Apple TV 4 Audio pass through

Similar Questions

• using PostDelayedCall how to get the value passed through void * callbackData?

  Can someone tell me how to get the data passed through void * callbackData?

  The following code, panel_ptr has the right address but still contains zero.

  void CVICALLBACK value_changed (void * callbackData)
  {
  int * panel_ptr;
   
  panel_ptr = callbackData;
  calculate_new_value (* panel_ptr);
  }

  int sign;

  Panel = 2;

  PostDelayedCall (value_changed & Panel, 0.2);

  The problem is using the callbackData parameter if it is a pointer, it must be a pointer to something which is still topical at the moment that the callback executes. That is to say, you cannot pass the pointer to a local variable in callbackData as when the callback executes the pointer is no longer valid. You can switch from its value, instead, in this way:

  ... SomeFunction)

  {

  int sign;

  ...

  Panel = 2;

  PostDelayedCall (value_changed, (void *) Panel, 0.2);

  ...

  }

  void CVICALLBACK value_changed (void * callbackData)
  {
  int panel_ptr;
   
  panel_ptr = (int) callbackData;

  calculate_new_value (panel_ptr);

  return;
  }

  There are many discussions on the forums on callbackData parameter that you might want to read.

• receive unknown audio streams: How can I get rid of an external audio stream through my laptop? It sounds like a radio station.

  How can I get rid of an external audio stream through my laptop? It sounds like a radio station.

  Try this 1:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Configuration of VMware ESX 5.1/5.5 pass through for PowerEdge 2970

  Hello

  I tried to configure VMware ESX 5.1/5.5 pass through for a 8 GB Qlogic FC HBA on PowerEdge 2970 server.

  Even after activation of the virtual technology in the BIOS, the PCI device is not listed in "Advanced settings" to configure pass-through. Attached screenshot shows the current setting of the processor.

  Y at - it all the additional steps required to configure it.

  Concerning

  E.

  Hello Sara

  You're talking Direct path IO or single root i/o virtualization? If so, none of these features are supported on the 2970 system.

  http://www.VMware.com/resources/compatibility/search.php

  I don't think that or the other of these characteristics were available until our 11 generation systems.

  Thank you

• Pass through IPSEC on Cisco 857

  Hello people!

  I have gained reciently a Cisco 857 router. I want to do a site-to-site VPN.

  I set up the ATM0.1 with "ip unnumbered" VLAN 1 interface. I have not configured the router to enable NAT or PAT. VLAN 1 is configured with a public Ip of my ISP address. Behind the cisco router, I have a Zywall 5, this device is my VPN gateway. Initially, it works very well with the other soho router but it blocks often, for this reason, I decided to change it for a cisco router.

  My problem now is that the cisco router does not allow the implementation of VPN.

  Need to activate the IPSEC pass-through?, how can I do this?

  Thanks in advance!

  If you connect through the console:

  recording console 7

  If you connect via telnet:

  farm forestry monitor 7

  monitor terminal

  Concerning

  Farrukh

• WRV200 VPN pass through limits

  We use a Cisco Small Business WRV200 to allow guests to our office to access the public internet, regardless of our corporate network environment. We regularly invited several visit of a company and generally these users connect to their company via a local VPN client. I noticed that after about 5 users activate successfully their VPN clients that no one else can connect to any other VPN tunnels. Internet connectivity still works when these 5 tunnels are active, but no other users can create a VPN tunnel after this point. Again, these are all movers or Pass through tunnels behind the WRV200 in one single environment NAT. is there a limit on vpn pass through or leaving behind this device connections and if so can it be changed? I expect a resolution of firmware to this problem, but it seems that it is only a single firmware version for this device. If this unit has an immutable limit, can then someone propose another product, Cisco Small Business wireless which has no limit of transmission?

  Thank you...

  If the NAT - T is enabled on clients and VPN gateways, there should be no problem. Otherwise, if two IPsec clients behind WRV200 are trying to connect to the same remote gateway without NAT - T active, 2 IPsec sessions could clash between them.

• Launch the Application IT Assistant with pass through authentication

  We have started to purchase DELL servers after many years using HP.  As such, we now need ot use DELL IT Assistant for our hardware monitoring.

  I am use IT assistant to go to the tool Server to my windows but server during the launch of the Web page I have to re-enter my credentials.

  Is it possible to have pass through authentication, whereas when I leave IT Assistant application launch so I don't have to enter a user name and password for the server administrator?

  Thank you

  Otte

  
  

• Golden Gate 12 c 1z1-447 will become available on view of scheduling? or is it passed through the beta process

  Hello

  Golden Gate 12 c 1z1-447 will become available on view of scheduling? or is it passed through the beta process.

  I remember never 1z0 - 447 Oracle 12 c Golden Gate Essentials review be a review.

  He has demonstrated lately on the oracle website.

  but I don't see it on the site of the view.

  I thought it was supposed to become available to plan August 8.

  Roger

  Looks like someone screwed up PV.  When you click on the "View reviews" link on the main page of Oracle to PearsonVue 1Z1-447 appears under «Other reviews"rather than «beta reviews»

  

• STR-DH520 - pass through

  Why my camera starts when I turn on my my TV to the receiver input. I have my ps3 connected to the receiver, then the receiver to the TV. I don't want the receiver all the time. But when I turn on the TV to the hdmi input, my receiver turns on. I have so I have to turn off the receiver and then continue 5000mAh mode.

  Rrangel,

  If you just reset your receiver and then you have to turn ON HDMI Pass Through.  It can also be beneficial for reference manual STRDH520 to understand what settings are available and how to use them to achieve your desired results.

  Settings HDMI (page 60)

  Control for HDMI [CTRL. HDMI] ON BY DEFAULT - CHANGE to OFF

  Passage of Signal HDMI in [COL. THRU] OFF BY DEFAULT-CHANGE on

• I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' Mac; failed hard drive. Everything seems fine, activation passes through, but when I go to start the program, nothing. Nada. No respo

  I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' MacBook Pro; failed hard drive. Then, new facility, MBP 13 "most recent. Everything seems fine, activation ADOBE passes through, but when I go to launch the APPLICATION, nothing. Nada. No response from the application. Suggestions?

  Acrobat 9 (and 8, of course) is not compatible with your operating system.

• Card reader chip as a pass through for VMware View 5.1 device (NOT USED for AUTHENTICATION)

  I try to get a USB Smart Card Reader * to work on related under VMware View 5.1 clones

  * not as an authentication device, just like a transmission of smart card reader

  Not tried:

  1 activated pass through card reader in the registry for the VMware view client

  2. active "allow redirection of card reader" in the policy active directory

  3. customer connected to view, selected USB drive list, connected to the customer

  After that, the card reader will appear with a "generic smart card", but it does not actually work.

  We executed the diagnosis of the smart card and he pointed out that the drivers are ok and windows service is ok, but the map can not be found.

  PS: When we tried first, about 2 weeks ago it worked, but it has suddenly stopped working. (Needless to say that the virtual machines and the Clients were restarted several times).

  Check that you have not installed the "PCoIP smart card Redirection" option during the installation of the agent. If it is present, it will redirect calls made RDP client smart card. Because you use a 'local' to the desktop USB drive, you don't want to do.

• 15 n series Pavilion: Pavilion 15 computer n097sa laptop. L and R audio that passes through the two speakers at the same time.

  Hi, so basically, I just upgraded to this laptop 15 n097sa (new to me) of my old sucks, and it's so much better.
  Only, I just noticed that when his left or right is out at the same time the two speakers. I noticed you access with your headphones. the left certainly comes out the left a little more and the right thus respectively, but they always come out of two speakers much.
  To clarify that, the only left channel is coming from the two speakers at the same time, instead of just the left speaker. And similarly for the right channel.
  I only did a real test on youtube videos of stereo test, even I tested it on my old acer before, that came out of the correct speakers.
  I have a sound dts, no matter who is and it could be reduced to just change the settings, but I don't think that's it.
  Does anyone else have or had this problem too?
  I know I'm a sucker for pc, but please go steady on me, your.
  Win pro 8.1.

  will you please and thank you very much indeed, couch.

  Malygris1 wrote:

  Hi there @SofaQueue

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with the audio balance on your laptop, and I am happy to help you with this. First of all, I would say reinstall the audio driver.

  ETC.

  Let me know if you still have problems and view the details of what happens.

  I will mark it as resolved now. Very useful, thanks.
  What I found was the following: I have really no problem at all, it was the parameters of the audio DTS after all.
  Simply turn off the audio improvements and testing showed once again that's all it was.
  

  Thanks again though, nice to see people are willing to help so much!

  Edit: Is PS it OK to mark my answer as a solution? I don't care if or whatnot, it just is the right answer and makes sense. I'll do it if he lets me.

• Apple Watch can play music through its built-in speaker?

  I do a decent amount of race and the latter I ran with my phone and just play music on the built-in speaker. It's nice to not have to helmet bouncing around and it feels safer because you can hear the traffic and so on.

  When first announced, I was under the impression, given that a built-in speakerphone, you'd be able to play the music stored on the watch through said pregnant. I haven't seen all the posts about this and now think that it is false.

  So that you can?

  Obviously, the quality and the volume would be questionable, but still, I feel that it would be nice to have the option. Thank you!

  Hello

  It is not possible to play music from the playlist synchronized via the loudspeaker on Apple Watch.

  On the contrary, your watch can be coupled with a Bluetooth headset to listen to music when you run.

  More information:

  Listen to music on your Apple Watch - Apple Support

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

• Cannot send pictures from iPhoto using Outlook. Messages pass through but no images.

  I read the Apple help page referenced in other queries, but it did not help me. When I try to send a photo from iPhoto using Outlook (my default mail program associated with a Gmail account), the message goes through but not the picture. I checked the emails contained in iPhoto preferences and Outlook and iCloud are there, but doesn't seem to work I have to drag the photos on the desktop and then attach them to an email in Outlook, but I think the image quality suffers.

  Has anyone else had a problem with Outlook? Is it simply not possible to use the two together?

  Thanks in advance for your suggestions.

  What version of iPhoto? and the operating system?

  Exactly how you share to Outlook?

• No audio signal through HDMI (dv9700t CTO)

  HP Pavilion dv9700t CTO Entertainment Notebook PC / Windows Vista 64-bit

  I put the audio device by default for the device "Realtek Digital Output. I have no sound.

  I've updated the audio drivers on the HP support site. Still no sound via HDMI. (the microphone quality was reduced at the point of being worthless)

  I have updated the drivers with drivers from the site Web of Realtek. Still no sound via HDMI. (I found micro feature)

  The box of bolt that I'm trying to connect to indicates that there is no audio signal passed him from this source (my laptop). I even tried to connect directly to the tv. Which doesn't work anymore.

  Its almost as if there was no link between the audio and HDMI port.

  

  Message edited by Slybo on 12/23/2008 06:22
  Message edited by Slybo on 12/23/2008 06:24

  I have dv9758ca and I have the same problem. No sound with the yamaha receiver. I sound with my LG TV and I tried with an Onkiyo recevier and it worked.

  Once I had the sound on the yamaha (was a flook). the image was running on the TV and the screen of the computer (which is not normal) at the same time. then I concluded that the problem is the HDCP protection. the yamaha recevier is HDCP.

  I've still did not know what the solution is, I just wanted to share my experience