Satellite A660 - blurry fonts after upgrade IE9

Similar Questions

• Re: Satellite A660 - no boot after upgrading RAM

  I just picked up 8 GB of RAM for my Satellite A660, CM3X4GSD1066 Corsair 4 GB PC-8500 (1066 MHz) 204 - pin DDR3 SO-DIMM RAM CL7.

  The system publishes end and the 8 GB appears in the BIOS, but once that his erases post and passes to Windows loading it stops on the black screen, the cursor blinks several times then it stops. I left for about 5 minutes and it starts through.
  Help, please.

  I replaced the 4 GB sticks and it works fine.

  Hello

  To me it sounds like it's modules are not compatible or have bad sectors
  As Akuma writes, these performance modules are risky in notebook because you don t have options to change the values of latency than on desktop computers. So, I always prefer to upgrade computer laptop RAM Kingston modules.

  But before that you buy other modules, try a BIOS update and load the default settings.

• Satellite P50T-A-115 after upgrade Win8.1 does not play sound on HDMI

  A newly acquired by Satellite P50T-A-115, I upgraded to win 8.1, all suggested upodates and drivers are installed.

  I have no sound on my home theater system, playing from my laptop, while the video is good.
  The sound is the internal speaker of the laptop.

  There is no other choice than to my internal speakers in the control panel.
  I have seen similar questions to other laptops, but have found no useful suggestions.

  Did anyone get this working on a P50T-A-115?

  Please check this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74149

  There was a similar discussion and the problem could be solved by the installation and update of drivers in the correct order and uninstall the Intel WiDi as suggested by Toshiba.

  Your comments would be appreciated.

• Satellite L300-215 - BSOD after upgrade to Windows 7

  Just upgraded 32 bit Vista to Windows 7 32 bit but keep getting BSOD (Blue Screen Of Death) when using the laptop. The events of the problem like log file below and it fails every time is same error code except BCP2 can change different Hex value.

  Have Toshiba upgrade disks used and all uninstalled programs that he asked me to do it before installing Windows. Model is L300-215 and laptop worked OK before upgrading to Windows 7. Have you tried the drivers audio and graphics of the site Web of Toshiba (old version of what was on the laptop after upgrade), but always the same question :-(

  Any help would be appreciated if someone else seen this error before?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 4th
  BCP1: 00000007
  BCP2: 000B458A
  BCP3: 00000001
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Hello

  When you get exactly this BSOD? Happens immediately or if you start a certain application?

  Have you checked for yellow exclamation marks Device Manager? Maybe a driver isn t working properly and you should update it.

  Also make sure that your BIOS is up to date. You can download the latest version on the Toshiba site.

  Last but not least blue screen often associated drivers or memory modules defective RAM. The latter you can check using Memtest86.

• Problems with fonts after upgrade to Windows 10

  After the upgrade to Windows 10. Some of the police are white with black outlines makes it difficult to read a few pages. I refreshed and reinstalled firefox and it's still there. I disabled and deleted all the addons and it's always the case.

  Both pis. My only solution is to delete the font cache. Restart the PC and uncheck the allow the Web Sites to choose their own and simply used the Arial font. I can read very well now. For some reason any double check the last option is by default the text to look like that. Does not occur in Google Chorme then Yes.

• Satellite M115 - no sound after upgrading Windows XP to Windows 7

  Hi all

  Recently upgraded my Satellite of Windows XP to Windows 7 Enterprise 32-bit. After installation, the high definition Audio Device appears in Device Manager.

  Initially, I had an unknown device listed, but that has been resolved by the installation of the pilot site supervisor password utility from Toshiba. Since then, I have experimented with a number of audio drivers without result. Does anyone have advice?

  I downloaded the Conextant 4.8.0.0 pilots, who are not out during installation by saying "Driver Installation Failed: could not find the device for this driver." So now, I'm sitting here without any noise. It's sad. Please help and I'll give you points.

  -Red

  Hello

  Remove all audio drivers, you have already installed, reboot the laptop and download an audio driver for the Toshiba driver page

  For European models, take a look here:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  For Canadians or something like this:

  http://www.CSD.Toshiba.com/

  For the Australian and New Zealand:

  http://www.Toshiba.com.au/

• Big problems with fonts after upgrade to Yosemite

  Hello

  I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

  In general, these are the main symptoms of the problem with screenshots:

  1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

  

  2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

  

  3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

  

  Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

  < image edited by host to remove the serial number >

  You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

  (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

  2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

  3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

  (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

  sudo atsutil databases - remove

  Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

  This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

  Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

• C850-A797 - Bluetooth driver satellite does not work after upgrade to win 10

  My laptop Satellite C850-A797 upgraded to windows 10 last week and Bluetooth driver not working since upgrade,

  I installed the battery Bluetooth for windows ver.9 but it also does not work.

  can someone help me with this please?

  C850 satellite is not listed as a book of 10 Windows compatible.
  This means that Win 10 drivers are not available for this unit.

  In any case, I recommend you to go to Device Manager and remove / remove Bluetooth all the partners of the devices and entries.
  In the view of mark tab also the option Show hidden devices in order to get the big picture complete.

  Now after reboot, win 10 must search for removed devices and drivers missing.

  I hope this could solve your problem of BT.

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• Activation questions Win 8.1 on Satellite Pro C850-1EQ after upgrade

  Hello everyone!

  I face a problem after the upgrade of my TOSHIBA SATELLITE PRO C850-1EQ preinstalled version of windows 8 to 8.1.

  After installation windows ask the product key to activate windows 8.1, but I don't have this activation key.

  I called Microsoft (Greece), but could not help me and told me to call Toshiba (Greece).
  The man of Toshiba technical support told me to remind Microsoft!

  In addition, he told me to check here (https://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/) before starting the process. Step # 7 says "don't forget your Windows password. You may need to enter after update. »

  Now, I'm back to Win 8.

  Is there a way to learn my activation key before installation of w8.1?
  I tried to find that the use of various tools, but nobody found the key.
  In addition, after 8.1 install, a message says:

  + Error code: 0xC004C003 +.
  + The activation server determined the specified product key has been blocked.

  I trust Toshiba and I want to use the latest version of w8.1.
  I'd be grateful if someone Toshiba technician could help me with this problem.

  John (from Greece)

  Hello

  > I'd be grateful if someone technician Toshiba could help me with this problem.
  It's community of users

  > Is it possible to learn my activation key before installation of w8.1?

  No, the preinstalled Windows 8 Toshiba is already activated and during the upgrade to 8.1 Win will not ask you to enter the serial key...

  Windows 8 is activated?

  Try this: create DVDs of Toshiba Recovery (or flash USB memory stick). Use the recovery media to recover the computer laptop back to factory settings. Update of the Windows 8 at the last State and then do the upgrade to 8.1 Win

• Satellite A660 - slow start after installing Win7

  I have an A660. Satellite (model aus)

  I installed the 64 bit version of windows 7 and starting to take more than a minute. I was wonderign if I used a retail drive and used the serial number at the back of the computer laptop would it not be a better facility.
  Then, I would install just the stuff I need.

  Also, so I use a commercial version would drive recovery based HARD stop working? (because the commercial version may overweite some entries written in the section the drive boot HARD-now if I press 0 he goes to setup - if rerail version replaces this function would stop working?)

  Thanks heaps.

  Each Toshiba laptop comes with the Toshiba recovery image. This recovery image contains several specific Toshiba and utility tools that begin with OS and also some additional software.

  What you need now is the right configuration. With other words, you can remove the unnecessary software from the system and stop all applications, you need the startup list t.
  How to do this?
  Press WIN + R > write msconfig and confirm with OK. The system configuration will be open. Go to the Startup tab and clear the check box in front of app you n t need initially to the top.

  Of course, you can install a clean version of the OS, but for product activation, you can use the product key from the sticker. This license is for the version of Windows that you have with your laptop.
  HDD recovery works with the factory only settings. When you install the clean operating system, you will not be able to start. What you need to do is to create recovery DVDs after Toshiba s instruction how to do this.

  If you have any other questions please let us know.

• Satellite P755: Hardware buttons after upgrading Win10

  Hello

  I did an upgrade of my P755-PSAY3E for Windows 10 today and has clean - install later. After that, I installed this Toshiba in relation to the Toshiba Windows 8 Upgrade Assistant tool. Win10 is now running well so far, but I have problems to get the hardware buttons between the keyboard and screen work (eco-utility, WiFi, Volume) backlight. The Fn keys work correctly.

  Can someone tell me please which driver package (s) is responsible for these buttons? Wouldn't be value added package? VAP is installed, can't find anything that helps. Good idea to try Windows 7 drivers?

  Thanks and best wishes,
  Alex

  Hi Alex...

  I managed to have some buttons work on my P855, installation of Flash Cards support utility for win 8.1 (64):

  There are several versions (win 7, win 8.1, etc.).

  Some buttons are mixed upward, but still better than nothing.

• Satellite U940 really slow after upgrade to Windows 10

  Hello

  Just upgraded the Windows 8.1. Windows 10 installation on my laptop U940-100 with 32 GB SSD for implementing caching.
  The laptop really performed very well (fast start etc.) until this upgrade.
  It seems that on the SSD caching does more.
  Anyone familiar with this problem? I can't find any useful information on the Toshiba site.

  Thanks in advance!

  Hello

  I had the same problem of yours on my 940-11 K,

  I solved it very easily just by installing the drivers for fast boot Intel and Intel Rapid Storage Technology drivers.

  You can download the latest version from the Intel site, here is the link:

  https://Downloadcenter.Intel.com/Dow...art-technology
  https://Downloadcenter.Intel.com/it/...-rapid-storage

  I have upgraded to Windows 10, then I installed the drivers.
  After each driver installation, I did a reboot.
  SSD caching should automatically work again after these 2 steps.

  You should see an improvement in performance just after.

  I hope this will help you!

• Satellite L730 - Bluetooth problem after upgrade to Windows 10

  Hello. I use a portable Satellite L730 and the only thing that would prevent me from upgrading to Windows 10 is the problem of Bluetooth. RFHID, RFCOMM and RFBUS will not work properly because there are no drivers. Apart from that, the computer there is no requirement of meeting problem Windows 10.

  So is it possible that a sollution to this problem will be provided anytime soon?

  Hello

  In most cases, BT does not work due to lack of BT software.
  The point is that most laptops use a module for WLan and BT.
  This combo module WLan/BT requires additional driver filter...

  According to your WLan / module BT, you will need to install the filter for the BT driver package.
  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

  But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek

• Satellite A660 - 11 M - Memory Upgrade - problem

  Hello world!

  I'm having a problem with upgrading my RAm 4 GB to 8 GB memory ([link crucial 8 GB Kit | http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=28543EEAA5CA7304]) which should be compatible.

  When I turn on the laptop after mounting of the modules to all first all seem to be right and the Bios start, but then it will not load windows and stucks on a black screen.

  Could someone help?

  Thank you!

  Hello

  What to say: it looks like it s a problem with new RAM modules.
  The RAM modules aren t fully compatible or they malfunction.
  You must use other modules I made good experiences with modules from Kingston.