Card reader chip as a pass through for VMware View 5.1 device (NOT USED for AUTHENTICATION)

Similar Questions

• SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.

  Event ID error msg:

  Log name: Application
  Source: Microsoft smart card CSP
  Date: 2010-06-29 22:25:22
  Event ID: 0
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Acer
  Description:
  The description for event ID 0 in source Microsoft smart card CSP is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.

  the message resource is present, but the message is not in the string/message table

  Title: event ID of origin 0

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      0
      2
      0
      0 x 80000000000000
     
      68716
      Application
      Acer
     
   
   
      SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.
  
   
  

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Vista Security Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configuration of VMware ESX 5.1/5.5 pass through for PowerEdge 2970

  Hello

  I tried to configure VMware ESX 5.1/5.5 pass through for a 8 GB Qlogic FC HBA on PowerEdge 2970 server.

  Even after activation of the virtual technology in the BIOS, the PCI device is not listed in "Advanced settings" to configure pass-through. Attached screenshot shows the current setting of the processor.

  Y at - it all the additional steps required to configure it.

  Concerning

  E.

  Hello Sara

  You're talking Direct path IO or single root i/o virtualization? If so, none of these features are supported on the 2970 system.

  http://www.VMware.com/resources/compatibility/search.php

  I don't think that or the other of these characteristics were available until our 11 generation systems.

  Thank you

• Card reader chip T61 not in Device Manager?

  Hi, I had a T61 7665 - 12G with a problem on the smart card reader. The Device Manager in windows 7 Enterprise, does not. And the only way to install the driver must already discovered HW.

  I am sure that this model has the smart card, because there is a slot in the side rail and smart cards in without problem.

  So what to do? Is there some kind of fix for this?

  with greetings

  JBJ

  The smart card reader is "enabled" in the BIOS under security - access to the Port of e/s?

• When I plugged in a new card reader, I lost all my saved for importing metadata presets. Now, when I type in a new and save it, it is not available. Help, please. Thank you, dwc

  Hi people,

  When I plugged a new card reader, Lexar Pro USB 3.0 Dual Slot player, I lost all my saved metadata that are used for imports.  Now, when I type in the metadata, it registers on the photos, but then it is not saved for later use, as it was before. I'm trying to save him, but it does not work. Any ideas? Is Lightroom 3, version 3.6.  10.8.5 Mac.  Thank you, dwc

  I think that's the problem. Go to the original catalog, uncheck it, close LR, open LR, and create the new catalog.

• How can I fix my SD card reader after upgrade to Windows 7 for HP Pavilion dv8000?

  I upgraded my HP Pavilion dv8000 with Windows 7, but my SD card reader does not work now. Advice?

  Hello:

  I think that your problem will be solved by this updated driver. It is not on your laptop support page.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=1847703&prodNameId=1847704&swEnvOID=2103&swLang=8&mode=2&taskId=135&swItem=ob-70996-1

  Paul

• How to pass through for support staff

  I can't go to the support team. All my attempts end with asking me to provide more information, and then redirected to useful pages that do not respond to my problem and then I find myself on a sort of loop by which it happens everywhere again. How actually to talk to someone?

  Hello

  Could you please share the query you have?

  Also, in order to get in touch with the help, please visit the link below:

  Contact the customer service

  Hope this helps!

• SD card reader is identified as a WPD file system Volume driver and can not read SD cards.

  HP Pavilion Elite-110f desktop PC

  Windows 7 64 bit

  In the Device Manager "this device cannot start."

  Temporarily used MiniTool Patition Wizard repartition my SD card out of my Android phone. When I noticed the problem, I uninstalled the program. Disk management Windows see the SD card; Ubuntu see the SD card; Yet he does not appear in 'computer '. So I can't transfer files.

  I reinstalled all the drivers card drivers mother AMD and Alcor USB 2.0. Question remains.

  Solved by assigning the drive letter in disk management

• Default password for LDAP sync accounts that do not use LDAP authentication

  We use CUCM 10.5.1.  We have enabled LDAP and installation directories.  I can see the previous local users and new users sync ldap.  I know that if there was a previous local user with the same user as the new ldap user ID, this account is converted into an ldap account and I guess the password stay the same before ldap integration.   But what of the new ldap sync protocol accounts?  I see that there is a field of password for them, but what is the default password for these newly created accounts and where I can edit this default password?

  I do not have a 10.x here, but on previous versions, "credentials political default" sets the default password.

  It was under the management/diploma default user policy. Choose the 'end user' political 'password' and put the default value you want here. It may be in a slightly different place from 10.x

  Aaron

• No drive letter for USB PCMCIA card reader

  I use a card reader Addonics AEPUDDU Digi - PCMCIA (USB for PC connection) drive with a desktop XP computer.  Now, when I plug in any card memory PCMCIA (I tried several), the card reader recognizes the insertion of the card (the Green led lights up), like the PC (the icon appears in the system tray), but it does not affect no matter what drive letter to the map, so I can't access it all (through Windows Explorer).  If I click on the icon to eject, I get the usual pop-up message ("Remove USB mass storage device"), still only refers to a drive letter.  Clicking on this message gives the 'Safe to Remove Hardware' popup normal.

  Moreover, this habit of work very well, and then several weeks ago began this strange behavior.  Some days it works OK, a few days would not work.  Sometimes restart would fix it.  Today, it doesn't seem to help.

  Why XP will not assign a drive letter to this device, and how do I fix?  Thanks for any help or suggestion...

  Moreover, this habit of work very well, and then several weeks ago began this strange behavior.  Some days it works OK, a few days would not work.  Sometimes restart would fix it.  Today, it doesn't seem to help.

  Assuming you are trying to read of the same type and media memory size that used to work and other USB devices plugged into the same USB taken work, it seems that the device failed.  That means Addonics offers technical support?

  I guess that you tried to connect the unit on different USB Sockets.

  Open the Device Manager (start > run > devmgmt.msc > OK).  I don't know where this device will be displayed.  Look in the hard drives and the Bus USB controllers.  Are there error icons?  If so, double-click the name of the device and see which appear under the heading "status of the device.

  If nothing is reported as bad, it is possible that uninstalling and reinstalling might help.
  Double-click the Device Manager entry and select uninstall.
  Then disconnect the device and reboot.
  Then plug in and let Windows recognize it and install it.

• SD card reader driver for Windows 7

  Laptop dv8025EA HP no. EK765EA product

  Just passed under operating system for above laptop XP to Windows 7. Windows 7 operating system is Dell Computers.

  One of the problemsI resulting, the SD card reader no longer works. The light blinks as normal, when I put the SD card into the slot of the card reader, but no AutoPlay dialog box appears.

  I think it may need a driver to operate the card reader. I searched HP website for a card reader driver Windows 7 but cannot find anything. As a result, I can't transfer the photo from my camera on laptop camera.

  A XP driver will do the job? or is there another solution? Thanks John.

  Hello:

  Use the Vista driver for the nc6400 business notebook and it should work.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_70996_1%257CswEnvOID%253D2103%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• necessary assistance for sample multithreading "card reader".

  Hello

  at the present time that my data acquisition program consists of several floating panels, one is the "main" Panel, and then there are other 'dashboards' that operate different instruments (by type of instrument panel).

  Now I have studied the "card reader" sample because I wanted to use my "dashboards" in individual threads. I have not succeeded only partially. I can start the discussions via CmtScheduleThreadPoolFunction and run each panel using its own RunUserInterface. And I can leave individual UIs by their respective button "quit".

  What I can't do (and the sample OR not do it either) is to automatically close all individual dashboards simply by closing the main table. In the example, the main panel can be closed, but the graphic Panel continues to operate. How it could be achieved in the sample that by closing the main table Board graphics, closed unexpectedly, too?

  Thank you very much!

  Wolfgang

  Inside of the multiblade sample button 'Exit function' contains a function to terminate a thread to the main thread, so you can mimic the behavior of the function to achieve your goal: secondary endpoint all sons teminating before your application.

  Take a look at the modified version of the card reader which I enclose you. I pressed the NotifyThreadFunctionExecState () function that is used in the example to fill the list of active threads: I added to it a meter thread active so that I don't know that all threads are actually end before leaving the main thread.

• Portege Z30 - smart card reader does not work

  Hi, I just got my new Portege Z30 a few days ago.
  I try to use the card reader chip for my Spanish ID (DNIe) and seems to not work.
  When I insert the card as stated in the users manual, nothing happens.
  I have to player of SC "actuvate" somehow?

  (DNIe needs a compatible with ISO7816 SC reader, as one installed in my laptop seems to be)

  Usually you should not activate anything. Check the status of card reader in Device Manager please. There is everything OK?

  Make sure that you use a compatible card and it is inserted correctly.

• Satellite A350 - 110 PSAL6E disappearing after every reboot Win7 card reader

  Well, the title says it all.

  As far as I know, that this model has a JMicron card reader - Windows Update installs its own drivers for it.
  I tried the drivers of * [HERE | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 819 selSho 789 = rtMod & language = 13 & selOS = 29 & selType = 316 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 316 & page = 1 & ID = 69749 & DISO = 29 & driverLanguage = 42] *.

  The thing is: I install the drivers and perform a restart. After that, the card reader works perfectly. However, if I do another reboot it disappears and I have to install and reboot again.

  Am I missing some other bits of software reviews? For anything else, I used the Toshiba Software Installer.

  Hello

  You have not missed anything guy card reader controller driver is the only driver that controls the card reader.

  I think that it of not a problem with the driver, but with the Windows operating system. I don't know if the update of Windows messed with something, but usually the update from Microsoft should not affect functionality of Mr. card reader that's why its odd to me that the driver does not work after restarting.

  However, maybe you must first uninstall the card reader driver. This in Device Manager.
  Mark the card reader and uninstall the driver. Reboot the laptop.
  Then clean the operating system using CCleaner (freeware tool can be downloaded from different pages).

  After the cleaning, restart the device and install the driver through the Device Manager. Reboot and test functionality.

  Good luck

• Media card reader problem

  The green light on my media player is constantly on, because he thinks that there is a card in there. It is causing all sorts of problems with my PC. I did search back issues with media card on the forum readers to find a solution. The closest solution to you, that I could find is below.

  http://h30434.www3.HP.com/PSG/board/message?board.ID=HardwareDPC&message.ID=5888&query.ID=211647#M58...

  I tried to put the card in and out with no luck. I restarted the PC with no luck. I tried to disable and re activate each in Device Manager. The solution to the issue I found suggested that uninstall all the different reading devices and restart. Someone at - it any other suggestions on how I should approach this issue? Any help would be greatly appreciated.

  Thank you

  jahmekyat

  Hello

  Thank you for your response. Sorry for the lack of information in my post. In fact, I have corrected the issue last night. What I did get another sd card and insert that into the card reader. Then, I went through Explorer and clicked on, safely remove and it worked. I think that the problem could be with the previous card is not removed correctly, or that the other card was causing problems for some reason any.

  Thanks again for your help,

  Bryan T