Anyone using an external battery?

Similar Questions

• Satellite A200 use external battery

  Hi all.

  I have the Satellite A200-PSAE6E, and I bought a universal external battery. But external battery cannot produce enough current to my laptop when the internal battery is not full. When internal battery is fully charged, external keeps it full and portable computer running, but when the internal battery is not complete and I plug the external battery in seconds laptop shows that it is plugged in, charging the battery, but after a few seconds, it shows only that the laptop is plugged, and battery charge.

  Problem is that when the laptop is plugged in and the battery won't charge it uses an internal battery (as when it is not plugged in), and it drain the internal battery it turn off and there was still shows that it is connected. Can I define that when the laptop is plugged in, but does not charge to use external power?
  I'm sure it's only the software solution.

  You ad is really confusing

  I have a question; Is the external battery designed for this model of laptop and Toshiba recommends use this external battery in your laptop?

• external battery

  just picked up a hp 7 more tablets and want to use an external battery.  I want to confirm that I need the 5v pack

  5 volts is correct.

• Reference Dell place 8 Pro not load external battery - is it true?

  When I was interested in buying the DVP8 I went on the specs with the Dell rep to make sure it would be aware of my external battery to 5v 2.1 amps.  I travel on the very long flights, so it was key for me.

  Anyway, long story short... I'm on my third unit and it still won't load of maintenance of my Inspiron 15R is my external battery.  Today when Dell called to follow with me I told them I still have problems.  Finally 1) it wouldn't charge my laptop because I am running W 8.1 and it was designed to not pay the tablets and "other devices" and 2) it won't load my battery external even though the specifications they me are right because it was not designed to do.

  I don't think that is correct.  For point 1 - I charge my band of fuel, shows Suunto and other devices in the computer.  How would he know the difference between these devices and the Tablet?  (At least that Dell built something in their software because they are both Dell devices?)  Point 2 - in this forum I've seen read that some people are able to charge their devices with external batteries by bypassing their cable some how.

  Someone mind check for me that they were able to trickle charge their device with a W8.1 machine or an external battery?

  Okay, so what the representative has me BS.  I found a micro USB cord provided with either of my Samsung products today rummaging through a drawer.  With this cord, it will charge when I plug it into my Inspiron 15R IS, so it is not what that it is programmed in Windows 8.1 to prevent load "tablets and other devices.  Also, when I plug it into the same battery external ol ' that I tried to use it, it will charge with this rope.  Also, if I use this rope with a generic ankle, it still load.  So, it has NOTHING in the design to prevent it from loading it with other cords similarly spec'd and caps.  So 4 months and 3 devices later, I finally have answers to my questions and a solution.  BTW, if anyone wants to try, the cord has been marked for a product of the Galaxy Tab.

• Pop/clicks in audio when you use an external DAC of lightning with iPhone 7

  Has anyone tried using an external DAC lightning with the iPhone 7?  I have a TEAC HA - P50 and a Bayerdynamic A200p and both have the sounds by clicking / jumping when the music plays.  Permutation of the cable does not resolve the issue.  These questions were not using a 6 s iPhone or iPad iOS running Pro 10.  Lightning provided the 3.5 mm adapter does not have the same problem that makes me wonder if it's just a problem of compatibility with the new iPhone.  The problem is present on an iPhone 7 runs both iOS 10.0.1 and 10.0.2.  Thanks in advance for any help you can provide.

  I have exactly the same problem running Dragonfly black DAC, random appears, click on the bangs. Audio format makes no difference, nor does the file be listened to downloaded. The CAD even works great with a MacBook Pro running macOS Sierra.

• How to use the external USB camera on iPhone IOS 6?

  Hello

  I need to use an external USB Endoscope for the inspection of vehicles and etc. using IOS on iPhone 6.  I bought an external USB 2.0 adapter lightning, plugged in the endoscope (comments showed that this endoscope works on IOS devices) and it pops up and says that the device used too much power to be used on the device.  You are not sure if Apple cut the device to use at that time or not? But the device was always powered up as shown on the drive of the USB light on the endoscope.

  I downloaded several types of applications of the observer including I think that the right VLC who apparently used one of the reviewers and I couldn't figure out how to get an any of them to allow the selection of an external camera.

  Does anyone have an idea if it will work or how I can make it work?

  I would be very grateful for any input or assistance with this!

  Here is the link of the product:

  http://AMZN.to/25pJpXY

  Thank you very much

  Dave

  I must also point out that this unit has worked on Android Samsung Galaxy Note 5 with no problem and no warning of power.

• Portege M800-106 - bad quality by using the external monitor

  I use an external monitor LG Flatron L1811S on my Portege M800 and find that the image is not rock solid when I use the display on my desktop or screen of the M800.
  It is particularly visible on the big patches of color block where I can see shimmering light. I noticed that it's especially bad if I recently reconnected the laptop to the network after using on battery power until the battery is fully charged.

  This makes me think that the PSU interferes with the VGA output?
  Any ideas?

  Thank you

  To be honest I m more important lack of information in your ad.
  Are you using the native resolution - 1280 x 1024 / 75 Hz on screen?

• TV Clip - use with external power?

  I mounted a large SD card on my clip and I wanted to use it to record the long walks, but the battery lasts 1 hour. I plugged an external battery to the USB connector but when I did this it will not allow aid such as a camcorder. It is not good that I can't use it then for more than an hour before having to recharge! How can I solve this problem?

  The Camileo Clip has an endurance of about an hour.
  The Camileo snap the playful s, part camcorder designed for shooting small segments of a group event.
  Unfortunately, the battery is placed in the case of the camileo camcorder, so that you can t take with you spare batteries.

• How to use the external screen with my Satellite M30?

  Hi guys, I have the following problem:

  I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard.

  Now that I bought a TFT I wanted to use it as a primary device, so I need to take the laptop to the external output.
  The laptop itself recognizes as a secondary screen already, but this isn't what I want.
  Problem is I can't switch from the display without the FN key devices!

  I tried to search the net and this forum - but the solution posted does not work for the M30. There is no option in the utility of HW and not in the BIOS to enable the external keyboard support.
  Please is there any other combination of keys that would work or a software utility that allows me to turn on? It's a really bad situation for me :(

  All solutions anyone? :(

  Greetings and thanks in advance
  HQ

  Hello

  Please don't be crazy on me but I write here very often and somehow try to help, but I'm still irritated if someone thinks that anything is possible. Unfortunately, you have to accept that sometimes there is hardware limitation and there is nothing to do.
  I want to talk about primary and secondary monitor.

  On most laptops, the LCD is always set as primary and cannot be changed. So, as far as I know, without using the FN + F5 key combination you extend the desktop to external display and use both of them. Using display settings you should be able to switch to an external display only (display control panel settings NVIDIA advance settings and so on). Please test only because I don't have M30, but the principle is used the same.

  If you will be able to use external display only try to restart your laptop and see on which screen the office will be shown. If you will be lucky and office will be shown on the external display, try to extend the desktop to second monitor (laptop LCD).

  Good bye

• Equium A100-147: can I use an external mouse wired or wireless

  Hi just bought an A100-147, anyone knows if I can use an EXTERNAL MOUSE wired or wireless

  Hi Peter,.

  You should, as far as I know, be able to use two types of mouse; I know that many people find it more natural and easier than the mouse pad integrated, but that is purely a personal preference.

  A wired mouse plug directly into a USB port or a round PS/2 port, check the ports that you have before you buy anything, but you should have no problem with USB.

  Use of wireless mouse a small receiver which plugs into a USB port and would be normally equipped with software to run it.

  I hope this helps.

  Weezle

• What is the best external battery for Backflip?

  I'm looking for an external battery that can be used with my Backflip.

  I tried instant Duracell and the Central, but they do not work.

  I prefer Li - ion rather than the type of AA batteries.

  I have an Energizer xp1000. It extends the life of about 2-3 hours - I would like to get more. For the f/b a right angle connector would be good - not available with this kit. And the current end seems to have got loose - keep thinking its disconnected and reconnected and say...

• Do not charge the external battery ThinkPad T440

  Hello community,

  I use a T440 with WIN8.1 machine pro, but for some reason any external battery stopped charging. This laptop is only 3 months old Lenove send me a brand new, but the result was the same, the charging symbol appears on my screen when restarting the machine and shrotly after completely stops. Now, I had my internal battery pack has changed and once again, no improvement. If any of you had a similar experience and can suggest a remedy?

  just had an IBM engineer on the site and that they have was change the motherboard of the laptop. Frankly, nobody seems to know how or why the machine won't start. Since the new motherboard was installed everything seems to be in order and work very well.

• T440s not detected on hot swap external battery

  Initially I thought it was just a problem of linux.

  Its the same thing on windows 8.

  Remove and then reinsert the external battery and windows some extended shows two stacks when you right-click in the system tray.

  The battery is detected again when I:

  Insert the power cable,

  suspend and resume

  put into hibernation and resume

  Restart

  I'm on BIOS 2.17

  Does anyone else have this problem?

  Michael

  For me it turned out be a hardware problem.

  Catches of battery marked '1' on the back do not seem to go far enough to trigger the events of the APCI indicating the battery inserts.

  I found if I removed the plug completely manually and pulled him so the battery would be detected.

• Touchpad HP Pavilion 17 works does not after using an external wireless mouse

  I have the HP Pavilion 17 laptop.  It is running Windows 8.1.  Everything worked fine until I used an external wireless mouse.  After unplugging the mouse the touchpad does not itself again.  I have therefore no pointer and no touchpad to use unless I have keep the external mouse not connected.  I tried the hard reset with the plug of the battery, unplugging, pressing the power button for 15 seconds and turning everything back on.  Still no work touchpad.  Had this happen last week and called HP because I only had the laptop for 3 days at this time here.  They had me do a system restore to an earlier point.  At this point, everything worked again and I toilet problem has been resolved.  This is why I used the external mouse always thinking that it wouldn't be a problem.  I was wrong.

  Also, I've seen other posts on a different notebook that has a toggle power button in the upper left corner of the touchpad to activate/disengage, but this was not one of these.

  Any help would be greatly appreciated.  My next step is to call HP again tomorrow and see if someone else has another solution.  I would obviously like the ability to use the touch pad or external mouse at any time without having to restart and go through all these other problems.  Otherwise, this phone pretty may be going back to the store this weekend.  :-)

  Thank you!!

  This fixed the problem! Thank you very much!! Seriously, 3 different phone calls to HP and not one of them ever talked about this easy solution!

• External battery V5 - 122P

  User's Guide points out this pretty little port and holes on the bottom V5 - 122P threaded to fix an "optional" external battery This can also be seen mentioned on tech review sites or lists of products at different dealers.

  She fails to mention a part number or anything like that. It is not found on the Acer site. In response to an inquiry, Acer support said that if the computer is not shipped with the "optional" external battery, it is not available.

  Huh?

  Why put the port there? If Acer goes only to the provision of certain shipments? Why not use a different cover that hides the port on the bottom of the computer and not to mention that there is?

  Everyone found this battery or have any further information on this subject?

  I wanted to provide feedback based on demand, we have the battery available for sale in the United States.

  http://store.Acer.com/store/aceramer/en_US/PD/ThemeID.35703000/ProductID.289201600

  Hope this helps,

  Cory