Apple Watch stuck

my watch is stuck on the screen clear all.  Any ideas to make it take off?

Hello

Try to restart or if it does not help, force the reboot - your watch:

-Restart: Press and hold the side button until you see the cursor off the power; slide it to turn off; Hold down the side button until you see the logo.

-Force the reboot: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

Tags: Apple Watch

Similar Questions

  • Watch OS 2.1 failure update - Apple Watch stuck in recovery mode

    Todat I upgraded my Apple Watch from my iPhone 6 Plus (running iOS 9.2) to watch OS 2.1.

    Somehow, the software was discontinued due to a fallout in wifi. This caused the Apple Watch running in a mode where I see a big "!" followed text "www.apple.com/help/watch".

    On the hyperkink above, I tried the fix ' hold the Crown + home to restart button ", but nothing works. Then, I contacted Apple customer service by phone such as recommended. They told me that I have to send the Apple Watch in to Apple to fix the problem, as the watch is stuck in a mode called 'Recovery Mode' which can fix only Apple product support. I'm in the hold of how this can happen! Apple you cannot be serious about this! In addition, they said they were not sure if I had to pay for the repair, even if the watch is 6 months.

    I demand a serious response from Apple on this issue as soon as poosible as is below you standards!

    Kind regards

    Poul

    Hello

    It is a community of support based on the user - Apple does not formally provide technical support here.

    You have followed the correct steps to solve the problem that has arisen.

    I'm afraid that no one here can tell you what that Apple will decide (and it is not allowed here to speculate).

    Your best solution is to continue to submit your watch for the service by Apple.

  • Apple Watch stuck on the load screen

    My watch was almost dead when I put it on the charger, I checked on this shortly after and now it just displays the red indicator (red Flash) and next to the load time. Completely insensitive to everything I do and yes I tried a hard rese, the problem persists. Try to empty the battery and recharge. This to see if anyone else has had this problem and if there is no solutio announcement, thank you.

    Hello

    Your watch is entered mode of power reserve. This happens automatically when the battery reaches a low battery level.

    What you can do for now is to tell the time (by pressing once the button). This is designed to keep this function available as long as possible, until you can recharge the watch again.

    To turn back on your watch: press and hold the side button until you see the Apple logo and wait for your watch to restart.

    However, you need to charge your watch for a little longer first. Try to recharge for at least 2.5 hours, following the instructions here:

    More information:

    With the help of power reserve - Apple Support

  • Apple Watch stuck emojis

    Hello all, I just noticed that my Apple Watch (stainless steel 42mm). Drag to the right or left when I'm in the message section I don't know what the problem? can someone enlighten me please? ! I have reset a few times and I have firmware (2.2) updated to the latest software I also did a hard restart or refresh I don't know what they call it now he slips sometimes but only for the first smiley and the emoji in heart but not the third and fourth options emoji. any help out there, it would be appreciated > > > > > > > > > > > > > > > > > > > > >

    I think that there are only two types of emoji. Not more, only the heart and smiley emoji.

  • Apple Watch series 2 battery level stuck at 100%

    My new Apple Watch series 2 battery level indicator is stuck at 100%, regardless of the current battery level. I tried to restart the watch and it did not help. Anyone else know this and know a fix?

    Hello

    As you've already restarted your watch, it can help to disable the pairing and re-pair the headset:

  • Help! My Apple Watch is stuck on the screen of weekly activity

    Hello

    My Apple Watch is stuck on the screen of the weekly activity. I tried setting down, I tried the button dial spinning and nothing. There is no done either button. Do I let my Apple Watch lose all batteries, or is there a way to solve this problem!

    Hello

    There should be a link to the upper left corner of the screen.

    Even if you don't see (after verifying that you have reached the top of the summary page), try to tap into this area to exit Preview.

  • My iPhone is stuck looking for a Apple Watch update.

    A new update system is available for Apple Watch. I took the necessary steps to get that update via the Apple Watch app on my iPhone, but the phone is locked on "search for updates". This continued after the restart of the iPhone.

    Hello

    The following steps may help:

    • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).

  • Apple Watch does not stuck in mode bedside table

    MY watch is in bedside mode. I plugged in the charger, but there is no change in the watch.

    Hello

    Try a reboot of the Force...

    Force restart your Apple Watch

    You should force reboot your device as a last resort, and only if it does not. To force the restart your Apple Watch, press in and hold the side button and the digital Crown for at least 10 seconds, and then release both buttons when you see the Apple logo.

  • Apple Watch Installer 'failure '.

    My Apple Watch unplugged my iphone 6s for unknown reason.  After several attempts of plugging it back in, I decided to reset the watch and not matched it.  The implementation is stuck in the "audit Apple ID", then after almost an hour, that a message is displayed that the establishment has failed and I have to restart the process again.  I did it about 3 times.

    What have I done wrong?  can anyone help?

    Hello

    My Apple Watch unplugged my iphone 6s for unknown reason.

    See if there is a software update available for your iPhone.

    Tap Settings > general > software update

    After that you made sure that the software is up to date, follow the instructions here > If your Apple Watch is not connected to your iPhone - Apple Support

  • Haptic on Apple Watch not working

    Hi all.  So I have a problem with my Apple Watch which becomes quite frustrating.  The haptic feedback doesn't always work.  When I get text messages, it does not vibrate all the time.  The sound works 100% on the watch, but isn't the haptic feedback.  When I say, "does not vibrate all the time", I mean that I have to constantly manipulate the haptic feedback adjustment in the settings or forcefully bump/tap the day before for the haptic feedback work (as the engine does vibrates is stuck).  I'm pretty smart Apple then Yes, I adjusted the settings, unpaired, cleared, reset and also had it sent to Apple for repair.  Unfortunately, Apple technicians have not replicate my problem which is most frustrating.  On the Apple Store, the representative has not even tried to solve my problem and just told me that he would send my watch to get looked at.  Does anyone else have this problem?  I've just updated IOS to 9.3.4 on my iPhone 6 s more and that did not help either.

    Hello

    I suggest that you stick with Apple Support.

    Given the steps that you have already tried, the symptoms are indicative of a problem with your watch.

  • Digital State on my Apple Watch Sport difficult to turn or do not meet pressing

    It started last month: my Apple Watch did not meet the tapping of the Crown and the Crown was hard to turn.

    Looking at the Crown, there was no trace of dust or dirt or parts that comes out. However, I tried the fix described here: get help with digital on your Apple Watch - Crown Apple Support

    But rinse the watch does no change.

    Because I did a tour and were far from all cities with the Apple stores I couldn't have the watch checked.

    As if by magic, the problem itself after that I came home to a temperate climate.

    Now, I suspect the problem with the digital Crown stuck may be partially related to the use of the watch under a tropical climate.  During my vacation during the day, the temperature was often above 35 ° C and the humidity is very high.

    This document does not mention the digital Crown: Keep Apple Watch in temperatures acceptable - operation Apple Support

    < published by host >

    I see that I need to rephrase my question: is there a problem with the port of the watch under a tropical climate? The temperature was not much higher than 35 ° C, but the differences in temperature between the outside temperature and the air conditioned rooms was great.

  • Alerts personalized calendar app Apple Watch switches to

    For some reason any starting today, I just noticed that I can not switch on customized on my Apple Watch calendar alerts.  When I set it to 'Custom' instead of 'Mirror my iPhone', the button "View alerts" is green, but all the other calendar settings are turned to "Off" and when I go to turn it on, it's like the button to toggle them is stuck and won't turn on. Someone knows how to fix this?

    Hi Frank

    You find that it is due to rules imposed by a profile that has been installed on your iPhone (configuration profile is to say business, mobile device management, or exchange rate policy). If your iPhone is managed in this way, contact your administrator of device information and help.

    However, the custom options are most useful when you want to receive notifications on your watch unlike how the calendar offers them on your iPhone.

    It can help to choose my iPhone mirror. Depending on the configuration of your iPhone, your watch can then provide calendar with audio and vibration alerts (even if the vibration is not included in your iPhone for the calendar notification settings).

    Also check your settings of the iPhone for each type of notification of calendar:

    -On your iPhone, go to: settings > Notifications > calendar.

    -Enable all options for each type of alert, including the choice of a sound (although this will not change the type of sounds on Apple Watch).

  • I can't remove Flight mode of Apple Watch, need help!

    When I turn airplane mode on my iphone 6 does the same thing on Apple Watch (which is ok), but when I disable the airplane on the Iphone mode, Apple Watch keeps saying it is only locked due is on airplane mode, in other words, after you apply the change on the Iphone, Apple Watch does not change.

    I have to disable the Apple Watch and then be able to turn on normally, it works the first time, but I ran into a few cases I need to reboot twice. I'm sure it's a matter of buggy that apple will correct.

    In the meantime, I tried to set up a password (4 digits), however, I don't option on the Iphone app shows like turn off, when I try to drag him 'unlock iPhone' it won't work, also when I tried to drag on the "Simple Code" function it looks like fade. So I'm stuck right now.

    Can someone help me how to solve this problem? is this a bug or a faulty Apple Watch?

    Hi, Carlos

    What you have described is the correct behavior. It is possible to activate airplane Mode to be mirrored between the devices, but the same does not apply to disable the mode, which must be done separately on each.

    To change the setting for mirroring of the turn on airplane mode:

    -On your iPhone, in the application of Eve, go to: Watch My > General > airplane Mode - enable or disable the iPhone, to choose mirror.

    When the watch is in Airplane Mode, Bluetooth and Wi - Fi turned off, so there is no way for it to receive additional instructions from your iPhone (including a statement to exit the airplane Mode when the mode on your iPhone).

    To turn off the airplane on your watch Mode:

    -When you view the time on your watch, drag to the top of the lower edge of the watch face > drag left/right to the gaze of settings > press airplane Mode to turn off the mode > slide down on the screen to exit the looks.

  • Apple Watch activity is not in the cloud?

    So, I've been using a Apple Watch for a while and my number one problem is that 'Activity', I put together for the last year is not sync with the iCloud, so when I upgraded my iPhone 6 to iOS10 all my activity watch is gone. I tested this point last week and it seems that "Activity" app does not synchronize your data in the cloud, so if you lose your phone or your watch you will have to start all over again and latest data are lost. This seems to be a huge concern when I spend all this time my overall follow-up and progress. Everyone see what happens if you put to level or restart/reset your watch or your phone?

    Hello

    Health and historical activity data is stored on your iPhone. It is not recorded separately in iCloud.

    To guard against data loss, be sure to make regular backups of your iPhone.

    If the backup via iTunes, make sure to select the option to encrypt iPhone backup (unencrypted backup excludes the sensitive data, including health and activity). iCloud backups are encrypted as standard.

    More information:

    The backup of your iPhone, iPad and iPod touch - Apple Support

  • Cannot delete playlist Apple Watch

    I want to delete my playlist of Apple Watch, so I can synchronize another list.  Select None for music synchronized and then place the watch on the charger does not remove the playlist.  What can I do to get rid of the playlist?

    Hello

    To change tracks in sync, follow the normal procedure for synchronization of a reading list, but this time choose the playlist you want to add:

    Listen to music on your Apple Watch - Apple Support

Maybe you are looking for