AoE3 does not work on my Windows 7, even after a repair.

Similar Questions

• AoE3 does not work on my Windows 7 computer

  AoE3 and the expansion of the WarCheifs used to work perfectly on my Windows 7 computer, but recently, when I try to run the game, it begins to run (Ocwa logo appears on the screen), but then Windows tells me that it was an error and the program must close and just takes back me to my office. I already tried to uninstall and reinstall the two programs (and install the patches available on the Web site of the AoE), but it still does not work. What happened and how can I solve this problem?

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you have any antivirus installed on the computer program?

  2. are you aware of any recent software or hardware on the computer changes?

  You can update the display drivers and check if it helps. You can also try to run the game in compatibility mode and check.

  If the problem persists, you can start the computer in a clean boot state and check if it helps. Clean boot helps eliminate any conflict of third party software.

  Check if you are able to run the game. If the game works well if you have some incompatible software that could be causing the problem.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• game error: 2 zoo tycoon does not work on my windows vita he says I do not have enough system memory

  Tycoon Zoo 2 does not work on my windows vita it says I do not have enough system memory and I have a lot to run the game, I can't understand what is wrong

  ---------------

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows to this day does not work on my Windows 7.

  Original title: windows update

  Windows to this day does not work on my windows 7, the new facility. its valid correctly.

  Base on any relocation is to disable windows update search ("Never search updates", restart setting). Then install preferably a recent customer of update windows manually, KB3102810. From this point on windows update is used for the initial search.

  Best regards, VZ

• This device does not work properly because Windows... this device. (Code 31)

  Hello buddies, how to solve this problem (code 31)

  USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  How can I solve this problem?

  In addition, you can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.

• my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba, to no avail.

  my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba. but after downloading the drivers, when I run the winrar files, he said inexecutionable. Please help.also when I run the compatibility of the test program, it says the webcam application or incompatible, even if it worked very well earlier.

  See the help/support site Tosh or their forums.

  Have you recently updated of your drivers from somwhere system other than Tosh site or installed any new programs or perform any maintenance operation.

  Program compatibility test cannot be invoked

• Flash Player 21.0.0.242 does not work on Firefox 46.0.1 after installation of Windows 10

  Flash Player 21.0.0.242 does not work on Firefox 46.0.1 after the installation of 10 Windows on a laptop of Dell XPS 17 L702X. Continuously, it crashes. It works great with IE and Chrome.

  I tried the following:

  -Disabling Add-ons on Firefox

  -Do a clean installation of Flash Player

  -Do a reinstall of Firefox

  When I use "Flash Player Help" to check if Flash Player is installed, he said that my operating system is Windows 7. It is not; It's Windows 10. I used recommend it download when I looked at the Adobe Web site.

  What should I do to get Flash Player to work on Firefox?

  Thanks in advance for your help.

  
  

  
  

  I downloaded the 64-bit version of Firefox and Flash Player works now

  fine. I left the 32-bit version on my computer at the moment.

  Thanks a lot for your help. I really appreciate it.

• My colleague his computer was broken, it was Pentecost CS5.5 Pentecost installed upgrading pakket. now, I got a new PC I took me 3 days to discover that CS5.5 does not work on the windows 8.1 folks even 2 of the cat cant tel me that. now, I have installed

  My colleague his computer was broken, it was Pentecost CS5.5 Pentecost installed upgrading pakket.

  Now, I got a new PC I took me 3 days to discover that CS5.5 does not work on the windows 8.1 folks even 2 of the cat cant tel me that.

  Now, I have installed they pc new windows 7 of the Pentecost CS5.5 so should work on that. but after the installation of the upgrade CS5.5 does not show my CS5.5 pakket now I can't upgrade. and the last time it was Pentecost bij adobe support fixed a remote session bij adobe. now that?

  Problem solved by generating a new serial for Photoshop CS 5.5 key

  ~ Sarika