Photon: Notifying administrators of device-> Admin

Similar Questions

• ACS 5.1 using Active Directory to manage the strategy of network device Admin

  Hi guys, we have configured an ACS 5.1 and integrated with active directory Win2K3, we created two AD groups to manage devices network for administrators and one for operators (read-only), so we have configured a device admin strategy and the two groups work very well, but now we are facing a little problem any user that exists in the AD can connect (user exec mode) network devices and we want to cancel the connection with politics, but we do not know how.

  Is there a way to get a user authenticated against acs internal or external group, but at the user level, everything as you can make it to GBA 4.X?

  Thanks for your help!

  Best regards

  Oscar

  Yes, you can change that, it's a profile of shell by default. You must create a new one with privilege level "not in use" and select the new profile of the shell (no Directors or Operartors) under Default Device Admin > authorization profile > edit and make changes.

  I hope this helps.

• 5.2 ACS using ad to manage the creation of strategies of network device Admin

  Hi all

  Need to light here, we were able to integrate our newly installed ACS 5.2 in our regional area.  now I create an Admin Access political device for the regional network administrator group and regional network operators. each with full and reading access respectively.

  I already have the default identity policy and authorization with order policy defines fullaccess and showonly for each group, now I don't know how can I match the AD Group regionaladm and regionalops so that each user is part of one of these groups will have a proper read/write access.

  Kind regards

  Marlon

  You need start adding rules to the authorization policy

  Reach

  Access policies > access > default device Admin > authorization

  Press 'Customize' and make groups of AD1: External a condition select and press OK

  You can now make rules based on the content of the AD groups

  Tap on create and check the option AD1 groups: External and now can now enter the groups that you want to check for access

  Note all of the groups can be selected is defined in

  Users and identity stores > external identity stores > Active Directory

  Only the groups selected here are available in politics

• Anyway to be notified if a device is reset?

  Nice day

  Although far-fetched, (application crashes in particular), is it possible for an application to be notified if and until the device has been reset?

  Since I use information in the store of DURATION, and make clean up routine tasks, I would need to perform these tasks before the unit resets.

  See you soon,.

  Nik.

  SystemListener.powerOff ().

  RuntimeStore is allowed out right now too.

  Just referring to your previous question, for things like ApplicationMenuItems, it works really well.  If you add an ApplicationMenuItem and add it to RuntimeStore, you can detect whether they have been added by checking your RuntimeStore. And you have no need to remove to powerOff because it will happen anyway and your RuntimeStore is erased, keeping everything in sync without any effort on your part!

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Admin default device (Ganymede +)

  ACS 5.1

  Default device Admin

  Identity:

  One result (internal list and AD1)

  Group Mapping:

  Rule1: (anyone in AD/administrators = group/AdminGroup)

  Default: Standard user

  Authorization:

  Rule1: (no matter who in the Group/AdminGroup, allowed all orders)

  Default: refuse all orders

  Here's my situation:

  User1 (AD/administrator)

  UserBob (NOT in AD/administrator)

  User1 connects to a switch, type 'enable' is asked to authenticate again and can then execute all orders (this is what I want, if I don't like the second login)

  UserBob newspapers in a switch, type 'enable' is invited to authenticate again, but gets error "authentication error %" (I'm not UserBob even be able to connect to the switch first)

  So my question is:

  How can I keep UserBob to be able to connect to the switch?

  How can I get User1 to get into level 15 (switch # instead of switch >) automatically without having to enter their password a second time after typing "activate"?

  If I understand correctly, "Default Device Admin" is different from "Default network" that I compare to "connecting switches" vs "authentication server VPN or wireless" respectively.  So I should be able to prevent users to log into the switches, but still allow them to authenticate to access things like VPN, so I don't think that what I asked above will keep me from being able to do.

  Ideas?

  There is no NAR in DCC 5. Forget about it.

  Well, you authenticate the user, but not allowing him to all orders at the moment.

  You said that your default authorization rule returns "denyallcommands". It's good, but it must also restore the shell profile "deny access". That check?

• How can I connect to xbox live on xbox using Auntie Photon?

  Auntie photon is a huawei device (modem EC156 HSIA). Can we this modem with the XBox 360?

  Hi vaibhav,

  The Xbox 360 and original Xbox do not support this feature. For more information, you can visit the official Xbox forums to:
  http://forums.Xbox.com

• AUS auto fill device seems to not work.

  I'm running CSM 4.0.1 and followed the instructions on the use of CSM for updating a filewall ASA5540 through aus I created a policy to the CSM AUS IP address and credentials and chose "Peripheral" to deploy on.

  Page 1-3 of "Getting started with AUS", he says: when you use the Security Manager to deploy to a device via AUS configurations, the device is automatically added to inventory AUS once the device contacts successfully AUS and retrieces configuration. This is the normal method for adding devices. »

  FSU fails the attempt with this error message:

  CALLHOME-DB-DEVICE_NOT_FOUND: the Record for the unit with the remote control-ASA-1 ID is not found. Action: Make sure that the device has been added to the FSU and the configuration of device contains the appropriate device ID.

  And ASA (8.4.1) with active debugging device, displays this error msg:

  Client to remote-ASA-1 # Auto-update: DeviceDetails Envoy/setting to automatic update / AutoUpdateServlet of the 164.72.44.162 Server
  Auto-update client: treatment 164.72.44.162 Server UpdateInfo
  Auto-update client: failed to contact the: https://164.72.44.162/autoupdate/AutoUpdateServlet, reason: ErrorList error code: CALLHOME-DB-DEVICE_NOT_FOUND, description: save for the unit with the remote control-ASA-1 ID could not be found.

  He denounces the device ID is not found. But the host name of the ASA is identical to the device at the WSC ID.

  Is there something I'm missing or not do to make this work?

  Hello Jeff,.

  There are few things to make the FSU work, we will try to list and make sure that we have everything in place.

  1. we need to set up the device to let do via CSM aus:

  in the peripheral view select your firewall and configure your AUS server via

  Device Admin-> server-> AUS

  The ip address will be the same that the CSM and credential even allows you to connect to the server of CSM

  2 - deploy to the ASA to ensure this is the config AUS. The deployed config should look like:

  Auto-update hostname device id
  source/autoupdate/AutoUpdateServlet auto-update server https://*@

  3. ensure that the hostname of the device is EVEN under the display name in the CSM (you can check by right click on the device and click Properties of the device)

  4. we are now ready to set up the AUS server. Right-click on the device and select properties of the device. In the automatic update (bottom) section

  Fill in the fields by putting all the necessary information. The ip address and server name must be the same as the CSM (AUS runs on the same server)

  and the credentials are the same used to log in to the GUI CSM and used at the point 1

  5 - once this is configured, you are ready for the first deployment. It is important to deploy just as the CSM must create the right configuration file on the server of the FSU. After the first installation, you should be able to see the device listed in the portal AUS (under devices)

  Let me know if it worked.

  Stefano

• the idle device timeout notification

  Hi all

  I want to implement a listener that will be notified when the device has been inactive for x amount of time.  Another option would be to be notified when the screen will Dim.  I don't want to have to follow every movement of the press and dial key by myself. There must be some notification api for this.  The goal is that I want to display a password screen when the unit has been idle for some time.  This application has sensitive data and I don't want someone else to retrieve the device when the screen went dark and be able to look at the data in the application.  I need them to be able to reenter the password in this case.  Any ideas?

  Thank you

  Steve

  You can also implement SystemListener2 that has a method that is called when the backlight changes status.

• Access restriction configuration network devices with the level of the ACS 5.0 user

  Hi Experts,

  I have some configuration tasks TACAC with level of different user for all routers and switches,

  To further develop, I engineer, analyst and site engineers, so I want to configure centralized authentication with Annie tacac different levels for the various categories of network engg. Analyst, site engineer,

  can someone explain about how to proceed with ACS 5.2 and what configuration is required at the peripheral level.

  I'm particularly looking for the 5.2 acs configuration procedure.

  Looking forward to get the answer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/policy_mod.html#wp1076053

  In "default device admin" just create authorization rules.

  They should look like "If the user/group type = site engineer, then assign the shell profile X.

  You then define the profile of shell in the elements of policy and put in there all the privileges of your engineer to site.

  And so on for the other roles

• How to limit Ganymede user to logon to another device of base on the location profile group

  Does anyboby knows how to prevent a user from Ganymede to logon to another device? Our company has a manufacturing in many place around the world, and we wanted to keep all of our engineers based on their geographic location. For example engineers networks base on Asia is limited to access all devices located in the United States needs but we engineers access to all devices that are installed in different locations. I am using Cisco Secure ACS 5.3 and I am not able to do this. The test account I created which is belong to a specific group (i.e. ASIA) can connect to a set of devices that are located in the United States with read access but do not write access because of the restriction that I created. All I wanted is for this test user to block his access to these devices located in the United States.

  Well, lets assume that you have created two American and Asian communities

  you have defined two clients AAA US1 and Asia 1

  also, you have two identity of the groups USgroup and Asiagroup

  (1) If a user tries to access the peripheral USgroup Asia should be rejected

  (2) If a user attempts to access US Asiagroup device should be rejected as well

  other access

  If you need to customize the authorization policy in respect of the device admin access service

  to register the identity group and NDG:location where you can put in the result of the conditions

  What shell never set of profile or the command you want.

  Rule 1: Usgroup NDG:location y US grnat access to profiles of shell and command the necessary value

  Rule 2: Asiagroup NDG:location we Asia grant access to profiles of shell and set of commands necessary

  default: deny access

  ----------------------------------------------------------------------

  Please ensure good answers to rate

• ISE device administration authentication Radius possible?

  Hello

  does anyone know if the edge RADIUS authentication and authorization administration is possible with the actual release of ISE? I know that GANYMEDE will be available in future releases.

  Concerning

  Joerg

  Yes it is possible according to the "Ask the experts" forum

  --------------------------

  https://supportforums.Cisco.com/thread/2172532

  "If you use RADIUS for the administration of the system, ISE can be used using authorization policy elements that return Cisco av-pairs."  But personally, I think that ACS is currently superior to ISE for this task. »

  --------------------------

  In any case, I'm about to test "device admin" and "network access" at the same time in the same switch with Radius and ISE.

  Please rate if this can help

• Office Jet wireless signal interferes with the devices on the wireless network?

  I had our 8600 Pro Officejet more connected to a wired network, but the system administrator has remove the network because "the wireless radio signal is interfering with some of the laptops. Have you ever had this problem and how we can solve this problem? We love this printer (second level teachers) and I'd like to see it used again on the children's network can print from our iPads.

  Hello

  You might ask what is happening specifically with laptops? It would be rare to happen. Often, system administrators prefer devices must be connected. You could ask the 8600 to connect to a wireless router with an ethernet cable. This would disable the radio on the printer, but still allow access to the printer for mobile devices.

• vCAC apparatus and ID admin console launch java errors

  Since the upgrade from 6.0.1 to 6.1 (and oh what a joyful experience that was) I now have following error messages appearing on the vCAC and IDS devices admin pages: -.

  vCAC device > Admin: -.

  Request (getValues) no valid, action (query) or missing controller(<__main__.) Controller to 0xab95a8 instance >

  Device ID > Admin: -.

  Request (getValues) no valid, action (query) or missing controller(<__main__.) Controller to 0xab75a8 instance >)

  Device ID > SSO > newspapers: -.

  Request (logInfo) no valid, action (query) or missing controller(<__main__.) Controller to 0xaa5ab8 instance >)

  These errors do not seem critical for its not much but any ideas on how to clear this?

  See you soon

  Danny

  This problem seems to be just a result of browser caching.  When the tab services on the vCAC device showed as empty, a cache is restarted and erased cleaned browser error and all services appeared.  At the same point on the two error messages disappear just devices.

  Danny

• How to configure ACS 5.2 to manage the Junos 10.4R6.5 fwl via GANYMEDE.

  Hi all

  I have a camera ACS 5.2 newly installed, integrated with our announcement and his work with cisco product, routers switches and etc.  Now I would like to include Juniper firewalls so to be authenticated via ACS 5.2 either via ssh and web access.  Can someone share me how to initiate this, creating policies.

  FYI: I have 14:00 groups regionaladm and regionalops, read/write and read-access, respectively.

  Kind regards

  Marlon

  Marlon,

  I stuck in a config below file I made for our ScreenOS Firewall work with Cisco ACS v5.2.  This configuration may not work because yours is Junos, but it could bring closer you reach to understand.  Also, if you have not been on the Juniper J-Net ask autour, give it a shot. (forums.juniper.net)

  Good luck!

  -Chris

  Title: Example configuration - GSU of Juniper and Cisco ACS v5.x

  Product: SSG320M juniper (Cisco ACS v5.x)
  

  Version: 6.3.0r10.0 ScreenOS (Cisco ACS v5.2.0.26.8)

  Network topology:

  [Juniper SSG320M]-[Cisco 3560 Switch]-[Cisco ACS VM]
  

  Description:

  Goal - authenticate GSU administrators using GANYMEDE + instead of local connections

  Description - This configuration for Cisco ACS v5.x, JTACS had only configuration v3.3.

  ACS v5.x is a VM based on Linux with a completely new user interface and structure.

  Configuration:

  Configure the Juniper (CLI)

  1. Add configuration Cisco ACS and GANYMEDE +.

  Set id CiscoACSv5 of auth-server 1
  set the auth-CiscoACSv5 server ServerName 192.168.1.100
  set server CiscoACSv5-type of admin account
  set the server CiscoACSv5 auth type Ganymede
  Define auth-server CiscoACSv5 Ganymede secret CiscoACSv5
  define CiscoACSv5 Ganymede 49 auth-server port
  Set the server auth admin CiscoACSv5
  Set admin auth distance primary
  Remote admin auth root set
  define outer-get administrator privileges

  Configure the Cisco ACS (GUI) v5.x
  1. navigate to elements of strategy > authorization and permissions > peripheral Administration > Shell profiles
  Create the profile of Shell of Juniper.
  Click the button [create] at the bottom of the page
  Select the general tab
  Name: Juniper
  Description: Custom for Juniper SSG320M attributes
  Select the custom attributes

  Add the vsys attribute:
  Attribute: vsys
  Requirement: required
  Value: root
  Click on the [Add ^] button above the field for the attribute

  Add the attribute of privilege :

  Attribute: privilege
  Requirement: required
  Value: root

  Note : you can also use "read-write", but then the local admin does not work correctly
  Click on the [Add ^] button above the field for the attribute
  Click the button [send] at the bottom of the page

  2. navigate to access policies > Access Services > default device Admin > authorization
  Create the authorization policy of Juniper and filter by IP address.
  Click [customize] at the bottom right of the page
  In terms of customize, select IP address in the left window
  Click the [>] button to add
  Click the [OK] button to close the window

  Click the button [create] at the bottom of the page to create a new rule
  In general, the name of the new rule Juniper and make sure that this option is enabled
  In Conditions, check the box next to IP address
  Enter the ip address of the Juniper (192.168.1.100)
  Under results, click the [Select] button next to the Shell profile field
  Select "Juniper" and click the [OK] button
  Under results, click the [Select] button under the command field sets (if used)
  Select "allow all the" and make sure all other boxes are not CHECKED
  Click the [OK] button to close the window
  Click the [OK] button at the bottom of the page to close the window
  Check the box next to the policy of Juniper , and then move the policy to the top of the list
  Click on the [Save] button at the bottom of the page

  Audit:

  Connect to the CLI of Juniper and GUI using an ACS internal user account and try to change something to check the level of privilege.