App stack (Toad for Oracle) cause VM to black screen and disconnect?

Similar Questions

• Toad for Oracle 10.5 patterns

  Hello
  I'm using Toad for Oracle 10.5 and I don't have admin rights to any schema browser. I have a few questions about the copy of a diagram to another diagram. I DEV (development) and environments of TST (test) of tables, triggers, packages, etc. are created and manipulated. In addition, I don't know if this is the right forum for this question, but if not please direct me in the right direction. If there are no links, son, etc. who can help me please provide for me so I can review. Is there a way to Toad for Oracle copy a DEV scheme to another scheme TST? Are there measures that can achieve this, or does an Admin process. I'm trying to implement this on my own rather than send the job to administrators in my Department. Thanks for reading and taking the time to help me with this.

  I think you can exp. IMP, in any case you are planning / decided to try it for yourself, which can dare to stop you from that... :))

  http://toadfororacle.com/thread.jspa?threadID=27012

• Need to list of Vendors of Toad® for Oracle Xpert Edition

  Hi all
  
  I need a quick service you guys.
  
  Please let me know the vendors who can provide me with - Toad® for Oracle Xpert Edition version 9.0 or higher.
  
  It will be great if anyone of you could provide me with expected cost as well as the name of the seller if poosible.
  
  Thank you.

  Try CDW or SoftSearch .

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features...

  Original title: how to uninstall client services for netware?

  When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall client services for Netware... But it is impossible to find... Help?

  Hello LindsayJune,

  Click the Start button.
  Click on Control Panel. Select network connections
  Right click on 'Connect to the Local network', then click 'properties '.
  Search for "Client Service for NetWare" slot "this connection uses the following items."
  Click it, and then click the "Uninstall" button
  Restart your computer.

  Uninstall client for Netware feature will allow the option of quick change of user on your computer.

  I hope this helps.

• iXpand App update 1.4.2 - Select + button freezes the screen and blocking app

  After removing the SanDisk iXpand version 1.4.1 of my Air iPad app and my iPad Pro and then restart the devices - and then download and install the latest app iXpand 1.4.2 (available today 3/4) I still have problems with the app crashing.

  I have more 30 000 photos - too many auto save.  But I don't want to choose the pictures and albums from the Photos app on my IOS devices.  Whenever I have ' touch/tap' red + button at the bottom of the app from SanDisk to try to select photos or videos the IOS device screen freezes and then in 5-10 seconds after application crashes and takes back me to the home screen.

  The button + red works for any of you using IOS 9.2.1 on iPhone or iPad?  Present your reported this as a problem of technique SanDisk support and received a solution.

  It seems to me be a permissions problem.  I think that the app would need permission to access pictures on the film and in the Photos app.

  Any suggestions or ideas would be appreciated.  Thanks in advance! -Tom

  Now it works!  Simply update your devices to SanDisk iXpand App updated to version 1.6.1 (last version dated 14/03/2016) and now the Select + button works.  After updating the app, you can go to-> the settings-> iXpanD Sync and make sure Contacts and Photos (allow access to...) and power (green).

  Now I can choose any photo from my collection of more 30 000 and copy the original to any folder on the iXpand drive I want. Perfect!  No more crashing!

  BTW: You may need to wait a few seconds (depending on the size of your photo library) to the first screen of your photos to come.  With my 30,000 I wait about 30 seconds.  You can view the entire library, or you can view individual files from your library of photos IOS.  Very well.

  Thank you SanDisk coders to get this issue fixed!

• Windows XP starts with a black screen and hangs for two minutes before the end of the boot process.

  Original title: Windows xp slow at startup delayed to the office after you download the updated April 8,2011

  First time after updating, would start then black screen can see the cursor then took 20 minutes before Office input... now does the same thing but just a few minutes. What happens all started after the recent update April 8... something about a NET update? any IDE how to fix?

  Hi kaeli,.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you can start fine.

  Step 2: If he is able to start fine then try try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  See also:

  Computer stops responding with a black screen when you start Windows XP

• Disable the ability for applications prevent turn off the screen and start screen saver

  Hello

  I need to disable the ability of application full screen to turn off the screen and start screen saver. Basically just need to it:

  When there is no entry in the application that is running in full-screen, I want to turn on the screen saver and turn off the display. As far as I know, the windows default settings is to prevent turning on the screen saver during modes full screen.

  Thanks for the reply

  Hello

  Thanks for posting your query in Microsoft Community.

  According to the description, I understand that you have related questions screen saver settings in Windows.

  A screen saver is a program that, including the screen or filling it with moving images or patterns when the computer is not in use.

  Screensaver programs were designed to help avoid these effects by automatically changing the images on the screen during periods of user inactivity.

  Windows uses photos that better match your monitor for locking screen slide show.

  For more information: See photos on the desktop, start and the lock screen

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Cannot connect Toad for Oracle 9.6 to oracle 10g in a windows 7 64 bit

  Hey friends I am unable to connect with oracle 10 Toad in a 64-bit windows environment 7
  Help, please
  Any advice will be appreciated

  This can help:

  http://www.synergys.ca/index.php?option=com_lyftenbloggie&category=installation&Itemid=68&lang=en

  Apparently there are problems when you install the 32-bit version of TOAD in a directory containing the "()" chracters.

• How to perform the procedure packed (with some param) in TOAD for Oracle

  Hello.
  
  Could you help me
  How to run the packaged procedure with parameters in TOAD to Oralce...
  
  Thank you...

  Use anonymous PL/SQL block to run it.

  For example.

  DECLARE
     ;
  BEGIN
    .();
  END;
  

• Using Toad for Oracle

  Hi all
  
  I use Oracle 10 g worm. I am able to connect to this database using SQLDeveloper server.
  
  I recently installed the toad.
  I installed Oracle 10.2.0 Client to run the toad.
  And as I read tnsnames.ora must be created in $ORACLE_HOME/network/admin.
  
  But I don't see any network/admin directory structure in the $ORACLE_HOME.
  I manually created this structure and place tnsnames.ora here.
  The entries include the following:
  
  DUMMY_LIVE =
  (DESCRIPTION =
  (ADDRESS =
  (PROTOCOL = TCP)
  (Host = xxxx)
  (Port = 1521)
  )
  (CONNECT_DATA = (SID = xxx)
  )
  )
  
  When I run the Toad, oracle House (D:\oracle\product\10.2.0\client_1) is shown as valid.
  But when I connect to the database, the error "ORA - 12154:TNS: can not resolve the connect identifier specified" appears.
  
  Is someone can you please tell me where I'm going wrong?
  Where exactly should tnsnames.ora?
  
  Thanks in advance,
  Sandhya

  When you installed the Oracle Client, you must select the admin option. Only then you can see the record of $ORACLE_HOME/network/admin created and then place your tnsnames.ora live there.

  I don't know if this will help if you create this path manually.

• Do not get the audit trail for oracle solaris running. It starts and then stops after a few seconds. How can I set up a secure target Oracle Solaris? cure

  I have installation BSM on my solaris 10 Server. I configured BSM to be sent to syslog. I registered my target secure on the server of the AV type Oracle Solaris. Add an audit trail of pointing to the syslog file. The Audit Trail starts and stops after a few seconds. the error I get from the agent log is

  [2014 11-25 T 11: 36:38.647 + 02:00] [collfwk] [ERROR] [] [] [tid: 10] [ecid: 192.169.1.50:11353:1416908198895:0, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

  Instance of Error initializing AuditEventCollector

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  Nested exception:

  java.lang.NumberFormatException: for input string: "invalid audit trail: / var/adm."

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

  at java.lang.Integer.parseInt(Integer.java:449)

  in java.lang.Integer. < init > (Integer.java:660)

  to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

  to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

  at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  [2014 11-25 T 11: 47:49.248 + 02:00] [collfwk] [ERROR] [] [] [tid: 11] [ecid: 192.169.1.50:11353:1416908869249:1, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

  Instance of Error initializing AuditEventCollector

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  Nested exception:

  java.lang.NumberFormatException: for input string: "invalid audit trail: / var/audit.

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

  at java.lang.Integer.parseInt(Integer.java:449)

  in java.lang.Integer. < init > (Integer.java:660)

  to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

  to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

  at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  Can you please help with instructions/solution implementation of Oracle Solaris secure target? A beginner in Audit Vault.

  I have the installation path for the database and which works very well

  concerning

  Thanks for the pointers. After you add hostname to the location of the trail, the audit trail is running

• dv5 1002nr difficulty for the black screen and 2 flashing lights

  Hello!

  So I have this laptop (dv5 1002nr) and of course just after the warranty goes out did the laptop. This original computer was one of my friends who took to Best Buy Geek Squad and they told him to fix this laptop it would cost $400 if not more.

  So to make a long story short, she got a new computer and I helped get parameter and everything and then I asked for this laptop (I have set now free) did not work if I could have. He was a useless piece of junk so she agreed.

  After about an hour of resistance tests, transistors, etc., I can verify that all energy through the computer is as it should. I spent maybe 30 minutes on Google without success, and finally I decided to try everything. I started with the new ram without success. I tried all the silly little "trouble shooting tips" HP has for this laptop.  I'm running a little more than 2 hours working on this seemingly useless task when I finally managed to make it work.

  I did about 3 - 5 times now and it works every time.

  First I remove all the ram and then turn it on. (of course it doesn't)

  Turn the power off.

  Then remove the processor and turn it on. (attention)

  Disable.

  Put the processer back in and turn it on. (still not working)

  Disable.

  Put the ram back in and turn on.

  That's what I did and it works every time for me.

  Since I was only 17 and a little short on money I can't go just around portable computers purchase like these with this problem and test this further.

  If anyone has this problem please try this and let me know.

  Oh and HP. thank you very much your 'support' really helped me... at the expense of my portfolio.

  Oh and one thing...

  I did the 'live chat' and they said that my laptop having is not a display might be due to my hard drive or the motherboard.

  1. the hard drive would not effect my monitor does not. Or on a hard disk of the computer AFTER.

  2. except when he said to the motherboard he also lies the processor he was wrong, once again.

  3. it is a faulty laptop and I know other people have had this problem I hope, they read this insead of wasting their time with "HP support".

  GYM - after 2 years dead my DV-5 is back to life.

  Turn on your computer - press and hold what ESC - then the END button repeatedly.

  It worked for me

• Error Client Services for NetWare has disabled the Welcome screen and fast user, any change by changing the account settings

  Original title: "Client Services for NetWare."

  When I try to change my account settings, I get this message "client for NetWare has disabled the display of welcome and Fast User Switching.

  To restore these features, you must uninstall Client Services for Netware ".»

  I checked and the customer service is not installed on this computer.

  He puts this message up no matter what I try.

  What can I do to remove this problem?

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Error message when you try to turn on welcome screen or Fast User Switching

  http://support.Microsoft.com/kb/315347

• my built in web cam does not work, why. I had working for minute, but moved to the screen and he went

  my web cam isn.t work. When I turn on it says make sure it is turned on. How do I do that? Once when I clickrd on the icon, it came on but exploded when I moved to the screen. Now, I can't get it working again.

  Thanks for the help

  Hello

  
  1. What is the brand and model of the computer?
  2. you receive an error message or error code?
  
  Try the following and see if it helps.
  
  Method 1:
  
  Run the hardware troubleshooting tool.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:
  Step 1:
  Check if the webcam driver is listed in Device Manager
  Step 2:
  
  Try to disable the webcam and then turn it on and check if it helps.
  a. open the Device Manager.
  b. click on imaging devices.
  c. right-click on the Webcam device.
  d. Select Disable.
  Note: Try the steps up to the c and select on to activate the webcam.
  Method 3:
  
  I suggest you install the latest updates for Webcam and check if it helps.
  
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Note: If you still have the problem then I suggest to uninstall and reinstall the webcam software and check if it helps.
  
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program