Apoyo disc application

Similar Questions

• HP G71 340 Notebook computer: computer HP G71 Notebook not start Windows 7 installation disc application

  Suddenly I became / / / as this in the search window, tried to run Norton, it seems stuck so I turned it off and then tried to restart, it sound strange signal, beep... beep, that I never heard before after repeated tests went up in the verification of memory message, and it is went well and seemed very well, but still cannot start it somehow a message

  that the battery is low must be changed, instruction followed by HP from another computer to drain and reconnect, but contine to pass the message that Windows could not starte, assistance program have been changed, you have to insert the Windows Setup disc, which I apparently do not have with me at present, probably misplaced, that the computer was purchased 10 + a few years ago.

  What I do, and how do I retrieve my documents, even if it is fixed. Appreciate any advice! Not very computer savy at 79.

  The question has been cleared up by itself, as the liquid I used to clean the filling of kay should have passed and created the problem of dysfunction. I brought to Staples and paid from the outset for diagnostic work, fortunately they coulnd't you not in my computer because they have misplaced my password. I remember the next morning incident, and of course the computer went back to normal when he trided. To speak with the Manager, I received my full refund. It works very well. So be aware of the effect of liquid in your computer! Thanks for trying to help though and will keep the information in case I need it in the future how to get the disc to start my computer.

• Satellite M55-S325 DVD write error (MAT * a DVD - RAM UJ-years 840)

  Hi all
  I have a Satellite M55-S325 with MAT * A DVD - RAM UJ-years 840 Firmware Version 1.52 I bought States 5 months ago, everything seemed fine until a few weeks ago when I tried to write some data DVD, I had unrecoverable errors while writing the DVD using NERO 7 ULTRA EDITION, but now I get this messege all the time and I'm not able to write any DVD the disc seems to be well in CD writing. I tried to use recording SOUND now that comes with the laptop, no luck. I tried to reduce the size of the files, and try with lower write speeds but still no luck. I disabled burning CD of the Windows XP SP2 IMAPI burning service COM as well. I use a good quality DVD-R that worked fine before. I would appreciate your help because my HDD is almost full (but still 10 GB of free space) and I need to get a backup of my data.
  Here is the log of my last attempt in writing, file a NERO DVD:

  1C82-0010-8011-0000-1454-2737-5268

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

  NT-SPTI used
  Nero Version: 7.0.1.2
  Internal Version: 7, 0, 1, 2

  Recorder: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: TOSHIBA MK1032GAX atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD - RAM UJ-years 840 atapi Port 1 ID 0 DMA: on

  = CDRom-Device-map =.
  CARPET * a DVD - RAM UJ-years 840 D: CDRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 73400320 (0) bytes
  ShowDrvBufStat: 1
  BUFE: 0
  Physical memory: 502 MB (514480 KB)
  Free physical memory: 160MO (164772kB)
  Memory in use: 67%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  14.5.2006
  Compilation ISO
  15:18:55 #1 text 0 file Isodoc.cpp, line 6411
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: REAL
  Multisession: FALSE
  Burning mode: DAO
  Mode : 1
  : ISO 2 (31 characters)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  15:18:55 #2 Text 0 File ThreadedTransfer.cpp, Line 525
  ReadBuffer-Pipe got 262144KB of memory

  15:18:55 #3 text 0 file Reader.cpp, line 124
  Player running

  15:18:55 #4 text 0 file Writer.cpp, line 113
  Writer D: MAST * A DVD - RAM UJ-race years 840

  15:18:55 ISO9660GEN #5-11 file Geniso.cpp, line 3312
  First address writeable = 0 (0x00000000)

  15:18:56 #6 text 0 file Burncd.cpp, line 3302
  Turn on Disc-At-Once, using DVD media

  15:18:56 #7 Text 0 File DlgWaitCD.cpp, line 279
  Last possible write address on media: 2295103 (510:01.28, 4482 MB)
  Last address to be written: 2288159 (508:28.59, 4469 MB)

  15:18:56 #8 Text 0 File DlgWaitCD.cpp, line 291
  Write in overburning mode: No. (enabled: CD)

  15:18:56 #9 Text 0 File DlgWaitCD.cpp, line 2578
  Recorder: MAT * a DVD - RAM UJ-years 840, media type: DVD + R
  Disc manufacturer ID: MBIPG101, media Type of ID: R04, product revision number: 1
  Disc Application code: 0, extended information indicators: 3

  15:18:56 #10 Text 0 File DlgWaitCD.cpp, line 458
  > Protocol of DlgWaitCD activities:
  =========================================

  15:18:56 #11 text 0 file ThreadedTransferInterface.cpp, line 847
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 2288160 (2288160) original disc POS = #2288160 / 508:28.60
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288160 blocks [D: MAST * a DVD - RAM UJ-years 840]
  --------------------------------------------------------------

  15:18:56 #12 text 0 file ThreadedTransferInterface.cpp, line 1059
  Prepare recorder [D: MAST * a DVD - RAM UJ-years 840] for write in CUE-sheet-DAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Session closed, fixed disk
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 0 4686151680, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
  0 | Lead-in | 0 | 0x41. 0x00
  0 | 1. 0 | 0x41. 0x00
  0 | 1. 1. 0x41. 0x00
  2288160 | Lead-out | 1. 0x41. 0x00

  15:18:56 #13 text 0 file SCSIPassThrough.cpp, line 36
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  15:18:56 #14 phase 24 file dlgbrnst.cpp, line 1725
  Caching of files started

  15:18:56 #15 text 0 file Burncd.cpp, line 4132
  Cache writing successful.

  15:18:56 #16 phase 25 file dlgbrnst.cpp, line 1725
  Caching of files completed

  15:18:56 #17 phase 36 file dlgbrnst.cpp, line 1725
  Burn process started at 8 x (11 080 KB/s)

  15:18:56 #18 text 0 file ThreadedTransferInterface.cpp, line 2685
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  15:18:56 #19 text 0 file Cdrdrv.cpp, line 8411
  -A DVD structure: physical Format information (00 h).
  Layer: 0, address: 0 (0 h), AGID: 0; Length: 2050
  Book type: DVD + R (10), part Version: 1.0 x (1)
  Disc size: 120 mm, maximum speed: (h F)
  Number of layers: 1, track path: path of the parallel runway (PTP), layer Type: recordable
  Linear mass: 0,267 um/bit, track density: 0.74 um/track
  Starting the number of physical sector of data area: 30000 h (DVD-ROM, DVD-R /-RW, DVD + R / + RW)
  End number of physical sector of data area: 26053F h
  End sector number in layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
  There is no data in Burst cutting area (BCA)
  Disc Application code: 0 / 0 h
  Scope of Information indicators: 3 h
  Disc manufacturer ID: MBIPG101
  Media type ID: R04
  Product revision number: 1
  Number of bytes to use physical format information in ADIP up to byte 63:56
  Particular media [16.63]:
  00 00 03 4 42 49 50 47 - 31 30 31 52 30 34 01 38... MBIPG101R04.8
  23 54 37 12 02 42 6 02 - A8 6 B 15 15 0 B 0 B 08 08 #T7. BN... k...
  01-19-1 B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00...

  15:18:56 #20 text 0 file DVDPlusRW.cpp, line 666
  Begin to write his address to the LBA 0
  Mode high compatibility DVD: Yes

  15:20:47 #21 SPTI-1128 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1128)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x11
  Meaning of Qual: 0x00
  The CDB data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
  Sense area: 0xF1 00 03 00 00 00 00 0 a 00 00 00 00 11
  Buffer x05e50000: Len x 10000
  0 X 40 86 AB A0 6 B 93 01 4F 75 2 A 54 25 B7 F6 D3 E5
  0XA9 FC 97 DF 55 73 64 2 AA AF 96 7 D B8 4 C 7 C 66
  0XC1 9TH C1 FF FF 55 59 DB 08 65 CB 6 CA B9 0C HAS 2 B

  15:20:47 am #22 RDC-1128 file Writer.cpp, line 302
  Unrecoverable read error
  D: MAST * A DVD - RAM UJ-YEARS 840

  15:20:47 #23 text 0 file ThreadedTransfer.cpp, line 228
  all writers idle, stopping conversion

  15:20:54 #24 text 0 file ThreadedTransfer.cpp, line 222
  conversion idle, stopping reader

  15:20:57 #25 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #26 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #27 phase 127 file dlgbrnst.cpp, line 1725
  Generating borders high compatibility DVD

  15:20:57 #28 phase 129 file dlgbrnst.cpp, line 1725
  Production DVD borders completed successfully

  15:20:57 #29 phase 38 file dlgbrnst.cpp, line 1725
  Burn process failed at 8 x (11 080 KB/s)

  Existing drivers:
  File ' Drivers\CDRALW2K. SYS: Ver = 6.2.0.132, size = 24698 bytes, created 23/10/2003 04:15:02
  File ' Drivers\PXHELP20. SYS: Ver = 2.03.28a, size = 20640 bytes, created 05/31/2005 23:36:01 (Prassi/Veritas driver for win 2 K)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Hello

  I can't find any strange or mysterious messages in the log file.
  You suggested that the drive can burn CDs but not DVDs.
  The calibration lens dysfunction is sometimes responsible for these issues.
  Unfortunately, I have no solution for this problem. The replacement drive must resolve.
  The unit is fairly new in this case, you should ask for help ASP.

• Planning for HP Pavilion p6792uk, but how can I order the CD at the same time buying the PC

  I'm in the United Kingdom and can not can not find a way to order the recovery CD.

  Desktop computers and laptops are different animals to HP, but the last time I had any CD or DVD has been with an HP laptop in 2004... It came with a WinXP SP2 OS CD and a DVD application & driver. Since that time, I bought two Compaq sr1320nx, a Compaq sr1910nx, HP a1632x, two HP dv9617nr (portable computers), a p6130y HP, a p6320y of HP, HP p6787c, two NV77h05u of Gateway (laptops) and an HP p7-1026. None of them came with CD or DVD for any purpose. They have all required the use of an integrated 'recovery disc creator' program to make the defined recovery disk.

  The only thing you will get from HP is a set semi-generiques recovery of an additional drive. They will not provide a separate OS disc, application disc.

  Frank

• It not install CS3 for iMac

  CS3 for iMac will not go beyond the disc "Application". Installer calls for 'Disk 1 to continue', but there is no such disc. Only 'Application' and 'content' and none of them will continue to install

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

• Re: The recovery disc restores my important applications

  Hello.

  About two weeks ago, I used the Recovery Media Creator to restore my laptop to its factory and create the 4 dvd recovery media.

  I had an important application installed.
  Would it not possible to recover these media?

  Thank you very much

  Hello

  Do you mean the 3rd party applications that you installed after the laptop has been configured?

  No, these applications are not part of the created recovery disks.
  The recovery disc contains only the image of Toshiba.
  The image is a package that contains the Windows system, the driver Toshiba and the tools and applications like Win DVD or similar

• Application of recovery disc creator don't run / not working

  I was hoping someone could help me I want to create the DVD for my system recovery disks, but the application does not work. I installed IS the path '"C:\Program Toshiba Toshiba Recovery Disc Creator\ToRDC.exe' ' does not exist. I run it and nothing happens!

  Anyone know if I can download it or re-install... I can't find out how?

  I have no error or anything, it does not work! Laptop is Toshiba Satellite.

  Thank you!
  Steve

  Hello

  Satellite you need exactly?
  Folder HDDRecovery is available on the second partition?

  This tool cannot be downloaded. Now, all you can do is to install the OS by using recovery recorded on the second partition image. I hope that it will work.

  When you start your laptop, tap F8 and choose repair my computer option. Follow the menu on the screen. After the new installation of the operating system, you will be able to use it again.

• Why my Blu - ray discs play no more after the application of all updates

  I applied all updates for Win 7 x 64 to my e9180t.

  Media Smart now plays regular DVD but not of bluray. That is what it is?

  Hey TXGuy,.

  Take the update mentioned in the Mr. Do. the process of upgrading to Windows7 if you qualify for the upgrade HP is to load the upgrade wizard HP first disc. It copies all of the updated drivers and applications on the system if you do not have to go hunt down them on HP.COM.

• Frontlines: Fuel of War will not work 'E:\. Application not found"when gameplay disc is inserted

  Frontlines: Fuel of War will not work. The installation went well but when I try to run it, the game never starts. I received a message to update, but the game has not officially begun. So one by one, I tried to run the game after each update and still nothing. Everything is up-to-date drivers, windows updates, all my other games work great (for example Guild Wars, Halo PC, ijji Gunz etc.). I don't get an error message after trying to start the game however when I put the game disc in i get "E:\Application not found". I've never had a problem on XP and I have not tried officially on Vista. How can I get this game to work?

  Hello

  you have the original version (DVD) of the game?

  If there are also other programs to install on record as Microsofts vcredist, please intall all too.
  Another option would be: copy the DVD on hard drive you one that launch the game again. If skip you the DVD-check.

  Concerning

• Cannot install Windows 7 Home of the installation disc. -E:\setup.exe isn't an application valid win 32 what that means?

  I want to upgrade Windows XP to Windows 7.  My disc of Windows 7 Home Premium (32 bit) could not run with the following message "E:\setup.exe is not a valid win 32 application.  I also tried my 64-bit installation disc and it failed also. They are of genuine discs purchased from a well known local firm.  What can I do now?

  Hello

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• Cannot install PowerDirector 10 Super-Micro by Cyberlink, when I put the disc in the player getting error (E:\is not a Win 32 Application valid).

  I installed Windows 7 64 bit on a new computer.  Everything that the seams to work properly. I then tried to install a new program from Cyberlink called PowerDirector Ultra 10.  I put the disc in the drive and get an error (E:\is not a Win 32 Application valid).  If I put another CD or DVD in the drive, it works very well. Can someone help me please

  Original title: using Windows 7

  I would contact the people you bought it from.  Maybe you have a faulty drive.  You can also click on start-> computer and look at the contents of this disc.  If there is a Setup.exe file on that, try double-clicking it and see what happens.  If this does not help, open the AUTORUN. INI file with Notepad and see what file it points to.  Then try double-clicking what it points to.

  Good luck.

• "Adobe Creative Suite 4" is compatible with the o/s 10.6.8 iMac.  and if I can reinstall this application from the origin of the original disc

  "Adobe Creative Suite 4" is always compatible with the o/s 10.6.8 iMac. ?  Can I REINSTALL the application from the original disc I made originally in 2009?

  CS4 must remain consistent with the requirements of the System 10.6 | Adobe Creative Suite 4, products of Point

  If you can't install it with the disc, you can download the installation files and use the serial number of the disc to activate it.

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

• Hi, I have the new iMac and I am trying to install the old version of ADOBE CS 4. Wenn first disc (1 Application) is finished program request mi put in the disk #2. If I click ok nothing happens and I can't leave the facility. Can anyone help?

  Hi, I have the new iMac and I am trying to install the old version of ADOBE CS 4. Wenn first disc (1 Application) is finished program request mi put in the disk #2. If I click ok nothing happens and I can't leave the facility. Can anyone help?

  Hello

  Try to download the CS4 application from the link below:

  Download the CS4 products

  Kind regards

  Sheena

• My hard drive Apple is dead; trying to recharge my CS4 disks, but 1 application disc can't be read?

  I can't load my disc 1 Application CS4; reads like a blank disc. Can someone help please?

  If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  and activate it with your serial number.

  If you have a problem downloading, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  Unable to obtain the cookie translates into an error page displayed after clicking on a link on prodesigntools.com

• Error 'the Application components are missing' no disc to reinstall

  I have the error message on my next mac I need to install some of the components are missing. I don't have the disc so the solutions has to move from its current location to photoshop CS5: / / / applications/adobe photoshop CS5, but I have no idea how! Any help please.

  Thank you

  Please download it again Internet Setup and keep a copy of it for future use.

  http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html

  Please download the Mac file, navigate to the directory where you saved the installation file and double-click on the dmg

  • Follow the instructions on the screen to install
  • When you are prompted for a serial number, enter your serial number and complete the installation.

  Follow the instructions mentioned carefully.

  Kind regards

  Ashutosh