Anyone got the DVD to the UEFI boot?

Similar Questions

• Satellite Pro C50: Installation of Win 7 using the UEFI boot mode

  I want to install Windows 7 Pro 64 bit on Sat Pro C50 (downgrade if you like - comes with 8 win), but I want UEFI boot, with GPT partitioning.
  I'm happy wipe existing partitions if that solved the problem.

  I have disabled _have_ Secure Boot.
  Win 8 install DVD boot works;
  CSM boot and boot from Win 7 DVD works - but this is not what I want.
  Definition of return to the UEFI boot and install Win7 boot media - hangs on "Starting Windows" screen
  Media _is_ good, works well on the PC manufacturers.

  I'm not convinced that it is a problem of Microsoft.

  Hello

  On Toshiba laptops, where the UEFI BIOS is available, it of necessary to disable secure boot and change the boot to the CSM mode in order to boot from external sources and install systems other than Win 8 or 8.1 Win

  Of the workarounds in the internet described the installation of Windows 7 in UEFI mode but I doubt that this will be possible on Toshiba laptops because the BIOS is different and modified for each series of laptop.

• I want to uninstall Bethesda game "Seadogs" uninstall box saying 'Are you sure () to unintall' Guard come little matter how many times I click Yes. Anyone got the answer on Vista.

  I want to uninstall Bethesda game "Seadogs" uninstall box saying "Are you sure () to uninstall" warning come shortly matter how many times I click Yes...  Anyone got the answer on the Vista system.  I want to get it out of my computor.

  Hi johndelury,

  I see that Seadogs game is not compatible with Windows Vista, which could be the cause of this problem. See the link below

  http://support.bethsoft.com/eng/platformlist.asp?SID=014429110505065049014055&PID=1077&PNM=sea+dogs

  Method 1: uninstall files could be corrupted, re - install (it replaces the corrupted uninstall files) the game, and then try to uninstall.

  Method 2:  First, contact the manufacturer game for any program to uninstall to uninstall the game completely from the computer.

  Method 3: You can follow the steps mentioned in the article below to manually remove the game

  How to manually remove programs from the add tool / remove programs
  http://support.Microsoft.com/kb/314481

  (Article applies to Windows XP, similar steps valid for Windows Vista)

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Satellite C50 - B with Win 8.1 - PXE error is displayed using the UEFI boot mode

  I have a laptop of C50 - b under Win 8.1 and recently needed to boot from a USB stick so finally found the way to do it (missing the start of the first bios menu) and managed to do.

  My problem is same when I returned in the uefi and set the boot order local drive, cd, network, he asks every time that I want to start PXE IP4, IP6 then IP4 and IP6 again. I also disabled secure boot

  I think that a value is missing, when I went to the BIOS and return to the start of IEFU option, but where is the laptop get the setting to tell him to network/PXE boot when the bottom of the list and the wake we LAN is disabled.

  Exactly, secure boot must be enabled in order to boot from the internal HARD disk where the 8.1 for Windows has been installed.

  If you want to boot from external sources (IE USB flash memory stick) you will need to disable secure boot.

• Does anyone got the HP Envy X 2 to work properly with the 8.1 update?

  I had no chance of finding help here on the phone with HP, or elsewhere online. I bought the X want February 2, 2013 local Office Depot. He has never run because of the GET go. Often freezing, never close properly unless I press the button for 5 seconds after clicking Close in power options. Sometimes, depending on the startup error messages saying something about the power of the core or something. I've never had to do no work around to use a computer.

  Has anyone got their desire x 2 PC 11 - g010nr to run the free error in Windows 8, it was designed to run under the operating system?

  If somebody has got an upgrade to Windows 8.1 and work still?

  HP support people, if you want to help save your breath. Go to the drivers of my model for 8 and 8.1. Is there no update driver dated 2014 and it still won't work. I bought my wife a Tablet 11.6 "Lenovo Lynx who can also use their keyboard dock which is optional. I didn't need to.  Lenovo posted 8.1 Windows drivers dated April 2014 and I updated his tablet with the same Atom CPU/graphics SoC as my x 2. I bought a Dell coming Pro 11 and it worked very well with 8.0 and even better with 8.1. Dell has prepared new pilots in a roll on their support pages.

  HP? No, no new drivers since almost a year ago. HP has abandoned this design hybrid great many too fast. So they come with HP Omni 10 with the same processor as my coming 11 Pro, quad core Atom Z3770, and the local Office Depot can not get their demo to run long enough without lock up and require a multi step reset to work again. My Dell and Lenovos designed for 8 has raced the 8 large, then ran 8.1 grand. I am not inexperienced in the tablets and the upgrade.

  I would just take the brain of one who got their 2 x to run the 8.1 and know how they did it.

  The drivers I used are located by scrolling to the bottm of THIS page, and then in the column of customer support, that the first category is to download drivers.

  That is, it becomes a bit difficult but must be specific with this pc, you have, but just follow the prompts and see if the best drivers are available for what you have.

  Because it worked for me AFTER that I upgraded to W8.1, it is preferable that you update first, then update the drivers.

• ACER ASPIRE E5-511-ADD DEVICE USING THE UEFI BOOT.

  Hello. I bought a laptop Acer Aspire with Linux preinstalled E5-511. I want to install windows 8.1.

  I created with Rufus TPG bootable USB flash with win8.1 image. UEFI mode the laptop does not recognize the USB, I have turned off secure boot, put the USB - HDD on the top of the boot priority but in vain.

  In legacy BIOS mode, I can boot and install windows, but the touchpad mouse does not work, only the USB mouse functions.

  How can I add UEFI boot USB flash?

  Thank you in advance.

  You did right, but sometimes the USB interfaces are not recognized by the system, I had some problems with a pair of USB pen which has not worked as a boot device, but another one worked smoothly.

  don't forget to have your HDD or USB pen in FAT32.

• HDD not found/detected when using the UEFI Boot

  I have a HP Sleekbook 15-b035tx, which came with a windows 8 OS already installed. a few reasons, I tried to quarterback to windows 7. After several unsuccessful attempts, I finally managed to install windows 7 by changing my boot for a legacy starting sequence.
  later due to lack of drivers for win 7, I installed, instead upgraded to win 8 running on existing startup (using the MBR if im not wrong). now, I want to install a new copy of victory 8 with UEFI, but the problem is when I change my boot sequence disable startup inherited, then installing win 8, I do not see my HARD drive ... im using a flash drive to install win 8 which is already in the UEFI (I used diskpart to do this).
  also, when I use legacy boot and try installing windows, then the HARD drive is displayed and when I format the HARD drive and create new partitions, he created 3 partitions (System, MSR), reserved and the fourth for the OS. I tried to install the windows like this, but after installation, when I change the boot sequence in the UEFI even once, it does not start

  now I want to install windows in the UEFI... and I really need help with this please ... I hope I explained the scenario... If someone wants to ask anything, please don't ... as I really need this out... and also, I would like to ask that how can I check if my HARD drive has been changed from MBR of GTP

  Hello:

  I can't find the specifications of product for your model - only these introduce yourself.

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=15-b035

  They all have Intel hardware with an nVidia GT 630M graphics card.

  If yours has the same characteristics, you can install W7 64 bit there without too much difficulty.

  I know where all the drivers.

  If you do not see the HARD drive normally you must load the sata drivers.

  See if it works in uefi mode...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash drive and the installation of W8 media plugged into the machine, boot from the installation of W8 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope that the W8 should install.

  If this does not work, and no one else can help out you, let me know if you want to install W7 x 64 on and I'll guide you installed the drivers you need.

• Anyone got the server MBean autonomous consistency running on the http protocol

  I have the com.tangosol.net.management.MBeanConnector market very well on the "-rmi" option for the Protocol, using JConsole as the console for display. I do not see to make it work '-http "well. The MBeanConnector server starts, but then stops after a few seconds. I use this upward on Sun JDK 1.6.20 on Linux. Even tried to use the option to set a different port number, but still does not (output right after a few seconds) over http.
  
  I switched the log level to '5', but I don't seem to get any kind of error. Just the output of the server after a few seconds of running. As I say, everything works perfectly if I specify "-rmi", but not for '-http. Anyone got this working on http?
  
  See you soon,.
  
  Steve

  Yes, they are not part of the Java SE specification - they can be downloaded from Oracle/Sun at http://java.sun.com/javase/technologies/core/mntr-mgmt/javamanagement/download.jsp.

• After the passage of the UEFI boot problem boot in legacy (V5 - 471 g ACER WINDOWS 8)

  Hello! I just change the boot settings in the BIOS to UEFI for Legacy (Windows 8). After passing them, I turn on my laptop and I see "Operating system not found" and "Media test failure, check cable of...» "Moreover, I use an Acer V5 - 471 G Windows 8. Please help me! PS My W8 is pre-installed.

  That's what I did...

  the same thing as you...

  to solve this kind of mess...

  First, you must download from the acer site, the last driver BIOS for your laptop.

  (use another laptop)

  but you need to install a single... but don't worry, it will ask you if the file you are trying to install is not necessary... I used version 1.22... (it depends on the version of the bios, the starting version number must be the same., mine is 1. xxx 1.22, I was invited that installing it is not fair, she says that it is incompatible)

  then, once you have downloaded, unzip it...

  Make sure you have it on a USB (usb)

  Second, since you have the Disc... use it...

  http://www.SevenForums.com/tutorials/139810-SFC-SC

  This shows how to go to the command prompt by using repair disk (this can be win7 is virtually the same, only gui is different)

  go to repair your computer option where you will find many options...

  Choose the option to open a command prompt.

  as your in drive X: that is the container for the discount, go to the current folder of the file...

  X: > F: (if F is the letter of the usb key, then F, if not, then use the corresponding to the USB drive letter)
  ... go to the bios folder
  F: > cd BIOS_Acer_1.22_A_A/BIOS_Acer_1.22_Windows/Windows

  then run the Update.bat

  (must be that your battery must be greater than 30 %..)

  If so, simply run the Update.bat

  F:/BIOS_Acer_1.22_A_A/BIOS_Acer_1.22_Windows/Windows > Update.bat

  just wait and voila... it's fixed

  mine is aspire v5 471g

  just tried the boot legacy... and f2 was (as expected... does not work)

  I just did what I said here and it worked again, bios has been returned to factory settings and I just sit here having a smiling face...

  Thus, a very big reminder...

  What happened, never turn your computer off by updating of the bios... just to be sure of something stupid happens

  If this does not work... try again the 2.17 sir...

  Unzip the exe file it y...

  After that...

  Locate the update.bat and then run...

• Has anyone got the upgrade of GPU for H8-1234 with motherboard HP M3970AM HP (Angelica2)?

  I improved my diet for a Corsair CX series CX500M 500W ATX 80 Plus Bronze modular power supply 12V successfully and I want to assure you that I have buy a compatible GPU for the motherboard.

  If I go to http://www.pc-specs.com/mobo/HP/HP_M3970AM-HP (Angelica2) _ / 2042 and click on compatible GPU it lists AMD and Nvidia cards.

  The series of HD AMD goes up to the HD6000 series and does not list any HD 7000 series.

  The only Nvidia 600 series which is decent is the GeForce GTX-660-670-680 or 690.

  The site also shows (these graphics cards have an appropriate interface to work with and integrate into the HP M3970AM - (Angelica2). Because this motherboard does not have a GPU chip on board, we have also limited GPU integrated only to those which are integrated to die of a CPU.)

  Cards GTX listed are all much more expensive than 650 Ti DirectCU OC Boost 1085 MHZ 2 GHz 6.0 GB GDDR5 2xDVI card PCI-E HDMI DP that is not listed or even GTX550 TI, which is not listed

  The Amd HD listed series cards are unavailable or more expensive than most of the HD 7000 series.

  Has anyone successfully installed a card $ 100 from low to medium priced which is a significant improvement on the hd 7450? If you could please let me know what graphics card you purchaced.

  Thank you

  Gbrown13, welcome to the forum.

  The limiting factor for the video card upgrade is the power supply unit (PSU).  It is 300W.  Intermediate level maps latest require at least 400W to work properly.  7450 HD comes with the computer has been designed for HP operate with OEM PSU.  A detail 7450 HD very probably would not work.  In addition, you should limit the length of the video card to no more than 9 ".  This ensures that it fits in the space provided.  The majority of the double cards are 1.5 "wide.  These are normally without any problems.

  I hesitate to recommend a video card on the grounds that it will be much better than an existing map.  It is difficult to say that this is the case.  Here is a map which might work for you, with an upgrade of the power supply.  Read the reviews to see what users have to say about it.

  If your problem is solved, please click "accept as a Solution.

• C50-30 guard reset of the UEFI boot sequence

  Fedora 22 works fine on the C50-30 and starts fine with Secure Boot. However I still have to press F12 and select manually the Fedora shim on each (re) start, because for some reason any firmware guard reset the boot order to put Windows first.

  No matter if I move Fedora over Windows boot manager in the configuration utility, or efibootmgr allows you to change the order. After leaving the installation utility, the command is immediately reset to zero.

  I missed another adjustment here, or is this a bug in the firmware? BIOS version is O1XKT06AUS.

  It's a bug in the firmware. No problem if I rename \EFI\Microsoft to something else and make a new entry EFI (and adjust the GRUB configuration).

• uninstall the uefi boot just win 7 64 bit

  I just installed a windows server 2011 and that it will not support my UEFI system, I can go back to just 64-bit without having to re install everything?

  Hi Alexander,.

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• Has anyone got the coding device?

  My motorcycle g 2nd generation crashes when you use this procedure:

  After you load a code PIN or password in settings, security, coding phone menu. After the restart is required code PIN or password. If you miss it identifies the password error or the PIN code and send to repeat the procedure. If you put the PIN code or the password, it will stay forever with black screen. The procedure to reset the phone, which means that you will lose all the data stored on the device must be done. I opened a complaint with the motorola but not answered me.

  Entries repeated invalid PIN 10 times will result in a reset of the data. It is normal for your device is blocked. If you are talking about another scenario capture video and download it here as a file or link via YouTube.

  Mark

  Forums Manager

• Has anyone got the Wake On Lan to work on desktop HPE h8-1110?

  I turned on WOL in the BIOS and the integrated Realtek Gigabit LAN adapter properties are set to wake up the PC.  Magic packets are enabled.  Under the system, Win7 Home Premium 64-bit.  PC is connected and APC UPS.

  Hi Frank,.

  You might want to look at this article on WOL MS and then this article.

  Recheck the WOL in the bios.  S5 must be enabled.

  How do you know if the magic packet is still trying your PC? Try this article and this article.

• My creative cloud hang on to 5%. anyone got the same situation?

  Try to update the creative cloud but hangs at 5%. I just try to download again, but still after crashes and sow a message with error 201;

  Uninstall Adobe Creative Cloud app using the uninstaller CC:

  https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* Milestone]

  Impossible to remove? Rename the folder Adobe Creative Cloud centenarians.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Restart the computer once.

  Step 5:

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Connect to CC - stuck on "Installing update..."

  Re: Update course Creative Cloud stuck at 5% since yesterday

  Concerning

  Stéphane