Apple iPod nano (5th generation)

I have installed imesh10 but when I connect my usb agreement to my computer, imesh doesn't recognize my ipod. How can I solve this problem?

Hi Soloveno,

iMesh supports most iPod types, but not all
To find out if it's a technical problem or a device not supported, open a ticket throguh the support section at http://www.imesh.com
(select one for the subject and the problem and press the button no, 'I need help')
Describe the exact type of iPod and the problem.

Tags: Windows

Similar Questions

  • Apple iPod Nano (6th generation)

    Is it possible to download music from my windows media player library in Apple
    iPod nano (6th generation)?

    Ask the question in the Apple Forums:
    https://discussions.Apple.com/index.jspa

  • How to check if no warranty if left on apple ipod nano 7th generation.

    How will I, me, know how, much, guaranteed, is, on the left, in, my, Pod, Nan, Gen., me, I, tried to use, apple, Webster, I, then, signed, in, my, apple, ID, but then, it, request, for, a, hase purc, date, if I, knew this, I have, would not, need to check, on, which, under warranty, is, left, all, advice

    Your media profile for registered purchases

  • iPod Nano 7th generation backlight

    The backlight for an Apple iPod Nano 7th generation is adjustable to turn off? I just purchased one and can not understand. For my iPod Classic, I put the backlight turns off after a few seconds. That's what I want to do with the iPod Nano 7th generation.

    Hi WKE066,

    I understand that you want to disable the backlight on your iPod Nano. I know it's important to be able to manage your devices to your liking, so I'm happy to provide advice to help with this.

    To access your settings backlight iPod nano:

    1. Click on the menu button (top of the click wheel) until you reach your home screen
    2. Then, scroll to the bottom and click on settings
    3. Highlight and select the "General" options
    4. Select the backlight to access all of the available choices

    Here, you will find the options which you are familiar.

    Thank you for using communities of Apple Support, cheers!

  • Why don't you have the Apple Watch app on my iPod touch 5th generation?

    I just got a Apple Watch and I wanted it to connect to my iPod. But when I looked for the Apple Watch app, my iPod touch 5th generation did not. Why the iPoEs cannot have the app Apple Watch?

    You can provide your comments to http://www.apple.com/feedback

  • How can I get my songs Apple music on my iPod Nano? I pay $15 a month for the service and cannot listen to songs on my iPod Nano 7th generation.

    I pay $15 a month for the service of music and cannot hear the songs on my iPod Nano 7th generation. Someone must have found a way around this now? I might as well sell my iPod, because I'm not paying for the song in iTunes as well.

    You can not.  Downloads music from Apple are written songs, does not belong to him. Apple music requires an Internet connection, so that the status of your subscription can be verified (as required by the content producers).  The only iPod that can use music Apple's iPod touch, because there Internet by Wi - Fi.

  • Why iPod nano 7th generation does not support Khmer language? New update for this problem please Apple release?

    Why iPod nano 7th generation does not support Khmer language with the latest version 1.1.1? Apple could release a new update for this problem?

    I am from Cambodia, I love Apple products, so I need Khmer language with all Apple devices!

    Thank you!

    For Apple to see your application, you should repost it to

    http://www.Apple.com/feedback

  • ipod nano 5 generation nuevo bateria, lasted 5 minutos

    Hola, me han regalado UN Ipod Nano 5 generation (supongo than otro regalo guardado vendria) totally nuevo y con su original precinto, creo as el modelo data 2010 y tras abrirlo y fornuis el operating system y tras mas of the 3 carga of the bateria horas, cuando el icono of mima da lleno lo pongo a produce y se me descarga in unos 5 minutos , this operation he performed several veces y sigue pasando lo mismo, Apple me as soon as the product is're obsoleto y Québec no tienen retouren para el problema, además of that delivery the caducada esta garantia (esto ultimo lo entiendo) pero el una empresa como Apple no tenga media dress sus productos uno are a poco preocupante.

    If alguien conoce alguna manera poder recover the bateria este modelo is me lo indicara

    Saludos

    Chesus

    I'm sorry that I can't answer in Spanish.  I used Google Translate.

    Lithium batteries can become unable to hold a charge, if left in a State completely drained for a long period.  Given that the iPod was never opened and charged, which could be the reason that the battery of the iPod does not hold a charge now.

    Apple can no longer service the 5th generation iPod nano, but if you do a search on the Internet, there may be electronics independent repair companies in your area familiar with Apple.  The drum part is available online.  This web site illustrates the procedure

    https://www.iFixit.com/device/iPod_Nano_5th_Generation

  • My Ipod nano 6th generation is not be picked up by the new Itunes

    This happened once before, after updating to itunes it no longer recognizes my Ipod nano 6th generation

    Hello Bandit320,

    Welcome to Apple Support communities.

    If iTunes on your computer Windows running Windows 10 is not recognizing your iPod nano, then I suggest that you go through the steps described in the following link:

    If iTunes does not recognize your iPhone, iPad, or iPod

    Take care.

  • My iPod nano 2nd generation gets disk errors after installing iTunes?

    I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until now and I have not really money to spend to get a new, in particular the fact that practically it still works fine on his own, just that I can not add or remove pieces of her more.

    The problem

    It seems that the computer has trouble reading the device. Whenever I plug my iPod nano 2nd generation USB in my laptop (Windows 10), which has some sort of interaction with it freezes. For the moment I plug in, programs such as Winamp, iTunes, File Explorer (if I click my computer-> try to right click on the drive, that says all F: drive instead of the usual name recognized as "My iPod."), the Device Manager when I try to turn Apple iPod USB Driver and the small icon in the system tray when you try to eject the drop-down list no longer appears, all these programs themselves just freeze and unresponsive until I unplug the device. In Event Viewer, the moment where I plug it, it gets spammed by looping errors to:

    Error: The device, \Device\Harddisk1\DR21, has a bad block.

    ATTENTION: An error was detected on device \Device\Harddisk1\DR21 during a paging operation.

    So, basically, it seems that the computer is blocked just not try to read and recognize the device, which means that I can't really do anything with it. The iPod itself seems to work fine, I can hear songs, recharge the battery and other things, earlier I can't add or remove pieces of her.

    Stuff leading up to it

    A year or two before, I used to manage the ipod via itunes (a relatively old version of time too I guess since I almost never update) until I formatted my laptop some time ago and never bored computer reinstall itunes. Since then, I really didn't need to change anything to my iPod and just use Winamp (my default music player) to the add/remove songs when I needed to. Today, I decided to install iTunes because there are some things that winamp cannot do as add embedded lyrics and also winamp blurs the sorted list of the song. Since then, after you have installed the new iTunes, start freezing and program I get the problems described above. There might be a chance that iTunes was not the real culprit and the disc was already beginning to get corrupted or something somehow, but I can't think of anything that's happened before this problem started.

    I tried many things

    • Uninstalled iTunes and all the other stuff related to the installation as pie, Apple Mobile Device Support... .etc
    • Reinstall the device driver USB Apple iPod. When I turn it off (Plug in iPod-> iPod poster 'do not disconnect'-->--> Device Manager driver right click-> disable-> Device Manager freezes up-> unplug ipod-> Device Manager-> thaws plug ipod in) ipod becomes simply the State of charge. Steps to reinstall is the same (need to plug and unplug).
    • Reset iPod in now the Center button + menu button.
    • Will then resetting operation rewind + Centre button iPod diagnostic mode. It is not a test disc hard because I guess nano doesn't have a disc hard just flash ram. Anyway, when I select SDRAM QScan he only says: "SDRAM OK." NAND_SPEC gives "NandLBA = 1982464". Flash gives Checksum "Checksum is 0x26AF".
    • Wanted to try as described here to check for disk errors, but cannot because the computer cannot correctly recognize and explore freezes if I right click. I tried using 'chkdsk f:' in the command prompt, but that seems to hang as well.
    • Switches mode disc reset ipod then now Center + play button. Then connect the laptop... etc, same problem.

    It's a pretty old device, so it seems that support because it is very rare. I didn't install iTunes could screw up the device that it is intended to support and do anything as permanent as this one.

    You must exclude a faulty USB, cable anchorage, try another, or using your power with another Apple device cable, to confirm that it works correctly.

    Otherwise, your troubleshooting seems complete.  If that's what you've done for disc Mode

    How to put your iPod in disc - Apple Support mode

    and connection to your computer causes this issue General 'freeze' with multiple processes, the iPod has possibly a hardware problem.  Flash storage eventually.  Or it can be a problem on the logic board of the iPod.

    I suggest try to reformat the iPod using Windows, as if it were a USB flash drive.  But you can only do if the system hangs when you connect iPod.

    NOTE: If you find a way to reformat iPod using Windows, use FAT32 as the disc format.  If there is an option to do a quick format, do a full format instead.  Once the process is complete, the iPod is totally blank.  You do restore using iTunes (if you are prompted or not), to the embedded iPod software.

  • Where can I watch videos on my ipod nano 4th generation?

    I have an iPod nano 4th generation that has the songs and 3 videos downloaded on it. However, I don't know where to go to see these videos. What should I do?

    Open the video application.

    http://www.Apple.com/iPod-nano/

  • iPod Touch 5th generation will 20% < 10-minute auto-off battery

    When my iPod Touch 5th generation gives me a 20% battery warning, it is not same exact distance - the thing turns off within 10 minutes of use. 100% to 20% takes days and days, but the latter so-called 20% is wildly inaccurate.

    I tried to let him stay off for 10 to 12 hours before recharging, hoping that it would be to calibrate the battery, but no luck.

    Someone at - it suggestions?

    % battery is not accurate on an iPod. If there are sufficient autonomy I would do anything.

    You can try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Fee for at least 8 hours

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    -Restore factory settings/new iOS device.

  • iPod touch 5th generation 9.3

    Is the recent 9.3 update available for the iPod touch 5th generation? IOS display 9.2.1. Your iPod software is updated over the air and on iTunes via the cable. Did a restore without change.

    Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems.

  • iPod Nano 4th generation - battery problem

    Hello

    I have an iPod Nano 4th generation and I love it. But recently, I see that the backup battery is very poor (difficult to get 2-3 hours of continuous music playing). I went to the service center, but unfortunately, they say that there is no possibility to replace the battery or iPod, even if I'm ready for the paid service, because the warranty is void

    The only option left for me is to use it until it works (until the battery is completely dead) and then throw it away. Y at - it any other option left, I'm not aware of.

    Kind regards

    Girish

    If you do a search on the Internet for the independent repair companies in your area, you can find one knowing well Apple that will make the replacement of the battery.  In this case, the technician didn't need to be "certified" officially by Apple because it is not a warranty repair.  Technology needs of having an experience.

    You can do it yourself, if you are technically inclined.  This web site has repair guides

    https://www.iFixit.com/device/iPod_Nano_4th_Generation

    and third spare batteries are available on eBay and other online sellers.

  • iPod Touch 5th generation ios 9.1 not save pictures.

    Hello everyone

    Christmas 2014 I went out and bought the iPod Touch 5th generation, the model I bought was the model of 16 GB of 2014.

    So far the camera has been working well, but just earlier today, my iPod Touch will not be for some strange reason save all the pictures that I take with the camera. It is a real problem for me, and if anyone knows how I can fix then please leave a comment.

    I still 4GB available if my memory is not full.

    Thank you

    Try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    Note that iOS 9.2 was released yesterday and this restoration Update 9.2

    -Restore factory settings/new iOS device.

    If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

Maybe you are looking for

  • 42 error code when you try to delete the file

    PDF file which can be opened and read.  However, when you try to delete the file, error file not found 42 made its appearance.  MacBook Pro computer

  • Screen Retina MacBook Pro will not wake up

    As I turn my macbook pro to El Capitan, I get a black screen after waking up, and then I Force shutdown. I tried several times reset PRAM and SMC, but it won't work. I get the same thing. On the newspapers I get the same error messages even if I was

  • Satellite C660 - can not get sign @.

    Hello I have the Toshiba Satellite C660. On several pages that I need to fill my adres e-mail on the internet it apears as: itsme "athome.nl instead [email protected]. "I use the shift-2 = @ but it shows" Can anyone help?

  • Code 19 device fingerprint scanner

    Hello I recently lost the use of my cell phone on my HP Envy 15-j092nr fingerprint reader. I get a code 19 for sensors of validity under biometric devices in the Device Manager window and I was wondering how I can get it working again. I tried a few

  • While trying to install a Linksys E1500 he repeats that my computer is not connected to the router.

    Computer problems and the router I have a windows xp 2002 with service Pack 3. While trying to install a Linksys E1500 he repeats that my computer is not connected to the router. Ive tried a new cable and it does not solve the problem. He also said t