AnyConnect used to install Linux Ubuntu 13.04

Similar Questions

• How can I install Linux (Ubuntu or Kubuntu) and Windows on the same HARD drive?

  Hello world

  I have Toshiba L20-148 and I have the Toshiba product recovery DVD and I have the DVD Ubuntu

  I'm only able to install Linux or Windows XP Pro I have with the recovery DVD

  and the only way I know to install both together by installing linux and windows... but every time I try to install windows, then factory data recovery, it is just the whole HARD disk and install windows only...

  any help?

  Hello

  As mentioned that the Toshiba Recovery CD contains image and files during the installation of the OS on the HARD drive or the partition will be formatted. In this case all data will be deleted.
  Therefore, you must create a second partition for the use of Linux. But be careful. Linux uses the special file format. Partition Magic 8 contains and supported the creation of the Linux partitions.

  So if the new partition has been created, you can install the Linux

• G3 book Z 17: Z book G3 default to install linux (Fedora or Ubuntu)

  I got a new Z book G3 which came with pre-installed Windows 10. It has two discs. The first

  a rotation 1 TB drive and the other is a 256 GB SSD. Nothing is on the SSD.

  I want to create a dual-boot machine with Fedora Core 24 as the other OS.

  I resized the Windows partition using disk management, and which seems to have been successful, because I can still start Windows 10.

  I tried to install 22 CF and various versions of CF 24, as well as Ubuntu 16.04 without success. I use CF iso DVD in a DVD USB drive as the installation media.

  The installation of live meda CF disk will well up to a point. The last line printed on the screen of the installer is always:

  [OK] Has started the user for UID 1000 Manager

  Then it hangs forever.

  There are hundreds of lines before this line, but I can't understand how to capture them. The lines just above the failure are:

  [OK] Created user slice slice of liveuser

  From the user for UID 1000 Manager

  [OK] Started user liveuser Session 1

  I've got Secure Boot disabled and Legacy Boot enabled in BIOS.

  I also tried the installation option low-resolution graphic "Troubleshooting" of the iso FC DVDs. even result.

  I checked that the integrity of the iso installation using SHA256SUM.

  I had similar problems (not identical) with Ubuntu.

  Can someone has suggestions for how I install linux on this book Z?

  Chad

  I now 16.04 Ubuntu and CentOS 7 installed next to Windows 10.

  For other linux users who want to install write on computers HP Z book G3, here's a recap of what I've done for activating facilities:

  1. Ubuntu LTS 16.04. Installed using iso DVD via DVD USB drive. To install, enter the BIOS (hit escape repeatedly just after switching on). Choose settings BIOS or similar, set install from file, then find the correct file for the USB key.

  Ubuntu installation screen is normal and informs you how to access the Setup command line. Do it and add "nomodeset" to the command line, near "ro" and "calm". Proceed with the installation. Once installed, you need to change the set grub to include 'nomodeset' as a standard kernel option. Edit /etc/grub.d/10_linux and add "nomodeset" just before "ro". There is probably a better way.

  2 centOS-7. I ended up creating a USB bootable using dd and a downloaded iso file. See

  https://wiki.centos.org/HowTos/InstallFromUSBkey. During installation, you must enter the BIOS as in (1) above. Once you start from the file, you will be presented with a mutilated wishes installation screen. You can always change the Setup command line by using 'e '. Add "nomodeset" as before, then press F10. Everything should be normal after that, you will see the graphical installation of CentOS screens. Unlike Ubuntu, once you have installed CentOS, you don't need to edit the grub implemented. I have no idea why. (I'm in over my head here).

  3. fedora Core 24. Without success to report, but now that I have Ubuntu and CentOS, alongside W10, I have need to pursue this further at the moment. I suspect the steps in (2) above, or the like, will work. You will need to "fly blind" when editing of the Setup command line and can be change grub after installation.

• use to have xp. When xp stop working on my sony vaio model pcvrx540 a friend installed linux on it. can I do a fresh install of windows xp os House without cd. they have prod.key num.

  My sys. use to have xp home edition. When xp stop working on my sony vaio model pcvrx540 a friend installed linux on it. can I do a fresh install on the net with my oridgenal prod. key num? have no drive at all

  Hello

  There is no Net download that is not for the most hacked and / or infected with Malware

  Save your data and do a clean install of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Sony and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Linux installation could destroy this XP Reinstall option:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  It may be Ctrl + F11, F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  See you soon.

• Just reinstalled Windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognize my wireless network card.

  just reinstalled windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognizes my wlan card and does not allow me to scan for networks, absolutely no networks are displayed under networks. Help, please?

  original title: no wireless network

  That's your problem.  You will need to determine which makes your wireless card, go to their website and download the latest driver for 64-bit Windows 7 32 0r according to your material.  If its inbult to your computer, visit vender of your computer (HP, Toshiba, etc) for the correct driver.

  Jerry

• How can I automatically run anti-virus for files downloaded from Firefox on Linux (Ubuntu)?

  Double I start my computer with Windows 7 and sometimes download EXEs under Linux to use under Windows. I tried to use Fireclam but this addon freezes the browser for a few seconds each time a download is finished. I have also tried to play with automatic stop, but he couldn't understand. I wonder if there is another automated and faster way to scan downloaded files. I have Avast installed on Ubuntu already, is it possible that I can call from Firefox whenever a download is complete?

  EDIT: After some research more, I came across this:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=427258
  https://mail.Mozilla.org/pipermail/Firefox-dev/2013-August/000848.html

  I did not know that the feature has been removed in fact completely from Firefox last year, I guess that I was not paying much attention to what is happening in the history of downloads even in Windows. Looks like I'll have to analyze manually before using files anyway.

  Some antivirus programs will be automaticlly analyze downloaded files.
  Check the AV options If you need more information, we're here.

• Need help with installing Linux on Satellite Pro A300

  Hello

  I would like to install Linux on my laptop and am wondering which is the best distribution I can use and is it simple to follow guide to use so I'll get to the top and running with a dual boot with Microsoft Windows Vista?

  Please help because it is really important to me!

  Appreciate your help in advance.

  Thank you
  Bill.

  Hello

  To be honest I didn't install Linux on my laptop with Vista and XP.
  Sometimes, I use Linux Live distribution called Koppix, and I m satisfied!

  The devices have been recognized, and most of the drivers were included.

  Maybe it s an option for you too

  But Ubuntu might also be interesting for you.

  Check this box:
  http://www.Ubuntu.com/

• Satellite M70-164: heating under Linux Ubuntu problem

  Hello

  I use Linux Ubuntu Edgy under my laptop and when I play UT2004 I got a rate of about 90fps, but after 10 minutes of play fps drastically drop to 15/20 fps!

  I noticed that the pleasure never operate at full speed on linux! and to check I suspended my laptop and ubuntu has a bug that when you turn on your computer again, the fan will always run at full speed, so I went with the fan at full speed play UT again for about 1 h 30 and the FPS does not let it go this time, so I concluded that it is a heating problem.

  I installed omnibook but my phoenix bios do not support the fans... under windows, I have no problem.

  What should I do? Thanks :)

  I have no problem with Edgy on U200, with games such as Sauerbraten.
  Fan is really speed up when necessary.

  Hope you will solve your problem.

• How can I install Linux or Win7 on my PC of h8-1534 HP ENVY?

  Hi all

  I try to install Linux or Win7 in my office h8-1534, because I really don't like Windows 8 System. I was working on this for the whole weekend, but I failed.

  By installing the Linux system, I followed the instructions step by step:

  http://www.everydaylinuxuser.com/2013/09/install-Ubuntu-Linux-alongside-Windows.html

  I tried four editions of the Linux operating system: Ubuntu 12.04, 14.04 and Mint mate 13 and 16. All have failed to find a partition, the partition list is empty, as shown in the following image:

  

  While a successful installation should show this: (I have captured this image from the link above)

  I think that this may be because I not create a partition for Linux properly, but I created a partition unallocated in the Windows8 OS by using the disk management tool.

  By installing the OS Windows7, I followed the solution in this link:

  http://h30434.www3.HP.com/T5/desktop-hardware/need-Win7-drivers-for-H8-1534/m-p/3070893#M70817

  However, the Setup program cannot find the drivers during the installation process. Actually I have downloaded all the drivers on the site and stored in a USB drive and specify where the installer should find the drivers but the installation program may not always understand these drivers.

  Can someone tell me what are the problems on my installation? Especially how to correctly install the Linux operating system in my PC H8-1534?  Thank you very much! I'm so disappointed now because I spend the whole weekend but still have no resolution.

  Thank you once again.

  Sincerely

  Xiankun

  Hi TheOldMan,

  Thank you very much, the parameter should be set as you say.

  As for the problem of the empty partition list, it must be resolved by typing "sudo dmraid-rE" in the Terminal. This need to run Linux on the compatibility mode, so we can run Terminal.

  The above method is described in the following link:

  http://AskUbuntu.com/questions/162631/Ubuntu-12-04-installer-does-not-recognize-drive-partitions

  Thanks again for your help

  Sincerely

  Xiankun

• T0Q96AA: Can I install a Ubuntu desktip 14.04.4 LTS for HP all-in-one-20-r212l (T0Q96AA)?

  Hi all

  Can I install a Ubuntu desktip 14.04.4 LTS for HP all-in-one-20-r212l (T0Q96AA)?  There was not a driver to ubuntu for this model.  Help, please.

  http://WWW8.HP.com/th/en/products/desktops/product-detail.html?OID=9329377

  Hello

  If you want to write this down and consider the long...  (it may be useful).

  https://wiki.debian.org/WiFi which has a list of wireless drivers.

  You can try typing

  aptitude install wireless-tools

  #############################

  https://help.Ubuntu.com/community/WifiDocs/WirelessCardsSupported

  To determine which wireless card/chipset you have, first of all determine whether or not he is separated in the computer. If it's a USB device separated, open a terminal and type the following command:

  lsusb

  lspci - v

  ############################

  NDISWRAPPER

  Many providers do not release the specifications of the equipment or provide a Linux driver for wireless network cards. This project implements Windows kernel API and API of NDIS (Network Driver Interface Specification) within the Linux kernel. A Windows driver for the wireless network card is then bound to this implementation, so that the driver is running in native mode, as if he were in Windows, without binary emulation.

  With ndiswrapper, most miniPCI (builtin), PCI, PCMCIA (Cardbus only) or USB wireless network cards work under Linux with x 86 or x 86-64. Although ndiswrapper is intended for wireless network cards, other devices are known to work: for example, the ethernet cards, USB to serial port devices, peripheral host of network telephone etc.

  This wiki is intended to provide a knowledge base for ndiswrapper.

• I would like to change my Windows XP to linux-ubuntu, how

  I would like to change my windows xp pro for linux-ubuntu how to please

  Format the hard drive and install Ubuntu.  (Though, if you have to ask, you aren't really ready, technically, to use any variety of Linux.)

• driver 64 bits for p513w on linux (ubuntu)

  Hi all

  I've recently updated my ubuntu to a 64-bit version, but now I can not install the printer driver, because it is 32-bit only.

  Anyone know:

  (1) the question of whether a 64-bit driver is developing

  (2) a work around? I was pulling the PPD for a 32-bit computer, but when using it on my new machine, she complains a 'filter program' which is obviously not installed.

  Any help is very appreciated!

  See you soon,.

  Joachim

  The problem with the driver provided by Dell Linux is due to two bugs in the packaging, which require command line to resolve. The first is located in the original installation script and has been known for some time. When you run the script, it creates a temporary directory for the installation files, and then generates an error. This is caused by a typo in the file /tmp/config/run.lua in - one instance of 'property' has an extra "h" which should be removed.

  When you try to run the dell-inkjet-09-driver-1.0-1.i386.deb closed, another error appears referring to a fake blank line in the description section of the control of the deb file. This requires unpacking the deb in a new directory, the removal of the original deb, edit the blank line in the control file and recreate the deb. The revised deb will install the printer driver. I used it to install (K) ubuntu 13.10 and 14.04 and Mint 16 and 17, although you will need to open the cups (localhost:631 in a browser) to configure the printer instead of the system settings (the latter seems to offer the backend wrong - CUPS backend configuration select #1).

• WebWorks - UI - cannot connect [Linux Ubuntu (14.04)]

  I just installed on Ubuntu 14.04 WebWorks, but when I try to start the user interface (either through the Terminal (. / start-ui) or by clicking on the shortcut) I get the error:

  "An error occurred when starting the server: EADDRNOTAVAIL" and the browser page (http://localhost:3123) displays "Unable to connect" message.)

  All my research gave no results this issue so far, and I'd appreciate any help .

  I think it is worth noting that local port on my machine range is 32768 61000; I don't know if this might be irrelevant.

  Thank you

  EDIT:

  Change to 1024-65000 local port range does not solve the problem.

  Finished with a fresh install of Ubuntu 14.04 on a new virtual machine.

  Problem has been resolved. I guess the problem was one of the following:

  I was using Firefox, but the supported Linux browsers are Chrome and chrome; However, with the new facility, WebWorks UI works well on Firefox as well.

  I was using the 64-bit version of WebWorks. for the new installation, I used the 32-bit version (although all my browsers are 64-bit).

  I had used the previous host for web development projects, and it has been configured as LAMP server. I'm guessing maybe service web server Apache has been somehow interfere with ports (not sure).

  In any case, I'm fixed now

• How can you co install Linux OS on windows 7 OS

  Hello, I would like to know who can solve my problem. I'm a newbie in the world of the internet and computers. I want to know is how can I install my Linux OS that I downloaded from the Ubuntu side by side with windows 7 OS. I burned the Linux on a CD and its ready to be used. My windows 7 is already installed. And I don't think I need to say more, but if you want to know more ask away if you please. Thank you

  Hello

  You are trying to install Linux alongside Windows 7, recommend that you ask your question here in the Ubuntu Forums: http://ubuntuforums.org/forumdisplay.php?f=331&s=841a1be22cfa232d3f5c03620ac66194

  Thank you.

• How to delete windows and install linux?

  I couldn't use my Windows 7 system more because spyware / adware kept interrupting me, and I couldn't remove it without having to pay $100 to upgrade the antivirus and spyware, so I decided to install Linux instead. How can I delete my system Windows and install Linux Debian?

  Download DBAN (http://www.dban.org/) and won't burn it to a blank CD/DVD using ImgBurn (http://www.imgburn.com/) (in XP/Vista), no additional software required for Windows 7 or well make a USB bootable with Universal USB Installer (http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/)

  Insert this device and enter the BIOs setup in the setup of the BIOs (F2 on the screen of the Bios Dell, a different key to the non-vallons), disable the card readers THAT DBAN otherwise does not quite. Starting the device (hold F12 for a Dell one for a non-Dell BIOs screen and then select boot from CD/DVD or USB respectively). Follow the instructions on the screen to eliminate completely all the data on your hard drive. Do this before installing Windows. Once it is a complete restart as a guest and then power down. When switching on maintain F2 to enter the BIOs setup, and then select the card reader.

  This will have wiped your hard drives correctly.

  Then install UBUNTU or similar do this by downloading their recent .iso and make a bootable USB drive or DVD and boot from it (F12 on the screen of the BIOs Dell or similar for another Dell) - follow the instructions on the screen and see if you like. http://www.Ubuntu.com/

  You can also reinstall Windows 7 with latest Service Packs, more recent definitions of Microsoft Security Essentials & Microsoft Security Essentials, a decent free firewall like Sphinx Windows 7 Firewall Control and also Malwarebytes' Antimalware. A guide based on Dell, including links to download may be found here: http://en.community.dell.com/support-forums/software-os/w/microsoft_os/1434.aspx