Anyone know if os 10.6 startup on an iMac end of 2015?

Similar Questions

• I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.

  Original title: whistle sound at the start of the pc

  I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.

  Hi Cupcake3381,

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• Startup programs - (32-bit) - anyone know what it is?

  I was going through my startup programs today to turn off some of the unwanted programs that have slipped into my system.  I came across a program named "(32 bits)". "  I don't remember having seen it before and I was wondering if anyone knows what it is and what it does?

  Thank you

  Bob

  I have no idea, but it is not required for Vista so I could uncheck it and see what happens.  If something that you want to start does not start all double check more of her and you will know what it's for.  If everything works fine, then there was no reason so that it starts in the first place (since it is not part of Vista, and you don't know anything about in reference to any other program), so you have done a bit of cleanup.  It may be remanants against malware that your AV software removed but missed this point (it is so very good to remove it).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Recently, I deleted my partition bootcamp about 65 GB space. However, after that I restarted my MAC, the 65GB is lost! The total space in my HD is currently 434GB although it should be 500 GB! Anyone know how to recover my space 65GB?

  Recently, I deleted my partition bootcamp about 65 GB space. However, after that I restarted my MAC, the 65GB is lost!

  The total space in my HD is currently 434GB although it should be 500 GB! Anyone know how to recover my space 65GB?

  See below for my disk utility:

  

  

  Hello waynetay,

  Thank you for being part of the community of Apple!

  Looks like you want to recover the hard disk space that has been used by Bootcamp.  I know how critical disk hard space is, as I understand it want to access it.

  The Boot Camp Assistant should have added space on the side of Mac OS X from the hard drive when it has been used to remove Windows.  Since that didn't happen, you need to back up the system, and then erase the hard drive, then restore the backup.

  First, back up the computer.  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Once you have the backup, you must erase the drive and then restore the backup Time Machine.

  You can use these measures to erase files on your startup drive and install a fresh copy of OS X:

  1. Before you begin, make sure that your Mac is connected to the Internet.
  2. Restart your Mac. Immediately hold down the command (⌘) keys and R after having heard the startup sound to boot into OS X Recovery.
  3. When the recovery window, select disk utility, then click on continue.
  4. Select the volume name back from your startup disk in the left side of the disk utility window, then click Delete.
  5. If you want to erase the disc safely, click Security Options. Select an erasing method, and then click OK.
  6. On the Format menu, choose Mac OS extended (journaled). Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.
  8. If you are not connected to the Internet, select a network in the Wi-Fi menu.
  9. Select the option to reinstall OS X.
  10. Click on continue and follow the instructions on the screen to reinstall OS X.

  Once OS X installation is complete, you should have the option to restore from a backup Time Machine in the first installation of OS X.  Choose this option, and the computer will restore everything that was on it before it has been removed.  More information can be found here:

  How to reinstall OS X on your Mac

  Have a great day!

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Does anyone know what wlara08.dll is?

  Does anyone know what wlara08.dll I have a Trojan horse in that folder that I can't remove.

  The problem arose in a routine virus scan

  My program cannot remove this Trojan.  I deleted this dll file, but whenever I turn on the computer, it tells me that it cannot run the file.  But I can't know what this file is for.

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• Does anyone know what my kernel panic kext refers to?

  I was having repeated panic the kernel in the Sierra, all type 13 and all listing the kext even first in the backtrace:

  Extensions of core in backtrace:

  com Apple.KEC.pthread

  I'm not a developer so I am just grasp at straws in my diagnosis, but does anyone know what exactly that might be related to the?

  For the record, I tried to remove RAM 3 rd-party and disconnect all devices. I have not been able to identify specific behavior that triggers the panic, and it may happen even when the computer is not used. I tried the Safe Mode for short periods of time without incident, but who can tell me only so much. I have an own account which has not yet experienced the problem, but I can't run in very long and get real work done. I'm open to other ideas for troubleshooting. I really do not have to recreate my account from scratch.

  The first class kext is can be the last load one - that is not necessarily the one that is choking on the Mac.

  If you want to help spread the output in full panic. Frankly, I don't have the ability to diagnose for you, all I know is that you give us your own diagnosis when the symptoms detailed is really required to help.

  Watched as Apple Diagnostics?

  Apple Diagnostics using - Apple Support

  It can help you if your hardware is part of the question, see if anything it appears that sometimes new operating systems can bring latent problems to your attention.

  Also I would suggest looking at a report of Etrecheck (or post it here) to see if you have a very old software installed that may conflict.

  http://etresoft.com/etrecheck

• Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Settings > display and brightness > raise to Wake

• Does anyone know how to get rid of the voice? More my screen is black

  DDoes anyone know how to disable voice? Also my screensaver is not showing anything

  Hello

  To disable VoiceOver and curtain of screen (which explains why your watch screen is off), follow one of these steps:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > VoiceOver > disable VoiceOver.
  • Or use Siri:
    • Use Hey Siri or press and hold the digital Crown (round button) until you feel a slap on the wrist of your watch.
    • Then say: "Disable VoiceOver."
  • Or, if the shortcut of access has been enabled and configured for VoiceOver, you can disable the feature of your watch:
    • On your watch: try to press quickly on the digital Crown three times.

• Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  I've just updated to Sierra. Since the upgrade did several reboots. When I discover an app the side also shows "4 +" or similar and I click on the note to view reviews and ratings of customer, a blank screen appears. Everyone knows this or have a way to solve this problem?

  I see even here in Seattle, so I think the question is about the end of Apple.

  By the end of 2012 Mac minis, macOS?  Watch 38 mm silver AL, watchOS 3; iPad 2 Air & iPhone 6 + iOS 10.0.1;  Apple Airport Express

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• How cancel a monthly fee for storage space I need is no longer? Does anyone know how to do this?

  How cancel a monthly fee for storage space I need is no longer? Does anyone know how to do this?

  You can change the storage volume by selecting a new plan directly from your iPhone, iPad, iPod, Mac or PC (for example, a plan of 5 GB to replace a 200 GB plan). The downgrade will take effect after the end of your monthly or annual subscription in progress.

  iOS

  
  

  1. If you use the iOS 8 or laters, go to settings > iCloud > storage. If you are using an older version of iOS, go to settings > iCloud > storage and backup.
  2. Click Change storage Plan.
  3. Press Downgrade Options and enter your Apple ID.
  4. Choose a different plan to use when the expiration of your current storage plan.
  5. Tap done.

  
  OS X

  
  

  1. Choose the Apple menu > System Preferences, and then click iCloud.
  2. Click on manage in the lower corner on the right.
  3. In the upper right corner, click Change storage Plan.
  4. Click Options to Downgrade.
  5. Enter your Apple ID password, then click on manage.
  6. Choose a different plan to use when the expiration of your current storage plan.
  7. Click done.

• I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  You have to ask Apple why the design has changed. You should still be able to delete songs by changing your selection of synchronization and synchronize.

  Or you can delete songs directly on your iPad and other iOS devices, directly in the music app or via settings > general > storage & use iCloud > storage management > music