ASA checks AnyConnect VPN computer name

Hi all

I have searched the Forum and documentation, but have not found a solution to my problem.  I'm guessing it happens sometimes, but maybe I'm looking for the wrong thing.  We AnyConnect deployed across our cell phones, but have trouble with employees who do get the software from other sources AnyConnect and install on personal computers.  We are an agency, although relatively small, but we have policies in place and I need to lock for users unable to connect to the VPN unless you're a book PC connected to our AD domain.  I found a possible solution is to use dynamic access within the ASA policies to check the Windows computer name.  So I set up LDAP and has created a policy to check an AAA attribute.  It lets me select "MemberOf", which I assume it is the Group of users, but I need to check the name of the computer on the client before allowing access.

Step by step of what I did, does anyone know of a more logical or easier way to lock on what AnyConnect VPN client computers can be used?

Or if I go about this common sense with dynamic access policies, anyone have any suggestions or knowledge of documentation that helps to configure things properly when you check the computer name LDAP attribute?

Thank you!

JD

Hey Joe,

You do not need LDAP to do this, what you need is CSD (Cisco Secure Desktop) combined with DAP.

Once you enable SSC, edit your DAP strategy and instead of an IPN to attribute you to try, add an attribute of endpoint (on the right hand side).

To verify the host name, select the type of the attribute "peripheral".

Alternatively, you can also activate the sweep of host (under Contract) and let the CSD to check the presence of a file with a certain file name, or a registry entry or a process name. CSD passes the result of this verification to the PAD, so you can use it in a policy (attributes of endpoint of type process, registry and files).

Another alternative is to use the CSD with a policy before opening session - that you cannot check the host name, but it does not have control over the IP, OS type, certificate as well as the presence of a process, the registry key, the file. In this case you need not to DAP.

HTH

Herbert

Tags: Cisco Security

Similar Questions

  • MAC and PC can reach the same an ASA for Anyconnect VPN?

    Hi, we have MAC and PC users. We configure the Anyconnect VPN in an ASA. But two users need two image of sorts. We must therefore use the two commands:

    AnyConnect image disk0: / anyconnect -win- 3.1.04066 - k9.pkg

    AnyConnect image disk0: / anyconnect -macosx- i386 - 2.5.2014 - k9.pkg.

    This is what two commands cannot coexist in an ASA. How to solve the problem? I hope your suggestion. Thank you

    They can co-exist, but you must add different sequence numbers at the end of each command.

  • Cisco ASA and AnyConnect VPN certificate error

    Hello

    I am trying to configure Cisco AnyConnect VPN and everything works, but I get this warning message when the connection is opened:

    I don't have public certificate in ASA. Is it possible to use the self-signed certificate and get rid of this warning message?

    Hello

    This is expected behavior on the SAA for an SSL connection. You can certainly use the certificate self-signed on the SAA and then apply it on the external interface.
    Once done, you will need to install this certificate on the clients and this will alleviate the popup error message.

    Here is a document that you can refer to create a self-signed certificate.
    https://supportforums.Cisco.com/document/44116/ASA-self-signed-certificate-WebVPN

    Kind regards
    Dinesh Moudgil

    PS Please note the useful messages.

  • Select the timeout on ASA Cisco Anyconnect VPN

    Hello world

    I use the Cisco Anyconnect VPN client with the ASA 5540 firewall. I need allow a time-out on the VPN clients, so they log off after x hours of inactivity.

    Thank you to

    Best respect

    Hello

    To my understanding of the default timeout value is 30 minutes

    You should be able to change this setting in the "username" configurations (if you use LOCAL AAA on the SAA) or under the configurations of the 'group policy' .

    The command is

    VPN-idle-timeout

    Here is the link of the commands reference

    http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

    -Jouni

  • SSH for indoor or outdoor IP de ASA over anyconnect vpn

    Hello world

    I have ssl anyconnect vpn for my lab at home.

    When I connect via anyconnect SSL I am unable to ssh to ASA inside and outside IP is this default behavior?

    I have access to administration config inside configured on the SAA.

    VPN IP 10.10.10.10 pool

    SSH 10.10.10.0 255.255.255.0 outside

    Concerning

    Mahesh

    Try adding a line like:

    nat (outside,any) source static vpn_pool_ip vpn_pool_ip destination static inside inside no-proxy-arp

  • ASA 5512 Anyconnect VPN cannot connect inside the network 9.1 x

    Hello

    I'm new to ASA, can I please help with this. I managed to connect to the vpn through the mobility cisco anyconnect client, but I am unable to connect to the Internet. the allocated ip address was 172.16.1.60 and it seems OK, I thought my acl and nat is configured to allow and translate the given vpn ip pool but I'm not able to ping anything on the inside.

    If anyone can share some light... There's got to be something escapes me...

    Here's my sh run

    Thank you

    Raul

    -------------------------------------------------------------------------------

    DLSYD - ASA # sh run

    : Saved
    :
    ASA 9.1 Version 2
    !
    hostname DLSYD - ASA
    domain delo.local
    activate the encrypted password of UszxwHyGcg.e6o4z
    names of
    mask 172.16.1.60 - 172.16.1.70 255.255.255.0 IP local pool DLVPN_Pool
    !
    interface GigabitEthernet0/0
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet0/1
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet0/2
    Post description
    10 speed
    full duplex
    nameif Ext
    security-level 0
    IP 125.255.160.54 255.255.255.252
    !
    interface GigabitEthernet0/3
    Description Int
    10 speed
    full duplex
    nameif Int
    security-level 100
    IP 192.168.255.2 255.255.255.252
    !
    interface GigabitEthernet0/4
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet0/5
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Management0/0
    management only
    nameif management
    security-level 100
    IP 192.168.1.1 255.255.255.0
    !
    boot system Disk0: / asa912-smp - k8.bin
    passive FTP mode
    clock timezone IS 10
    clock daylight saving time EDT recurring last Sun Oct 02:00 last Sun Mar 03:00
    DNS lookup field inside
    DNS domain-lookup Int
    DNS server-group DefaultDNS
    192.168.1.90 server name
    192.168.1.202 server name
    domain delo.local
    permit same-security-traffic intra-interface
    network dlau40 object
    Home 192.168.1.209
    network dlausyd02 object
    host 192.168.1.202
    network of the object 192.168.1.42
    host 192.168.1.42
    dlau-utm network object
    host 192.168.1.50
    network dlauxa6 object
    Home 192.168.1.62
    network of the 192.168.1.93 object
    host 192.168.1.93
    network dlau-ftp01 object
    Home 192.168.1.112
    dlau-dlau-ftp01 network object
    network dlvpn_network object
    subnet 172.16.1.0 255.255.255.0
    the object-group Good-ICMP ICMP-type
    echo ICMP-object
    response to echo ICMP-object
    ICMP-object has exceeded the time
    Object-ICMP traceroute
    ICMP-unreachable object
    DLVPN_STAcl list standard access allowed 192.168.0.0 255.255.0.0
    Standard access list DLVPN_STAcl allow 196.1.1.0 255.255.255.0
    DLVPN_STAcl list standard access allowed 126.0.0.0 255.255.0.0
    Ext_access_in access list extended icmp permitted any object-group Good-ICMP
    Ext_access_in list extended access permitted tcp dlau-ftp01 eq ftp objects
    Ext_access_in list extended access permit tcp any object dlausyd02 eq https
    Ext_access_in list extended access permit tcp any object dlau-utm eq smtp
    Ext_access_in list extended access permit tcp any object dlauxa6 eq 444
    Ext_access_in access-list extended permitted ip object annete-home everything
    pager lines 24
    Enable logging
    asdm of logging of information
    MTU 1500 Ext
    MTU 1500 Int
    management of MTU 1500
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 713.bin
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    NAT (Int, Ext) static source any any destination static dlvpn_network dlvpn_network non-proxy-arp
    !
    network dlausyd02 object
    NAT (Int, Ext) interface static tcp https https service
    dlau-utm network object
    NAT (Int, Ext) interface static tcp smtp smtp service
    network dlauxa6 object
    NAT (Int, Ext) interface static tcp 444 444 service
    network dlau-ftp01 object
    NAT (Int, Ext) interface static tcp ftp ftp service
    Access-group Ext_access_in in Ext interface
    Route Ext 0.0.0.0 0.0.0.0 125.255.160.53 1
    Route Int 192.168.0.0 255.255.0.0 192.168.255.1 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    AAA authentication enable LOCAL console
    AAA authentication LOCAL telnet console
    AAA authentication http LOCAL console
    LOCAL AAA authentication serial console
    the ssh LOCAL console AAA authentication
    http server enable 44310
    http server idle-timeout 30
    http 192.168.0.0 255.255.0.0 Int
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
    Crypto ipsec pmtu aging infinite - the security association
    trustpool crypto ca policy
    Telnet 192.168.1.0 255.255.255.0 management
    Telnet timeout 30
    SSH 192.168.0.0 255.255.0.0 Int
    SSH timeout 30
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0
    No ipv6-vpn-addr-assign aaa
    no local ipv6-vpn-addr-assign
    management of 192.168.1.2 - dhcpd address 192.168.1.254
    enable dhcpd management
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    NTP server 61.8.0.89 prefer external source
    SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
    WebVPN
    port 44320
    allow outside
    Select Ext
    AnyConnect essentials
    AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
    AnyConnect enable
    tunnel-group-list activate
    internal GroupPolicy_DLVPN group strategy
    attributes of Group Policy GroupPolicy_DLVPN
    WINS server no
    value of server DNS 192.168.1.90 192.168.1.202
    client ssl-VPN-tunnel-Protocol
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list DLVPN_STAcl
    delonghi.local value by default-field
    WebVPN
    AnyConnect Dungeon-Installer installed
    time to generate a new key 30 AnyConnect ssl
    AnyConnect ssl generate a new method ssl key
    AnyConnect ask flawless anyconnect
    encrypted vendor_ipfx pb6/6ZHhaPgDKSHn password username
    vendor_pacnet mIHuYi1jcf9OqVN9 encrypted password username
    username admin password encrypted tFU2y7Uo15ahFyt4
    type tunnel-group DLVPN remote access
    attributes global-tunnel-group DLVPN
    address pool DLVPN_Pool
    Group Policy - by default-GroupPolicy_DLVPN
    tunnel-group DLVPN webvpn-attributes
    enable DLVPN group-alias
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the netbios
    Review the ip options
    inspect the ftp
    inspect the tftp
    !
    global service-policy global_policy
    SMTPS
    Server 192.168.1.50
    Group Policy - by default-DfltGrpPolicy
    context of prompt hostname
    no remote anonymous reporting call
    Cryptochecksum:67aa840d5cfff989bc045172b2d06212
    : end
    DLSYD - ASA #.

    Hello

    Add just to be sure, the following configurations related to ICMP traffic

    Policy-map global_policy
    class inspection_default
    inspect the icmp
    inspect the icmp error

    Your NAT0 configurations for traffic between LAN and VPN users seem to. Your Split Tunnel ACL seems fine too because it has included 192.168.0.0/16. I don't know what are the other.

    I wonder if this is a test installation since you don't seem to have a dynamic PAT configured for your local network at all. Just a few static PAT and the NAT0 for VPN configurations. If it is a test configuration yet then confirmed that the device behind the ASA in the internal network has a default route pointing to the ASAs interface and if so is it properly configured?

    Can you same ICMP the directly behind the ASA which is the gateway to LANs?

    If you want to try ICMP interface internal to the VPN ASA then you can add this command and then try ICMP to the internal interface of the ASA

    Int Management-access

    As the post is a little confusing in the sense that the subject talk on the traffic doesn't work not internal to the network, while the message mentions the traffic to the Internet? I guess you meant only traffic to the local network because you use Split Tunnel VPN, which means that Internet traffic should use the VPN local Internet users while traffic to the networks specified in the ACL Tunnel Split list should be sent to the VPN.

    -Jouni

  • Anyconnect VPN management if password password has already expired

    Hello

    I have ASA Cisco AnyConnect vpn with Microsoft AD ldaps authentication. In the Group of the tunnel, I configured management password (password expire days 14). It works but my testing it seems to be no possible to update the password if it is already expired. No way to solve this problem?

    Thank you

    Hi, Giuseppe.

    Yes, the change of password should work even when he arrived at expiration.

    Maybe you can try placing screenshots on the user and the server and make sure that the TCP process is successful when the password has expired.

    -Javier-

  • PC may have the connection, but why MAC cannot have Anyconnect VPN?

    Hi, we have MAC and PC users. Two users could reach inside the network through ASA and Anyconnect VPN. However, MAC users can not have connection (please see screenshot in attachment). The output of the show run webvpn command is below:

    Act(config-WebVPN) # sh run webvpn
    WebVPN
    allow outside
    allow inside
    CSD image disk0:/csd_3.5.841-k9.pkg
    AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1
    AnyConnect enable
    tunnel-group-list activate
    Auto-signon allow ip 0.0.0.0 0.0.0.0 auth-type all the

    The lack of configuration ""anyconnect image disk0: /anyconnect -macosx- i386 - 2.5.2014 - k9.pkg "all the time." We don't think that this is the reason why MAC users are unable to reach the inside of the network because we do not have this command for a long time. Any suggestions can give? Thank you.

    > The question is that the command for MAC was not there for long. Why is it could work when the order wasn't there?

    I don't know, but I remember that in versions, it was not necessary to have * all * images in flash. Perhaps this changed some time. , You upgrade your ASA recently before the problems began?

  • ASA Anyconnect VPN do not work or download the VPN client

    I have a Cisco ASA 5505 that I try to configure anyconnect VPN and thought, I've changed my setup several times but trying to access my static public IP address of the external IP address to download the image, I am not able to. Also when I do a package tracer I see he has been ignored through the acl when the packets from side to the ASA via port 443, it drops because of the ACL. My DMZ so will he look like something trying to access the ASA via the VPN's going to port 443. Here is my config

    XXXX # sh run
    : Saved
    :
    ASA Version 8.4 (3)
    !
    hostname XXXX
    search for domain name
    activate pFTzVNrKdD9x5rhT encrypted password
    zPBAmb8krxlXh.CH encrypted passwd
    names of
    !
    interface Ethernet0/0
    Outside-interface description
    switchport access vlan 20
    !
    interface Ethernet0/1
    Uplink DMZ description
    switchport access vlan 30
    !
    interface Ethernet0/2
    switchport access vlan 10
    !
    interface Ethernet0/3
    switchport access vlan 10
    !
    interface Ethernet0/4
    Ganymede + ID description
    switchport access vlan 10
    switchport monitor Ethernet0/0
    !
    interface Ethernet0/5
    switchport access vlan 10
    !
    interface Ethernet0/6
    switchport access vlan 10
    !
    interface Ethernet0/7
    Description Wireless_AP_Loft
    switchport access vlan 10
    !
    interface Vlan10
    nameif inside
    security-level 100
    IP 192.168.10.1 255.255.255.0
    !
    interface Vlan20
    nameif outside
    security-level 0
    IP address x.x.x.249 255.255.255.248
    !
    Vlan30 interface
    no interface before Vlan10
    nameif dmz
    security-level 50
    IP 172.16.30.1 255.255.255.0
    !
    boot system Disk0: / asa843 - k8.bin
    passive FTP mode
    DNS lookup field inside
    DNS domain-lookup outside
    DNS domain-lookup dmz
    DNS server-group DefaultDNS
    Name-Server 8.8.8.8
    Server name 8.8.4.4
    search for domain name
    network obj_any1 object
    subnet 0.0.0.0 0.0.0.0
    network of the Webserver_DMZ object
    Home 172.16.30.8
    network of the Mailserver_DMZ object
    Home 172.16.30.7
    the object DMZ network
    172.16.30.0 subnet 255.255.255.0
    network of the FTPserver_DMZ object
    Home 172.16.30.9
    network of the Public-IP-subnet object
    subnet x.x.x.248 255.255.255.248
    network of the FTPserver object
    Home 172.16.30.8
    network of the object inside
    192.168.10.0 subnet 255.255.255.0
    network of the VPN_SSL object
    10.101.4.0 subnet 255.255.255.0
    outside_in list extended access permit tcp any newspaper object Mailserver_DMZ eq www
    outside_in list extended access permit tcp any newspaper EQ 587 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper SMTP object Mailserver_DMZ eq
    outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq pop3 object
    outside_in list extended access permit tcp any newspaper EQ 2525 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq imap4 object
    outside_in list extended access permit tcp any newspaper EQ 465 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper EQ 993 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper EQ 995 object Mailserver_DMZ
    outside_in list extended access permit tcp any newspaper EQ 5901 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper Mailserver_DMZ eq https object
    Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel
    vpn_SplitTunnel list standard access allowed 192.168.10.0 255.255.255.0
    pager lines 24
    Enable logging
    timestamp of the record
    exploitation forest-size of the buffer to 8192
    logging trap warnings
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    MTU 1500 dmz
    local pool VPN_SSL 10.101.4.1 - 10.101.4.4 255.255.255.0 IP mask
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 647.bin
    don't allow no asdm history
    ARP timeout 14400
    NAT (inside, outside) static source inside inside static destination VPN_SSL VPN_SSL
    NAT (exterior, Interior) static source VPN_SSL VPN_SSL
    !
    network obj_any1 object
    NAT static interface (indoor, outdoor)
    network of the Webserver_DMZ object
    NAT (dmz, outside) static x.x.x.250
    network of the Mailserver_DMZ object
    NAT (dmz, outside) static x.x.x.. 251
    the object DMZ network
    NAT (dmz, outside) static interface
    Access-group outside_in in external interface
    Route outside 0.0.0.0 0.0.0.0 x.x.x.254 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    AAA-server protocol Ganymede HNIC +.
    AAA-server host 192.168.10.2 HNIC (inside)
    Timeout 60
    key *.
    identity of the user by default-domain LOCAL
    Console HTTP authentication AAA HNIC
    AAA console HNIC ssh authentication
    Console AAA authentication telnet HNIC
    AAA authentication secure-http-client
    http 192.168.10.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ca trustpoint localtrust
    registration auto
    Configure CRL
    Crypto ca trustpoint VPN_Articulate2day
    registration auto
    name of the object CN = vpn.articulate2day.com
    sslvpnkey key pair
    Configure CRL
    Telnet 192.168.10.0 255.255.255.0 inside
    Telnet timeout 30
    SSH 192.168.10.0 255.255.255.0 inside
    SSH timeout 15
    SSH version 2
    Console timeout 0
    No vpn-addr-assign aaa

    DHCP-client update dns
    dhcpd dns 8.8.8.8 8.8.4.4
    dhcpd outside auto_config
    !
    dhcpd address 192.168.10.100 - 192.168.10.150 inside
    dhcpd allow inside
    !
    dhcpd address dmz 172.16.30.20 - 172.16.30.23
    dhcpd enable dmz
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    authenticate the NTP
    NTP server 192.168.10.2
    WebVPN
    allow outside
    AnyConnect image disk0:/anyconnect-linux-64-3.1.06079-k9.pkg 1
    AnyConnect enable
    tunnel-group-list activate
    internal VPN_SSL group policy
    VPN_SSL group policy attributes
    value of server DNS 8.8.8.8
    client ssl-VPN-tunnel-Protocol
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list vpn_SplitTunnel
    the address value VPN_SSL pools
    WebVPN
    activate AnyConnect ssl dtls
    AnyConnect Dungeon-Installer installed
    AnyConnect ssl keepalive 15
    AnyConnect ssl deflate compression
    AnyConnect ask enable
    ronmitch50 spn1SehCw8TvCzu7 encrypted password username
    username ronmitch50 attributes
    type of remote access service
    type tunnel-group VPN_SSL_Clients remote access
    attributes global-tunnel-group VPN_SSL_Clients
    address VPN_SSL pool
    Group Policy - by default-VPN_SSL
    tunnel-group VPN_SSL_Clients webvpn-attributes
    enable VPNSSL_GNS3 group-alias
    type tunnel-group VPN_SSL remote access
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    inspect esmtp
    !
    global service-policy global_policy
    context of prompt hostname
    no remote anonymous reporting call
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
    : end

    XXXX #.

    You do not have this configuration:

     object network DMZ nat (dmz,outside) static interface

    Try and take (or delete):

     object network DMZ nat (dmz,outside) dynamic interface

  • IP Phone/Android IPSEC VPN to ASA using AnyConnect

    With course of Blackberry support in our Organization, we are eager to implement, configure, and deploy a vpn to access remote ipsec Ikev2 of our ASA 5540 9.1 (5) 19 (license Premium VPN) for the iphone and android.

    Was so fair to ask is - it possible, if it is possible, what is the best approach to take, and if someone has a recommended best practices?

    And do we need to purchase several licenses for AnyConnect for Mobile?

    As looked at loads of documentation, but have I just more confused.

    So, any help much appreciated.

    Thank you

    NESSIE

    Hi Nessie,

    Please visit the link for more details below:

    http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

    Link below shows the license you need for ASA for anyconnect on mobile devices.

    http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-app...

    Kind regards

    Kanwal

    Note: Please check if they are useful.

  • Would become Anyconnect essentials Premium AnyConnect vpn on asa

    Dear team,

    We have a pair of cisco ASA 5520 with version 8.2 (5) works well with active mode / standby. As the situation requires, we intend to change the SSL vpn to clientless SSL VPN (AnyConnect Premium) to anyconnect vpn with mobile clients (IOS & Android)

    Please specify below

    (1) I have read, we cannot have two Anyconnect Essentials & AnyConnect Premium on the same system time. We need to disable accordingly to our need-pl correct me?

    (2) what is the best way to have the device for end-user client deployment? pushing of ASA or install individually on the system? Can I have the best, I mean the latest version of windows, client MAC e.t.c I shud get?

    While pushing ASA LU that much memory cache will be used, since we have IPS (AIP - SSM) modules has also installed on ASA who shud method I adopt here?

    (3) what is the exact product for license Anyconnect Essentials & customer name mobile (IOS & Android) we get from cisco?

    (4) once I get the correct license how do I active in systems? should I remove the failover command and install the license in two devices separately?

    (5) Finally, I need to authenticate vpn anyconnect essentials with LDAP that is already configured for clientless SSL VPN(AnyConnect Premium). any suggestions here?

    Below the version Sh emitted by the devices, it seems essential Anyconnect is already active... Please correct me?

    Active Firewall
    ===============

    System image file is "disk0: / asa825 - k8.bin.
    The configuration file to the startup was "startup-config '.

    Material: ASA5520, 2048 MB RAM, Pentium 4 Celeron 2000 MHz processor
    Internal ATA Compact Flash, 256 MB
    BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

    Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
    Start firmware: CN1000-MC-BOOT - 2.00
    SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
    Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

    0: Ext: GigabitEthernet0/0: the address is a493.4ca3.ce0a, irq 9
    1: Ext: GigabitEthernet0/1: the address is a493.4ca3.ce0b, irq 9
    2: Ext: GigabitEthernet0/2: the address is a493.4ca3.ce0c, irq 9
    3: Ext: GigabitEthernet0/3: the address is a493.4ca3.ce0d, irq 9
    4: Ext: Management0/0: the address is a493.4ca3.ce09, irq 11
    5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
    6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

    The devices allowed for this platform:
    The maximum physical Interfaces: unlimited
    VLAN maximum: 150
    Internal hosts: unlimited
    Failover: Active/active
    VPN - A: enabled
    VPN-3DES-AES: enabled
    Security contexts: 2
    GTP/GPRS: disabled
    SSL VPN peers: 2
    Total of the VPN peers: 750
    Sharing license: disabled
    AnyConnect for Mobile: disabled
    AnyConnect Cisco VPN phone: disabled
    AnyConnect Essentials: enabled
    Assessment of Advanced endpoint: disabled
    Proxy sessions for the UC phone: 2
    Total number of Sessions of Proxy UC: 2
    Botnet traffic filter: disabled

    This platform includes an ASA 5520 VPN Plus license.

    =====================================================

    Firewall standby
    ================

    Updated Saturday, May 20, 11 16:00 by manufacturers
    System image file is "disk0: / asa825 - k8.bin.
    The configuration file to the startup was "startup-config '.

    Material: ASA5520, 2048 MB RAM, Pentium 4 Celeron 2000 MHz processor
    Internal ATA Compact Flash, 256 MB
    BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

    Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
    Start firmware: CN1000-MC-BOOT - 2.00
    SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
    Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

    0: Ext: GigabitEthernet0/0: the address is 6073.5cab.3fae, irq 9
    1: Ext: GigabitEthernet0/1: the address is 6073.5cab.3faf, irq 9
    2: Ext: GigabitEthernet0/2: the address is 6073.5cab.3fb0, irq 9
    3: Ext: GigabitEthernet0/3: the address is 6073.5cab.3fb1, irq 9
    4: Ext: Management0/0: the address is 6073.5cab.3fb2, irq 11
    5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
    6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

    The devices allowed for this platform:
    The maximum physical Interfaces: unlimited
    VLAN maximum: 150
    Internal hosts: unlimited
    Failover: Active/active
    VPN - A: enabled
    VPN-3DES-AES: enabled
    Security contexts: 2
    GTP/GPRS: disabled
    SSL VPN peers: 2
    Total of the VPN peers: 750
    Sharing license: disabled
    AnyConnect for Mobile: disabled
    AnyConnect Cisco VPN phone: disabled
    AnyConnect Essentials: enabled
    Assessment of Advanced endpoint: disabled
    Proxy sessions for the UC phone: 2
    Total number of Sessions of Proxy UC: 2
    Botnet traffic filter: disabled

    This platform includes an ASA 5520 VPN Plus license.

    Thank you

    1 correct. You can run one or the other, but not both.

    2 since you have the upgrade memory to 2 GB, you should be fine perform web deployment via the pkg file method.

    3. for a 5520, you need:

    L-ASA-AC-E-5520 =
    L-ASA-AC-M-5520

    .. .to the Essentials and Mobile licenses respectively.

    4. on ASA 8.2, you need licenses for both units. If you upgrade to 8.3 + (8.4 (7) recommend at least), you can share licenses between members of a pair of HA. If you choose not to upgrade, just apply the key of activation on the rescue unit, then on the unit activates. You don't need to move on and in the failover configuration. Failover of the rescue unit status will show as ineligible briefly while he holds the new license is not the case of the active unit. Which will be resolved after you have applied the same license on the main unit. (If you were on 8.3 + would not happen at all).

    5. simply create a new connection profile for customers of Essentials by using the same AAA server group.

  • How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

    Hi team

    Hope you do well. !!!

    currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

    1 users will connect: user advanced browser on SSL VPN pop past username and password.

    2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

    3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

    4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

    This is my requirement, so someone please guide me how to set up step by step.

    1. how to set up the Radius Server?

    2. how to configure CISCO ASA?

    Thanks in advance.

    Hey Chick,

    Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

    http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

    Hope this helps

    Knockaert

  • AnyConnect VPN is not access to the ASA

    Hello

    I have an ASA 5512 - x configured as a hub AnyConnect VPN, but when I connect I can not access the firewall... I can ping the address 10.4.11.2 but I can not connect... No idea what to do? It's the running configuration:

    : Saved

    :

    ASA 1.0000 Version 2

    !

    asa-oi hostname

    domain xx.xx.xx.xx

    activate 7Hb0WWuK1NRtRaEy encrypted password

    2KFQnbNIdI.2KYOU encrypted passwd

    names of

    1.1.1.1 DefaultGW-outside name description default gateway outside

    name 10.4.11.1 description DefaultGW - Default Gateway inside Inside

    !

    interface GigabitEthernet0/0

    nameif inside

    security-level 100

    IP 10.4.11.2 255.255.255.0

    !

    interface GigabitEthernet0/5

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/5.2000

    VLAN 2000

    nameif outside

    security-level 0

    IP 1.1.1.2 255.255.255.252

    !

    interface Management0/0

    Shutdown

    No nameif

    no level of security

    no ip address

    management only

    !

    boot system Disk0: / asa861-2-smp - k8.bin

    passive FTP mode

    clock timezone BRST-3

    clock summer-time recurring BRDT 2 Sun Oct 0:00 Sun Feb 3 0:00

    DNS lookup field inside

    DNS domain-lookup outside

    DNS server-group DefaultDNS

    1.1.1.1 server name

    1.1.1.2 server name

    domain xx.xx.xx.xx

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    network of the PoolAnyConnect object

    subnet 10.6.4.0 255.255.252.0

    access extensive list permits all ip a outside_in

    list of access by standard tunnel allowed 10.0.0.0 255.0.0.0

    pager lines 24

    Enable logging

    timestamp of the record

    exploitation forest-size of the buffer 1048576

    logging buffered information

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    mask 10.6.4.1 - 10.6.7.254 255.255.252.0 IP local pool PoolAnyConnect

    ICMP unreachable rate-limit 1 burst-size 1

    ICMP allow any inside

    ICMP allow all outside

    ASDM image disk0: / asdm - 66114.bin

    enable ASDM history

    ARP timeout 14400

    NAT (inside, outside) static source any any static destination PoolAnyConnect PoolAnyConnect non-proxy-arp-search to itinerary

    NAT (exterior, Interior) static source PoolAnyConnect PoolAnyConnect non-proxy-arp-search to itinerary

    Access-group outside_in in external interface

    Route outside 0.0.0.0 0.0.0.0 DefaultGW-outdoor 1

    Route inside 10.0.0.0 255.0.0.0 DefaultGW-Inside 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    AAA-Server LDAP protocol ldap

    AAA-server host 3.3.3.3 LDAP (inside)

    Timeout 5

    LDAP-base-dn o = xx

    LDAP-scope subtree

    LDAP-naming-attribute sAMAccountName

    novell server type

    identity of the user by default-domain LOCAL

    the ssh LOCAL console AAA authentication

    AAA authentication enable LOCAL console

    AAA authentication http LOCAL console

    Enable http server

    http 0.0.0.0 0.0.0.0 inside

    http 2.2.2.2 255.255.255.240 outside

    Telnet timeout 5

    SSH 0.0.0.0 0.0.0.0 inside

    SSH 2.2.2.2 255.255.255.240 outside

    SSH timeout 10

    Console timeout 10

    management-access inside

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    SSL cipher aes128-sha1 aes256-3des-sha1 sha1

    WebVPN

    allow outside

    AnyConnect essentials

    AnyConnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 1

    AnyConnect enable

    tunnel-group-list activate

    internal GrpPolicyAnyConnect group strategy

    attributes of Group Policy GrpPolicyAnyConnect

    value of server DNS 1.1.1.1 1.1.1.2

    VPN - 1000 simultaneous connections

    client ssl-VPN-tunnel-Protocol

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value in tunnel

    field default value xx.xx.xx.xx

    admin Dp4l7Cmqr7SMHl.l encrypted privilege 15 password username

    tunnel-group AnyConnect type remote access

    tunnel-group AnyConnect General attributes

    address pool PoolAnyConnect

    LDAP authentication group-server

    Group Policy - by default-GrpPolicyAnyConnect

    tunnel-group AnyConnect webvpn-attributes

    enable AnyConnect group-alias

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    inspect the ctiqbe

    inspect the http

    inspect the dcerpc

    inspect the dns

    inspect the icmp

    inspect the icmp error

    inspect the they

    inspect the amp-ipsec

    inspect the mgcp

    inspect the pptp

    inspect the snmp

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    Cryptochecksum:9399e42e238b5824eebaa115c93ad924

    : end

    BTW, I changed the NAT configuration many attempts the problem, this is the current...

    YPU need to allow your client VPN address pool (10.6.4.1 mask - 10.6.7.254 255.255.252.0) ssh and http from 'outside' access, which is where they come from. Add them to the:

    http 0.0.0.0 0.0.0.0 inside

    http 2.2.2.2 255.255.255.240 outside

    SSH 0.0.0.0 0.0.0.0 inside

    SSH 2.2.2.2 255.255.255.240 outside

  • SSL VPN and access to computers by computer name

    I have a SonicWall TZ 205 running SonicOS Enhanced 5.9.1.0 firmware - 22o. It seems that I have things to work except solve computers by computer name. Since the client SSL VPN Extender I can ping machines, I can reach their actions through \\192.168.1.12\myshare for example but not of \\mycomputername\myshare. I tried enabling NetBIOS settings but still does not. Thoughts please.

    Thank you

    OK so in this case you can resolve names of machine by completing the "Wins servers" section in the same pop-up down (if you have a wins server).

    Often the DNS servers are also the wins servers.

    If you don't have a wins server, then will not work without creating files on each machine that needs to resolve the name of the host computer.

    Technical Net Bios is not a routable protocol

  • I can't ping the interface inside of asa or telnet, when I came across the anyconnect vpn

    Hey Cisco net guys pro

    When I connect via anyconnect VPN to ASA 9.x, OS, I cannot ping inside
    the interface of asa or telnet, but I could ping at the interface of the router address
    ASA, the same two subnet

    Telnet 0.0.0.0 0.0.0.0 inside

    ICMP allow any insid

    Hi Ibrahim.

    Try 'inside access management' and let us know how it rates.

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

Maybe you are looking for