Apple TV remote app gen4 records do not in other devices

Similar Questions

• Apple TV Remote App - Volume control

  I have an Apple TV 4th Gen - the remote Siri works perfectly.  I just download the new (01/08/16) Apple TV Remote App on my iPhone 5s.  The app works well except the TV volume can be controlled with the volume of the iPhone + and - buttons.  Our version tvOS is 9.2.2 CEC is activated and the Apple TV is a device of overdraft on my Vizio TV.

  Some report to community members that the iPhone volume buttons work with the TV Remote application again Apple and others have the same problem I have.

  Help.

  Thank you

  Ciids remote uses IR to adjust the volume on your TV/receiver in the vast majority of cases and HDMI-CEC in a small number of cases because / TVs very few seem to support the volume in this way. If you cannot use your siri remote to control the volume via HDMI-CEC then you aren't going to get the remote app either from the app remote can't use IR

• I cannot pair the new Apple TV Remote app with my first generation Apple TV.

  I cannot pair the new Apple TV Remote app with my first generation Apple TV. Someone knows what to do?

  You can use the old, now called iTunes Remote? A new one seems really targeted to ATV 4.

• What happens if I want to just pictures of my phone stored in icloud, but not my other devices?

  What happens if I want to just pictures of my phone stored in icloud, but not my other devices?

  Hello Lisa,.

  You can get more help if you posted in the forum to iCloud.

• Apple TV Remote app using when the personal hotspot

  Due to bandwidth limitations, I am better off using Apple TV via a personal hotspot on my iPad (ATT now plan has unlimited data available).  However, once the TV is connected to the personal hotspot, and Apple TV works very well using the included Apple Remote, if I try to activate the Remote app on the iPad it says unable to connect to a Local network.  You must connect to a WiFi network to control iTunes or Apple TV.  If the iPad app is looking for WiFi while the iPad is broadcasting a Personal Hotspot via WiFi to the Apple TV.

  Is it possible to fix this?  In addition, I sure with Apple TV 4 (latest version) would recognize my Apple's Bluetooth keyboard!

  You have to be on wifi, no way around that. Bluetooth keyboards are not supported at this time. Also, best to check with ATT on the terms of the plan (more connection after certain Butterfly amplifiers and do not permit this type of use).

• Apple TV Remote App

  Apple TV4 (tvOS 10.0)

  After the upgrade to iOS 10, Apple TV remote see app will chop her when the Apple TV4 in mode 'sleep'. After restarting the Apple TV4, I can plug it in again. But the problem come on Apple TV4 and smoothly on Apple TV3.

  Try to remove the Apple TV 4 in the list of devices, and then set up again.

  TT2

• Apple tv remote app for my ipad 2 can't wake up Apple TV

  My remote with Apple TV 4th generation bought a few months ago emissions very quickly. So I installed the remote app on my ipad 2. Works fine, but only after I turn on the Apple TV with the remote control. Once the Apple TV went sleep there is no way that I can start it from the ipad, because the Apple TV icon is grayed out. Any ideas? The ipad is all updated to the latest version as well as the Apple TV.

  Hello. If your remote Siri does very quickly, it may be damaged. You should be able to return the entire system for refund or Exchange. The remote control battery is expected to last for months.

• Apple TV Remote App for iPhone

  Y at - it an iPhone application that provides all the features of the Apple TV remote? including Siri.

  N ° of yet...

• I just bought a new Airport Express Terminal. It connects to my laptop, but not my other devices such as iphone/ipad. Any suggestions?

  I just bought a new Airport Express Terminal. It connects to my laptop and I have working internet, but my iphone/ipad do not work with it. They say they are "connected" to the wireless network but nothing works / charges on other devices. I tried to forget the network, by renewing the lease, etc and nothing works. Any suggestions as to why my laptop works but not other devices?

  What is the serial number and model of the modem you use?... or... The AirPort Express connects directly to the Ethernet wall port?

• Update App Tabs recording is not in 6.0.1

  I had a problem with App Tabs before, but having Firefox not delete browsing history after closing that resolved pretty quickly.

  This morning when Firefox updated itself, I had lost my tabs App that does not seem like that big of a deal that they tend to disappear from time to time, but usually to re - open the browser, their establishment again suits him. Now, when I add App Tabs, close Firefox and restart Firefox, they went.

  I have not modified settings in Firefox before or after the update for it to act in this way.

  (PIN) App tabs and groups of tabs (Panorama) are stored in session data [1] in the sessionstore.js file [2] in the Firefox profile folder [3].

  Make sure that you do not use "Clear recent history" to clear the 'browsing history' when Firefox is closed because who wins and prevent Firefox tabs from the previous session.

  • https://support.Mozilla.com/kb/clear+recent+history
  • [1] http://kb.mozillazine.org/Session_Restore
  • [2] http://kb.mozillazine.org/sessionstore.js
  • [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox

  It is also possible to use the "Show my windows and tabs from last time" parameter, which is generally a more reliable way to restore the session data.

  • Firefox/tools > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

• Image recording is not real but device works perfectly on emulator

  Hi guys, I use the JDE 4.6.1. I would like to keep an image uploaded to the file system and retrieve it later. Something like a caching option. Everything works perfectly on the Simulator, but when I install it on the device, it does not work. Here's the code,

  private StringBuffer Imagedirectory = new StringBuffer(System.getProperty("fileconn.dir.photos"));
  
  FileConnection fc = (FileConnection)Connector.open(Imagedirectory.toString(),Connector.READ_WRITE);
  
                  if(!fc.exists()){
                      Util.getWebData(url, this);
                  }else{            
  
                      byte[] data = getData(fc);
  
                      bitmap = EncodedImage.createEncodedImage(data, 0,
                              data.length);
  
                      if(this.width !=0 && this.height !=0){
                          bitmap = ScaleImageToSize(bitmap, this.width,this.height);
                      }
                      setImage(bitmap);
   }
  

  This is where I get the data of the file

  private byte[] getData(FileConnection file)
      {
          byte[] data = new byte[0];
          try
          {
               InputStream input = file.openInputStream();
                            //////////
               int SIZE = 100000;
               ByteArrayOutputStream byteArrayOutputStream = new
                                  ByteArrayOutputStream();
               byte[] buffer = new byte[SIZE];
               while (true)
               {
                 int bytesRead = input.read( buffer, 0, SIZE );
                 if (bytesRead == -1) break;
                 byteArrayOutputStream.write( buffer, 0, bytesRead );
               }
               data = byteArrayOutputStream.toByteArray();
               byteArrayOutputStream.flush();
               byteArrayOutputStream.close();
  
          }
          catch(Exception e)
          {
              System.out.println(e.toString());
          }
          return data;
  
      }
  

  This is where I write the image to a file,

  private void writeFile(byte[] data, String fileName)
      {
          FileConnection fconn = null;
          try {
              fconn = (FileConnection) Connector.open(fileName,
                      Connector.READ_WRITE);
          } catch (IOException e) {
              System.out.print("Error opening file");
          }
  
          if (fconn.exists())
              try {
                  fconn.delete();
              } catch (IOException e) {
                  System.out.print("Error deleting file");
              }
              try {
                  fconn.create();
              } catch (IOException e) {
                  System.out.print("Error creating file");
              }
              OutputStream out = null;
  
              try {
                  out = fconn.openOutputStream();
              } catch (IOException e) {
                  System.out.print("Error opening output stream");
              }
  
              try {
                  out.write(data);
                  out.flush();
              } catch (IOException e) {
                  System.out.print("Error writing to output stream");
              }
  
              try {
                  fconn.close();
              } catch (IOException e) {
                  System.out.print("Error closing file");
              }
      }
  

  Help, please.

  Thanks much for the reply.

  I found the problem, the byte array which I was the analysis was not proper, so I created the image first and after that used the information bytes of that to save the image. Here is the solution.

   public void callback(final String data)
      {
          if (data.startsWith("Exception")) return;  
  
          try
          { 
  
              byte[] dataArray = data.getBytes();
              bitmap = EncodedImage.createEncodedImage(dataArray, 0,
                      dataArray.length);
  
              if(this.width !=0 && this.height !=0){
                  bitmap = ScaleImageToSize(bitmap, this.width,this.height);
              }
              setImage(bitmap);           
  
              if(isWriteImage()){
  
                  System.out.println("Before writing the image");
                  writeFile(bitmap.getData(), Imagedirectory.toString());
                  System.out.println(Imagedirectory);
                  System.out.println("Image written - Operation Successful");
              }
  
          }
          catch (final Exception e){
              System.out.println("Image Creation Failed");
          }
      }
  

  The problem was because I was the array of bytes of the string of variable data analysis. No idea why this caused a problem?

• Why would a test on an iPad not shared other devices on the network?

  We have a 2 Air iPad and iPad Mini 2, a 2010 MacBook Pro and iMac 2009 beginning to share Safari, mail, contacts and calendars via iCloud. The iMac running OS 10.8.5 and MacBook OS 10.10, two iPads IOS 9.3.1 when an event is entered on any of them except the Air iPad, they appear in the other calendars. A test in all others appears in all four calendars. The timing of the Air iPad seems to be implemented as close I can say in the way that the iPad Mini is set up. How can I convince the tests listed in the Air iPad to show in other calendars?

  On the iPad

  Remove iCloud email/calendar

  Sign up for iPhone

  Disconnect from the iCloud

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  Reconnect

  Re add iCloud email

  See if the synchronization of calendar with iCloud

• Overview of the signatures don't cross don't not to other devices

  I created 3 signatures for the preview using the iSight camera on my PowerBook El Capitan running. I hope that the signatures are available to me on my PowerMac, El Capitan, also running, but they are not. The two devices are listed in my iCloud account. I have reproduced the elements of password for the keychain of the laptop for the big boy, but I always get the message in the preview that I need an iSight camera or the Trackpad to create signatures.

  Solved. Had to enable security on PowerMac 2-step process.

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Computer laptop Wifi Hostspot does not not to other devices

  Laptop MODEL: HP Pavilion DV6

  OS: Windows 8 (even if default OS is Windows 7)

  WiFi adapt: adapter WiFi b/g/n Ralink RT5390

  Hello

  I use software such as Connectify and MyPublicWifi for some time now in the hotspots, but all of a sudden since yesterday I am not able to connect to the hotspot of my Windows Phone 8.1 device. I tried to connect an Android phone that does not work either. I kept receiving a notification saying "network Wifi did not. Try again later. It seems that its a few problems of the laptop and not devices trying to connect to it.

  I tried to restart the laptop several times to uninstall and reinstall software hotspot and even created a gateway using CMD. Even after all this, I get the same message network does not. I checked the network for any material change cards, drivers revealed that they were working properly.

  Kindly help me out here.  I'm trying to share the internet of Realtek PCIe GBE Family Controller.

  Kind regards

  Serge pacome

  Check if there's recent updates to windows that has happened since the last time you were able to use the hotspot software.

  You can consider using Windows to choose System Restore and restore the operating system of your laptop to a date before the problem started. It is a reversible process, so you will not lose data.

  You should also take a look at your firewall settings to make sure that the firewall is to allow incoming and outgoing connections occur.

  Guide to restoring the system Windows 8