Anyone got the server MBean autonomous consistency running on the http protocol

Similar Questions

• I want to uninstall Bethesda game "Seadogs" uninstall box saying 'Are you sure () to unintall' Guard come little matter how many times I click Yes. Anyone got the answer on Vista.

  I want to uninstall Bethesda game "Seadogs" uninstall box saying "Are you sure () to uninstall" warning come shortly matter how many times I click Yes...  Anyone got the answer on the Vista system.  I want to get it out of my computor.

  Hi johndelury,

  I see that Seadogs game is not compatible with Windows Vista, which could be the cause of this problem. See the link below

  http://support.bethsoft.com/eng/platformlist.asp?SID=014429110505065049014055&PID=1077&PNM=sea+dogs

  Method 1: uninstall files could be corrupted, re - install (it replaces the corrupted uninstall files) the game, and then try to uninstall.

  Method 2:  First, contact the manufacturer game for any program to uninstall to uninstall the game completely from the computer.

  Method 3: You can follow the steps mentioned in the article below to manually remove the game

  How to manually remove programs from the add tool / remove programs
  http://support.Microsoft.com/kb/314481

  (Article applies to Windows XP, similar steps valid for Windows Vista)

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• How to prevent the FF loading all Web sites using the HTTPS protocol

  FF is trying to load initially all Web sites using the HTTPS protocol, including of mozilla.org. Then I get the error of no reliable connection of course. Mozilla .org is the "invalid security certificate" and "the issuer of the certificate is unknown." I tried to delete the file cert8.db as suggested elsewhere but that did not help. If there is an option for this somewhere, I can't find it. I have the latest version of FF and Win7 running. Thanks for the help.

  There must be some sites that are still using a secure connection, as http://www.amazon.com/. If even a link to Amazon is redirected, you can check if you have an extension like HTTPS Everywhere.

  For Mozilla sites, Yes, you establish a secure connection.

  But you shouldn't get certificate errors! When you get this for virtually all secure sites, the problem is usually as follows:

  (1) error of date, time, or time zone who throw checks validity of the certificates of your system. Sometimes allowing to use a timesource on the internet, the computers can introduce this problem.

  (2) not be set up to work with your security software that intercepts and filter secure connections from Firefox. Products with this feature include Avast, BitDefender, ESET, Kaspersky; AVG has a shield search function which can cause this error on search sites.

  (3) malicious software on your system for the interception of secure connections.

  So... who is?

  If you have any of these specific security products, which would be the first thing to check. We might be able to help with specific next steps based on what you have if you tell us.

  Alternatively, you can examine the certificate to which Firefox is opposed to see if the issuer information pointing to the culprit. Take for example my test page:

  https://jeffersonscher.com/RES/jstest.php

  You should see a section "I understand the risks" in the page. If you expand this section, you will find a button Add Exception. You don't need to complete the process of adding an exception (I suggest not adding one until we know that it is not a problem of malware), but you can use the dialog box to display the information that makes Firefox suspicious.

  Click Add an Exception, and then view. If the view is not enabled, try first the button get certificate. Then in the certificate Viewer, refer to the section "issued by". What do you find here, or under the hierarchy of certificates? I have attached a screenshot for comparison of screen.

• Publish live on FMS on the HTTP protocol

  Hello

  I want to use the custom encoder to publish live steamers on a FMS4.5 Server?

  Is it possible to connect the encoder and the server FMS4.5 on the HTTP protocol?

  I read in other articles THAT GFFE can connect to FMS on RTMP protocol.

  Very urgent.

  Thank you

  POOJA jegou

  True... Encoder and FMS logging on rtmp and its variant...

• the "http" Protocol is not registered program

  edited the title was 'Sir'>

  Windows 7 for example, I try to go to gmail and I get this: problem with shortcut.  Unable to open this Internet shortcut.  The "http" Protocol doesn't have a registered program.  Gift; t know where it comes from.  How to fix?

  Your Internet shortcut is corrupt.  You can edit and fix, but it is probably simplest to just delete the shortcut on your desktop and create a new.

  For example, to access Gmail, open Internet Explorer and go to the Gmail login page (click on--> https://accounts.google.com/ServiceLogin?service=mail&continue=https://mail.google.com/mail/)

  Click the file menu, and then click on send, and then click shortcut on the desktop.  Click Yes in the box that opens.

  If you don't see the file menu, right-click in the title (top) bar, then click on the left 'menu bar '.

  If this does not help, then

  Set Internet Explorer as default browser-

  1. Click Start and type default programs in the search box
  2. Click on the link that is
  3. Click on the "Set your default programs" link
  4. Select Internet Explorer from the list on the left and then click on "Set this program as default"
  5. Click OK

• Does anyone got the HP Envy X 2 to work properly with the 8.1 update?

  I had no chance of finding help here on the phone with HP, or elsewhere online. I bought the X want February 2, 2013 local Office Depot. He has never run because of the GET go. Often freezing, never close properly unless I press the button for 5 seconds after clicking Close in power options. Sometimes, depending on the startup error messages saying something about the power of the core or something. I've never had to do no work around to use a computer.

  Has anyone got their desire x 2 PC 11 - g010nr to run the free error in Windows 8, it was designed to run under the operating system?

  If somebody has got an upgrade to Windows 8.1 and work still?

  HP support people, if you want to help save your breath. Go to the drivers of my model for 8 and 8.1. Is there no update driver dated 2014 and it still won't work. I bought my wife a Tablet 11.6 "Lenovo Lynx who can also use their keyboard dock which is optional. I didn't need to.  Lenovo posted 8.1 Windows drivers dated April 2014 and I updated his tablet with the same Atom CPU/graphics SoC as my x 2. I bought a Dell coming Pro 11 and it worked very well with 8.0 and even better with 8.1. Dell has prepared new pilots in a roll on their support pages.

  HP? No, no new drivers since almost a year ago. HP has abandoned this design hybrid great many too fast. So they come with HP Omni 10 with the same processor as my coming 11 Pro, quad core Atom Z3770, and the local Office Depot can not get their demo to run long enough without lock up and require a multi step reset to work again. My Dell and Lenovos designed for 8 has raced the 8 large, then ran 8.1 grand. I am not inexperienced in the tablets and the upgrade.

  I would just take the brain of one who got their 2 x to run the 8.1 and know how they did it.

  The drivers I used are located by scrolling to the bottm of THIS page, and then in the column of customer support, that the first category is to download drivers.

  That is, it becomes a bit difficult but must be specific with this pc, you have, but just follow the prompts and see if the best drivers are available for what you have.

  Because it worked for me AFTER that I upgraded to W8.1, it is preferable that you update first, then update the drivers.

• When I click on a desktop icon, I get a message "cannot open this shortcut Internet. The "https" Protocol does not have a registered program"

  This occurred after a new graphics card to distance was downloaded from Dell technical support

  The 'Default programs' tool has solved the problem. See:

  How to fix error of HTTP protocol does not have a program recorded at the opening of the Internet shortcuts:
  http://www.Winhelponline.com/blog/fix-error-Protocol-HTTP-registered-program-Internet-shortcuts/

  This solves https thus the protocol settings.

• What is ORA-29049: unknown record when using UTL_HTTP.begin_request with the HTTPS protocol?

  Hi, here is my question:

  The application context:
  Oracle 10.2.0.4.0
  Operating system: AIX Version 5.3

  A stored procedure executes queries on the web in order to call a Webmodele.
  The used protocol is httpS.
  A certificate has been defined with the Oracle Wallet (orapki) utility

  Problem:
  For several days, making the procedure call webservice no longer works.
  The package has been changed on the database, no patch has been applied on the machine.

  The call to the procedure of utl_http.begin_request with the HTTPS url returns the following error:
  ORA-29049: unknown record
  ORA-06512: at "SYS." UTL_HTTP", line 1027
  ORA-06512: at line 16 level

  A small piece of code/oog is attached, see photo log_sql_ws_call.jpg

  Question

  Can you explain to me the meaning of the error ORA-29049, what may be the cause of this unexpected error and most importantly, how to fix?

  
  Thank you for your help.

  Finally, it happends only a few days before the described error (ORA-29049), SSL v2 has been disabled on the target domain (SSL v3 has been disbled 1 year ago already).

  The reactivation of SSL v2 solved the ORA-29049.

  Now, I'm dealing with the ORA-12537: TNS:connection closed.

• Has anyone got the upgrade of GPU for H8-1234 with motherboard HP M3970AM HP (Angelica2)?

  I improved my diet for a Corsair CX series CX500M 500W ATX 80 Plus Bronze modular power supply 12V successfully and I want to assure you that I have buy a compatible GPU for the motherboard.

  If I go to http://www.pc-specs.com/mobo/HP/HP_M3970AM-HP (Angelica2) _ / 2042 and click on compatible GPU it lists AMD and Nvidia cards.

  The series of HD AMD goes up to the HD6000 series and does not list any HD 7000 series.

  The only Nvidia 600 series which is decent is the GeForce GTX-660-670-680 or 690.

  The site also shows (these graphics cards have an appropriate interface to work with and integrate into the HP M3970AM - (Angelica2). Because this motherboard does not have a GPU chip on board, we have also limited GPU integrated only to those which are integrated to die of a CPU.)

  Cards GTX listed are all much more expensive than 650 Ti DirectCU OC Boost 1085 MHZ 2 GHz 6.0 GB GDDR5 2xDVI card PCI-E HDMI DP that is not listed or even GTX550 TI, which is not listed

  The Amd HD listed series cards are unavailable or more expensive than most of the HD 7000 series.

  Has anyone successfully installed a card $ 100 from low to medium priced which is a significant improvement on the hd 7450? If you could please let me know what graphics card you purchaced.

  Thank you

  Gbrown13, welcome to the forum.

  The limiting factor for the video card upgrade is the power supply unit (PSU).  It is 300W.  Intermediate level maps latest require at least 400W to work properly.  7450 HD comes with the computer has been designed for HP operate with OEM PSU.  A detail 7450 HD very probably would not work.  In addition, you should limit the length of the video card to no more than 9 ".  This ensures that it fits in the space provided.  The majority of the double cards are 1.5 "wide.  These are normally without any problems.

  I hesitate to recommend a video card on the grounds that it will be much better than an existing map.  It is difficult to say that this is the case.  Here is a map which might work for you, with an upgrade of the power supply.  Read the reviews to see what users have to say about it.

  If your problem is solved, please click "accept as a Solution.

• Anyone got the DVD to the UEFI boot?

  I used the normal Wizard to download and allowed him to install supports for the upgrade of Windows 8.  The flash drive seems to work fine and boots by using UEFI.  The DVD does not work...!

  Anyone find this is the case?  Surely Microsoft would not put in place the DVD option to not allow to boot in a UEFI configuration...

  I looked quickly the directory structure and it seems to be OK, so I have to assume that there is something on the way is built the .iso image file, if it is a problem of Microsoft.

  Indeed, ISO created by the Wizard Windows 8 upgrade does not boot UEFI support. The files in the ISO are beautiful (file \efi), but the boot images are broken. To start in UEFI since CD/DVD mode, it must be a special boot image that allows to start the EFI boot in \efi\boot. ISO created by the wizard upgrade of Windows 8 has only the boot image standard for the normal BIOS boot mode, while the preview of Windows 8 ISO has two boot images, BIOS and UEFI mode.

  The solution is to build a new ISO file, with two boot images. Boot images are available in the ISO file system. I have sucessfully built ISO with the Microsoft tool "oscdimg. To obtain the tool, or download the evaluation of Windows and the Deployment Kit (ADK) from http://www.microsoft.com/en-us/download/details.aspx?id=30652 or download just the tool of http://blog.paulbetts.org/index.php/2011/09/17/converting-a-win8-install-directory-to-an-iso/
  In addition, mount the ISO file with a virtual DVD drive, or insert the DVD into a real DVD player. In the following example, it is assumed that the Windows 8 DVD is in drive g:
  Now, create the ISO fixed (including the UEFI boot image) with the command:
  Oscdimg.exe-o-u2-udfver102-bootdata:2#p0,e,bg:\boot\etfsboot.com#pEF,e,bg:\efi\microsoft\boot\efisys.bin g:\ d:\path\to\new\win8pro-uefi.iso m
  Burn the new ISO on a DVD file. I used InfraRecorder and boot from DVD in BIOS and UEFI mode worked well. Note: I have not tested a whole plant, but only until the first dialog box installation program.
  Have fun
  PS: Thanks to http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/15ac18b5-78c3-4cc0-a1f8-fa20233b86ad/ who told me http://support.microsoft.com/kb/947024/en-us

• Has anyone got the coding device?

  My motorcycle g 2nd generation crashes when you use this procedure:

  After you load a code PIN or password in settings, security, coding phone menu. After the restart is required code PIN or password. If you miss it identifies the password error or the PIN code and send to repeat the procedure. If you put the PIN code or the password, it will stay forever with black screen. The procedure to reset the phone, which means that you will lose all the data stored on the device must be done. I opened a complaint with the motorola but not answered me.

  Entries repeated invalid PIN 10 times will result in a reset of the data. It is normal for your device is blocked. If you are talking about another scenario capture video and download it here as a file or link via YouTube.

  Mark

  Forums Manager

• Has anyone got the Wake On Lan to work on desktop HPE h8-1110?

  I turned on WOL in the BIOS and the integrated Realtek Gigabit LAN adapter properties are set to wake up the PC.  Magic packets are enabled.  Under the system, Win7 Home Premium 64-bit.  PC is connected and APC UPS.

  Hi Frank,.

  You might want to look at this article on WOL MS and then this article.

  Recheck the WOL in the bios.  S5 must be enabled.

  How do you know if the magic packet is still trying your PC? Try this article and this article.

• My creative cloud hang on to 5%. anyone got the same situation?

  Try to update the creative cloud but hangs at 5%. I just try to download again, but still after crashes and sow a message with error 201;

  Uninstall Adobe Creative Cloud app using the uninstaller CC:

  https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* Milestone]

  Impossible to remove? Rename the folder Adobe Creative Cloud centenarians.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Restart the computer once.

  Step 5:

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Connect to CC - stuck on "Installing update..."

  Re: Update course Creative Cloud stuck at 5% since yesterday

  Concerning

  Stéphane

• Has anyone got the error after error Adobe statement: Mismatched start and called rollbackUserAction? (Action Import::import to generate the bitmap of the page to communicate WITH US)

  Help!  Full statement of the error:

  Adobe Muse CC has encountered an error and will now close.  Please report the last actions bit that you have taken to this error to the Adobe Muse CC team.

  Not match start and called rollbackUserAction? (Action Import::import to generate the bitmap of the page to communicate WITH US)

  Please send us the .muse file and the file MuseLog.txt to your Documents folder to [email protected]. Include a link to this thread for the context. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your email address in the body of the message back, given that not all services to include it in the invite sharing they send.) Thank you.

• How can I disable the 'security warning' - encrpted script message when I connect to a Web site using the https protocol?

  Whenever I log onto a Web site over https (including my site), I get this message:

  Although this page is encrypted, the information you entered will be sent over an unencrypted connection and could easily be read by a third party.
  Are you sure you want to continue to send this information? It is followed below with two boxes, "continue" and "Cancel".

  To connect to the Web site, I have to click "continue" whenever I connect to the Web site.
  HOW to DISABLE this message permanently?

  Firefox gives this error because the page is over HTTPS, but your form action is HTTP:

  <form action="http://eclipse69forum.com/index.php?app=core&module=global&section=login&do=process" method="post" id="login">
  

  You can change cela https?

  Edit: disabled the link