Pavilion HPE h8-1010cs: replace my grafic card

Similar Questions

• HP Pavilion HPE h8-1222: HP Pavilion HPE h8-1222 cannot find graphics card GTX970

  Hi I have a HP Pavilion HPE h8-1222, ReadonHD 7670 graphics card there if I bouth the computer. The craphic map is made and I bouth a new GTX970 of Zotac. I noticed that I need a new power supply and bouth Smart650W from Thermaltake. If I put the new installed in the system will not boot I get piep short (as if you just starting your pc) pause for 20-30 sec piep break new piep break again and pieps short 3.

  1-1-1-3 short.

  what I ludivine is too I can't go in the bios system if the card is in.

  the fan on the card everything is beautiful try my card by a friend and who has worked with him read a little and try to update my bios have immediately communicated FRIEND 7.12, 10/12/2011

  Here in hp, there is a newer version, I try to install that but nothing is happaning. The installation will tru and the system tells me the installation is done but nothing happens.

  Can anyone tell me how I can get this to work.

  Thank you

  Schmatrix, welcome to the forum.

  The problem you are having, it is that the video card requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released in February 2012.  You must contact the Technical Support of Zotac to see if they have a VBIOS update that will solve your problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

  Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

  Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!

• HP Pavilion HPE: Ability to upgrade the video card

  Hi I have a desktop HP Pavilion HPE h8-1100 AMD Angelica with a 300w power supply. The current map graphic is a Radeon HD 6450.  I want to upgrade to the best game card that my pc will support.  Any help and options would be greatly appreciated. Thank you much Happy New Year!

  Hello

  Looking for an opportunity 660TI GTX.  A CX600 Corsair or CS650m would be a good choice for a power supply.

• HP pavilion HPE-H8-1212: power upgrade graphics card is it useful?

  I currently have a HP pavilion HPE-H8-1212 with an AMD Radeon HD 7450 card with the standard power supply provided with the computer.  From now run many games on this machine with what graphics settings be better then adverage is a sad screen.  I don't need the best, but I was wondering if I could spend my power supply card and graphics mabye if need be to get the best out of this small computer for gaming?

  Does anyone have suggestions on what chart cards (best I can go) that are compatible with this machine as is?

  And/or what power upgrade level to if necessary to install a better graphics card - and which cards would be these (even better cards that would work on this machine)

  Thanks for any info

  Follow the advice given by Big_Dave Expert HP in the following thread.

  http://h30434.www3.HP.com/T5/desktop-hardware/HP-Pavilion-HPE-H8-1212c-graphic-card-compatibility/TD-p/3820114

• Pavilion Slimline S5510y: HP Pavilion Slimline s5510y and replace a video card

  I have an original s5510y Slimline with Windows 7 Home Premium and upgrade to Windows 10.  I need to replace the video card (GeForce 6140se nForce 430) who seems to be integrated into the motherboard.  I'm trying to replace it with a nVidia GeForce GT610.  As instructed, I need to change the BIOS to use the PCI Slot.  How can I change the BIOS?  I guess I need to do before installing new video card.  Any information would be greatly appreciated.

  Hello

  Do not install the NVIDIA 610 but rather to review the information below.

  Review this thead element and in particular post #10.

• Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops

  In order to improve my graphics performance for games that I invested in this graphics card:

  NVIDIA gtx 950, links shows the map and specifications:

  http://gadgetsngaming.com/2015/08/21/nVidias-GTX-950-at-160-easily-beats-750ti-in-1080p-gaming/

  How fitting the screen stops at initial HP logo and "press ESC to start menu.

  I can also clearly see that disk hard fails or starts the Windows 7 Edition operating system home premium.

  I am running Nvidia GT 630, and back on this card machines works well again.

  It just loks like the new graphics card prevents the hard drive to run.

  All attached cables (power cable 6 pin) and locked firmly into the PCI slot.

  Is it possible that the new card draws so much power that it prevents the hard drive of the race?

  When you press ESC, it seems that the hard drive is registered in the Bios.

  This nvidia gtx 950 is better? It seems to be more the size of the one I have - nvidia GT 630. Link shows specifications.

  http://videocardz.com/NVIDIA/GeForce-900/GeForce-GTX-950

  *

  First of all try to help me, please do not write that I should get a new machine - I thought that, despite this current have worked without any problems for 5 years now.

  Do not forget that I have to install a lot of programs and to transfer other data - it would be nice to avoid this.

  If if can not be fixed - which stationary HP desktop computer (I have a laptop) can have the new nvidia gtx 950 mounted?

  http://store.HP.com/us/en/PDP/desktops/HP-envy-Phoenix-810se-desktop-j6n64av-ABA-1

  or this

  HP Pavilion Desktop-500-585no

  Thanks in advance

  I'm not familiar with current PC for sale, regarding upgrades.  Since is considered a new HP, try looking at the list of options on the HP website.  Most higher end PC have the options that you choose before buy you, to customize the generation.  Choose a model with options that match your criteria now and notice the upgrade options - write down them - to avoid confusion later.  OR go with a customized version, but this could mean significant spending.  It is the hand off the coast between prebuilts and personalized.

• HP Pavilion HPE h9-1130 Phoenix: upgrade video card

  My uncle has improved its EVGA GeForce GTX 960 video card 4 GB SSC GAMING ACX 2.0 +, whisper quiet cooling w / free installed back Graphics Card 04 G-P4-3966-KR. I'm not a computer genius and have done my research on why it won't work. We have made the driver updates. Its current specifications are http://h20564.www2.hp.com/hpsc/doc/public/display?docId.... I know that wasn't the best choice for him but I don't know why it is not compatible or does not work. The recommended power supply is 400 Watt and it has a 600 Watt

  The original computer was WIN7, circa 03/2012, with a BIOS rev 7.16.  It is not scalable to rev8 UEFI BIOS, what is needed for new graphics cards. Your only choice is to find a riser, or with Legacy/UEFI BIOS switch.

  This list is not complete.

  Known with the switch cards UEFI/Legacy includes these maps:

  (1) MSI 750TI read here

  (2) by @erico, ther7 260 and higher cards and the 360 r9and cards higher.  In these cases, please check by contacting the manufacturer.

  Only the old cards. These are older cards, but excellent performers are:

  (1) EVGA GTX 660 and 670 EVGA GTX

• Pavilion HPE h8-1040 Desktop: update video card in office h8-1040

  Hi everone, I have a desktop computer h8-1040 I want to upgrade the nvidia gtx 550 ti a nvidia gtx 950 video card

  card if possible? The computer has intel i7-2600 processor 3.40 ghz, 10.0 GB of RAM, 460 watt power supply,

  Operating system is Win 7 (64-bit), motherboard is an IPISB-CH2 (Chicago) made by Pegaton. I would like to buy proberly a basic

  model gxt 950 cards to avoid having to change the power supply... but if I have to I will change it also.

  All tips will be greatly... APPRECIATED!

  Hello

  The NVIDIA GTX 950 requires the motherboard support UEFI and your PC does not have UEFI support.

  The NVIDIA GTX 660 should work on your PC when matched with the right kind of food.

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• HP Pavilion HPE h8-1205eo: should I buy a new wlan card?

  I think that my Hp Pavilion HPE h8 - 1205eo:s wireless network card is broken. I can connect cable trought and everything, but he can't find any network without cable. I think I need a new card. I have a question before I go to things, might like wireless usb adapter work? Or do I have to buy a new card wlan? It would cost a lot less here where I live if I could buy a usb adapter... Thanks in advance.

  Good then the problem was with my wireless card, or should I say it was my fault. When I put on my new graphics card I accidentally pulled out the antennawire of my wireless network card. And now I feel very stupid but yes problem solved and all is good and working.

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion HPE h8-1111: Deffective WLAN Card

  I've had a few confusing issues with my internet connection for a few weeks now:

  My computer seems to detect wifi networks (they appear in the Network Manager), but fails to connect because of an unknown factor.

  Basic troubleshooting informed me that wifi wasn't the issue (other devices could connect to) and it turns out that my computer could sometimes reconnect by mmee after a few hours (weird right?)

  This time it does not resolve itself. I tried to update my WLAN card through my laptop adapter, so the drivers via a USB key. Nothing worked (maybe bad drivers?) I've tried a few)

  My network card is a mini Broadcom 802.11n using magnetic antennas of the card. (youd cloth found in a laptop essentially...) I have little or no knowledge more than I could translate from the web on this kind of hard\software. I am at a loss.

  [Also, I've seen a few threads recommending the driver intel update of software, but it needs a connection to work its magic...]

  Hi @arnaud34,
  
  Welcome to the Forums of HP Support! I understand that you have problems with your wireless connection and I'm happy to help you.

  Is that something WLAN adapter that you added or the original map?

  The Support page and drivers for your computer model: PC desktop HP Pavilion HPE h8-1111

  I would recommend that you try the following to see if you can get a stable connection. If at the end you still have nothing so it may be that the card is bad, and a replacement is necessary.

  Troubleshooting your wireless network and Internet access (Windows 7)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion HPE-310 t Power Supply replacement - please help!

  OK, so I have a Pavilion HPE-310 t, (MS-7613 (Iona-GL8E) motherboard) and I want to replace the original PSU (300 watt) for a 500 watt so I can install a better video card. I looked at the harness and they look like I can put in a general diet something like this:

  http://www.Walmart.com/IP/13812566?adid=22222222227000381035&wmlspartner=wlpa&wl0=&WL1=g&WL2=&WL3=13...

  If im wondering if the gneral supplies will fix the case... Thank you very much

  Yes, the Thermaltake TR2 500W ATX12V power supply you linked to should fit in your computer case. Also consider the Corsair CX500 and CX600. Two of these power supplies are highly recommended and are known to fit in many cases of HP computer.

• HP Pavilion HPE 1090 t: could someone help me please... Desktop HP Pavilion HPE h8-1090 t CTO - PSU replacement/compatibiliy

  I just bought a new power supply (Corsair CS650M) because someone has suggested that it would be a good replacement power supply for my HP model which is HP Pavilion HPE 1090 t.   I need to know if this Corsair works and is compatible with my system, because something is not working with him directly or I did something wrong.    This is my first install and when it comes to the ins and outs of power amplification entry & exit and amperages I get so confused about this stuff.   But I think I took all the pluged connection correctly, at least when I re-plugin my old PSU after the installation to fail, I had the PC working again, what made me give confidence that I did the Corsair install correctly.  But what happens is after the installation of the unit from Corsair and turn the system he clicked power off after about 10 seconds or more and then restarted after a few seconds, then stopped again and turns off after another 10 to 15 seconds, and nothing would come up on top of the screen no more.   The first time I did the research what PSU would be compatible, I was getting conflicting results with a few places on the net saying that the majority of the HP out there (excluding some models such as the slimline) could be replaced by different manufacturers and higher power PSU, while other places I looked different.   Even the person who recommended me this power supply said in his post that he installed a Corsair HX650 model in its HP PC, and it worked very well for him.  Now, after the failure of the installation for the next few days, I did a lot more research and when I went on the site of HP and looked up the specifications of the model my PC I noticed under the power supply section, he had a heading that says "must select one of the following options" (in fact most of the different sections shows that the title too) and then he showed only two options 460W and 600W.  Then he asked me if it's the only option I get with my model.  And then I looked at my model number HP on the HP PartSurfer and under the section of the PSU, it also registers only 460W and 600W.   So who is?   I have to stay with only these options two HP or can I get a power supply with a higher power a bit then 600W from a different manufacturer that is what I want.    If I can get something that is compatible other than the options listed HP please let me know, or if this Corsair should work someone please let me know.   I need to return it otherwise.    My specs are below.

  Thank you Aaron

  HP Pavilion HPE series
  Model No.: h8-1090 t CTO Desktop PC

  Name motherboard manufacturer: IPMTB-TK Pegatron HP/Compaq name: Truckee

  PIC of the motherboard link: http://support.hp.com/us-en/product/HP-Pavilion-HP E-h8-1000-Desktop-PC-series/5080764/model/5117795...

  Original HP installed: AMD Radeon HD 6570 (Bronco) graphics card 1 GB Model: 648533-001, SP # 659355-001

  Link video card PIC: http://www.ebay.com/itm/111761368505

  Nothing has been added/modified recently real system.  Last change was the beginning of the year 2015, which was a new 2 TB HDD and added however problem memory only started about 3 weeks ago.  The Interior has been cleaned (diffuse can)

  600W Μatx Estar v5 HF PSU (Petrus)

  Information about the current hardware out of the Power Supply Unit

  Switching power supply
  Model: DPS-600WB A
  Part number: 633186-001
  600W power MAX

  Output: DC output rating (new Corsair PSU)

  + 12Va = output DC 16A = + 3.5V / + 5v / + 12v /-12v / + 5vsb

  + 12Vb = 18 a Max Load = 25 a / 25 a / 51 / 0.8 a / 3a

  + 12Vc = 12 a Max comb = 130W / 612W / 9.6W / 15W

  + 12Vd = 10A power Total Power 650W

  + 16 5.08V = side of AC input

  + 3, 3V = 15 a AC input: 100V - 240V

  + 2 5.08Vsb = current: 10A - 5A

  -12V = 0.3 frequency: 47 Hz to 63 Hz =

  Entry:

  100-127V ~, 50-60 Hz, 10 a

  200 - 240 v ~, 50-60 Hz, 4A

  You are welcome.

  Although there is a limit to the amount of power that is needed to power your computer, it uses only the amount of power it takes to power the computer correctly.  The extra power is kept in reserve for the purposes of art.  Thus, you cannot really bad the computer with extra power or amperage.  You can sleep on this point.

  Indianaak wrote:
  

  Thank you very much for your quick response, I wasn't getting anyone to answer the previous post.

  If your saying these HP spare parts are not exclusive to the company?  Some connectors may be owners, but most are not.

  It should work then?  Yes.  I've recommended hundreds of the PSU in the years I've been helping on the Forums; in fact since about 2002.

  How about the input/output & amperages of note that I registered?  As I understand not all this jargon, I want to assure you that I have / using correct notation for my system.  I don't want to fry one of my compondents with to much amperage.   Well, either I did something wrong installing or this power supply is a dud then.  Read my explanation at the top of the page.

  As I said before I pretty sure I had all the right connections, what can you tell me if it sounds right for you.  I have pluged in both connectors wired on the motherboard which were the main ATX 24pin power connector and the EPS/ATX12V 8 pin which I shared and pluged a piece of the cable labeled 'CPU' in slot 4 pins on the montherboard labeled ATX CPU.  Regarding the other split 4 pads, I don't see anywhere, it could be pluged into the motherboard.  If two 4-pin connectors were even marked, it should be good.  However, you can try to plug the other 4 pin instead of this, just to make sure that the right pair is connected to the processor power.

  My AMD Radeon HD 6570 1 GB graphics card is the type that is fed through the MB so I didn't use any of the PCI-E cables 6-8 poles.  It is very good.

  And so the only thing I had left that I have pluged the compondents of Sata cables that was my Bluray burner, my 2 TB hard drive and my USB 3.0 card.  They are very frank.

  Yet once again being installation of hardware in my system let me ask hopefully not a stupid question, but when you connect compondents Sata cable, you must have the plug-in in a particular order of wiring compondent or how do you?  I don't check the specifications of your power supply, but I think most of them have a single 12V rail.  If this is the case, you don't have to connect them to any order.  If there are two rails, it is best to divide the power of each rail.

  On my old PSU, it has an extension cable SATA used to connent card USB 3.0 which is pretty tightly squeezed between graphics card and sound card, so I guess I could use the extension cable with the new PSU POWER Sata wiring without any compatibility also publishes, right?  This should be no problem I can think of at this point.

  Thanks again for your help, I'll probably will try and plug it once more and see if I can make it work.  If this does not work for now, I strongly suggest that you contact Technical Support of Corsair for help.  They are the experts on their products and grab any errors that we do.  It is very difficult to diagnose a problem by far.  When you have done with this project, you will no longer be the excuss you are a novice. You will have a lot of knowledge that you did not when you started.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.