Clip + died & raised...

Similar Questions

• 2nd clip died after load

  Okay, it's me or the clip. I loaded my clip and when I went to turn it on it says goodbye and now I can't get anything to work or lights.  It's the 2nd one I had happen.  What can I do to recover my clip. I love the clip but if I can't do it to come to life I'll be forced to return a 2nd and I'll buy another brand.

  Have you tried to reset (on switch held higher than 15-20 seconds)?

  Also, maybe the battery is dead on you?  Try to leave plugged in all night?

• Sansa Clip + does not start or is not recognized by my computer.

  I listened for the Sansa Clip + to work for about two hours after charging the battery. It stops all of a sudden. It will not turn on, nor is it recognized by my computer. I tried a soft reset by holding the power button and I still get nothing. I tried to connect to different computers and different USB ports on each computer. I can also load with another cord which is not read.

  Any help would be appreciated, thanks

  Have you tried holding down the power button (some say 30 seconds, but I don't think he'd be as long) and then releasing and clicking it normally? This is what worked for me both times as my Clip + died spontaneously.

• Rocket pre-sale question

  My Sansa Clip died last Friday, and I am wrong because I listen to podcasts during travel or any other 'time' I.

  The things that I really liked in this regard were:

  -Deleting a file on the drive

  -Fast forward or rewind has become progressively more quickly you hold the button

  -Record Podcasts

  The "rocket" do all this?

  In addition, what has been the general consensus on the "rocket"? Is - more/less/same buggy as the Clip?

  I bought a Philips 2 GB today at Wal-Mart, but let me tell you: do NOT. Not a bad player self, but he did not three points above that I got so used to it. It is already in the box must be returned to Wally World.

  Thanks for your time.

  I'm not going to tell you not to buy a rocket he has what you're asking. But this is a thread on the forum to Clip the clip of 8 GB is on sale at Wal-mart for $49. I would just get another clip.

• Wie kann ich in first Pro CC die von meinem Mosaik auf andere Clips übertragen position?

  Hallo,

  ICH habe ein video was aus vielen includes Clips. Nun möchte ich aber einen looking range of videos unkenntlich uber den ein Mosaik lege ich machen. ICH habe're bei einem Clip kind positioniert wie ich are haben möchte und dann habe ich den Clip kopiert und bei den other da attribute einfügen gemacht man ja so effects mit gleichen parameters übertragen kann. Aber die Position meiner Mosaiks wurde nicht ubernommen. Wie kann ich are machen, dass auch ubernommen wird sharp?

  Viele Grüße Max

  PS: Use latest Version von first Pro CC 2015 die Ich

  Hello

  I have a video of which consists of many clips. Now, I want to do but disfigured a specific area of the videos I put on a mosaic. So I positioned it to a clip that I wish I had it and then I copied clip and paste the other attributes have made since these effects with the same parameters can be transferred. But the position of my mosaic was not adopted. How can I make also spikes upward?

  Regards Max

  PS: I use the last version of the first Pro CC 2015

  Microsoft® translator translator

  Hmmm, I don't see this behavior. Can you show us in a registration form?

  Thank you
  Kevin

• PremierePro: Ich Kann die Spurlautstarke auf einzelne Clips übertragen?

  Hallo liebe community,

  Now im am mit PremierePro Cs6 und habe folgendes problem:

  Dem Projekt an dem ich am ich habe drei Tonspuren just. Da sich zum Teil "abwechseln" other sharp (Musik wird leise wenn Sprache laut wird usw.) habe ich die print mit dem Audiomixer einfach für die Spuren der, da're sehr viel einfach ist als zu use Keyframes.

  Die Spurlautstarke ist aber ja nur an die Zeit gekoppelt, nicht an den Clip über dem sie liegt.

  Also, Wie kann ich jetzt die kleine sequence gained meines verschieben, aber, so dass die schon ausgesteuerte Tonspur mitkommt project?

  Würde mich freuen wenn ihr mir helfen könnt mir einen alterntiven Weg show konntet oder weiter.

  Viele liebe Grüße,

  Bill Scheicoina

  Hi Bill,

  Also entweder die sequence verschiebst sie und verschachtelst in einer neuen sequence, the play wie, oder Audiosspuren und lassost Keyframes, die Hat Dein mixer is both offnest (neben dem fondmetal Spurnamen in der timeline Keyframe symbol > show epi-keyframes) mithilfe Zeichenstift - Werkzeuges (P) und ziehst sie dann rüstig, den ensprechenden hingezogen der Clips As section wo.

  Spurlautstarke ist eben nicht an die fondmetal clips Paperback, die absolute Spur der Zeit.

  -und ich weiss, der eben auch Keyframes Audiomixer flower before.

  I hope, das hilft

• My iPad is dying? It keeps sending me back to the homepage while watching what either.

  My iPad IS dying? Continues to send me back to the home screen while watching what it's online.

  Hi Umeggie,

  Thanks for checking out the Apple Support communities! I understand that you are having problems with your iPad closing Safari and you return to the home screen. I use my iPad all the time for browsing with Safari, so I can understand how this can be a problem for you and am happy to provide suggestions.

  The first thing that I recommend you do is try to reboot your iPad.

  How do I restart

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  The next step you can take is to try closing the Safari app and try he raises. You will find the steps below. You can also test this on another Wi - Fi network (if you have one available) to make sure that there is not a problem with the Wi - Fi network to which you are connected.

  Force a nearby application on your iPhone, iPad or iPod touch

  The next step that I recommend is to reset your settings. This does not erase any of your data, but I recommend you save it just to be sure. You can find the steps for the backup of the below. To reset your settings, you will need to go to settings > general > reset > reset all settings. This will not erase any personal data of contacts, applications or pictures, but it will do the following: reset the restrictions de-register you FaceTime and iMessage, delete contact ID & password, remove Pay Apple cards, reset the wallpaper, brightness, sound, date & time. It deletes also all Wi - Fi network connections, so you'll need your Wi - Fi password to restore the link.

  The backup of your iPhone, iPad and iPod touch

  Take care!

• Combine all the video clips in a new clip

  Not exactly necessary for my workflow, but something I'd expect to see. In a main element with many intermittent faults, which I clean, either in the viewer or the timeline, my clips unique original becomes a series of video clips. With this master clip now cleaned, I couldn't want to change in a way that maps the changes done to eliminate imperfections. Kinda like having a $5, $4 1 s and the spare change to raise to $10 and preferring to have a single $10 bill, instead, another handful.

  The manual says no way to do it within the FCE. If I export the standalone series of clips as .mov, QT hit the resolution from 1080 to 720 (no thanks). If I export to QT conversion, the 1080 can be maintained, but the only file that results has its image reduced by 20% (?), surrounding it with black borders. When brought within the CTF, the clip is still listed as 1080. But I still have to resize it with success, as the means for it apparently do not allow borders to trim.

  TIA

  Try this:

  Re: Export in best quality

  Also, check the project properties are what you think they should be.

  Al

• Looking for guidance, Clip Zip or Clip +.

  My beloved clip zip just died.  I thought to replace it with the new sport clip, but a check of the forums told me it would be disappointing to at least.  I use my zip primarily audio books and have an extensive library of books on several chips for my Zip.  As I wanted to replace the Zip file, I discovered that it seems to be abandoned.  I can find a little but they are twice what I paid initially for mine and if Sansa is not making more...  Anyway, it also seems the Clip + is still in production.  Can someone tell me, the Clip will be + play chips I put in place for the Zip.  That what I lose in the way?  You recommend staying with the Zip for as long as I can get a new one to last?  I started with a simple clip and improved because of the chip.  Albumn art and color are not important to me, but with success to listening to audio books without editing each track is.  I'm looking for advice from my fellow lovers of Zip.  Thank you

  That's the beautiful thing about the microSD - can exchange cards in and out, including between the actors (including the Clip + and Clip Zip).

• Sansa Clip + in frozen

  Help please.

  After loading my Clip disconnected poster and full battery but is frozen. I can't turn it off or use one of the buttons. Could someone please advise on a cure.

  Press and hold the power button. Ususally 20 - 30 seconds. is sufficient to turn power off and reset at the same time, but he has been known to take longer in stubborn cases. If she died before 20 seconds. Press and hold the power button for the full count. Release the button, and then press a few seconds to turn it on again. It should start normally.

• My Sansa Clip is DEAD.

  So I was in the back seat of the car, listening to music, when all of a sudden, he just DIED. I thought that maybe the battery was dead (although it was unlikely that the power was 80 + %). When I got home, I connected on the computer to charge.

  ... nothing.

  I tried to turn it on, the buttons down, trying to get a sign that it might still work, but nothing has changed.

  It was not what I was doing which would have made him give outm like that.

  Help, please! I would like to know why he died and if I can fix it!

  This scenario and the question is asked several times a week...

  Reset it. If you have a Clip (original) hold the slide switch on the side in the top position for 20-30 seconds. Do not guess; count (a mississippi, mississippi two, etc.), or use a clock.

  With the Clip + press and hold the power button for the same amount of time. It must now start and operate normally.

• Clip + - all of a sudden no radio option available?

  My Clip + (including FM radio) works very well for a long time, when he decided to die on me.  Fortunately I found help and managed to revive and at the same time reinstalled the firmware (I have v01.02.18E now, don't know what it was before, but think it was the same version with an "S" at the end).  Alas! I now seem to have lost my radio option - simply put, it does not appear on the list.  I looked everywhere but could not find the cause or the solution.  Can anyone here help me?

  It's quite strange - is not a problem I remember having read here before.

  Just curious - under settings, you still have the Radio Options?

  Try this: under Settings/Control Panel, go to restore factory settings. It is perhaps accidentally using a locale that has no radio.

  Otherwise, Yes, reinstall the firmware. If you change the version number and copy this link in your browser, you will find the links to download the firmware also. But I don't see why the last would not work. I have 1.02.18P and it was defintely a radio in there.

• Clip + folder Shuffle function

  Hello. Someone can advise me please as to whether the Clip + has a shuffle folder feature. My girlfriend has used a creative stone more for years, but he died on it. She used the folder on this regualrly shuffle feature, so I would be grateful if someone could tell me if the Clip + has the same function before you splash out and buy her one for Christmas. Thank you very much.

  The Clip + has a Shuffle feature/function. It also has a function/feature of folder. But there is no folder shuffle function (combined).

  If you ask will it randomly read files; Yes, it will be. If you select a file to play and Shuffle is enabled, it will be ramdomly play files in this folder.

  If you ask a randomly selects one file, read the contents of this folder, then randomly select another, then no, it won't.

  But maybe you should explain exactly/specifically what you want the player to do, and we can let you know if it will be based on the needs of your girlfriend?

• Completely insensitive Sansa Clip

  I just bought a Sansa Clip 8 gb yesterday, and today I finally had the time and access to put the music on it. I installed Windows Media Player 11, sync my music, made sure it was fully charged and decided to go out for a run. I listened to a song repeatedly (he played throughout many times so far) when it suddenly stopped playing mid-song after about forty minutes. The menu screen do not appear, key does not turn on and I can not reset regardless of how long I hold it in the "high" position. If I connect it to my computer, it is not read (nothing appears on my computer)... in one of the USB ports. It is not read on another Windows XP computer in the House, either. I tried to install the update for Sansa, but it will not install as the Clip isn't well of my computer. I tried to hold the power button for 20 seconds, locking and pressing the main select button while inserting the USB cable and nothing helped. Curiously, it is still running as far as I can tell because when you plug / unplug the headphones you can hear the "flying" static, you would do an audio device in use. I can't return or Exchange it at Wal-Mart because I left the front desk in another State, and I'd really prefer not to send to the manufacturer at my own expense given their promise to offer a «free of defects of design» product If someone could help me troubleshoot my way in a working mp3 player, I would really appreciate it. Thanks in advance.

  I waited for Wal-Mart finish digging through their recipes to find the mine, and you know... after 60 hours of idleness, the Clip has decided to finally die. I could load after this and update the firmware. Should work fine now. I'll probably still pick up the receipt just in case.

• Crazy clip

  I use my review of Clip 4 GB 2 for a few months now.

  When I listened to the music on my music video the other day, the volume suddenly got higher and higher even if I didn't to anything. I tried the Volume button down, then others, even the slider power, but to no avail. Then, I tried the Hold switch and fortunately it worked. But the maintained lock icon appear, indicating that a button was pushed despite the fact that I didn't so something about the Clip. I slipped the cursor back toward the Center and tried to power off the device again. Surprisingly, this time, it worked. Since then, the Clip has not answered any button I press on when turned on more. Except when I push the Hold switch to lock and central position, the Clip meets a few touches, but shortly after that he is back to Stubbornville once again.

  I tried something that I can think of:

  The battery left to die by letting the music play uninterrupted music

  Plug it into a wall charger

  Connect it to a computer

  Downgrade then upgrade the firmware

  Format then reset

  Please, I beg you! Help me!

  Contact SanDisk directly for a replacement in the title of their 1 year warranty. There is nothing you can do as a user, to fix something which is an internal problem like this.