Cannot access ' inside' LAN of AnyConnect VPN

Hello. I am having trouble with my VPN connection where I can connect to it very well, and access the internet, but I can't access the internal network. Anyone have any ideas on what I can check to solve that?

I think that the suggestion concerning the exemption of NAT is very good. If that is not the issue, then I have some other suggestions.

-with the session created VPN review information the AnyConnect and look in the route Details tab and be sure that these LAN addresses appear as secure routes.

-check that the devices in the local network that you can not reach a route to addresses in the pool of the VPN.

HTH

Rick

Tags: Cisco Security

Similar Questions

PIX501 customer VPN - cannot access inside the network with VPN Session

What follows is based on the config on the attached link:

http://www.Cisco.com/en/us/Partner/Tech/tk583/TK372/technologies_configuration_example09186a008009442e.shtml

PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC

We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.

Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!

We have the same problem with the customer 4.0.3(c)

Thanks in advance for any help!

=======================================

AKCPIX00 # sh run

: Saved

:

6.2 (3) version PIX

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

hostname AKCPIX00

domain.com domain name

fixup protocol ftp 21

fixup protocol http 80

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol they 389

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol sip 5060

fixup protocol 2000 skinny

fixup protocol sip udp 5060

names of

access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

pager lines 24

interface ethernet0 10baset

interface ethernet1 10full

Outside 1500 MTU

Within 1500 MTU

external IP address #. #. #. # 255.255.240.0

IP address inside 192.168.1.5 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

IP local pool akcpool 10.0.0.1 - 10.0.0.10

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

(Inside) NAT 0-list of access 101

NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

RADIUS Protocol RADIUS AAA server

AAA-server local LOCAL Protocol

the ssh LOCAL console AAA authentication

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Permitted connection ipsec sysopt

No sysopt route dnat

Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

Crypto-map dynamic dynmap 10 transform-set RIGHT

map mymap 10-isakmp ipsec crypto dynamic dynmap

mymap outside crypto map interface

ISAKMP allows outside

part of pre authentication ISAKMP policy 10

encryption of ISAKMP policy 10

ISAKMP policy 10 md5 hash

10 2 ISAKMP policy group

ISAKMP life duration strategy 10 86400

vpngroup address akcpool pool akcgroup

vpngroup dns 192.168.1.10 Server akcgroup

vpngroup akcgroup by default-domain domain.com

vpngroup split tunnel 101 akcgroup

vpngroup idle 1800 akcgroup-time

vpngroup password akcgroup *.

vpngroup idle 1800 akc-time

Telnet timeout 5

SSH #. #. #. # 255.255.255.255 outside

SSH timeout 15

dhcpd address 192.168.1.100 - 192.168.1.130 inside

dhcpd dns 192.168.1.10

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd allow inside

Terminal width 80

Cryptochecksum:XXXXX

: end

AKCPIX00 #.

Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:

mymap outside crypto map interface

ISAKMP allows outside

Enter these two commands should be enough to reset the ipsec and isakmp.

CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION

Hello

I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match? Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.

Please see my full configuration:

Router #sh run
Building configuration...

Current configuration: 8150 bytes
!
! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
Passwords security min-length 6
no set record in buffered memory
enable secret 5 xxxxxxxxxxx
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
!
No ipv6 cef
IP source-route
no ip free-arps
IP cef
!
Xxxxxxxxx name server IP
IP server name yyyyyyyyy
!
Authenticated MultiLink bundle-name Panel
!

parameter-map local urlfpolicy TSQ-URL-FILTER type
offshore alert
block-page message "Blocked according to policy"
parameter-card type urlf-glob FACEBOOK
model facebook.com
model *. Facebook.com

parameter-card type urlf-glob YOUTUBE
mires of youtube.com
model *. YouTube.com

parameter-card type urlf-glob CRICKET
model espncricinfo.com
model *. espncricinfo.com

parameter-card type urlf-glob CRICKET1
webcric.com model
model *. webcric.com

parameter-card type urlf-glob YAHOO
model *. Yahoo.com
model yapo

parameter-card type urlf-glob PERMITTEDSITES
model *.

parameter-card type urlf-glob HOTMAIL
model hotmail.com
model *. Hotmail.com

Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-2049533683
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2049533683
revocation checking no
rsakeypair TP-self-signed-2049533683
!
Crypto pki trustpoint tti
crl revocation checking
!
Crypto pki trustpoint test_trustpoint_config_created_for_sdm
name of the object [email protected] / * /
crl revocation checking
!
!
TP-self-signed-4966226213 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332

quit smoking
encryption pki certificate chain tti
for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
license udi pid CISCO1905/K9 sn xxxxxx
licence start-up module c1900 technology-package datak9
username privilege 15 password 0 xxxxx xxxxxxx
!
redundancy
!
!
!
!
!
type of class-card inspect entire tsq-inspection-traffic game
dns protocol game
ftp protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
match Protocol l2tp
class-card type match - all BLOCKEDSITES urlfilter
Server-domain urlf-glob FACEBOOK game
Server-domain urlf-glob YOUTUBE game
CRICKET urlf-glob-domain of the server match
game server-domain urlf-glob CRICKET1
game server-domain urlf-glob HOTMAIL
class-map type urlfilter match - all PERMITTEDSITES
Server-domain urlf-glob PERMITTEDSITES match
inspect the class-map match tsq-insp-traffic type
corresponds to the class-map tsq-inspection-traffic
type of class-card inspect correspondence tsq-http
http protocol game
type of class-card inspect all match tsq-icmp
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence tsq-invalid-src
game group-access 100
type of class-card inspect correspondence tsq-icmp-access
corresponds to the class-map tsq-icmp
!
!
type of policy-card inspect urlfilter TSQBLOCKEDSITES
class type urlfilter BLOCKEDSITES
Journal
reset
class type urlfilter PERMITTEDSITES
allow
Journal
type of policy-card inspect SELF - AUX-OUT-policy
class type inspect tsq-icmp-access
inspect
class class by default
Pass
policy-card type check IN and OUT - POLICIES
class type inspect tsq-invalid-src
Drop newspaper
class type inspect tsq-http
inspect
service-policy urlfilter TSQBLOCKEDSITES
class type inspect tsq-insp-traffic
inspect
class class by default
drop
policy-card type check OUT IN-POLICY
class class by default
drop
!
area inside security
security of the OUTSIDE area
source of security OUT-OF-IN zone-pair outside the destination inside
type of service-strategy check OUT IN-POLICY
zone-pair IN-to-OUT DOMESTIC destination outside source security
type of service-strategy inspect IN and OUT - POLICIES
security of the FREE-to-OUT source destination free outdoors pair box
type of service-strategy inspect SELF - AUX-OUT-policy
!
Crypto ctcp port 10000
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 2
Group 2
!
ISAKMP crypto client configuration group vpntunnel
XXXXXXX key
pool SDM_POOL_1
include-local-lan
10 Max-users
ISAKMP crypto ciscocp-ike-profile-1 profile
vpntunnel group identity match
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-TRANSFORMATION TSQ
set of isakmp - profile ciscocp-ike-profile-1
!
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
!
interface GigabitEthernet0/0
Description LAN INTERFACE-FW-INSIDE
IP 172.17.0.71 255.255.0.0
IP nat inside
IP virtual-reassembly in
security of the inside members area
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
Description WAN-INTERNET-INTERNET-FW-OUTSIDE
IP address xxxxxx yyyyyyy
NAT outside IP
IP virtual-reassembly in
security of the OUTSIDE member area
automatic duplex
automatic speed
!
interface Serial0/0/0
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
no fair queue
2000000 clock frequency
!
type of interface virtual-Template1 tunnel
IP unnumbered GigabitEthernet0/0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP nat inside source list 1 interface GigabitEthernet0/1 overload
IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
IP route 192.168.1.0 255.255.255.0 172.17.0.6
IP route 192.168.4.0 255.255.255.0 172.17.0.6
!
access-list 1 permit 172.17.0.0 0.0.255.255
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip yyyyyy yyyyyy everything
!
!
!
!
!
!
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
transport input ssh rlogin
!
Scheduler allocate 20000 1000
end

A few things to change:

(1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.

(2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:

access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255

access-list 120 allow ip 172.17.0.0 0.0.255.255 everything

overload of IP nat inside source list 120 interface GigabitEthernet0/1

No inside source list 1 interface GigabitEthernet0/1 ip nat overload

(3) OUT POLICY need to include VPN traffic:

access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255

type of class-card inspect correspondence vpn-access

game group-access 121

policy-card type check OUT IN-POLICY

vpn-access class

inspect

ASA 5505 VPN established, cannot access inside the network

Hi, I recently got an ASA 5505, and I spent weeks to find a way to set up a VPN on it.

After a few days, I finally found the solution to connect to my ASA with a VPN client yet and cannot access devices that are connected to the ASA.

Here is my config:

ASA Version 8.2 (5)
!
hostname asa01
domain kevinasa01.net
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 5
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan5
No nameif
security-level 50
IP 172.16.1.1 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain kevinasa01.net
permit same-security-traffic intra-interface
Remote_Kevin_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.254.0 255.255.255.240
inside_nat0_outbound list of allowed ip extended access all 192.168.254.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access entire 192.168.1.0 255.255.255.0
sheep - in extended Access-list allow IP 192.168.254.0 255.255.255.0 192.168.1.0 255.255.255.0
access extensive list ip 192.168.254.0 outside_access_in allow 255.255.255.0 any
access extensive list ip 192.168.254.0 inside_access_in allow 255.255.255.0 any
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
pool pool 192.168.254.1 - 192.168.254.10 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (outside) 1 192.168.254.0 255.255.255.0
NAT (inside) 0 access-list sheep - in
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd allow inside
!

a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal Remote_Kevin group strategy
attributes of Group Policy Remote_Kevin
value of server DNS 192.168.1.12 192.168.1.13
VPN - connections 3
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Remote_Kevin_splitTunnelAcl
kevinasa01.NET value by default-field
username kevin mz6JxJib/sQqvsw9 password encrypted privilege 0
username kevin attributes
VPN-group-policy Remote_Kevin
type tunnel-group Remote_Kevin remote access
attributes global-tunnel-group Remote_Kevin
address-pool
Group Policy - by default-Remote_Kevin
IPSec-attributes tunnel-group Remote_Kevin
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:2bb1da52d1993eb9b13c2f6dc97c16cd
: end

Thank you

Hello

I read your message quickly through my cell phone. I don't know why you have spent your config twice. Maybe a typo issue.

I see the acl sheep in the wrong way. I mean 192.168.254 are your pool VPN and 192.168.1.0 your local LAN.

The acl must be:

sheep - in extended access-list permit ip 192.168.1.0 255.255.255.0 192.168.254.0 255.255.255.0

For nat (inside), you have 2 lines:

NAT (inside) 1 192.168.1.0 255.255.255.0 ==> it is redundant as the 1 below does the same thing with more networks if there is inside side. You can delete it.
NAT (inside) 1 0.0.0.0 0.0.0.0

Why are you doing this nat (outside)?

NAT (outside) 1 192.168.254.0 255.255.255.0

Here are the first questions that I have seen by reading through my mobile. Let's change this and let me know. I'll take a look later with a computer (tonight or tomorrow)

Thank you.

PS: Please do not forget to rate and score as good response if this solves your problem.

Cannot access within LAN of Cisco Anyconnect

I'm new to the firewall and try to get my Anyconnect test configuration to connect to addresses within my Local network. The Anyconnect client connects easily, I can get to addresses Internet and tracer package told me it falls to phase 6, svc-webvpn. Can someone post my config? I don't know I'm missing something pretty obvious. Config is pasted below:

!

interface Ethernet0/0

Description< uplink="" to="" isp="">

switchport access vlan 20

!

interface Ethernet0/1

Description< inside="">

switchport access vlan 10

Speed 100

full duplex

!

interface Ethernet0/2

Description< home="" switch="">

switchport access vlan 10

!

interface Ethernet0/3

switchport access vlan 10

!

interface Ethernet0/4

!

interface Ethernet0/5

Shutdown

!

interface Ethernet0/6

Shutdown

!

interface Ethernet0/7

Shutdown

!

interface Vlan10

nameif inside

security-level 100

IP 192.168.1.99 address 255.255.255.0

!

interface Vlan20

nameif OUTSIDE

security-level 0

DHCP client dns update

IP address dhcp setroute

!

Vlan30 interface

No nameif

no level of security

no ip address

!

Banner motd

Banner motd +... +

Banner motd |

Banner motd | Any unauthorized use or access prohibited * |

Banner motd |

Banner motd | The Officer allowed the exclusive use.

Banner motd | You must have explicit permission to access or |

Banner motd | configure this device. All activities performed.

Banner motd | on this unit can be saved and violations of.

Banner motd | This strategy may result in disciplinary action, and |

Banner motd | may be reported to the police authorities. |

Banner motd |

Banner motd | There is no right to privacy on this device. |

Banner motd |

Banner motd +... +

Banner motd

boot system Disk0: / asa824-k8

passive FTP mode

clock timezone cst - 6

clock to summer time recurring cdt

permit same-security-traffic intra-interface

ICMP-type of object-group DEFAULT_ICMP

Description< default="" icmp="" types="" permit="">

response to echo ICMP-object

ICMP-unreachable object

ICMP-object has exceeded the time

object-group network obj and AnyConnect

host of the object-Network 192.168.7.20

host of the object-Network 192.168.7.21

host of the object-Network 192.168.7.22

host of the object-Network 192.168.7.23

host of the object-Network 192.168.7.24

host of the object-Network 192.168.7.25

access-list 101 extended allow icmp a whole

!

Note access-list ACL_OUTSIDE < anyconnect="" permit=""> >

ACL_OUTSIDE list extended access permitted tcp everything any https eq

ACL_OUTSIDE list extended access permit icmp any any DEFAULT_ICMP object-group

!

VPN_NAT list extended access permit ip host 192.168.7.20 all

VPN_NAT list extended access permit ip host 192.168.7.21 all

VPN_NAT list extended access permit ip host 192.168.7.22 all

VPN_NAT list extended access permit ip host 192.168.7.23 all

VPN_NAT list extended access permit ip host 192.168.7.24 all

VPN_NAT list extended access permit ip host 192.168.7.25 all

access-list extended sheep allowed ip group object obj-AnyConnect 192.168.1.0 255.255.255.0

pager lines 24

Enable logging

timestamp of the record

logging buffered information

logging trap information

exploitation forest asdm errors

MTU 1500 inside

Outside 1500 MTU

mask 192.168.7.20 - 192.168.7.25 255.255.255.0 IP local pool AnyconnectPool

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 645.bin

don't allow no asdm history

ARP timeout 14400

Global (1 interface OUTSIDE)

NAT (INSIDE) 1 192.168.1.0 255.255.255.0

NAT (OUTSIDE) 1 access-list VPN_NAT

Access-group ACL_OUTSIDE in interface OUTSIDE

!

router RIP

network 192.168.1.0

passive-interface OUTSIDE

version 2

!

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

AAA authentication http LOCAL console

Enable http server

http 192.168.1.0 255.255.255.0 inside

http 192.168.2.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Sysopt connection tcpmss 1200

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4688000 association

Crypto-map dynamic dynmap 20 the value transform-set ESP-3DES-SHA

map outside_map 64553-isakmp ipsec crypto dynamic dynmap

outside_map interface card crypto OUTSIDE

!

ISAKMP crypto identity hostname

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

VPN-addr-assign local reuse-delay 120

SSH 192.168.1.0 255.255.255.0 inside

SSH 192.168.2.0 255.255.255.0 inside

SSH timeout 60

Console timeout 0

management-access INTERIOR

DHCP-client broadcast-flag

dhcpd x.x.x.x dns

dhcpd rental 43200

dhcpd ping_timeout 2000

dhcpd auto_config OUTSIDE

!

dhcpd address 192.168.1.150 - 192.168.1.180 inside

dhcpd allow inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

NTP 216.229.0.179 Server

SSL encryption, 3des-sha1-aes128-sha1 aes256-sha1 sha1 rc4

localtrust point of trust SSL outdoors

WebVPN

allow outside

AnyConnect essentials

SVC disk0:/anyconnect-win-4.2.01035-k9.pkg 1 image

SVC disk0:/anyconnect-linux-64-4.2.01035-k9.pkg 2 image

Picture disk0:/anyconnect-macosx-i386-4.2.01035-k9.pkg 3 SVC

enable SVC

tunnel-group-list activate

attributes of Group Policy DfltGrpPolicy

Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

internal Anyconnect group strategy

attributes Anyconnect-group policy

value x.x.x.x DNS server

VPN-tunnel-Protocol svc

the address value AnyconnectPool pools

type tunnel-group remotevpn remote access

tunnel-group Anyconnect type remote access

tunnel-group Anyconnect General attributes

strategy-group-by default Anyconnect

tunnel-group Anyconnect webvpn-attributes

enable MY_RA group-alias

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

context of prompt hostname

Auto-update 30 3 1 survey period

Update automatic timeout 1

call-home

Profile of CiscoTAC-1

no active account

http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

email address of destination [email protected] / * /

destination-mode http transport

Subscribe to alert-group diagnosis

Subscribe to alert-group environment

Subscribe to alert-group monthly periodic inventory

monthly periodicals to subscribe to alert-group configuration

daily periodic subscribe to alert-group telemetry

Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e

: end

Hello

You are missing a NAT FREE for Anyconnect traffic would allow you to access inside the network.

access-list allowed sheep ip 192.168.1.0 255.255.255.0 192.168.7.0 255.255.255.0

NAT (inside) 0 access-list sheep

Add these two lines in the config file and you should be able to access the network interior.

Kind regards

Aditya

Please evaluate the useful messages and mark the correct answers.

Cannot access internal network so AnyConnect SSL VPN, ASA 9.1 (6)

Hello Cisco community support,

I have a lab which consists of two virtual environments connected to a 3750-G switch that is connected to a 2901 router which is connected to an ASA 5512 - X which is connected to my ISP gateway. I configured SSL VPN using AnyConnect and can establish a VPN to the ASA from the outside but once connected, I can't access internal network resources or access the internet. My information network and ASA configuration is listed below. Thank you for any assistance you can offer.

ISP network gateway: 10.1.10.0/24

ASA to the router network: 10.1.40.0/30

Pool DHCP VPN: 10.1.30.0/24

Network of the range: 10.1.20.0/24

Development network: 10.1.10.0/24

: Saved
:
: Serial number: FCH18477CPT
: Material: ASA5512, 4096 MB RAM, CPU Clarkdale 2793 MHz, 1 CPU (2 cores)
:
ASA 6,0000 Version 1
!
hostname ctcndasa01
activate bcn1WtX5vuf3YzS3 encrypted password
names of
cnd-vpn-dhcp-pool 10.1.30.1 mask - 255.255.255.0 IP local pool 10.1.30.200
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 10.1.40.1 255.255.255.252
!
interface GigabitEthernet0/1
nameif outside
security-level 0
address IP X.X.X.237 255.255.255.248
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa916-1-smp - k8.bin
boot system Disk0: / asa912-smp - k8.bin
passive FTP mode
permit same-security-traffic intra-interface
network of the NETWORK_OBJ_10.1.30.0_24 object
10.1.30.0 subnet 255.255.255.0
network obj_any object
network obj_10.1.40.0 object
10.1.40.0 subnet 255.255.255.0
network obj_10.1.30.0 object
10.1.30.0 subnet 255.255.255.0
outside_access_in list extended access permitted ip object NETWORK_OBJ_10.1.30.0_24 all
FREE access-list extended ip 10.1.40.0 NAT allow 255.255.255.0 10.1.30.0 255.255.255.0
access-list 101 extended allow any4 any4-answer icmp echo
access-list standard split allow 10.1.40.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 743.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) source obj_10.1.40.0 destination obj_10.1.40.0 static static obj_10.1.30.0 obj_10.1.30.0 non-proxy-arp-search to itinerary
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.1.30.0_24 NETWORK_OBJ_10.1.30.0_24 non-proxy-arp-search to itinerary
Access-group outside_access_in in interface outside
!
Router eigrp 1
Network 10.1.10.0 255.255.255.0
Network 10.1.20.0 255.255.255.0
Network 10.1.30.0 255.255.255.0
Network 10.1.40.0 255.255.255.252
!
Route outside 0.0.0.0 0.0.0.0 10.1.10.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
without activating the user identity
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 inside
http X.X.X.238 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec pmtu aging infinite - the security association
Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
registration auto
full domain name no
name of the object CN = 10.1.30.254, CN = ctcndasa01
ASDM_LAUNCHER key pair
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
certificate c902a155
308201cd 30820136 a0030201 020204c 0d06092a 864886f7 0d 010105 9 02a 15530
0500302b 31133011 06035504 03130 has 63 61736130 31311430 12060355 74636e64
0403130 31302e31 2e33302e 32353430 1e170d31 35303731 32303530 3133315a b
170d 3235 30373039 30353031 33315 has 30 2 b 311330 0403130a 11060355 6374636e
64617361 30313114 30120603 55040313 0b31302e 312e3330 2e323534 30819f30
0d06092a 864886f7 010101 05000381 8 d 0d 003081 89028181 00a47cfc 6b5f8b9e
9b106ad6 857ec34c 01028f71 d35fb7b5 6a61ea33 569fefca 3791657f eeee91f2
705ab2ea 09207c4f dfbbc18a 749b19ae d3ca8aa7 3370510b a5a96fd4 f9e06332
4355 db1a4b88 475f96a1 318f7031 40668a4d afa44384 819d fa164c05 2e586ccc
3ea59b78 5976f685 2abbdcf6 f3b448e5 30aa96a8 1ed4e178 0001300 020301 4 d d
06092a 86 01010505 00038181 0093656f 639e138e 90b69e66 b50190fc 4886f70d
42d9b4a8 11828da4 e0765d9c 52d84f8b 8e70747e e760de88 c43dc5eb 1808bd0f
fd2230c1 53f68ea1 00f3e956 97eb313e 26cc49d7 25b927b5 43d8d3fa f212fcaf
59eb8104 98e3a1d9 e05d3bcb 428cd7c6 61b530f5 fe193d15 ef8c7f08 37ad16f5
d8966b50 917a88bb f4f30d82 6f8b58ba 61
quit smoking
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
VPN-addr-assign local reuse / 360 time
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Trust ASDM_Launcher_Access_TrustPoint_0 vpnlb-ip SSL-point
SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-linux-3.1.09013-k9.pkg 4
AnyConnect image disk0:/anyconnect-macosx-i386-3.1.09013-k9.pkg 5
AnyConnect image disk0:/anyconnect-win-3.1.09013-k9.pkg 6
AnyConnect enable
tunnel-group-list activate
internal GroupPolicy_cnd-vpn group policy
GroupPolicy_cnd-vpn group policy attributes
WINS server no
value of server DNS 8.8.8.8
client ssl-VPN-tunnel-Protocol
by default no
xxxx GCOh1bma8K1tKZHa username encrypted password
type tunnel-group cnd - vpn remote access
tunnel-group global cnd-vpn-attributes
address-cnd-vpn-dhcp-pool
strategy-group-by default GroupPolicy_cnd-vpn
tunnel-group cnd - vpn webvpn-attributes
activation of the alias group cnd - vpn
!
ICMP-class class-map
match default-inspection-traffic
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map icmp_policy
icmp category
inspect the icmp
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
service-policy icmp_policy outside interface
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:261228832f3b57983bcc2b4ed5a8a9d0
: end
ASDM image disk0: / asdm - 743.bin
don't allow no asdm history

Can you confirm that this is correct, your diagram shows your IP address public on ASA as 30 while you have assinged on 'outside' interface like 29?

Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

Thank you

interface Ethernet0/0

Speed 100

full duplex

nameif outside

security-level 0

IP x.x.x.x 255.255.255.240

!

interface Ethernet0/1

Speed 100

full duplex

nameif inside

security-level 100

IP 10.88.10.254 255.255.255.0

!

interface Management0/0

Shutdown

nameif management

security-level 0

no ip address

!

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

network of the PAT_to_Outside_ClassA object

10.88.0.0 subnet 255.255.0.0

network of the PAT_to_Outside_ClassB object

subnet 172.16.0.0 255.240.0.0

network of the PAT_to_Outside_ClassC object

Subnet 192.168.0.0 255.255.240.0

network of the LocalNetwork object

10.88.0.0 subnet 255.255.0.0

network of the RemoteNetwork1 object

Subnet 192.168.0.0 255.255.0.0

network of the RemoteNetwork2 object

172.16.10.0 subnet 255.255.255.0

network of the RemoteNetwork3 object

10.86.0.0 subnet 255.255.0.0

network of the RemoteNetwork4 object

10.250.1.0 subnet 255.255.255.0

network of the NatExempt object

10.88.10.0 subnet 255.255.255.0

the Site_to_SiteVPN1 object-group network

object-network 192.168.4.0 255.255.254.0

object-network 172.16.10.0 255.255.255.0

object-network 10.0.0.0 255.0.0.0

outside_access_in deny ip extended access list a whole

inside_access_in of access allowed any ip an extended list

11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

NAT static NatExempt NatExempt of the source (indoor, outdoor)

NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

!

network of the PAT_to_Outside_ClassA object

NAT dynamic interface (indoor, outdoor)

network of the PAT_to_Outside_ClassB object

NAT dynamic interface (indoor, outdoor)

network of the PAT_to_Outside_ClassC object

NAT dynamic interface (indoor, outdoor)

Access-group outside_access_in in interface outside

inside_access_in access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

dynamic-access-policy-registration DfltAccessPolicy

Sysopt connection timewait

Service resetoutside

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto-map dynamic dynmap 10 set pfs

Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

Crypto-map dynamic dynmap 10 the value reverse-road

card crypto mymap 1 match address outside_1_cryptomap

card crypto mymap 1 set counterpart x.x.x.x

card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

card crypto mymap 86400 seconds, 1 lifetime of security association set

map mymap 1 set security-association life crypto kilobytes 4608000

map mymap 100-isakmp ipsec crypto dynamic dynmap

mymap outside crypto map interface

crypto isakmp identity address

Crypto isakmp nat-traversal 30

Crypto ikev1 allow outside

IKEv1 crypto ipsec-over-tcp port 10000

IKEv1 crypto policy 5

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 1

life 86400

IKEv1 crypto policy 50

preshared authentication

the Encryption

md5 hash

Group 2

life 86400

IKEv1 crypto policy 60

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 70

preshared authentication

aes-256 encryption

sha hash

Group 1

life 86400

IKEv1 crypto policy 90

preshared authentication

aes encryption

sha hash

Group 2

life 86400

Telnet timeout 5

Console timeout 0

management-access inside

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal BACKDOORVPN group policy

BACKDOORVPN group policy attributes

value of VPN-filter 11

Ikev1 VPN-tunnel-Protocol

Split-tunnel-policy tunnelall

BH.UK value by default-field

type tunnel-group BACKDOORVPN remote access

attributes global-tunnel-group BACKDOORVPN

address pool Admin_Pool

Group Policy - by default-BACKDOORVPN

IPSec-attributes tunnel-group BACKDOORVPN

IKEv1 pre-shared-key *.

tunnel-group x.x.x.x type ipsec-l2l

tunnel-group ipsec-attributes x.x.x.x

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

Excellent.

Evaluate the useful ticket.

Thank you

Rizwan James

ASA 5505 VPN cannot access inside the host

I have access remote VPN configuration on an ASA 5505, but cannot access the host or the AAS when I connect through the VPN. I can connect with the Cisco VPN client and the VPN is on on the SAA and it shows that I am connected. I have the correct Ip address, but I can't ping or you connect to one of the internal addresses. I can't find what I'm missing. I have the VPN without going through the ACL interface. Because I can connect but not going anywhere I'm sure I missed something.

framework for configuration below

interface Vlan1

nameif inside

security-level 100

10.1.1.1 IP address 255.255.255.0

IP local pool xxxx 10.1.1.50 - 10.1.1.55 mask 255.255.255.0

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto-map dynamic outside_dyn_map 20 set pfs

Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

PFS set 40 crypto dynamic-map outside_dyn_map

Crypto-map dynamic outside_dyn_map 40 value transform-set ESP-3DES-SHA

Crypto-map dynamic inside_dyn_map 20 set pfs

Crypto-map dynamic inside_dyn_map 20 the value transform-set ESP-3DES-SHA

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

outside_map interface card crypto outside

map inside_map 65535-isakmp ipsec crypto dynamic inside_dyn_map

inside crypto map inside_map interface

crypto ISAKMP allow inside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

global service-policy global_policy

XXXXXXX strategy of Group internal

attributes of the strategy group xxxxxxx

banner value xxxxx Site Recovery

WINS server no

24.xxx.xxx.xx value of DNS server

VPN-access-hour no

VPN - connections 3

VPN-idle-timeout 30

VPN-session-timeout no

VPN-filter no

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelall

by default no

disable secure authentication unit

disable authentication of the user

user-authentication-idle-timeout no

disable the IP-phone-bypass

disable the leap-bypass

disable the NEM

disable the NAC

NAC-sq-period 300

NAC-reval-period 36000

NAC-by default-acl no

the address value xxxxxx pools

enable Smartcard-Removal-disconnect

the firewall client no

WebVPN

url-entry functions

Free VPN of CNA no

No vpn-addr-assign aaa

No dhcp vpn-addr-assign

tunnel-group xxxx type ipsec-ra

tunnel-group xxxx general attributes

xxxx address pool

Group Policy - by default-xxxx

blountdr group of tunnel ipsec-attributes

pre-shared-key *.

Missing nat exemption for vpn clients. Add the following and you should be good to go.

inside_nat0_outbound list of allowed ip extended access any 192.168.10.0 255.255.255.0

NAT (inside) 0-list of access inside_nat0_outbound

Cannot access the internal network of VPN with PIX 506th

Hello

I seem to have a problem with the configuration of my PIX. I ping the VPN client from the network in-house, but cannot cannot access all the resources of the vpn client. My running configuration is the following:

Building configuration...

: Saved

:

6.3 (5) PIX version

interface ethernet0 car

Auto interface ethernet1

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

activate the encrypted password of N/JZnmeC2l5j3YTN

2KFQnbNIdI.2KYOU encrypted passwd

hostname SwantonFw2

domain name * *.com

fixup protocol dns-length maximum 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol 2000 skinny

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69

names of

access-list outside_access_in allow icmp a whole

allow_ping list access permit icmp any any echo response

allow_ping list all permitted access all unreachable icmp

access-list allow_ping allow icmp all once exceed

the INSIDE-IN access list allow inside the interface tcp interface outside

list access to the INSIDE-IN permit udp any any eq field

list access to the INSIDE-IN permit tcp any any eq www

list access to the INSIDE-IN permit tcp any any eq ftp

list access to the INSIDE-IN permit icmp any any echo

the INSIDE-IN permit tcp access list everything all https eq

permit access ip 192.168.0.0 list inside_outbound_nat0_acl 255.255.255.0 192.168.240.0 255.255.255.0

swanton_splitTunnelAcl ip access list allow a whole

outside_cryptomap_dyn_20 ip access list allow any 192.168.240.0 255.255.255.0

no pager

Outside 1500 MTU

Within 1500 MTU

192.168.1.150 outside IP address 255.255.255.0

IP address inside 192.168.0.35 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

IP pool local VPN_Pool 192.168.240.1 - 192.168.240.254

location of PDM 0.0.0.0 255.255.255.0 outside

location of PDM 192.168.1.26 255.255.255.255 outside

location of PDM 192.168.240.0 255.255.255.0 outside

PDM logging 100 information

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_outbound_nat0_acl

NAT (inside) 1 192.168.0.0 255.255.255.0 0 0

Access-group outside_access_in in interface outside

group-access INTERIOR-IN in the interface inside

Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

Timeout xlate 0:05:00

Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

AAA-server GANYMEDE + 3 max-failed-attempts

AAA-server GANYMEDE + deadtime 10

RADIUS Protocol RADIUS AAA server

AAA-server RADIUS 3 max-failed-attempts

AAA-RADIUS deadtime 10 Server

AAA-server local LOCAL Protocol

Enable http server

http 192.168.0.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Permitted connection ipsec sysopt

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20

Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-DES-MD5 value

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

client authentication card crypto outside_map LOCAL

outside_map interface card crypto outside

ISAKMP allows outside

ISAKMP identity address

part of pre authentication ISAKMP policy 20

encryption of ISAKMP policy 20

ISAKMP policy 20 md5 hash

20 2 ISAKMP policy group

ISAKMP duration strategy of life 20 86400

Swanton vpngroup address pool VPN_Pool

vpngroup swanton 192.168.1.1 dns server

vpngroup swanton splitting swanton_splitTunnelAcl tunnel

vpngroup idle 1800 swanton-time

swanton vpngroup password *.

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd address 192.168.0.36 - 192.168.0.254 inside

dhcpd dns 8.8.8.8 8.8.4.4

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd outside auto_config

dhcpd allow inside

scott hwDnqhIenLiwIr9B of encrypted privilege 15 password username

username password encrypted ET3skotcnISwb3MV privilege 2 norm

username password tarmbrecht Zre8euXN6HxXaSdE encrypted privilege 2

username, password jlillevik 9JMTvNZm3dLhQM/W encrypted privilege 2

username privilege 15 encrypted password 49ikl05C8VE6k1jG ruralogic

username bzeiter 1XjpdpkwnSENzfQ0 encrypted password privilege 2

name of user mwalla encrypted password privilege 2 l5frk9obrNMGOiOD

username heavyfab1 6.yy0ys7BifWsa9k encrypted password privilege 2

username heavyfab3 6.yy0ys7BifWsa9k encrypted password privilege 2

username heavyfab2 6.yy0ys7BifWsa9k encrypted password privilege 2

username djet encrypted password privilege 2 wj13fSF4BPQzUzB8

username, password cmorgan y/NeUfNKehh/Vzj6 encrypted privilege 2

username password cmayfield Pe/felGx7VQ3I7ls encrypted privilege 2

username privilege 2 encrypted password zQEQceRITRrO4wJa jeffg

Terminal width 80

Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8

: end

[OK]

Any help will be greatly appreciated

BJ,

You try to access resources behind the inside interface network?

IP address inside 192.168.0.35 255.255.255.0

If so, please make the following changes:

1 SWANTON_VPN_SPLIT permit access ip 192.168.0.0 list 255.255.255.0 192.168.240.0 255.255.255.0

2-no vpngroup swanton splitting swanton_splitTunnelAcl tunnel

Swanton vpngroup split tunnel SWANTON_VPN_SPLIT

outside_cryptomap_dyn_20 3-no-list of ip access allowing any 192.168.240.0 255.255.255.0

4 - isakmp nat-traversal 30

Let me know how it goes.

Portu.

Please note all useful posts

Cannot type 'functions' without client Anyconnect VPN setup

Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'function', I can't enter. Can anyone give me some suggestions? Thank you.

internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
WebVPN
functions entry url file-access file-exploration of the mapi port forward files filter entry
HTTP-proxy download automatic citrix

http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

ASA-recent versions, it is configured without the keyword "functions":
```
 asa(config-group-policy)# webvpn asa(config-group-webvpn)# ? Group-policy WebVPN commands: ... file-browsing Allow browsing for file servers and shares file-entry Allow user entry of file server names to access filter Configure the name of the webtype access-list ... port-forward Configure the name of the Port Forwarding applet and auto-download options ... url-entry Control the ability of the user to enter any HTTP/HTTPS URL url-list Configure a list of WebVPN servers/URLs
```

Cannot access static nat address via vpn.

I have an asa5510 where I

a static nat from one interface to the other.

I also have a VPN connection to the asa...

On the other side of the vpn connection, I can not access this static NAT.

192.168.170.x is the vpn network.

Is it not possible to access the static NAT over vpn?

the DM_INLINE_NETWORK_16 object-group network
object-network 192.168.0.0 255.255.255.0
object-network vxtron 255.255.255.0
object-network dmz_zone 255.255.255.0
object-network 192.168.170.0 255.255.255.0

MPLS_nat0_outbound list extended access deny host ip 172.26.1.5 all

Access extensive list ip 172.26.0.0 MPLS_nat0_outbound allow 255.255.252.0 object-group DM_INLINE_NETWORK_16

pnat1 list extended access permit ip host 172.26.1.5 all

static (MPLS, inside) 192.168.0.199 access list pnat1

NAT (MPLS) 0-list of access MPLS_nat0_outbound
NAT (MPLS) 1 172.26.0.0 255.255.252.0
static (MPLS, inside) 172.26.1.5 MPLS_nat_static access list

René, happy you including yourself this one! If you could, please mark the post as solved so that we know that it is not need more attention

one of the VM cannot access network LAN

Hello
I configured 3 VM on an ESXi 4.1 (see attached jpg file). one of the virtual machine (GSPPBPCDBVM), it cannot access the network LAN, even cannot ping Bridge but can ping GSPPBPCVM after I walk today, previously, it was ok. The other 2 VM can access LAN network. What could be the problem?
GSPPBPCVM (128.1.8.x)
GSPPBPCDBVM (128.1.8.x)
AEPAD (10.8.1.x)
vmnic1 (to connect to the local network virtual 128.1.8.x)
vmnic0 (to connect to the local network virtual 10.8.1.x)
Thank you and best regards,
Kelvin

With the configuration you have posted, you have a 50/50 chance that none of your VM will have access to the network, since you have 2 NICs connected to two different VLANS and virtual machines are assigned to these network cards based on the virtual switch port (assuming you use the default settings).

To properly set up the network, you have two options:

1.) VLAN tagging on the physical switch ports (what you have)

In this case, you will need to create a second vSwitch and attach the second NETWORK card to this switch. Then connect virtual machines to the vSwitch and port group that is connected to the switch port VLAN corresponding physics.

2.) VLAN tagging on the virtual port group (this is what I recommend)

Configure the ports on your physical switch as the trunk (or ports 'labelled' If you use Procurve switches), create another port VM on vSwitch0 group and set up VLAN tags on the gropus (VMKernel, VM Network1, VM Network2) port

Take a look at http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf for more information.

André

VPN works, but cannot access the LAN...

I have cisco vpn client connection to a 1721 at the office. the client connects and I can access the office LAN but but not the local network. I have the box checked in client vpn to allow access to the local network. Help, please!

Thank you!

Matt

Here is the config:

Current configuration: 3901 bytes

!

version 12.2

horodateurs service debug datetime msec

Log service timestamps datetime msec

encryption password service

!

Cerberus hostname

!

start the system flash c1700-k9o3sy7 - mz.122 - 11.T10.bin

AAA new-model

!

!

RADIUS AAA server group SERVERS RADIUS

auth-port 1645 192.168.69.1 Server acct-port 1646

!

AAA authentication login LOGIN group SERVERS RADIUS local

local NETGROUPAUTH AAA authorization network

AAA - the id of the joint session

!

username mattheff password xxx

username mikeheff password xxx

clock timezone CST - 6

clock to summer time recurring CDT 2 Sun Mar 2:00 1 Sun Nov 02:00

IP subnet zero

!

!

IP domain name heffnet.net

name of the IP-server 68.94.156.1

name of the IP-server 68.94.157.1

DHCP excluded-address IP 192.168.69.1 192.168.69.99

DHCP excluded-address IP 192.168.69.111 192.168.69.254

!

dhcp HEFFNET_LAN_POOL_1 IP pool

network 192.168.69.0 255.255.255.0

router by default - 192.168.69.254

Server DNS 68.x.x.1 68.94.157.1

!

audit of IP notify Journal

Max-events of po verification IP 100

VPDN enable

!

VPDN-group pppoe

demand dial

Protocol pppoe

!

!

!

crypto ISAKMP policy 3

BA 3des

preshared authentication

Group 2

!

Configuration group VPNGROUP crypto isakmp client

8mathef8 key

68.x.x.1 DNS 68.94.157.1

heffnet.net field

pool VPN_CLIENT_POOL

ACL 102

!

!

Crypto ipsec transform-set esp-3des esp-sha-hmac VPNSET1

!

crypto dynamic-map 10 DYNMAP

game of transformation-VPNSET1

!

!

list of authentication of card crypto VPNCLIENTMAP customer LOGIN

list of crypto isakmp NETGROUPAUTH VPNCLIENTMAP card authorization

crypto card for the VPNCLIENTMAP client configuration address respond

card crypto VPNCLIENTMAP 10-isakmp dynamic ipsec DYNMAP

!

!

!

!

interface Loopback0

IP address 1.1.x.x.255.255.252

!

ATM0 interface

Heffnet WAN/SBC DSL Interface Description

no ip address

No atm ilmi-keepalive

PVC 0/35

PPPoE-client dial-pool-number 69

!

DSL-automatic operation mode

no fair queue

!

interface FastEthernet0

Heffnet LAN Interface Description

IP 192.168.69.254 255.255.255.0

IP nat inside

IP tcp adjust-mss 1452

route VPN_ROUTE_MAP card intellectual property policy

automatic speed

!

interface Dialer69

MTU 1492

the negotiated IP address

NAT outside IP

encapsulation ppp

Dialer pool 69

PPP chap hostname cerberus

PPP chap password xxx

PPP pap sent-username [email protected] / * / password xxx

card crypto VPNCLIENTMAP

!

local IP VPN_CLIENT_POOL 192.168.70.200 pool 192.168.70.253

IP nat inside source list interface INTERNALLY Dialer69 overload

!

IP classless

IP route 0.0.0.0 0.0.0.0 Dialer69

no ip address of the http server

!

!

INTERNAL extended IP access list

deny ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255

IP 192.168.69.0 allow 0.0.0.255 any

!

record 192.168.69.1

access-list 101 permit ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255

access-list 102 permit ip 192.168.69.0 0.0.0.255 any

!

VPN_ROUTE_MAP allowed 10 route map

corresponds to the IP 101

set ip next-hop 1.1.1.2

!

alias exec s show ip interface brief

alias exec sr show running-config

!

Line con 0

privilege level 15

Synchronous recording

line to 0

privilege level 15

Synchronous recording

line vty 0 4

privilege level 15

Synchronous recording

line vty 5 15

privilege level 15

Synchronous recording

!

Scheduler allocate 4000 1000

end

Hi Matt,

The config looks good. Please make sure that you get a route to 192.168.69.0 255.255.255.0 network only after the connection to the VPN client. Please also correspond to the exit "route print" before and after the connection. One last thing, I hope that the local network is not 192.168.69.0.

HTH,

Please rate if this helps,

Kind regards

Kamal

On ASA 5505 VPN cannot access remote (LAN)

I have an ASA 5505 upward and running, all static NAT statements I need to forward ports to the internal services such as smtp, desktop remotely and it works very well, however I have set up an IPSEC vpn connection that authenticates to our DC and part works. However, after I connect and cannot ping anything on the local network or access services. I don't know what a NAT statement I have corrected. Here is the config. I really need to get this up and going tomorrow. Thanks for any help.

Tyler

Just remove the line of nat (outside) and ACL outside_nat0_outbound.

And talk about these statements:

IPSec-1 sysopt connection permit... (If it is disabled, you can check with sh run sysopt).

2, crypto isakmp nat traversal 10 or 20

3 no NAT ACL, mention your local subnets as the source and vpn client as the destination.

4, create the other ACL (ST) with different name and source and destination like no nat ACL.

5, then type nat (inside) 0 access-list sheep

6, in the dwgavpn group policy, talk to splittunnel tunnelspecified and mention the tunnel split ACL (ST).

Concerning

Remote VPN cannot access devices LAN or internet

So I have a server and a computer inside that I can access through an ASA 5505 with ASA 9.2 (1) and ASDM 7.2 (1)

The computer on 192.168.1.110 via port 8080 can show me a demo site.

The server on 192.168.1.222 got my DNS, HTTP, FTP, mail and more about it.

Outside, I got a computer (by outside, I hear from the firewall and the cable directly into the computer) on 192.168.20.2 and firewall outside being 192.168.20.1

From the outside I can access the 8080 without problem (and I guess as well with the server, but it is on another default gateway and are not accessible right now). -When I connect through my VPN I am assigned 192.168.30.5 but unable to connect inside the computer through 192.168.1.110:8080.

This will return the error: asymmetrical NAT rules matched for before and back flow; Connection for udp src outdoors: 192.168.30.5/49608 (...) dst inside: 192.168.1.222/53 refused because of the failure of the path reverse NAT.

Somewhere, I had a conflict or a non-created access rule. Anyone who wants to take a shot?

I marked with "BOLD" for what I thought that may be the cause.

ciscoasa (config) # sh running-config
: Saved
:
ASA Version 9.2 (1)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
2KFQnbNIdI.2KYOU encrypted passwd
names of
192.168.30.5 mask - 192.168.30.200 local pool Pool of IP IP 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
address 192.168.20.1 255.255.255.0
!
boot system Disk0: / asa921 - k8.bin
passive FTP mode
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
object network testServer-8080
host 192.168.1.110
Description of the test server
network of the object server-21
Home 192.168.1.222
Description of the test server
network of the object Server-25
Home 192.168.1.222
Description of the test server
network of the object Server-53
Home 192.168.1.222
Description of the test server
network of the object server-80
Home 192.168.1.222
Description of the test server
network of the object server-443
Home 192.168.1.222
Description of the test server
network of the object server-2525
Home 192.168.1.222
Description of the test server
network of the object server-993
Home 192.168.1.222
Description of the test server
network of the object server-6001
Home 192.168.1.222
Description of the test server
network of the object server-6002
Home 192.168.1.222
Description of the test server
network of the object server-6003
Home 192.168.1.222
Description of the test server
network of the object server-6004
Home 192.168.1.222
Description of the test server
network of the VPN HOST object
192.168.30.0 subnet 255.255.255.0
network of the object inside
host 192.168.1.0
the vpn server object network
Home 192.168.1.222
outside_access_in list extended access permit tcp any object testServer-8080 eq 8080
outside_access_in list extended access permit tcp any object server-21 eq ftp
outside_access_in list extended access permit tcp any object Server-25 eq smtp
outside_access_in list extended access permit tcp any object server-2525 2525 eq
outside_access_in list extended access permit udp any object server-53 eq inactive field
outside_access_in list extended access permit tcp any object server-80 eq www
outside_access_in list extended access permit tcp any object server-443 https eq
outside_access_in list extended access permit tcp any object server-993 993 eq
outside_access_in list extended access permit tcp any object server-6001 eq 6001
outside_access_in list extended access permit tcp any object server-6002 6002 eq
outside_access_in list extended access permit tcp any object server-6003 eq 6003
outside_access_in list extended access permit tcp any object server-6004 eq 6004
outside_access_in to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.30.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 721.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) VPN-dynamic HOSTS within static destination to source Server VPN - vpn server
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
object network testServer-8080
NAT (inside, outside) interface static 8080 8080 tcp service
network of the object server-21
NAT static (inside, inside) of the service ftp ftp tcp interface
network of the object Server-25
NAT (inside, outside) interface static tcp smtp smtp service
network of the object Server-53
NAT static (inside, inside) interface tcp service area
network of the object server-80
NAT (inside, outside) interface static tcp www www service
network of the object server-443
NAT (inside, outside) interface static tcp https https service
network of the object server-2525
NAT (inside, outside) interface static 2525 2525 tcp service
network of the object server-993
NAT (inside, outside) interface static tcp 993 993 service
network of the object server-6001
NAT (inside, outside) interface static tcp 6001 6001 service
network of the object server-6002
NAT (inside, outside) interface static tcp 6002 6002 service
network of the object server-6003
NAT (inside, outside) interface static 6003 6003 tcp service
network of the object server-6004
NAT (inside, outside) interface static service tcp 6004 6004
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS AAA server HSS-auth-server protocol
allow only
AAA-server HSS-auth-server (inside) host 192.168.1.222
Timeout 5
key *.
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
trustpool crypto ca policy
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0

dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal HSSvpn group strategy
attributes of Group Policy HSSvpn
value of server DNS 192.168.1.222
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value outside_access_in ! This value was its own name earlier
HSS.dk value by default-field
type tunnel-group HSSvpn remote access
attributes global-tunnel-group HSSvpn
address IP-pool pool
HSS-auth-server authentication-server-group
Group Policy - by default-HSSvpn
password-management
IPSec-attributes tunnel-group HSSvpn
IKEv1 pre-shared-key *.
tunnel-group HSSvpn ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:9859258e11364180cf9b3e21173b3f2f
: end

Hello

"Nat" bold configuration is incorrect, as you would expect.

Replace it with something like this

the object of the LAN network
subnet 192.168.1.0 255.255.255.0

NAT (inside, outside) 1 static source LAN LAN to static destination HOST-VPN-VPN-HOST

I also suggest using a separate access the ACL of the Tunnel from Split 'standard' list.

For example

standard SPLIT-TUNNEL access list permit 192.168.1.0 255.255.255.0

Naturally, you must pass the ACL above to used "group policy" .

In addition, if you want to control the incoming connections to VPN users in 'outside_access_in' ACL, then you could change the default settings on the SAA by running the command

No vpn sysopt connection permit

If you need to return back then just to deliver without 'no' in front. Then back to its default value. This does not show in the running configuration by the way.

With this setting all connections from VPN connections should be allowed on the interface ACL interface that ends the VPN connection. If in your case that would be the ACL attached to the 'outside' interface.

Hope this helps :)

-Jouni

Cannot access ' inside' LAN of AnyConnect VPN

Similar Questions

Maybe you are looking for