AP groups with anchor comments

Similar Questions

• Scrolling group problem: not all the group with scrolling content?

  Helloooow peoplez script wise.

  I was biting my nails on this problem, the last two days and still have not found a solution. Go here:

  I tried to make a window (or Panel actually, because ultimately it must be run from the EI > window > scriptname.jsx), with a scroll bar, which can scroll content in a group beside him. I can get the scroll and all group, but is the problem, just now, that the elements of x in the group, the last get cut. Like this (it is supposed to be 500 buttons):

  

  The only way that I was able to get the 'internal' group grow is by not using do not align properties and manually set the .size. I know that the content is here because the last element arises, when I move the last location of points [1] upwards until he reached the top of the group. I tried to refresh the page layout (layout.layout (true); layout.resize (()) to each call of the function onChanging() of the cursor, but without success. Read a lot of forum posts beautiful and discussion by @Marc Autret and other users of scriptUI/extendscript long has this far been without success.

  TL; DR: I'm doing a group with a lot of content that I can scroll with a scroll bar.

  Here is the code snippet, I hope fairly well commented:

  {
  //scroller test
  // uncomment the temp path (replace with some image file path) and the lines inside the populateGrid() function to reproduce my problem better
  // I'm ussing an image 512x288 pixels
  
  
  //var tempPath = "/Volumes/Verbinski/02_SCRIPTING/After_Effects/stockholm/ROOT/EXPLOSIONS/Fireball_side_01/Thumbs/Fireball_Side_01_024.jpg";
  
  
  // create window
  var mWin = new Window('palette');
    mWin.size = [500,500];
    mWin.orientation = 'row';
  
  
  // If you like it, then you better put a scroller on it.
  var scroller = mWin.add('ScrollBar');
    scroller.size = [20,mWin.size[1]-40]
    scroller.minvalue = -5;
    scroller.value = scroller.minvalue;
    scroller.maxvalue = 10000; // tried changing this to all sorts of interesting numbers.
  
  
  //This should move the group, created further down.
  scroller.onChanging = function(){
    grid.location = [grid.location[0],-scroller.value];
  }
  
  
  // "Boundary" for grid (see below)
  var gridArea = mWin.add('panel',undefined,'gridArea');
    gridArea.size = [mWin.size[0]-40,mWin.size[1]-40];
  
  
  // The grid... a digital fronteer... and also container of stuff
  var grid = gridArea.add('panel',undefined,'grid');
    grid.size = [gridArea.size[0]-20,9000000000] // no matter how high I put this, it doesn't change a thing
  
  
  // Just an array for all the images to go
  var clips = [];
  // Total height gets calculated in the populateGrid function.
  var totalHeight = 0;
  
  
  function populateGrid(rows){
    var img;
    for(i=0;i<rows;i++){
    // img = grid.add('image',undefined,tempPath);
    // clips.push(img);
    grid.add('button',undefined,i);
    }
    for(i in clips){
    clips[i].location = [0,(clips[i].image.size[1]*i)]
    }
    // totalHeight = (img.image.size[1]+grid.spacing)*rows;
    // grid.size = [grid.size[0],totalHeight]
    // scroller.maxvalue = totalHeight/2;
  
  
  }
  
  
  // put x number of buttons/images into the grid
  populateGrid(500);
  
  
  // shwo to window
  mWin.show();
  mWin.center();
  }
  

  Reaally hope someone here sees this and can help out me.

  Cheers, Fynn.

  My Control Panel:

  retina 5K, 4 GHz Intel Core i7 iMac

  32 GB of RAM, 512 GB SSD HARD drive

  OSX Yosemite: 10.10.4

  AE: CS6 |  CC 2014: 13.1.1.3

  Aaalrighty, guys. It seems to me have cracked... Sort of...

  David, your version worked quite well, I just modified a bit to get the right calculation.

  The wheel now works as expected and the scroller.maxvalue is calculated as ((number of items) * height of the first item).

  Everything works fine until I have started using the automatic layout manager. The option 'fill' at least makes it really hard to understand the final height of the internal objects. So they must be defined accordingly.

  Indeed, here is my modified code (sorry, @David for resources according to the version string, you may simply copy the scroller.onChanging () and populateGrid() x parts))

  {
  //scroller test
  // I'm using an image of around 512x288 pixels
  
  var tempPath = "YOUR IMAGE HERE";
  
  // create window
  var mWin = new Window('palette');
    mWin.size = [500,500];
    mWin.orientation = 'row';
  
  // If you like it, then you better put a scroller on it.
  var scroller = mWin.add('ScrollBar');
    scroller.size = [20,mWin.size[1]-40]
    scroller.minvalue = 0;
    scroller.value = scroller.minvalue;
    scroller.maxvalue = 3000; // tried changing this to all sorts of interesting numbers.
  
  //This should move the group, created further down.
  var scrollDiary = 0;
  scroller.onChanging = function(){
    var scrollVal = Math.abs(scroller.value)-scrollDiary;
    for(i=0;i		   

• Photo constantly order of photos in a slideshow changes no matter how many times the movements of the user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this o

  Apple Photo 1.3 serious problems - how can I SOLVE all these problems?

  (1) breaks down without rhyme or reason no matter where I am in the workflow.

  (2) pictures will not be Shut Down Every Time, even after several days of waiting.

  (3) aPhoto frequently badly chooses picture in the EDIT picture option, I get a picture different than the one I clicked on which is on a 100 pictures in a row.

  (4) picture constantly order of photos in a slideshow changes no matter how many times the movements of the end user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this weird behavior! Is there a way to stop this? If I drag the photo again some 7 additional photos in the slide show, after a minute or less, he appears again to where it was it not. !@#$%$#

  (5) If you make any CHANGES to a photo, it often changes the appearance of your complete slideshow of this picture with impatience. So you lose all this not work fix your configuration of the slide show. Even changing the order of photos once more that I had put back where they should be. !@#$$#@

  (6) photo identifies often shades of lamps and long door handles as the faces of the people.

  (7) photo made bad decisions when it comes to brightness, contrast and colors effortlessly around other than to use other software, where as with iPhoto there was a lot of workarounds. I could continue, but will save one who might be reading of this.

  I am up to date on all updates for my Mac. If anyone have REAL answers so please spilling the beans, but according to me, it's the only truth is that Apple has rolled out a product inferrer to replace an exceptional product, called iPhoto, which does not work on my new iMac computer 5K of 27 ".   If I knew what I would have chosen another computer that I use iPhoto to prepare more of fifty to sixty thousand photos in a given year and I use iPhoto to make hundreds of slideshows from it.  Are there plugins for Photo 1.3? I ask because I see where there could be Add-ons, but I can't find.

  Apple has taken a serious decision by turning his back to iPhoto and tens of millions of loyal users.

  Thanks in advance to anyone brave enough to tackle this job.

  James

  First, back up your library of Photos and hold down the command and option keys while launching Photos - repair your database - you have a corrupted database

  LN

• Cannot create a smart group with three conditions

  When I create or edit a smart group, I can specify one or two conditions. But if I try to add a third condition, no third line is displayed, even if the OK button goes grey as if a third line were appeared containing a partially specified condition.

  Does anyone of you can create a smart group with three or more diseases? I can't.

  You need to scroll to the bottom of the list of criteria to see one after another. The window is not resized.

• Creating security group with grants decided in active directory - Server 2003

  Hello

  I need to create several different security groups for about 7 users with grant different access rights, but all users will access the same folder main and some of the same void records. I created a group with some of the users but appear to have access to all the folders there particular subfolder but I only want to have access to some of the folders in the selected subfolder.

  I guess what I'm asking is how do I create groups of different security with grants decided for each groups and ensuring that users in these groups only have access and subsidies to certain folders.

  I don't know if I explained myself properly but I certainly confused myself, I hope someone can point me in the right direction to solve this problem.

  Thanks in advance

  Jah

  Jah,

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.
  
  Thank you.

• I can't send an e-mail as a group, with or without an attachment, I always get error 0x800CCC0B the message, I have outlook express.

  cannot send error 0x800CCC0B group

  I can't send an e-mail as a group, with or without an attachment, I always get error 0x800CCC0B the message, I have outlook express (not sure which version) under XP, I used to be able to send a group with 500 more emails in it, I tried to narrow the group to 200, but it makes no difference can anyone help?
  Check out this link. Apparently there is a max of 100 recipients simultaneously and they also will disable your account temporarily if you try many times.
   
   
  http://help.virginmedia.com/system/selfservice.controller?CONFIGURATION=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&USERTYPE=1&VM_CUSTOMER_TYPE=&CMD=VIEW_ARTICLE&ARTICLE_ID=75643&RELATED_ARTICLE_CLICK=1&RELATED_ARTICLE_NAME=Sending%20limits%20in%20Virgin%20Media%20Mail

• NAC integrated with the comment server

  Hi all

  I met a problem that happened when I joined NAC with the comment server.

  Hope I can find the solution here!

  When I create an account to the comment server, the account will be created in the NAC as a local user.

  If I chose "time profile - start-end", the account will be created in the NAC.

  But if I chose "Time profile - first Login", the account will not be created in the NAC.

  If the guest cannot connect with this account using "time profile - first Login.

  All configurations of the document including "Radius Client and Accounting" has been correctly configured.

  But I can't yet find the solution.

  Please answer me if you know the answer. Thank you very much!!!

  Jet Li

  If Taiwan

  Hi Jet Li,

  This should be because only based on time with beginning and end is supported when you turn on the END with the NAC Appliance solution:
  http://www.Cisco.com/en/us/docs/security/NAC/guestserver/configuration_guide/20/g_guestpol.html#wp1063409

  "Cisco NAC comments Server Version 2.0 supports only start/end and creating profiles when used with Cisco NAC appliances"

  Kind regards

  Fede

  --
  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

• Problem with anchor points, shifts vertically in the browser view. What is the problem?

  Problem with anchor points, shifts vertically in the browser view. What is the problem?

  have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header

• I downloaded Lightroom 6 today (single license), but when I try to put in place, it is blocked with the comment "product installed only on a 64-bit system.

  I downloaded Lightroom 6 today (single license), but when I try to put in place, it is blocked with the comment "product installed only on a 64-bit system.

  Hi Fred,.

  6 Lightroom requires Mac OS X 10.8 superior, or a 64-bit version of Windows 7, 8 or 8.1. See the system requirements for Photoshop Lightroom for Mac OS and Windows

  It could be useful!

  Kind regards

  Shelly

• Personal warping of music with anchor points?

  I need to get a model of very specific chain with a musical score (2 measures). When I take the steps and back up I can use string functions that do not include a precise control. I would like to take 2 measures, like a 'flag' warp and twist with anchor points, but this does not seem possible. Any help?

  Make art artbrush out of it. Draw a curved line, and then apply to the brush.

  You can also refine a deformation of the envelope using the gradient mesh tool. But it does not work when you apply the deformation under effect. It only works when you apply good object > envelope.

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• Edit "Sync time with host comments" on several virtual machines by PowerCLI

  Hi people,

  In my vSphere Cluster (Version 5.1), I have about 70 virtual machines in a resource pool named 'RP_nonProd '.

  Now, I need activate 'Time of Sync with host comments' on all these VM in the pool of resources mentioned.

  I figured out, that with the following command:

  Get-ResourcePool | Where {$_.} Name - only 'resources'} | Select Name, @{N = "NumVM"; E={($_ | Get - VM). County}} | Name sort

  I am able to get a list of coma separated from all virtual machines in the resource pool. Unfortunately, I do not know what command allows me to change "Time of comments with the sync host" above PowerCLI.

  I know, that there is an object called "$spec.tools.syncTimeWithHost = $true" that you can configure for real, but I don't know, how to write a simple script with this function.

  So any help will be accepted with gratitude.

  Greetings

  Marc

  Try something like this

  $VMS = Get-VM -Location (Get-ResourcePool YourResourcePool)
  
  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec $spec.Tools = New-Object VMware.Vim.ToolsConfigInfo $spec.Tools.syncTimeWithHost = $true
  $VMS | %{
    $_.ExtensionData.ReconfigVM($spec)
  }
  

• Drop-down menu used with anchor on the long table of data links

  Hello

  I have a page on our site where we used a drop shape with anchor tags to let the visitor easy access to specific locations within a long table of data on the same page. Recently, I noticed that the anchors are walking around is no longer the tags in the page but only the beginning of the table anyway. I don't know if over time a few additional codes may have been added to the page that is not in conflict with the form of drop down menu, or if it's something else. I've been agonizing about this for awhile now and unable to fix. I'm hoping a new set of eyes will revisit the issue. the url is http://www.vectron.com/products/saw/saw.htm

  Thank you

  Looks like there are a good number of errors html on this page, some of them have to do with using the code of the named anchor.

  Looks like you have placed the anchors between the openingand the child of the opening. Content cannot go there, move them in theTags and see if that helps.

  It could be something else however, html errors are one of the main causes of the problems of display/functionality. Visit the validator to http://validator.w3.org to clean up your errors. If you work with the code clean and correctly positioned anchors, after return and we can take a closer look.

• Problem with his comments before signing the PDF.

  Problem with his comments before signing the PDF.

  My problem is with sticky notes that I need to use my comments frequently.

  When I place my signature and save document commented, disappear all pop-up windows and icons of sticky notes go "flat" of the document.

  It's the same with all the annotation tools and pop ups disappear if I use them with.

  Is there a way to keep comments and pop-ups 'living' signing and recording after his comments?

  Fig 1: commented the document before you sign and save.

  

  Photo 2: after you save the signed document. Pop - ups disappeared and sticky notes are here to stay.

  

  Hey Tomi,

  It was a typo on the part of Ajlan. It was supposed to read "Lock after signing the Document. Please see the screenshot below. However, this check box only appears in the dialog box sign the Document If you sign the last signature on the PDF field. If you don't, it's because there are other unsigned signature fields.

  Steve