APP-FND-00466: & the ROUTINE cannot find your competitor demand & REQUEST.

Similar Questions

• Ripple can not build app Playbook: the system cannot find the path specified.

  Not a huge surprise here, but I tried to compile my app for Playbook in undulation. After following all the steps of downloading all the SDKs, get and save new keys, have all the files in place, etc.. Ripple can simply with:

  Oh Snap! Build request failed with message: The system cannot find the path specified.
  

  Without rhyme or reason. No way to detect what it is. Ripple is dangerously wrong sometimes. And the "Oh Snap!" part is terribly boring.

  I was able to build the application via command line (which requires you to make a zip file of everything manually... * sigh *).

  Anyone know how it is possible to debug?

  Hi shnuffy,

  Assuming that the Tablet is the installation folder which includes bbwp and jre, you'll want your SDK path pointing there. Example:

  C:\BBWP\tablet

  For example, my Tablet SDK is installed in this folder that is used in my Path SDK:

  C:\Program Search SDK WebWorks Motion\BlackBerry to Tablet 2.2.0.5

  Note that I am assuming that your path refers to the folder that contains bbwp.exe, but you really want to make a folder of higher level.

  Other paths seems fine. Can you give than to try and confirm if you still have questions?

  Erik Oros

  BlackBerry Development Advisor

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210. tmp\sampleapp (the system cannot find the file specified) [ERROR] CAP exception has occurred

  C:\Program search in Motion\BlackBerry 2.3.1.5 > bbwp SDK WebWorks
  C:\apps\sampleapp.zip o C:\apps\Output2
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [WARNING] Cannot find an element of
  [INFO] The application of filling source
  [INFO] Compilation of application BlackBerry WebWorks
  IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210
  . tmp\sampleapp (the system cannot find the file specified)
  [ERROR] CAP exception has occurred

   

   

   

  How do I solve this problem

  The tools are not compatible with JDK7. You need to install JDK6 and it must be the 32-bit version.

  If you have several versions of the JDK, you can modify bbwp.properties in the subfolder bin of your SDK WebWorks to include the following text:

  C:\Program Files (x86)\Java\jdk1.6.0_31

   

  
  You would update the JDK version to match your own, but note that this is the SEO Program Files (x 86); the path 32-bit installations. This way you can have several JDK if you need, but the command bbwp must reference the appropriate JDK.

  In short, he must be JDK6 and it must be 32-bit.

• FRM-93535 the system cannot find the specified file

  Hello world

  Once we have installed WL 12 c, we try to launch text.fmx form to test the object, we have the following error:

  FRM-93535 cannot create process.unable run time to run the start command.

  in formsapp - diagnostic.log, we found the following entry:

  [2016 01-24 T 14: 41:53.136 + 03:00] [WLS_FORMS] [ERROR] [FRM-93534] [oracle.forms.servlet] [tid: 104] [username: < anonymous >] [ecid: 53d1a119-bca3-4c2d-bbb0-74530762e90f-00000297,0] [APP: formsapp] [name of the partition: FIELD] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.14] [SRC_CLASS: oracle.forms.servlet.RunformProcess] [SRC_METHOD: startProcess] cannot run start frmweb webfile = HTTP-0, default command

  [2016 01-24 T 14: 41:53.136 + 03:00] [WLS_FORMS] [ERROR] [FRM-93535] [oracle.forms.servlet] [tid: 104] [username: < anonymous >] [ecid: 53d1a119-bca3-4c2d-bbb0-74530762e90f-00000297,0] [APP: formsapp] [partition name: FIELD] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.14] [SRC_CLASS: oracle.forms.servlet.BaseServlet] [SRC_METHOD: logConnectionException] cannot create the enforcement process: cannot run the command to start []

  java.io.IOException: cannot run program "frmweb" (in the "D:\Oracle_WL\Middleware\Oracle_Home\forms" directory): error = 2 CreateProcess, the system cannot find the file specified

  at java.lang.ProcessBuilder.start(ProcessBuilder.java:1048)

  at java.lang.Runtime.exec(Runtime.java:620)

  at java.lang.Runtime.exec(Runtime.java:450)

  at oracle.forms.servlet.RunformProcess.startProcess (unknown Source)

  to oracle.forms.servlet.RunformProcess. < init >(Unknown Source)

  to oracle.forms.servlet.RunformSession. < init >(Unknown Source)

  at oracle.forms.servlet.RunformSession.get (unknown Source)

  to oracle.forms.servlet.ListenerServlet$ Request.getRunformSession (unknown Source)

  to oracle.forms.servlet.ListenerServlet$ Request.getInfo (unknown Source)

  to oracle.forms.servlet.ListenerServlet$ Request.doGet (unknown Source)

  to oracle.forms.servlet.ListenerServlet$ Request.access$ 100 (unknown Source)

  at oracle.forms.servlet.ListenerServlet.doGet (unknown Source)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:687)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:286)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:260)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:137)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:350)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:141)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:649)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:124)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:232)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:94)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:224)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3654)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3620)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:326)

  at weblogic.security.service.SecurityManager.runAsForUserCode(SecurityManager.java:196)

  at weblogic.servlet.provider.WlsSecurityProvider.runAsForUserCode(WlsSecurityProvider.java:203)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:71)

  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2423)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2280)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2258)

  at weblogic.servlet.internal.ServletRequestImpl.runInternal(ServletRequestImpl.java:1626)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1586)

  to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:270)

  at weblogic.invocation.ComponentInvocationContextManager._runAs(ComponentInvocationContextManager.java:348)

  at weblogic.invocation.ComponentInvocationContextManager.runAs(ComponentInvocationContextManager.java:333)

  at weblogic.work.LivePartitionUtility.doRunWorkUnderContext(LivePartitionUtility.java:54)

  at weblogic.work.PartitionUtility.runWorkUnderContext(PartitionUtility.java:41)

  at weblogic.work.SelfTuningWorkManagerImpl.runWorkUnderContext(SelfTuningWorkManagerImpl.java:617)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:397)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:346)

  Caused by: java.io.IOException: CreateProcess = 2 error, the system cannot find the file specified

  at java.lang.ProcessImpl.create (Native Method)

  to java.lang.ProcessImpl. < init > (ProcessImpl.java:386)

  at java.lang.ProcessImpl.start(ProcessImpl.java:137)

  at java.lang.ProcessBuilder.start(ProcessBuilder.java:1029)

  ... more than 48

  ]]

  Please advice

  I have reinstall for weblogic and form of the components, I followed the steps you provided for me and eventually I was able to run the application before I faced the following error: ]] [2016 01-26 T 18: 17:08.504 + 03:00] [WLS_FORMS] [ERROR] [FRM-93534] [oracle.forms.servlet] [tid: 106] [username: ] [ecid: 0020c1e1-eee1-4f1f-8dfb-978730ca312d-0000003c,0] [APP: formsapp] [name of the partition: DOMAIN] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.1] [SRC_CLASS: oracle.forms.servlet.RunformProcess] [SRC_METHOD: startProcess] cannot run frmweb webfile = HTTP-0, the default startup command [2016 01-26 T 18: 17:08.504 + 03:00] [WLS_FORMS] [ERROR] [FRM-93535] [oracle.forms.servlet] [tid: 106] [username: ] [ecid: 0020c1e1-eee1-4f1f-8dfb-978730ca312d-0000003c,0] [APP: formsapp] [name of the partition: DOMAIN] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.1] [SRC_CLASS: oracle.forms.servlet.BaseServlet] [SRC_METHOD: logConnectionException] cannot create the enforcement process: cannot run the command to start [] java.io.IOException: cannot run program "frmweb" (in the "D:\Oracle_WL\Middleware\Oracle_Home\forms" directory): error = 14001 CreateProcess, the application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details at java.lang.ProcessBuilder.start(ProcessBuilder.java:1048) According to Microsoft error setting: Error message: "side-by-side configuration is incorrect." The machine is missing the correct C++ runtime components for your system type. (x 86 or x 64). Installation of the next update solved the problem. Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) I did the installation of the c library ++ and all ok thing.

• error message "cannot find your sd card, it can show abnormal."

  Hi ~

  I wanted to transfer my data from computer to droid but error message pop up, "cannot find your sd card, it can show abnormal" after l had clicked the button mount. So I cannot access to move my date for the droid here. I search in google and always found no right answer.

  I also checked in the system settings and space total is always available 14.83 GB. why it does not find the sd card that is alreay in the phone.

  Please let me know what to do. (My computer is MS xp professional 2002)

  If you get all your applications in the market so you don't have to check that the unknown sources box.  This setting is to be able to install an app that you don't get in the market.  If you want to look at your files on the SD card of your phone, you will need a file manager.  Personally, I like "Astro File Manager".  There are others available, but that's who I love.  If that does not answer your question please post again.  I think that I responded well.

• APP-FND-00806: the default value is not valid for the p_period_from segment

  We get this error when a user selects a date that is two years of one of our custom reports. I am fairly new to value sets, so I'm not sure what to include here. The parameter on which the problem has a custom value game which is a list of standard date format type values, but there is no validation of value.
  
  I have watched a few other items of metalink but have not yet find something that could solve this problem.

  Have you reviewed these docs?

  R12 - Standard presentation on how error - APP-FND-00806 the value xxxxxxis default invalid segment. ledger_id [815823.1 ID]
  "APP-FND-00806' error executing create accounting to the custom help responsibility [ID 1300931.1] program."
  Create accounting assets cannot be run from custom responsibilities [ID 1257416.1]
  Create accountants Fail with error APP-FND-00806 [ID 1189102.1]
  Impossible to run some reports of responsibility related to the custom Application APP-FND-00806 [ID 1436456.1]

  Thank you
  Hussein

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• XP - error: the system cannot find the specified file.

  I was installing Windows XP Service Pack 3 today and it worked very well until he came to update registry after the installation process, after what is happening the installation closes and then displays an error "the system cannot find the file specified." I tried to close all programs, and then restart and shut down everything that runs when the computer starts and which also failed.

  Hello
   
  
  1. have you downloaded the stand-alone package for the service Pack 3 or are you using Windows update?
  2. are you able to boot to the desktop now?
  
  Method 1.
  Run Disk Cleanup and disable the security software and t hen try the same installation and check.
  Want to t he article below for disk cleanup:
  http://support.Microsoft.com/kb/310312
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• Error 2: The system cannot find the specified file

  Failed to start the Windows Audio service on the local computer. Error 2: The system cannot find the specified file.

  Help, please
  Sam

  What version of Windows, including service pack (right click on my computer > properties)

  What past just before the problem arises?

  Click Start > run > services.msc > OK
  Scroll down to "Windows Audio"

  The Windows Audio service must be started and its "Startup type" should be "automatic".  If it is not started, double-click the entry and click on the Start button.  If it is unable to start the service or instead generates an error message, the file for the Audio Service may have become corrupt or deleted (although this file has to be protected by Windows File Protection).

  Search for your system (probably C :) drive
          
  audiosrv. DL (it's only one L)

  Make sure to look in the "system folders" "hidden files and folders," and "subfolders.

  You should find the audiosrv.dll (with two Ls) in C:\Windows\system32.

  If she is not there, it should be in C:\Windows\ServicePackFiles\i386

  If it's not there either, you have a file named audiosrv.dl_ in C:\i386?

• Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

  When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years? [1]

  5. is Firefox, Chrome or any other alternative browser installed?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

  7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  =====================================================================
  [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.

• Error 2: The system cannot find the specified file. Even after restarting the Printer Spooler service

  I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.

  Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?

  @Winston Microsoft M committed Support Engineer 'expert '.

  I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.

  Here is what I suggest to you, so you can learn how XP actually works:

  Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.

  Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak).  Now, the file is "absent".

  Restart normally.

  Then try to start the Print Spooler Service and you will see the error.

  So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.

  Please report your results.

  When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).

  Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.