AnyConnect using IKEV2 that allows access to the provider

Similar Questions

• Cannot use applications that need access to the internet

  I have problems with a number of applications on my Vista system.  All worked well until a few days ago (I ran the Symantec Conficker and Msft Malware tools so am sure it isn't the Conficker virus).  I am connected to the internet and can go to websites via IE.  However, applications that require access to the Internet are faulty.  It started with Windows Live Messenger, which would not start (error message has been that there was a problem).  After much effort I uninstalled but impossible to reinstall as the installer does not due to "not connected to the internet.  Another application shows an error 80072efd - lack of connection.  I can't configure Norton due to the lack of ability to connect to services.  Any ideas?  Thanks in advance...

  Hi DebAlex,

  Is the name of the application Python ring a Bell to you? It is a programming language and PyWin32 is an extension for it.  Please do a search on your computer (include files and hidden folders) for the file name pythonw.exe and pywin32.
   
  Depend on whether you use on your computer or not Python, you might want to try find it in Control Panel--> programs and features and remove it from the list if you use the program.

  If you do not use the program, rename the folder these files are locate in (if you can find using the search).  Other people with the same error were able to fix this way.

  Let us know if this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I recently purchased Photoshop elements 12 and the system is to say that the Redemption Code is no longer active.  How can I get a new code that allows access to the software?

  I recently purchased Photoshop elements 12 and the system tells me that the Redemption Code is no longer active.

  How can I get a new Code number that will allow met to access the software?

  you need your serial number.  you used your number of redemption to redeem your serial number.

  If you don't know your serial number, check the account used to purchase or register your PES 12, Adobe ID

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I hav

  I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".

  Interestingly, if I copy and paste your images into a new doc 2 points scored.

  I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.

• Allow access to the USB Reader under account 'user '.

  Hello world

  Need help to allow access to the usb ports so that users can use a card reader to download stuff on a web application, we have.

  The great way would be able to push on HP device Manager (I v4.5) and Thin Clients are T610 running WES7

  Any help is appreciated.

  See you soon,.

  The local user account is configured to restrict access to the Z:\ only through NoDrives policy.  See http://technet.microsoft.com/en-us/library/cc938267.aspx for more details.

  To make life easier, there are calculators that you can use to determine what should be this entry of 32 bits, based on drive letters you want hidden.  An example is http://www.wisdombay.com/hidedrive/index.php.  The default value for Z:\ is only 0x01ffffff (33554431).

• Photo Gallery can't open the photo because you are not allowed access to the location of the file

  Photo Gallery can't open the photo because you are not allowed access to the location of the file some of the image are open

  Click on the folder and change your permissions for it and all subfolders and files all rights and if necessary take hand the case (and maybe the parent folder or even its parent - and all of the subfolders and files) until you have the permission you need.  Here are the general procedures to help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• SUN grant writing back and allows access to the GL

  Hello
  
  SUN grant writing back and allows access to the GL
  
  Sravan

  If ODI can do it then you can assume generally that SUN will not.
  It seems that everyone forgets to press the useful buttons, correct these days.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• access to the default in IIS6 and IIS7 Web site, how we configure IIS6 on windows 7 to allow access to the default Web site

  How to configure IIS6 on windows 7 to allow access to the default Web site or there at - there someone out there who can put up my computer at a reasonable rate of legend

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Allow access to the internal area

  Hello

  I'm a consultant that I need to allow access through our PIX. We have a box on our internal network, it needs to be able to configure. I was thinking something like:

  access-list app tcp host 192.178.16.6 host 201.126.22.54 eq 2301

  Access-group app in external interface

  static (inside, outside) tcp 201.126.22.54 10.1.1.112 2301 2301 netmask 255.255.255.255

  consultants address is 192.178.16.6

  Our external address is 201.126.22.54

  Our internal address is 10.1.1.112

  necessary port is 2301

  It looks all right? I'm not exactly sure how would he initially 'connect' to our network... I would think he would use our IP external, correct?

  Looks good, here you have another model.

  acl_out list allowed access host tcp SRC-Public host IP YourPublic eq 2301

  Access-group acl_out in interface outside

  static (inside, outside) 2301 YourPublic-IP IP local 2301 netmask 255.255.255.255 tcp 0 0

  You may need to run a =

  clear xlate

  If you have changed or have changed the static method. Please note that this will reset all the session.

  sincerely

  Patrick

• Windows 7 stops allowing access to the shares.

  I have a Windows 7 Pro 64-bit installed.  I have a computer repair shop and use this computer as a file server. I have a share of "Programs" created for other computers can connect and load updates, etc.  I think I created the part successfully but a few problems.  I can connect on the share via any OS such as XP, Vista, 98, etc. BUT other Windows 7 PCs are still able to connect.  For some reason but all of a sudden the Windows 7 PC will stop allowing access.  I can restart the PC Windows 7 and everything starts to work properly again.  I can't understand this because all computers are able to independently connect BONES, then after a while, it will start to deny access to the OS legacy until a reboot.  Can anyone help?

  Hi danieljh,.

  My first suggestion would be to update the network cards.

  If that makes no difference then perform a clean boot and see if any third-party application interferes with performance on Windows 7.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.
    
  1. click on start, type msconfig in the search box and press ENTER.
    
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/929135

  In addition, see the section on how to restore your computer to a Normal startup mode.

  Let us know for further assistance

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Change security groups are allowed access to the project

  Hello

  We have a project of the Disqualification in our production environment that allows only administrators to view/access it. We now allow access of data analysts. I know that we could just edit the prod Manager access security group, but due to some storage issues related to the postgres DB that uses a Disqualification, we clearly downwards and the redeployment of the Disqualification (and the project) on the prod server every two weeks. This means having to manually modify access groups after each reinstall. To save the duty of our many stop to promote a new project dxi file, is there something that can be added to all config files to allow data analysts access the project? Editing a config in our backup file would be very fast and simple.

  See you soon

  Jon

  Unfortunately, no, no.

  I can't imagine a scenario that would require the Disqualification to redeploy completely. If there is a problem of PostgreSQL, the worst case would be a fall and recreate the Pb of results, I would have thought.

• ESXi 4.0.0 not allowing access to the total capacity of the RAID (FREE)

  Hello everyone.  I'm new to ESXi, having installed just 4.0.0 on a custom server.  The hardware of the server is:

  Motherboard ASUS Z8PE-D12

  Asus PIKE 1068E SAS/SATA card

  5 x Seagate 1.5 TB 7200 RPM SATA drives

  2 x Xeon E5630 2.53 GH (Quad Core)

  etc...

  Asus PIKE 1068E map uses FREE chipset to provide SAS/SATA RAID0/1/1E features.

  I have configured three hard drives in an array of size 2.0 TB RAID1E using the accessible FREE configuration utility for the system to start.

  I installed ESXi on another hard drive that is not part of a RAID array.

  AprΦs dΘmarrage ESXi, I launch the vSphere Client and connect to the server.  I'm sailing on the Configuration - & gt; Storage section, then click Add storage... option.

  I selected disk/LUN, then it lists the available devices.  I am able to see the FREE Serial Attached SCSI disk with a capacity of 2.05 to.  Then, I chose this drive to create a data store.

  On the next screen, it shows the FREE Serial Attached SCSI disk device (and a very long identification number).  Ability displays 2.05 TB but 'Available' only 47,47 GB.  He also says "the hard drive is empty. (SEE SCREENSHOT)

  "I can't find a way to increase the value of" available "to 2.05, which is the capacity of the disk. 47,47 Go is nowhere near capacity.  The program only allows me to create a store of data with 47,47 GB of space.

  Anyone have any suggestions for access to the full size of this volume to add to ESXi as a data store?

  It is not a driver problem, because the volume is properly recognized and the capacity is displayed correctly.  Not sure why it shows that 47,47 GB available.

  ALL SUGGESTIONS GREATLY APPRECIATED!

  Thank you!

  I've attached a screenshot of the management screen showing the capacity and space available:

  Basically, the size of your drive is greater than 2 TB, you can only use the left in space after 2 TB to be 2.05 TB, so it would be 47 about 50 GB seems straight, you disc 2 to - 512 b, must then he can use everything