AP check printing: position the check at the bottom of the page

Similar Questions

• HP 4700 only prints half the page

  HP 4700 only prints half the page

  Hello-

  Have you tried uninstalling and reinstalling the printer?

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

• "prints" but the page is empty

  My hp officejet 6110xi all-in-one that seems to work fine, but after the 'printing' the page comes out blank. I tried a hard reboot and have gone online to make a diagnosis of HP print - the diagnosis has not detected a problem, but when I printed the test page, it was empty.  Any ideas appreciated!  Thank you

  Probably your cartridges have dried, perhaps due to power the printer before removing the cartridges were lucky to the Park.  Try to run the three cleaning cycles to the Toolbox, as described here , then try to print a page of test, as described in this page.   If there is any suspicion of printing (even a few strands) then the electronics is OK.  In this case a more thorough cleaning cycles can help.  If this isn't the case, then soak the print head in about 1 "of very hot water for 10 minutes or if can wipe the nozzles.

  If there is still no sign of printing, this may indicate a power failure of the electronic control unit of printer.  You can check the cartridges dabbing them on a damp cloth.  A good cartridge will leave a dark spot of cyan, magenta and yellow or black according to the cartridge.

• HP Deskjet f-4272 all-in-one: how to disable printing of the Page number?

  Hello!

  My printer always prints the page at the bottom of the pages numbers. How can I disable that?

  I use Jarte - free version - which is like WordPad, but with more options such as the spelling checker and the number of words. By default, it is saved as a WordPad document, but by right clicking on the document before you open it (in the list of Documents), the option to open it in Jarte and vice versa.

  I found the settings to disable printing page number to this topic in WordPad and Jarte:

   

  In the WordPad document: file > Page Setup > Print Page numbers > (uncheck) > OK.

   

  In the document Jarte: file > Page Settup > header & foot > print header and footer >(Uncheck it) > OK.

  Thank you very much!

• Print too small to read from the printer to the Page shrink on 30%

  When printing on Xerox 7225 e-mail, printing is too small to read even with retractable page on 30%. last email is from an AOL account and wrap the header lines. This problem is new.

  Select the e-mail
  'File' > 'Print Preview '.

  You can change the font size by changing the 'ladder '.

  increase level to increase the police.
  so start by selecting: scale = 100%
  When everything looks correct, click on the button 'print '.

• HP deskjet 1510 prints only the page displayed in email

  HP deskjet all in 1 print only displayed page in email. Solved.

  Hello @Jaxtuff,

  Welcome to the HP Forums!

  I understand that your 1510 Deskjet prints only the display page in your Email. I will do my best to help you! What do you mean by electronic display? It is only printing a certain body of this Email? Could elaborate you more on this? I need to know your operating system on your computer? Windows or Mac?

  How is the printer connected? USB or wireless?

  What type of browser Web are you using and what type of e-mail?

  Please verify this information and I will help you. Have a good night!

• How to print in the page margins when printing to HP Envy D410a iPad?

  When I try to print something the iPad, either the 1 or the 2, the result is the image sent from the iPad is without border print, resulting of course in certain parts of the print had fallen, is there sort to resize the impression through the printer, since the iPad is not drivers?

  In addition, I seem to have a similar problem when printing from my PC, in case it's printing resulting is smaller, it seems to print to a margin size of 1 "on all sides. The only app I've found I can substitute it's Adobe Reader who has options to scale the page.

  Any suggestions will be appreciated. TIA.

  Stephen.

  You can download the software of HP iPrint to change margins & borders:

  http://support.HP.com/us-en/document/c01616126

• My fairly new Epson WF-2540 is nothing prints on the page, although it pulls the paper and it looks like it's printing, producing a blank page

  The properties show the levels ink because at least half full and I tried to realign the print heads, but still gets the same result.

  This was a new printer and printed a dozen pages before printing, it stopped.

  Hi Anita,.

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

  Method 1
  Try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  Clear printer spooler files and activate the spooler service
  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on Print Spooler serviceand then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, refer to the article below.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 3

  To identify and fix common printer problems in Windows, including print errors, errors of spooler for printing and other issues that could prevent you from printing, see the article help.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• HP Deskjet 2540: How to print only the Page showing

  How to fix my printer to print just what is on the screen?

  For example, I am trying to print the list of the NBA team, which shows on the screen, but when I hit print, it prints five pages and the list is divided between the last two pages.

  I used to have a nice little program, years, called "Print Screen", which I was allowed to do, but it became obsolete.  My HP 2540 is new and I have the CD with any software.  Is there something out there that will help you?  TIA

  D-S-N

  Thank you banhien, but as I mentioned in the post, the list was divided between two pages when it print so choose page I was only half of the team.  However, I found a solution, provided by HP and ready to install.  I remembered a window asking if I wanted to install "HP Smart Print" shortly after I installed my new printer to appear.  I didn't know what it was, I went on it.  I shouldn't, because it's actually the version of HP of the old program 'Print Screen'.

  It allows you to choose from, with the mouse, the entire page or a part of the page, preview and enlarge (up to 200%) or to reduce and print any number of pages you want.  Really great!  I found it waiting to be installed in 'Tools' on the menu of Office Windows 8.1 under "HP Smart Print 2.1".»  As soon as it is installed and I went to the for use, he informed me that there is a 'Smart Print 2.7' update available, I did, it only took about 30 seconds and he was.  It works perfectly.

  A second solution is to go out tomorrow and buy another victory. 8.0 HP keyboard, to replace my five-year-old wireless keyboard HP Deluxe Desktop which is supported only through Win XP and who does not the "Prnt scrn" button  I guess it is old 32-bit and 64 - bit.  Hitting "ALT - Prnt scrn" used to work with XP and earlier operating systems.

  Dennis

• How to position the page element?

  Hello

  I created a report in the same region, has also created a page element in the same region. The page element is now on the top of the report, but I need to show in the report. How can I achieve that?

  Thank you

  Victor

  Depends on your version of the apex. 4.1/4.2ish there is an attribute on the region of the "Position of the display element.

  Enter this below content.

• You can print only the pages from the specific master page?

  I'm laying a big enough technical book using InDesign CS4 and need to print evidence of pages that use a specific custom master page. Rather than scroll the window to the Page and write the page numbers that use this specific basic form, I would have a quick way to do it. If someone knows a way to do this through script or other means, I would really appreciate the help. Thank you!

  NOTE: Originally posted in general, discussion, and recommended it to the forum script.

  Straight to the point, it seems to me. Commenting on a wide was free, today.

  // Gather Master Spread names
  masterlist = app.activeDocument.masterSpreads.everyItem().name;
  // Create a simple yet effective dialog
  masterDialog = app.dialogs.add ({name:"Select Your Master",canCancel:true});
  with (masterDialog)
  {
            with (dialogColumns.add())
            {
                      with (dialogRows.add())
                      {
                                listbox1 = dropdowns.add ({stringList:masterlist, selectedIndex:0});
                      }
            }
  }
  
  // Get input
  if (masterDialog.show())
  {
            selectedName = masterlist[listbox1.selectedIndex];
            // Build Print string
            pages = [];
            for (i=0; i		   

• Print only the Pages with the data

  Hi, is it possible to print only pages of a form with completed field data?  I know that you can select pages manually, but are - it possible for the software to recognize that a page has data entered so impression?  Thank you

  Yes.  You must write a JavaScript routine that would go through each page, then every field on every page and check if the value of the field is empty or not.

  There are programmatic ways to do so.  The Acrobat JavaScript reference guide is your friend.

  JavaScript for Acrobat. Adobe Developer Connection

  Thank you

  Doug

• Firefox won't print to the page since the update of today. Why? I can always print from Thunderbird and know

  should I expect to get a solution to this problem?

  I have re installed Firefox 3.6.12 and get the same result. It does allow me to print a page. When I pull down the preview before printing all I get is a grey screen. Help!

  Sometimes it is necessary to reset all preferences of the printer does not work properly, Pref for other printers should not need to be reset.

• When l try to print a PDF from adobe a message says its impossible to print, because the pages have not been selected. the pages are selected, but still does not print.

  l ran a diagnostic diagnosis and the printer works fine, did a test print, no problem.

  l am trying to print a PDF from adobe and it don't print, said did not select pages to print. l selected pages and still nothing.

  Hi Mary,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems when printing PDF documents. I will certainly help you in this matter.

  1. What is the operating system installed on your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Resolve PDF printing problems. Acrobat, Reader

  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.