Apple dashboard - coldfusion help docs Widget

Similar Questions

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my serial No.

  I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my own serial number adobe can give me a link or any suggestion for me? ! Thank you very much

  Download through the page linked below and use the serial number, you need to activate it.

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• Former owner will not take the time to remove his ACCT. I have his name, number, address, serial number, imei of the device. I've added it to my Verizon plan. I can't activate it! Apple won't help me but him?

  Former owner is not the time to remove the device from his account. I have his name, number, address, serial number and imei of iphone.  I always had of BONE cell phones, but my daughter IOS. I made sure that the IMEI was clean and it was not on the black list before adding it to my Verizon account. Now, I learned about icloud.  Verizon has brought his number to the iphone and now she has no phone to use. I called apple, but I was told that they could not help me, but they might help the original owner.  They original owner is older and perhaps confused after I tried to explain what I've learned.  What can I do when the original owner is/was/still confused about how the system works?  I'm always lost in this world of apple.

  It sounds as if this iPhone is locked in Activation.  Here is the complete description of locking Activation:

  Find my iPhone Activation Lock - Apple Support

  Assuming that the former owner is ready (but simply not able) to help you, maybe if you contact the owner and his or her through the directions above, you'll be all set.

• Apple ID lockout - HELP Please

  Hoping someone can help me find my iPad old dads for him.

  I managed to fix it for him after he threw it on the floor using google/here, but I could not sign in its identifier Apple at the time that he does not accept the email address, that he insisted was right.

  I don't live nearby, so I brought home with me a while to try and fix it again, but I found just today an e-mail address of talk talk very old for him & Eureka!, he agreed with the password we both knew to be correct.

  Then only he told me that the account has been suspended - takes me to a page with security questions - which he can't remember the answers to (it is 80 & sick right now) he also tells me that he thinks her cat destroyed a laptop that I wrote all the passwords and emulsion for his different accounts - original so I'm he detached a little

  I guessed one of the answers correctly, but of course I don't remember that one - now goes a little later with the other and he won't let me new & insists on sending emails only-, but that the talktalk email address no longer exists

  I remember at the time to help him set up the AppleID, I gave my own email as a backup for his AppleID account e-mail address, so I could help I hope that if something like this happened - but I don't see anyway to get Apple to send to this e-mail address, rather than the deceased talktalk one

  I'm pulling out my hair here - is it possible? and if so, how would you please

  Thank you

  You can't change where the reset email goes - (you can but only when you have full access to the account, including the ability to respond to security issues). If you cannot reset email, you will need to contact Apple support: Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• Won't let me connect to Apple ID! Help, please!

  I can't connect to my Apple ID in my 5s or on the Internet. Rpet purc cannot be treated. Cannot update or download something from the App Store. Tried to change date of a coming year, changed my password to login and have my phone reatarted. Help, please! Won't reset if possible because my laptop packed and I can't back up not everything!

  Sorry for my auto correct fail here! PURC is lying be purchas and reatarted is supposed to say restarted

• The Apple Store will help to reinstall a previous version of BEEF on a Mac Pro?

  An Apple store location will help reinstall a previous version of BEEF?

  Thank you

  Usually, they will do it. Make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• I bought the iPhone 6 s without contract. When I tried to activate it, I can't, because "the SIM card is not supported...". ». Support Apple refuses to help me even to say what company locked my new legally purchsed iPhone. What should do? I have

  I bought the new iPhone 6s at the Target store without a contract. When I put my SIM card, iPhone infomed me that it can not be activated.

  The phone is new, legal, covered by warranty accroding Apple its database.

  I called Apple support twice, they said it has been locked by someone, but can't even say the name of the company, which has locked and why.

  Thus, Apple recommended just support me nothing. NOTHING! They even did not provide me the name of the manager who can help me in this situation.

  I called T-Mobile, thay said that they don't lock this device.

  Even the ATT has not answered all my requests.

  Now, I'm dead gold Ibrik. What should do?

  PS. I am totally disappointed by Apple's policy and support. It's terrible that the company with these brilliant products has this terrible attention legal clients.

  Go to the place where you bought this phone and ask for a refund.

• I can't remove Flight mode of Apple Watch, need help!

  When I turn airplane mode on my iphone 6 does the same thing on Apple Watch (which is ok), but when I disable the airplane on the Iphone mode, Apple Watch keeps saying it is only locked due is on airplane mode, in other words, after you apply the change on the Iphone, Apple Watch does not change.

  I have to disable the Apple Watch and then be able to turn on normally, it works the first time, but I ran into a few cases I need to reboot twice. I'm sure it's a matter of buggy that apple will correct.

  In the meantime, I tried to set up a password (4 digits), however, I don't option on the Iphone app shows like turn off, when I try to drag him 'unlock iPhone' it won't work, also when I tried to drag on the "Simple Code" function it looks like fade. So I'm stuck right now.

  Can someone help me how to solve this problem? is this a bug or a faulty Apple Watch?

  Hi, Carlos

  What you have described is the correct behavior. It is possible to activate airplane Mode to be mirrored between the devices, but the same does not apply to disable the mode, which must be done separately on each.

  To change the setting for mirroring of the turn on airplane mode:

  -On your iPhone, in the application of Eve, go to: Watch My > General > airplane Mode - enable or disable the iPhone, to choose mirror.

  When the watch is in Airplane Mode, Bluetooth and Wi - Fi turned off, so there is no way for it to receive additional instructions from your iPhone (including a statement to exit the airplane Mode when the mode on your iPhone).

  To turn off the airplane on your watch Mode:

  -When you view the time on your watch, drag to the top of the lower edge of the watch face > drag left/right to the gaze of settings > press airplane Mode to turn off the mode > slide down on the screen to exit the looks.

• I want to reset my question in my apple ID * please help me

  Please I need your help to reset my question answers because the reset email, I do not know it *.

  You have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (137520)

• Find my iPhone still connected to the old Apple ID! Help!

  I changed this past weekend, cell phone companies so I had to get a new phone. I have the 6 s. Verizon requires you to send in your old iPhone wiped back to factory settings, but I can't do that until I disable Find My iPhone. But when I go to stop, she wants the password to a previous email address, I used for my Apple ID I changed to this e-mail a few months because it wasn't my primary address more. All other update smoothly, except for find my iPhone. It always seems connected to my old email address. And I can't disconnect because no password doesn't seem to work. When I try to connect with the old mail, it says Apple does not recognize this ID.

  Help, please! I have only one week to post in my old phone.

  Go to icloud.com and connect with your new credentials.  You see your phone in the list to find my iphone?

  Trigger the command erase and then remove it from your account.

• Help with widget slider in CP8

  Hello world!

  I am a user of a purchased slider widget control and I saw excerpts of how start with her, variables etc. Although it still seems I need extra help.

  I am creating an interaction where the student can drag the slider handle (with variable numbers defined in the settings of the widget of) and different images will display according to the number of the handle is pulled in.

  For example:

  • When the handle is pulled to 1, then a photo X will change from hidden to display.
  • When the handle is pulled to 2, then Photo X used to hide again and picture shows up and so on.
  • I wish that on the contrary happen, when you pull the rear handle to start point 0; the pictures will show and disappear but to reverse the order. (Maybe, it would be the "reverse polarity"?)

  Anyone here who knows how to do this (in exact order)? Really appreciate it!

  Kind regards

  S

  Hi Sandra,.

  For this interaction, firstly, you need to configure the widget so that his action of success will work continuously. We then hang in a tip read variable of the downhill Action.

  First in the component Properties of the Widget window menu, make sure that the variable has a minimum value of 0 and an maximum value equal to the number of images to display PLUS ONE. So if you have pictures of four , the minimum would be 0 and the maximum value would be 5. Set up the rest of the component options you want. I'm going to assume the name of the variable, that the slider is connected is called the cursor. This will become important when you make the fast Action.

  Go to the menu of the success and failure . By default, assess the success or failure is disabled. Click the button to turn it on. Under evaluate success or failure select continuously. Under the requirements of success choose value choose Score greater than or equal to and drag the slider to the left, so the lowest value is selected. This will cause the widget trigger its action of success on every frame of the movie (which its present on the timeline for). Turn off the failure requirements and make sure reset criteria of rupture for the success is turned on. The widget is now fully configured. Click OK to save your settings.

  In the design Captivate environment, select the widget. In the Properties Panel, select the Actions submenu. Under the successful drop-down, select Execute Advanced Action and create a new tip Action.

  You should do an conditional, Action name is not important, but don't forget to remember it. In the first decision to write the following condition under section perform the action so : cursor [variable] is less or equal to 1 [literal]

  Hide all of the images that you want to hide and show the one to display when the handle is on the first quadrant under Actions .

  Record the action and move to the next decision. Under the new decision, you will write a condition: cursor [variable] [literal] is equal to 2

  Under the action, hide and show images depending on how the interaction should appear when the cursor handle is located above the second quadrant.

  Continue to take new decisions up to the maximum number that you assign to the max value of the widget the cursor. Each action following the same model

  cursor [variable] is equal to 3 [literal]

  cursor [variable] is equal to 4 [literal]

  cursor [variable] is equal to 5 [literal]

  So on to what the last one that is (if we got six pictures):

  cursor [variable] is greater than or equal to 6 [literal]

  In the action in respect of each decision, hide and show the images.

  Record the action. Close the dialog box advanced Actions, and ensure that the right to the peak Action is chosen for the successful action slider.

  Also, be sure that the Success/Failure break subtitles is turned off.

  I tested this configuration and it works pretty well for me.

• Accidentally saved to PDF, now impossible to change how to get back to HELP doc. !!

  Hello and HELP.  Accidentally, I recorded my document to PDF without saving it in word.  Now, I can not change or modify my hard work.  Is it possible to get it in Adobe?

  Acrobat Reader (the forum that you asked the question in) cannot export the contents of a PDF page.

  To do this, you could buy Acrobat Pro (a desktop application) to export to TXT, RTF, DOC or DOCX.

  Or you could subscribe to the online PDF Service "Export PDF".

  Be well...

• Please help doc

  Hello
  
  I read link below:
  
  http://docs.Oracle.com/CD/E11882_01/network.112/e10836/listenercfg.htm#i490371
  
  See also on this page there is the section:
  
  Oracle Real Application Clusters Administration and Deployment Guide to learn how to Configure listeners to distance (also called SCAN listeners) in an Oracle RAC environment
  
  When I click it, it redirect me to the large table of content page, so I'm not find doc page to configure the remote receiver to the CCR help me, i.e. in what link I will obtain the information requested.
  
  Thank you.

  Yes, REMOTE_LISTENER from this page Index takes you there
  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16795/hafeats.htm#sthref499

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16795/hafeats.htm#BABGIHBJ: load balancing Client-side

  Hemant K Collette

• HAL helps Docs

  Hi all
  
  I'm working on HAL for the first time. I'm looking for some docs help on HAL.but was not found on the NET.
  
  Anyone of you could help me please with the docs.
  
  
  Appreciate your help.

  Check your emails!

  See you soon,.
  Alp