SUN grant writing back and allows access to the GL

Similar Questions

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• access to the default in IIS6 and IIS7 Web site, how we configure IIS6 on windows 7 to allow access to the default Web site

  How to configure IIS6 on windows 7 to allow access to the default Web site or there at - there someone out there who can put up my computer at a reasonable rate of legend

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Photo Gallery can't open the photo because you are not allowed access to the location of the file

  Photo Gallery can't open the photo because you are not allowed access to the location of the file some of the image are open

  Click on the folder and change your permissions for it and all subfolders and files all rights and if necessary take hand the case (and maybe the parent folder or even its parent - and all of the subfolders and files) until you have the permission you need.  Here are the general procedures to help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Allow access to the USB Reader under account 'user '.

  Hello world

  Need help to allow access to the usb ports so that users can use a card reader to download stuff on a web application, we have.

  The great way would be able to push on HP device Manager (I v4.5) and Thin Clients are T610 running WES7

  Any help is appreciated.

  See you soon,.

  The local user account is configured to restrict access to the Z:\ only through NoDrives policy.  See http://technet.microsoft.com/en-us/library/cc938267.aspx for more details.

  To make life easier, there are calculators that you can use to determine what should be this entry of 32 bits, based on drive letters you want hidden.  An example is http://www.wisdombay.com/hidedrive/index.php.  The default value for Z:\ is only 0x01ffffff (33554431).

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• Termination of the client PIX VPN and Internet access from the same interface

  Hello

  VPN remote users connect to PIX (7.2) outside interface, but need to have these clients to access the Internet through the PIX outside interface as well. Need this because PIX IPs is registered and allowed access to some electronic libraries. One way would be to set up a proxy within the network and vpn users have access to the Internet through the proxy, but can it be done without proxy?

  Yes, public internet on a stick

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• Can you is more middle - click on the buttons back and forward to open the most recent last/next page as a new tab?

  I use Firefox 26, and I remember at some point in the past you could middle - click on the buttons back and forward to open the most recent last/next page as a new tab. Now, it does not work. I have not changed anything else on Firefox I know works, so was it gradually as keyword.url or is this something else?

  ... OK, this is weird. I restarted Firefox in safe mode and the reworked for/back Middle-click, so I thought it was one of my modules. Yet once, I opened Firefox in normal mode... and Middle-click works.

  I have no idea.

• Microsoft 4000 ergonomic, which are back and buttons just below the space bar for forward?

  Original title: tne on Microsoft 4000 ergonomic

  On the Microsoft 4000 ergonomic keyboard. What are the buttons back and next just below the bar of distinguished? I've never seen them do anything when I press them. And there is no link of programming the software set up for them.

  I just had the Microsoft 4000 ergonomic keyboard of THIS support in my office, and the back and the front keys work exactly as 'return' and arrows 'before' in my browser (Firefox).  I didn't do anything - program may be the game of the previous user upwards - but for me they work for the web back and forth, not navigation problem.

• How do I get my apps to allow access to the camera and photi

  • MY iPhone 5s was software updated this morning and found out my snapchat and Kijiji, do not have access to my camera or the photos
  • I have reset my attribution and privacy, it's still doesn't work do not
  • AAND also when I go into settings > privacy > camera it says ' apps that have requested access to the camera will appear here "(mais là pas appers ci-dessous) it's the same for photos under the heading Privacy"»
  • someone also suggested in general > restrictions but do not know my password so I can't try it

  Does anyone have any other suggestions

  Hello

  Delete the apps that you have problems with then download again.

  Open the app, then it should be on the access to the camera.

  See you soon

  Brian

• EA2700 and remote access to the DVR

  Does anyone have a solution for the router settings allow access remotely
  Recorders digital windows and Linux?

  Justme2012 wrote:
  OK, so now I activated Remoting but the remote routers
  Management port is different from the default port on the DVR.

  The ports must be different. In this way it will not create a conflict. No two devices must use the same port numbers. Once again as what has been mentioned in this thread, you must use the port number provided by the manufacturer for the DVR and just leave the router uses it is default remote management port. This is to ensure that there will be no conflict. To check if the ports were opened successfully you can do an audit of port. You can use this site to check it out. http://ping.EU/port-chk/

• Dell Powerconnect 3548P - a reference not rattling, or allowing access to the web console

  Hello

  I wonder why we are able to access our PoE switch through the web console http, I can connect via the serial port and the Dell Setup Wizard, we have all the information and our ip address for that switch to 10.0.3.192 255.255.255.0 with a default gateway of 10.0.3.1.

  So if trying to ping so still times out, and if you connect to it and change the pc ipv4 parameter to point to him, he will not allow access via browser.

  Any suggestion or help would be greatly appreciated, thank you.

  I've reconfigured everything ManageEngine OpUtils connection to stack Dell via SNMP v2c and the issue seems to be fixed: stack of Dell was to be online from 4 pm and noting happened during the many analyses of OpUtils SNMP. I think that the problem is resolved.

  For your convenience, Dell battery of newspapers (RAM and file those with the maximum detail level) show not record SNMP loss or drop.

  Thanks for your suggestions.

  Marco Dodi

• Windows 7 stops allowing access to the shares.

  I have a Windows 7 Pro 64-bit installed.  I have a computer repair shop and use this computer as a file server. I have a share of "Programs" created for other computers can connect and load updates, etc.  I think I created the part successfully but a few problems.  I can connect on the share via any OS such as XP, Vista, 98, etc. BUT other Windows 7 PCs are still able to connect.  For some reason but all of a sudden the Windows 7 PC will stop allowing access.  I can restart the PC Windows 7 and everything starts to work properly again.  I can't understand this because all computers are able to independently connect BONES, then after a while, it will start to deny access to the OS legacy until a reboot.  Can anyone help?

  Hi danieljh,.

  My first suggestion would be to update the network cards.

  If that makes no difference then perform a clean boot and see if any third-party application interferes with performance on Windows 7.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.
    
  1. click on start, type msconfig in the search box and press ENTER.
    
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/929135

  In addition, see the section on how to restore your computer to a Normal startup mode.

  Let us know for further assistance

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Filtering of VPN and local access to the remote site

  Hello

  I set up vpn, filtering on all my VPN l2l. I have limited access to remote resources at the local level to the specified ports. It works perfectly.

  But I want to have as full access from local to remote networks (but still retain the remote access to the local level). VPN filter now works as I have two-way with a simple ACL. So is it possible to open all the traffic from the local to remote and all by limiting the remote to the local traffic?

  ASA 5520 8.4 (3)

  Thanks in advance

  Tomasz Mowinski

  Hello

  Well let's say you have a filtering ACL rule when you allow http local network traffic to the remote host

  LAN: 10.10.10.0/24

  remote host: 192.168.10.10/32

  The filter ACL rule is the following:

  FILTER-ACL access-list permit tcp host 192.168.10.10 eq 80 10.10.10.0 255.255.255.0

  I think that this ACL rule would mean also that until the remote host has been using source port TCP/80, it may access any port on any host tcp in your local network as long as it uses the source TCP/80 port.

  I guess you could add a few ranges of ports or even service groups of objects to the ACL rules so that not all well-known ports would be accessible on the LAN. But I guess that could complicate the configurations.

  We are usually management customer and completely different in ASA L2L VPN that allows us to all traffic on another filtering device and do not work in this kind of problems. But of course there are some of the situations/networks where this is not only possible and it is not a feasible option for some because of the costs of having an ASA extra.

  Please indicate if you have found any useful information

  -Jouni