.5080 is installed and Network Access Manager (NAM) runs on laptops that Nam appears to be selecting details in the bad certificate for EAP - TLS authentication to the ACS server, it selects username details in a personal certificate on the computer of users that is used by LYNC 2010 and does not use the installed machine certificate.

  Newspapers of ACS that indicate this is attached.

  NAM will always use the details obtained from a personal certificate of feedback a computer certificate (if they both have the same domain name that they contain).

  Nothing specific that I should be looking.

  Thanks in advance for any help.

  No problem Jim

  If you could please update this thread as you progress, this will help a lot of customers in the future!

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Access Web site external AnyConnect

  Guys, I'm trying to allow AnyConnect VPN client to access external Web sites through the ASA (no split tunneling). In other words, I want users connected via VPN to gain access to the internal network, but also to be able to access external Web sites by having that first tunnel traffic to the ASA and then to the internet. I tried the suggestions mentioned in this thread, but not luck. Specifically, I tried adding this statement of nat:

  NAT (outside) 1 192.168.30.0 255.255.255.0

  as well as this one:

  NAT (outside) 1 192.168.30.0 255.255.255.0 outside

  By I had no statement "nat (outside). Unable to access outside sites in these three cases. I have no trouble to access within the network when connected. I issued the sysopt connection VPN-enabled control to ignore the interface of access for vpn users lists. Config is attached (washed). Any help would be greatly appreciated.

  Change this line: nat (outside) 1 192.168.30.0 255.255.255.0 outside

  To: nat (outside) 1 192.168.30.0 255.255.255.0

  Global 1 interface (outside) will associate the NAT to the external interface.

  Also make sure you have the traffic that is allowed between the hosts connected to the same interface with this command:

  permit same-security-traffic intra-interface