Anyway to be notified if a device is reset?
Nice day
Although far-fetched, (application crashes in particular), is it possible for an application to be notified if and until the device has been reset?
Since I use information in the store of DURATION, and make clean up routine tasks, I would need to perform these tasks before the unit resets.
See you soon,.
Nik.
SystemListener.powerOff ().
RuntimeStore is allowed out right now too.
Just referring to your previous question, for things like ApplicationMenuItems, it works really well. If you add an ApplicationMenuItem and add it to RuntimeStore, you can detect whether they have been added by checking your RuntimeStore. And you have no need to remove to powerOff because it will happen anyway and your RuntimeStore is erased, keeping everything in sync without any effort on your part!
Tags: BlackBerry Developers
Similar Questions
-
Amazon kindle device default reset after purchase
Recently I started to have a problem (in the last week or two). I put my Amazon kindle device default. I buy a Kindle book. The default kindle device is reset (none of the devices are the default). I deleted the cache and history. No effect. Tried on another PC and got the same error. Tried in IE and no error - device by default are still together. If there is something in maybe the last version of FF, which causes this setting by default to lose? (I was not able to determine exactly where the Kindle device default settings are preserved, but it seems to be in the browser, as FF doesn't and IE works on my PC).
Firefox for Android will not affect the default settings of Kindle. However, I understand that what happens after buying a book. Check your account settings to verify that there is no preference for the device being edited. Also contact Kindle support team, I saw that they are excellent.
-
Unknown device PORT RESET failed
Can pls guys someone help me solve this problem?
* Unknown device port reset has no * I tried to install the drivers, but they are not installed, but the ports are supported, but don't recognize any USB device.
Hi Babatijo,
Depending on the issue you get the error message ' unknown device port reset failed. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.
Method 1:
Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.
If method 1 does not work, try Method 2.
Method 2:
Remove and reinstall all USB controllers.
- Open Device Manager by pressing the Windows key + X and select Device Manager from the list. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the list of the categories of equipment, locate and expand Bus USB controllers.
- Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
- Restart the computer and let the USB controllers get reinstalled.
- Plug in the removable USB device and test to make sure that the problem is solved.
Method 3:
Disable USB selective suspend framework. This method prevents your power off USB device.
- Press Windows key + Q, type of power management in the search box, and then click choose a power plan.
- Next to your currently selected plan, click Change Plan settings.
- Click change advanced power settings.
- Click in the box USBsettings, and then expand the USB selective suspend settings.
- Click on the area, and then click the menu drop down and select disabled.
- If you use a laptop, click the cell, and then click the menu drop down and select disabled.
- Click apply, and then click OK.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
Photon: Notifying administrators of device->; Admin
Hello
I can't find information in the manual of the phone on this setting. Admin Notifier is intended to be an application that allows you to control some security settings, but I can't find or configure it. Any help would be appreciated.
Thank you.
-
I have a new computer. I installed the beta version. I run beta 2 other computers a Tablet and my phone. He taught me that I needed to separate other devices and try again. My credentials will not work and a reset email hasn't shipped yet. I would get my devices connected and connected again. If this is not possible I reluctantly will go back to explore. Mozilla has been so easy to use so far? Very frustrating.
Hi bizebill,
Thank you for your question. I understand that you want to synchronize all your devices. Please make sure that all the devices are updated at least at version 29.
If you were on a version before that, you need to set up a new email and the password with the new synchronization.I hope this helps.
-
If the speakers are enabled when you connect headphones, headphone does not work unless I go into the control panel playback settings and change the headphones 'by default'. Then to return to the speakers when headphones are removed, the procedure is reversed to set the speakers 'by default'. in the Panel of reading the speaker shows option 'speak' not the typical ' speaker/headset '. The option for headset is "helmet" that is correct.
Is it true that the desired device should be selected by default every time? I find it odd and very annoying. In general the speaker option would show two 'speaker/headset' so that when plugged in or unplugged the headset you can go back between the speakers and the headphones. In this situation with just listed "speakers" is not possible. Anyone else having this problem.
Once chosen as a default value, each device is functioning. With the help of Windows 10. Everything else seems ok.
have you tried to uninstall your audio device from Device Manager and reboot? I know its sounds counter productive, but often, when you uninstall something, then the system recognizes that you have a device installed, it re - installs the default drivers of factorty for device of theat and Voila! It works somehow. A little nutty in how I have described, but try it, simply right click on your audio device from the Device Manager and select uninstall, it will give you a window with something like "You are about to uninstall Yada, Yada Yasda" but follow through, then restart. I have fixed this way before from udio. Don't forget to restart.
-
Device to reset when you use javaloader to load an application
When I load an application through javaloader sometimes resets the device and sometimes it doesn't. Can someone tell me why?
Here is the command line I use: javaloader loads u - TestApplication.cod
As the reset time is so darn long I would ignore. Can I do something to ensure that the unit does NOT reset when I insert a request?
Take a look at the KB article.
-The reason for which reset is required when you upgrade an application
Concerning
Bika
-
vCenter Orchestrator device password reset
Hello
I have installed vCenter Orchestrator 5.1 camera, I'm unable to connect http:// orchestrator_server : 5480. It is said Impossible to authenticate the user. Please RΘessayer.
I would like to reset the root password. Please let me know how can I do?
Thanks, Vinod
Hi Vinod,
Here is an article describing how to do it on vCenter device - http://kb.vmware.com/kb/2069041
The steps should be the same for vCO device.
I hope this helps.
-Ilian
-
BlackBerry 9000 365 device error reset
not can any 1 help me pls my blackberry wasn't working 1 min and the other he exploded, now maintains flashing red light is any 1 no fix how 2
Hello initmon,
The question you have posted is related to Blackberry and would be better suited to the Blackberry Forum community. Please visit the link below to find a community that will provide the support you want. I advanced and found a thread that has been done to this exact error code.
http://supportforums.BlackBerry.com/T5/BlackBerry-Curve/error-message-365/TD-p/29720
Thanks for the display of Microsoft Answers and troubleshooting of good luck. -
Clean up my RuntimeStore object
Hi, expert,
I have an application that would couple objects in the Bank to run at startup. However, I would like to clean up the store to run when the application exits. So usually my application remove TERM store the output.
However from this link: http://supportforums.blackberry.com/t5/Java-Development/Any-way-to-be-notified-if-a-device-is-reset/...
on the power to the device turned off, the store of runtime would have perhaps cleaned as well which seems never made sense to me since it's just a sleep state in order to disable. With this, it would mean that I would need to put the object in the store of runtime to the power on. I have to my request. Kind of tests, I saw store is cleaning on power off of the event that is not a reset of the device.
Any confirm on that?
I've updated the thread. My comment in this Thread is not correct, your comments reflect what I see.
-
I have a SG300-28 here, but I don't have the password to connect to the device. The switch startup configuration, I see that the password is encrypted. Is there anyway for me to access that device without reset it?
Hi blue, yes it is a password bypass procedure.
You will need a console access.
Follow the first part of this paper
https://supportforums.Cisco.com/docs/doc-27000
Step 1, 2 and 3, and step 4, instead of option 1 reviews, use option 3.
After that, the switch will start normally, then you should just be able to hit enter to get pass the password.
-Tom
Please mark replied messages useful -
Satellite Pro A100 (PSAAC) - freezing for a second unknown device
Hello
I have recently reinstalled Windows on my computer, after installation, is a problem. With an interval of 10-15, my computer hangs at about a second - the computer reacts to the entry, and if a sound is played he repeats again and again.
I don't know if it has something to do with it, but when I start the computer I get the error message "cannot read the Manager!" I noticed that I have a unknown device in my device manager, location: location 65535 (internal Bus High Definition Audio). I can't find the driver.
I don't know if the problems are related, I just want the freezing part to fix.
Best wishes
HansHello
you have installed a sound card driver? Anyway, how to identify the unknown device, read here:
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58
-
How can I stop my photos be deleted from all my devices when I remove my phone is off
How can I stop my photos be deleted from all my devices when I remove my phone is off
With no information can only guess
My guess is that you are using iCloud photo library and if that is correct, then this is the way ICPL works and why it exists - it synchronizes the libraries on mulciple devices by keeping anyway - any changes made on any device is performed on all including additions, deletions, and modifications
If this isn't what you want then you should not use ICPL
For devices with limited storage you put to use optimized photos keep the originals only on iCLoud photo library and any other device with large storage available
LN
-
Satellite L500D - peripheral unknown listed in Device Manager
Hello world
I have a Satellite L500D and in other devices under Device Manager, I have unknown device listed. I installed all the drives listed on the Toshiba page without success, anyone had this before and if so please can you me how to fix it.
Can you please tell us what OS you are using?
Anyway, how to identify an unknown device in Device Manager, you can read here
http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htmPlease, check and send comments.
-
USB device not shown in my computer
I do not understand what is the cause, anyway when I plug in any device USB on my laptop, I'll take the sound alert that Windows detects a USB (two high-pitched sounds), and the 'Remove hardware safely' icon at the bottom of the toolbar, Windows, so obviously recgonises a USB that I believe has been found , however, in my computer, the USB device is not here to open
I also downloaded a video on youtube showing the problem as I have explained
http://www.YouTube.com/watch?v=nvk1ZBQkXu0&feature=youtu.be
Perhaps Daemon Tools have something to do with it?
Edit: I forgot to mention, plug USB devices all worked before as...
Any help will be much appreciated, I'm not experienced with computers & programming either, thanks
Hello
You did changes to the computer before the show?
I suggest you try the steps from the following link:
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575
Maybe you are looking for
-
How can I find the name of an add-on running in Firefox / Win7
I want to use the add-on Firefox even I have on my desk on my laptop, but I don't remember the name of the add-in. How can I find out who. I am running Win7 on my desk.
-
Is there an alternative enforcement camera ios, which will offer the possibility to open the mode 'video? I need to use the video a lot and now I need to use the camera app standard (which open always s on the image mode, which then requires me to se
-
I'm reading a file that is in binary, and I've been uncessful, I get the following error message: error 7 has occurred to open/create/replace file in TESTEXAMPLE.viand the possible reason is: LabVIEW: file not found. The file may be in a location dif
-
I would like to know how to learn and complete a full game with XNA?
I think to make a game for my junior using XNA project, and I was wondering, how much it takes just to finish a game because I get a semester for my junior project, also what I need to know if it's 2D game can I finished it mine, or do I have to join
-
I tried to update windows defender on my Xp SP3. error message cannot update code 80240016 x 0 definitions