Apex 5.0.1 Footer appears too high on the screen

Similar Questions

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• 6500 copies too high to the top of the document

  Printing: 6500 has more E710n-z

  Op sys: Windows 8.1

  The printer prints too high on paper: the 6500 prints even his own test page with lettering half cut off at the top. Printing from Word is the same, so it's not a software or application problem.

  HP update is defined on, and the drivers are the latest: Firmware = CIP1FN1206AR, the version of the software = 028.000.1315.000, 09.84.00.1189 = driver version.

  I saw this issue raised in other - apparently hard for a few years - messages and responses were not useful.

  Can we remedy and suggest or offer a remedy?

  Hi Blennerhasset,

  I understand the printer prints too high on the page and even the test page is cut off. I see that you already have a troubleshooting, but since I'm not sure what you've done already I suggest all initially an alignment;

  1. Load US letter or A4 size, unused, plain white paper in the tray.

• HP Photosmart more B210 - printing is too high on the paper.

  The text is too high on the paper.  I can solve this problem when you generate letters and reports, etc. by simply letting a larger margin superior, but I cannot produce sheets of labels.

  I tried to change the paper size under tray settings/Main properties/device of the "letter" to "A4" - click on apply and OK - but when I check that the setting is always "letter".  Don't know if this is causing the problem, but if the book 'Letter' measures are lower than those of the A4 paper, he could be--and I wondered why I couldn't set this parameter.

  The printer is related to the Windows XP laptop and desktop Windows Vista computers.

  I hope someone can help.

  If the changes are not stick when made directly in the driver, the driver is probably corrupted. Try to uninstall and reinstall the printer driver and software package. I'll link the latest version below. Let me know what happens.

  HP Photosmart full feature software and drivers

• What is the maximum size of the image (in pixels) a height that supports the Muse? I noticed that if the photo is too high, reduce the Muses. Thank you

  What is the maximum size of the image (in pixels) a height that supports the Muse? I noticed that if the photo is too high, reduce the Muses.

  Thank you

  If you place an image with a height or width greater than 2048 pixels - in Muse - Muse will scale the image down proportionately, limiting the larger size to 2048.

  However, if you want to use the picture to its original size, you can move the image to the desired size by dragging handles to resize, or by entering values for height and width in the strip control on top. After that, go to the active panel and locate the image, then right-click on this image in the active panel and choose "import of large size. Which would bring the image lost the original image information.

  Hope that gives you clarity on what you wanted to know.

  See you soon,.

  Vikas

• After the last update, everything has much too big for the screen

  After the update everything was too big for the screen. I can't have enough on the screen to play a game even. I revert to a previous version and it was ok, but once again when the update went thru it's still too big. I tried to check and he said: I'm always on the 96 dpi.

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• What signal is emitted in the ListView, when one of its cells appears in or from the screen turns off?

  What signal is emitted in the ListView, when one of its cells appears in or from the screen turns off?

  I created listView with custom listItemComponents

  Is there any signal when listItemComponent go to the screen?

  Currently, it is not possible to detect if the cells turns off the screen. Even if you join LayoutUpdateHandler them they will just stop send updates when you go off the screen. I managed to hack a solution using a timer, but I guess that a cleaner approach would more use a ScrollView with CustomControls instead:

  1. get the dimensions of the ScrollView joining ScrollView LayoutUpdateHandler.

  2. attach the LayoutUpdateHandlers to the CustomControls.

  UPD: It is also viewableArea & viewableAreaChanged event scrollView property.

  3. If the controls that were inside the visible area of the ScrollView went outside, raises the event.

  Of course re-use of cell works that way.

  It's so easy to grab the cell on the screen:

  If you use ListItemProvider, updateItem() function is called when the element appears on the screen:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__listitemprovider.html

  It will also be called if the data item are updated in the model.

  When the item is created for the first time, createItem() is called.

• of course, HTML5 version is too large for the screen of the mobile device

  Hello

  He must be an old question, but I couldn't dig up a response.

  I published a few projects Cp7 for SWF and HTML5. Dimensions of the project are 1100 x 650. The evolving "Content HTML" option is disabled. Published a zip file that has been transferred to our LMS.

  On a desktop computer, it plays very well. On a smartphone, it plays, but the film is much too big for the screen. Have you tried with Chrome and FF, but this makes no difference.

  Any advice would be much appreciated.

  Best regards

  Marvin DuBois

  The evolving "Content HTML" option is disabled.

  Select this option, and then will scale the content to the screen on all devices.

  I don't know if there's a sequel to did not scale on desk and sliding scale, it's all or nothing.

• How do I resize Photoshop - it is too large for the screen of my Macbook Pro and I can't resize corners?

  Photoshop is too large for the screen of my Macbook Pro.  I can't access the sizing handles - they are off the screen and I can't drag.  Any solution?

  You see the buttons in red, yellow, and red window? If for this, click on the green.

  If you don't then you may be in mode full screen, and pressing once or twice on the "F" key to return to normal mode.

• Acer Aspire One D257-13450 fixed size window too big for the screen

  I have an Acer Aspire One D257-13450 running Windows 7 Starter Edition, and when I open some windows (e.g. Brother MFC 990CW control of scanning parameters), the window is too large to be completely displayed on the screen. The bottom of the window is hidden under the bottom edge of the physical screen.  The window can me moved around the screen as usual but I can't move it to the top of the screen enough to see the bottom of the window - this is where the selection of options for this window buttons. This particular window has only a close button in the upper right and not the usual buttons Minimse or restore down. I have connected a monitor external and also adjusted the screen resolution and nothing doesn't affect the ability to resize the window and get off at the buttons of options I need. I was able to guess the buttons under the edge of the screen by using the tab key to tab through all the options in this window, but it is not very satisfactory. Any suggestions please?

  Many netbooks with Starter have only a 1024 x 600 screen - if the program needs a minimum of 1024 x 768 it may not work or may not display all. But it wouldn't be because of the netbook, Windows.

  You can try this modification to allow higher resolutions:
  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

• I have a 22 inch monitor set to 150%, but since I installed Firefox, the font is too small and the screen is too small. Cannot enlarge font or screen. I can do control ++ whenever I have enter a page but don't want it as my solution.

  Control/display panel, I got my screen set at 150% and a resolution of 1680 X 1050. It filled my screen 22 inch with the content of the page. Now that I have installed Firefox, the police is too small and the content is centered in the screen leaving about3"each side of the space empty. I want to fill the screen and make things bigger. Have not found a way to do it. Firefox tells me in my window/display of the control panel that setting my display at 150%, ' some elements may not match your screen if you choose this setting if your screen is positioned on this resolution. " It worked fine with the Explorer.

  To help other users find solutions, please come back to this Thread and connect you to the

  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• 5701na stream 7: too big for the screen Windows

  Hello

  I have a problem with the size of windows on my screen. Quite often and especially when I face problems of system such as updates, the windows are larger than the screen. There seems to be no option to resize manually or to tell them to fill the screen and just.

  This means that, for example, the OK button is the bottom of the screen, with no way to resize the window or scroll down (sometimes it is not broad enough on the bottom, but by hiding under the Dock down, so try to hit the OK start something else)

  I tried to work around using the keyboard equivalent (tabs etc.) but I often stuck into problems almost Terminal.

  All the ideas!

  Justin

  Hey @JustinWorsley,

  Welcome to the forums of HP.

  I understand that you are having problems with sizes of application being too large in Windows 10 window.

  Your tablet screen resolution meets the minimum requirements for Windows 10. Make sure that the resolution is set to 1280 x 800. If it is not already in 1280 x 800, try changing that first and let me know if it helps. If this is the case, you may need to reinstall the drivers GPU.

  Thank you.

• Windows seem too large for the screen after changing the video card

  original title: display, taskbar and the Internet issues

  I have recently (less than a month ago) updated my video card, and for its great a game however the work he did on my desk is not so great.
  I like having the screen at 1280 x 960, but the taskbar clock is cut by half
  Another issue I have is that the 'X' button is cut in my Firefox window. I usually keep ot holding down the control button and the resizing of pages web pages, videos and games because is too big or too small.

  Any suggestions how to solve these problems?

  Hello

  1 did you receive an error message?

  2. don't you make changes to your computer?

  I suggest you to follow the links and check out them.

  Try chaning the screen resolution

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Check the DPI settings

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller

  Expand your computer screen: 6 ways to make it easier to see

  http://www.Microsoft.com/athome/Setup/magnify.aspx

• The icons are too big for the screen

  Hello

  Everything on my computer screen seems too big. From the icons, texts, programs like chrome (pages are inside the window more). I do not change the display settings recently, and I did the updates. It happened suddenly, out of the blue.

  I tried to change the resolution, but it lists only two possible resolutions, 1024 x 768 and 800 x 600. Even when I change, it make no impact.

  What should I do?

  Use a monitor dell with graphics card: adapter Standard VGA Graphics chipset graph mobile/desktop Intel R (HSW) device.

  OS: Windows 7 professional, 64-bit

  Original title: everything seems too big on my computer

  The fact that you have only two resolutions would indicate that the game graphics chip driver is not properly installed.

  The Standard VGA adapter is the rescue driver Windows for what specific cannot be identified or are not available.

  Depending on the hardware of the computer go to the manufacturer's website, search for your particular system, download and install the graphics driver. The screen itself is not relevant.

• Adobe Photoshop CC 2015 is too large on the screen

  I got automatically updated for Adobe Photoshop CC 2015 (from 2014) and now everything is too great in the interface of the application, I barely space to work with my images. How do the buttons/menus, smaller toolbars, as if it was in 2014.

  I have a screen 1920 * 1080 in my laptop HP envy and that's how the new Photoshop looks on this subject:

  

  Go in Edition > Preferences > Interface and check that the bit under the text on this Panel is set to 100% or auto (which looks like 200% is set). Good to play with these settings to see which work best.