AoE3 does not work on my Windows 7 computer

Similar Questions

• System Restore does not work on my Windows 7 computer

  System Restore does not work for me on Windows 7 pro, he returns with a cancellation but does not either.  I have load a movie in movie maker and all the trouble started.  I couldn't finish the loading of the movie at that point, I started to have problems with the operation of windows.  End result, I tried restoring the system without success...

  Hello

  1 are you getting any error code or error message?

  2. have you successfullyperform before system restore?

  3. have you made any change before this problem?

  I would suggest trying the following steps and check if it helps.

  Step 1: search for errors in the event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 2: check if you are able to save the clean boot.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Step 3: security software temporarily disable and check if it helps.

  Disable the anti-virus software in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: After reviewing the matter, must reactivate the security on your computer program

  Also refer to:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Sebastian M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• AoE3 does not work on my Windows 7, even after a repair.

  I am trying to run Age of Empires 3. If I want to play AOE3 on windows 7 I like to help out the program. Troubleshooting always ends by not being able to find the file splash.exe. I then said to look for updates on the sites of games, however, microsoft has closed ESO and so there is no update. How can I get the game to run. I have a brand new hp p6207c-b. I have windows 7 Home premium. My processor is Pentium Dual-Core CPU ES300 2.60 GHz 2.60 GHz. My memory (RAM) is 5 GB. My system type is a 64-bit operating system. My windows product ID is _-OEM-_-_. With a 500 GB hard drive.

  Jake

  Jake,
  If you right-click on the game .exe file, then select Properties > compatibility set the program to run in Windows XP mode.
  If this does not help then you can visit this website: http://www.agecommunity.com/home.aspx they have downloads for the game and a forums page as well. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Model bag Clickfree Automatic Backup Device HD325 does not work in the Windows XP computer.

  Original title: BAG Clickfree Automatic Backup Device model HD325

  Cannot use the automatic backup device model Clickfree BAG HD325 on Windows XP.  It's a plug-and-play device.

  I tried to pass by and update the driver, but the wizard tells me there are no newer drivers available, and when I try to restore the driver tells me that there is no previous driver.  The USB port works properly and is the reading device.  I also tried to uninstall and reinstall the driver by using Device Manager, and the camera will not work properly.  The taskbar has said it malfunctioned, impossible to install correctly. and won't work properly, but after fiddling around by using the methods mentioned above, it says now that it is installed and ready to use, but the program does not start automatically.  I've been through to try to start the program manually, but it is not listed in the start menu or desktop.
  I also tried to add material using add new hardware, but it's not listed there either.
  I was able to use this program in the past, why I am no longer able to use this device?

  Hello

  You are able to use any other USB device on your computer?

  You can follow this link & check if the problem persists:

  USB port may stop working after you remove or insert a USB device

  Hope the helps of information.

• Why installed Photoshop 10 does not work on my Windows 7 computer?

  I got Adobe Photoshop Elements 10 installed on my Windows 7 machine.  Had to wipe the hard drive and reinstall everything.  Elements installed without problem, but does not open.

  uninstall,

  Run the vacuum cleaner: http://www.adobe.com/support/contact/cscleanertool.html

  then reinstall.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• LEGO chess game does not work on my windows vista computer. It ran fine on windows XP. What should I do?

  LEGO chess game loaded without problem on windows vista, but whenever my son trying to play, it says: "Please insert the legochess CD-ROM into the CD drive.  The disc is already but it just repeats the message?

  PS: I am a shareholder of Microsoft and so disappointed with Vista.  Give me XP!

  Try this link. There is a patch to correct this problem by the creators of this software.

  http://support.Selectsoft.com/products/L/LNLEGCHESJ.htm
  (Copied from above link)

  Question	I try to run the program, but a message "insert disk" always comes to the top. The software seems to be installed correctly.
  Description
  Solution	We have a patch for the failures of Lego that should solve the problem of "no CD in the drive". It is currently available for download on our site here: chesscdfix.exe

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• game error: 2 zoo tycoon does not work on my windows vita he says I do not have enough system memory

  Tycoon Zoo 2 does not work on my windows vita it says I do not have enough system memory and I have a lot to run the game, I can't understand what is wrong

  ---------------

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows to this day does not work on my Windows 7.

  Original title: windows update

  Windows to this day does not work on my windows 7, the new facility. its valid correctly.

  Base on any relocation is to disable windows update search ("Never search updates", restart setting). Then install preferably a recent customer of update windows manually, KB3102810. From this point on windows update is used for the initial search.

  Best regards, VZ