aplication works in Mode safe, but not when windows starts normally

Similar Questions

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• "Sl_slider" JavaScript works perfectly in Dreamweaver, but not when uploaded to file hosting

  I use JavaScript to create a nice slideshow for my site, but the script does not work properly. Here's the situation.

  I downloaded all my files to my ftp folder and checked that they are in the right place, but my JavaScript will not work when I go to my Web site. The script works perfectly when I test it in Dreamweaver, but not when it is transferred. I use GoDaddy hosting.

  No one knows what might happen? What I have to do something special with where I put the javascript files in the ftp folder?

  Here is my site: http://wollenziehn.com/Products.html

  Thanks for the research!

  Seems to be some problems of case with the file names of your image.

  for example, the code for images pointing to

  images/Image2.png"alt ="image of the tester"/ >

  but the picture is

  http://wollenziehn.com/images/Image2.PNG (with a lower-case i to image2.png)

  On a Linux server, where you are staying, Image2.png and image2.png are completely different files.

  Code should read

  images/image2.png"alt ="image of the tester"/ >

• My Lightroom worked the perfect time, but today when I start the program I get a message "Lightroom has stopped working".

  My Lightroom work all the perfect time, but now when I start the program I get a message "Lightroom has stopped working".

  I use Windows 7 pro SP1and Photoshop and Lightroom CC. I think that it is a more recent version.

  Yes, I use the administrator account

• Dell XPS 8700 - failure of the keyboard when the bios boot (but not when Windows is loaded)

  My Dell XPS 8700 has 10 Windows and a Logitech Keyboard wireless, connected by USB. The keyboard works absolutely fine when Windows has loaded. I have the latest version of the bios, A11.

  However, when the computer is turned on and starts the bios start, it displays 'Keyboard Failure' on the screen for about half a second. When I try to go into the bios setup by pressing "F2" at the counter (I keep typing "F2" from the moment when I press the power button on the computer), there is no answer. The "keyboard failure" and inability to enter the bios setup seems to happen if I do a cold immediately after a stop start, a cold start after the computer is turned off for an extended period or a reboot.

  I tried to connect the wired keyboard original Dell one of the USB ports on the front of the unit (without disconnecting the wireless keyboard) with the same problem at the start of the bios.

  I encountered this problem on versions of bios A11 both A03. I know that in the past, although I don't remember when - I was able to enter the bios setup by pressing "F2".

  Any thoughts on how to solve this problem?

  You can try and reset the CMOS. It will return your settings to factory settings, but not the version. Usually, this erases these problems because CMOS stores data editable such as your wireless keyboard settings. BIOS stores the information about the basic material that is unchangable as your keyboard usb, mouse and other essential equipment. If you notice, when you just plugin any keyboard and mouse, its recognized at startup. Your needs software to run wireless device and that is stored in the CMOS.

  So once reset you the CMOS, you may need to then install the wireless software.

  Good luck.

• That means when I can work in Mode safe, but normal mode is unusable

  The other day, I booted up my laptop in the morning and read the news when my browser froze, then the whole system locked. Now, it takes an absurd amount of time to start, and once I have, the system hangs once more if I try to do anything. I am able to get safe mode and it works very well without any problems. So I'm clueless as to what the problem is. I tried to perform a clean boot and gave no results. I am running Win 7 Home Premium 64-bit.

  Hello

  You can also ask your question in the product Forums Asus here: http://vip.asus.com/forum/

  Thank you.

• Recordset advanced join works on test but not when I start page

  I created a simple join

  SELECT *.

  OF tenant_signup, name_editprop

  WHERE tenant_signup.prop_id = name_editprop.prop_id

  When I run the test, it shows the correct information. When I charger load in the page, then insert the relevant informaion it shows just the first record in the database

  any ideas would really help banging my head against a wall now

  Thanks in advance

  Right. As mentioned previously, you must include the user id in your SQL where clause.  First make a backup copy of the script above. Can change this:

  $query_Recordset1 = sprintf ("" SELECT * FROM tenant_signup WHERE userid = %s ", GetSQLValueString ($colname_Recordset1,"text")");

  to do this:

  $query_Recordset1 = sprintf ("" SELECT * FROM tenant_signup, name_editprop WHERE the name_editprop.prop_id = tenant_signup.prop_id AND userid = %s ", GetSQLValueString ($colname_Recordset,"text")");

• When Windows starts normally, displays the message "We apologize for the inconvenience.

  I tried all the ways of security last good known configuration and start windows normally, but she returned to the same screen that I can do to solve this problem.

  * original title - we apologize for the inconvenience... *.

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• When windows starts, the user name is not displayed, almost all programs do not work, or I get a message saying that they do not have authorization to run the service

  When windows starts the user name is not displayed, almost all programs do not work, or I get a message saying that they have permission to run the service, sometimes windows not loading some programs of initialization and I can't turn off the pc by using the start menu, when it arrives, sometimes everything works normally when I turn on the pc except of my antivirus (avast!) and firewall (comodo) , they are responsible, but avast! said that the service is disabled and when I him there is a message saying that he had ceased to maximize or in an inconsistent state and comodo said that the application of the agent is not running.

  My Windows is XP Professional SP3.

  Thanks in advance.
  (Sorry for my English)

  * original title - I have starting problems I've ever had and I can't find a TomTom.*

  Salvation exodus REV,

  You did it of any material changes or software on the computer before this problem?

  I recommend you to uninstall Avast! & Comodo temporarily from Add / Remove Programs. Later, check to see if the problem persists.

  To uninstall Avast!, you can use utility aswClear to uninstall Avast!.

  For more information, refer to this link: Uninstall Utility

  You can not install Comodo since Avast! has a built-in & antivirus firewall.

  Hope the helps of information.
  Please post back and we do know.

• Website works perfectly in DW, but not online.  Can someone tell what I inadvertently hurt?

  Hello

  Just finished the site www.sheilaschaefer.com, which works in DW, but when I go online it seems to be something wrong on the portfolio.html page.  I can access paintings (Gallery/index), but not photos (gallery2/index) I get a message that does not find the Gallery XML.  Can I have two swf on one page and if so, is there a special way to integrate them on the same page.  I'm really confused as to why he works in DW with a preview in Safari, but not when uploaded to Safari.

  Any advice would be appreciated.

  Thank you.

  Like many people, I don't have a Flash plugin for the browser I tested (Firefox), so the pages gallery/index.html (paintings) and gallery2/index.html (photographs) both give an installation icon "you need flash.

  Flash is essentially dead for all but very specialized sites and should really be used on all modern sites. Use html5, css3, and javascript for interactive content.

• How to apply a net of InDesign paragraph above, but not when the first column

  How to do a paragraph rule 'above' but not when it is first in a column. In other words, the rule above will work only if it is not the first paragraph of the column (even if it appears in a block of text in multiple columns).

  Before jump you the gun: rule below will not solve that, for various reasons.

  Thank you very much in advance.

  I'm not completely fluent in JS, but I think it should work:

  main();

  main() {} function

  all the stories

  for (var i = 0; i)< app.activedocument.stories.length;="">

  monarticle var = app.activeDocument.stories.item (i);

  text of history columns

  for (var j = 0; j)

  var c = myStory.textColumns.item (j);

  first line in a column

  var b1 = c.lines [0];

  first line in the first paragraph of the column

  var b2 = c.paragraphs [0] .lines [0];

  disable the rule if they are equal

  If (b1.baseline == b2.baseline) {}

  {if (c.appliedParagraphStyle.ruleAbove)}

  c.paragraphs [0] .ruleAbove = false

  }

  }

  else {}

  c.paragraphs [0] .ruleAbove = true

  }

  }

  }

  }

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• I changed my apple ID password. I restarted my computer and my iphone. My new password works with my laptop, but not my iphone.

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  iowaoma wrote:

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  Apps are tied to apple id and password that was used to download/purchase it.

  Try your old password and see if you can update or not.

• Stand By worked in XP Home, but not XP Pro SP3 on the same machine

  Stand By worked in XP Home, but not XP Pro SP3 on the same machine.
  How can I get Stand By under XP Pro SP3?

  * title Moose - see http://stlcc.org/SYS/Standby.bmp for the issue.*

  Hi srfpala,

  I suggest that you manually download and install the latest drivers for the graphics card graphics card or computer manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477