AppleScript: "equal" does not in "repeat to.

It is a fundamental question of Apple Script.

If I use one ' if A = test B' inside of a loop 'repeat for A {...} ". (I want to treat differently the values in the set), "A = B' is always false, even if A is equal to B." This is not a problem outside the loop, so I 'package A to B' and test.

This script demonstrates the problem:

(* This part works *)

Journal ""using \"set aVar to\": "

game aVar for 1

testValue (aVar)

game aVar for 2

testValue (aVar)

(* This part does not work *)

Journal ""using \"repeat with aVar in\": "

game aList to {1, 2}

Repeat with aVar in aList

testValue (aVar)

end Repeat

(* This method is used in the two pieces above *)

(* It tests the ' if A = B operation' *)

on testValue (variable)

If variable is equal to 1 then

Journal 1

else If variable is equal to 2 then

Journal 2

on the other

Journal 'nor '.

end if

end testValue

Responses resulting (from the log instructions):

(* using the 'value aVar': *)

(*1*)

(*2*)

(* using the "repeat with aVar in": *)

(* or *) <-should be (* 1 *)

(* or *) <-should be (* 2 *)

In the loop (second part), the 'testValue' method works differently outside the loop (first part) and incorrectly. The results of both parties must be the same.

What Miss me?

Use the following Manager:

on testValue (variable)

If (variable number) is equal to 1 then

Journal 1

Otherwise, if (variable number) is equal to 2, then

Journal 2

on the other

log 'none'

end if

end testValue

(141084)

Tags: Mac OS & System Software

Similar Questions

the AppleScript editor does not work

Hello

I have a problem: the applescript editor does not start. When I try to open this program, finder show that the editor is running. But he doesn't show me toolbar, mb air boot costs and in fact, that's all.

Can someone help me? screen filming wrote: no answer

Hello sashasonia,

Looks like the AppleScript editor does not open on your Mac and activity monitor shows that the program is not responding. I know how about them can be when programs and applications do not work as expected and I'm happy to help you to get AppleScript up and run again.

The first step is to force the AppleScript Editor to quit smoking and then try opening it again. To force the closure of the program, follow these steps:
To close an application normally, choose leave in the application menu in the menu bar, or press command-Q. If an application does not respond, you can force it to close it using the Force to leave:
1. Choose force quit from the Apple menu, or press Command-Option-Esc.
  This is to press Ctrl-Alt-Delete on a PC.
2. Select the application does not respond within the window to leave, then click on force quit.
Force a nearby application on your Mac.

If the AppleScript editor does not respond when you try to open it again, restart your Mac. To restart, select the  in the upper left corner of your screen, then "restart". Try again the AppleScript editor once you are logged into your user account.

If you still can't not to get the editor AppleScript work correctly, follow the steps outlined in the article below to start your Mac in safe mode, and then test the program again. Since starting in safe mode removes certain system and kernel hiding, check your startup disk and tries to fix the problems of directory, you will want to restart your Mac as usual again and test AppleScript editor once more when you are connected to your user account.

OS X El Capitan: start in safe mode

Thank you for using communities of Apple Support.

Take care!

You want to reload items * like parts does not. Repeatedly askes to enter the password but my collar does not.

You want to reload elements8 as parts does not. Repeatedly askes to enter the password but my sign in Photoshop will not work for the element. Help

Please post related queries from Photoshop Elements

http://forums.Adobe.com/community/photoshop_elements

Script using AppleScript GUI does not

Before we go too complicated, I'm starting to get a basic copy/paste using keyboard shortcuts to work. In theory, if I can copy a value of cells in another cell using keyboard shortcuts, I can use keyboard shortcuts, I need more complex scripts.

Can someone more well informed that I look over the below basic code and tell me what I'm doing wrong?

(I added the script editor to the security settings for accessibility to allow him to control the computer.)

My code for a simple copy/paste in figures (other programs also not to answer):

on run

say application "Numbers".

activate

if not (there are document 1) then error number 1000

say document 1

tell the worksheet active

the value the selectedtable to (the first table whose class of selection range is range)

the value myRows to count the lines in selectedtable

say selectedtable

the value the selection range of cell 2 of rank 3

sendCopy

the value the selection range of cell 4 of rank 3

sendPaste

end say

end say

end say

end say

end run

on sendCopy()

say application 'Numbers' to Activate

say application "System events".

say application process "Numbers".

key sequence « C »

end say

e nd dire

end sendCopy

on sendPaste()

say application 'Numbers' to Activate

say application "System events".

say application process "Numbers".

key sequence « V »

end say

end say

end sendPaste

Thank you

Jason

You favorite the AppleScript Language Guideand then use the appropriate syntax:

key sequence Using 'C' command down

key sequence 'V' with the command down

It may or may not be other contributory factors in your script as to why it does not work.

Verification of simple equality does not

Hello
one of my students there is a mistake, and I'm not.
It has a text entry box (a), and seeks to verify that the user enters 'one '. If he succeeds, it displays a message in the dynamic text box (b)
var x: String = "a";
btn_done.onPress = function() {}
If (a.text! = x) {}
b.Text = "Wrong";
trace (a.Text);
}
else {}
b.Text = 'Right ';
}
}
No matter what you type, the answer is 'bad '. I spent hours to research, but can not see the problem. Anyone can enlighten us please?

change the multi-line to single-line TextField.

(when a trace of the text seem to expect but does not act the way you expect, draw length, too.) that will reveal the problems of white space. in your case you probably have a return at the end of 'one' transportation. That is to say, 'One').

AppleScript rename does not lose extension

I wrote the following script:

on f Open

say application 'Finder '.

Repeat with f in f

Set newName to characters 1 through 5 of (get the name of f) as text

the value of f to newName name

end Repeat

end say

end Open

Is there a way to work with files OR folders and if it is a file, not remove the extension of it?

Any help would be greatly appreciated.

Add the following code between the two fixed lines:

If (class f) is not folder then set newName newName & "." & name extension of f

(141149)

Windows media player shuffle function does not work repeat the songs for two lanes

I run windows 7 and Media player as my player used by default since I use a computer a decade ago, I find it does everything what I want (in general), however, recently, when I open him and invariably put to play a playlist, if it's the shuffle, it seems to alternate between two songs, I then go manually click on another track that , for some reason, seems to sort it out. Any ideas please? Martin.

 Hi Martin, You may need to rebuild the database from the Windows Media Player library. Here's how: a. exit Windows Media Player. b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK. c. Select all files in the folder, and then click delete on the file menu. Note: You don't have to remove the folders that are in this folder. d. restart Windows Media Player. For further troubleshooting, see section to run the troubleshooting utility that resets the settings: <a href="http://windows.microsoft.com/en-IN/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter" rel="external nofollow noreferrer">http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter</a> Please let us know the results.

Firefox does not open Windows - intermittent - 10 pro

Once I click on the icon to launch the Firefox browser I momentarily have the little blue icon of waiting... then nothing.
I can use everything on the computer, including the border, IE, Chrome, and Safari.

If I go to Task Manager it shows Firefox without activity. I can summon a number of instances of Firefox all do the same thing... nothing.

If I finish all instances of Firefox in the Task Manager, then try to run Firefox again once it opens and works normally. I can run a number of instances, and they work as they should.

If I normally close all instances of Firefox, they may or may not work the next time I try to run Firefox (intermittent). If the browser does not, I repeat the closing the Firefox process in the Task Manager and then reopening it... It will work then.

I tried to do a clean install of Firefox without success. The same problem.
The new installation of Windows 10 pro (64-bit)

I have another laptop with Windows 10 with the same Firefox addons and same imported bookmarks etc. It works very well.
```
This is puzzling?? Any suggestions would be appreciated.
```
Thank you
Peter

Hi Fred,.

Thanks for your quick response. I tried your suggestion, but it did not work, but you got me thinking... Thank you.

What I did... I uninstalled Firefox and then deleted all the references in the window registry related to Firefox.
Then, I put the edge as default browser, restarted.
I then downloaded and did a new install of Firefox and set it as my default browser.
Rebooted just to be sure.

Yay! It works now.

Queue RAS does not work with "Key relachΘe".

Hello

probably just a simple thing I'm missing here. See the VI attached (including the Subvi). In case 1, I get the event button Up to ENTER and deliver a change in value on the Stop button. This translates into a verification of the length of the string, and where she is too short made up a dialog telling you the ID is too short and takes you back to the entry ID unfortunately - upon confirmation of the dialog with the ENTRY instead of using the mouse on the button sequence an event triggered again and then read by the Structure of the event.

So I thought I just rinse all the events in the queue. To be sure, I put a time value on the service of hunting that takes place AFTER the dialog box is complete, so the key place ENTRY should be deleted as well. Jinx is - it does not work. Someone knows why?

I tried both with the dynamic event, I have not registered right after that the stop event is issued in the case button upward. I then "re" sign for the key event to the top at the same time/position that hunting event queue function is now positioned in the VI below. Still no joy.

What was my mistake? Thank you very much.

Comrade wrote:

I don't understand 2 things:

(a) why the key, an event is triggered even? It does not come from the VI where the structure of the event and what 'Instance', the event is bound (VI-> up key), but from the dialog box (which is an another VI). Unless a call VI inherits all the events of his SubVIs or something like that.

(b) why isn't the event raised by the button in the dialog thrown as hunting event queue function is supposed to run?

Because you're slow. Not you personally. But compared to the computer, you just don't have a chance. If you hit the button Enter on the dialog box. OK button on this dialog box activates the button down. If the dialog box is long gone by the time you manage to get your finger on the Enter key. In fact, you loop must be around back to wait first for an event. So he is waiting for an event when you finally get your finger on the button. Hey, we have a key event to the top!

Your current checking for the validity of the id is just boring hard. Use the key down? event to check a valid character entered. Notice the '?' in my choice of event there? This means that it is an event of the filter. This means that you can throw (throw) the character being pressed before that same control sees it. You might also throw if there is already enough characters (greater than or equal, does not).

Vista does not always start cleanly

I'm trying to help my friend to a problem with his Dell Inspiron 530 computer. The computer running all day but she she stops during the night. After a series of updates, the computer would need a "repair" or restore. Repair worked. The interesting thing here is that sometimes the system starts properly and other times it's not. When I went to check, it starts perfectly every time. She's frustrated. I love Vista and have had similar problems on my computer laptop but resolved. Any ideas? I tried to compare the information of updating my laptop on his desk but my laptop is older than 3 months and I didn't have time to check each number.
Thank you

Hi azcoop33,

Thanks for posting on the Microsoft answers Forums.

Be you please perform a clean boot on your system to see if that helps to clear up the problem that you are experiencing?

Here are the steps on how to perform a clean boot on your system:

First step: perform a clean boot

1. sign your computer with an administrator account.

2. click on start.

3. type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

4. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

5. in the general tab, click Selective startup, and then click to clear the check box load startup items.

6. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

* NOTE: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

7. click OK and then click on restart.

Second step: enable half the services

1. start the System Configuration utility. Refer to the steps above if you need to see how to do this.

2. click on the Services tab and then click to select the skin all the Microsoft services checkbox.

3 click to select half of the check boxes in the Service list.

4. click OK and then click on restart.

Step 3: determine whether the problem returns

If the problem persists, repeat the first stage and the second stage. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

If the problem does not occur, repeat the first stage and the second stage. In the second step, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to sixth step. If no service is causing this problem, go to step 4.

Step 4: enable half of the startup items

Perform a clean boot by repeating step 1.

Click the Startup tab, and then click to select half of the check boxes in the startup item list.

Click OK and then click on restart.

Step 5: determine whether the problem returns

If the problem persists, repeat the first step and the fourth step. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

If the problem does not occur, repeat the first step and the fourth step. In the fourth step, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to sixth step.

If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat the first stage and the second stage without selecting the skin all the box Microsoft services at every step.

Step 6: resolve the problem

After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

Step 7: solve the problem

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

1. click on start

2. type msconfig.exe in the start search box and press ENTER.

3. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

4. on the general tab, click the Normal startup option, and then click OK.

5. When you are prompted to restart the computer, click on restart.

Here is the KB article that came as follows:

http://support.Microsoft.com/kb/929135

After running the clean boot please post back and let us know if it helped to solve your problem or not, so that we can help you if necessary.

Robyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Problems with latest updates Windows (KB) do not install & repeated notifications via the taskbar icon

Hello everyone,

In my view, there are many people who seem to have a similar problem to mine, although I was unable to find an answer to one of my questions in this post.

Description of the problem:

Although my Windows Update is defined on download & install updates during the night hours every day, the latest updates, KB26333880, KB2572073and KB2518864 are not be installed. I went to the Windows Update site to check my editing history. He showed the green/white checkmarks next to all 3 updates. The record also showed that updates have been tempted 3 times during the night. After clicking on the button "Express" on the Home Page, the results show 3 above updates, but show "0 bytes', then '0 download time. '

To me, this indicates that there is no update to download, despite the yellow Shield of Notification of update continues to appear in the taskbar.

Corrective measures attempted:

1. I tried to download / install twice unsuccessfully using IE8 and FF (including restarting the computer).

2. download & run the program MS Fixitattempted, but received a message which read, "an unexpected error has occurred, please try again later." No. error code has seen with this message. (I could RECORD the program on my desktop... just couldn't run the establishment).

3 tried to search for the presence of these updates using start > run > %windir%KB###.log (where the # is the individual number of update KB). Every time - a message appears indicating that the file is not found.

4 looked at the Add/Remove Programs list (with the Show updates checkbox checked). No updates KB mentioned above could be found.

5 with SAS, MBAMand Outpost Security Suite Pro scans revealed no malware/security issues. (SAS and MBAM are used only as scanners on request).

This problem with the updates does not download & repeated notifications being indicated in the taskbar has occurred many times before. On this occasion, I called Microsoft several times before finally, my computer remotely accessible support person and spent about 50 minutes to fix the problem.

(Also, it is noted that almost every support person I spoke with has always tried to tell me that MS is not help with the problem of this type.) I had to be rather several in my reply... tell the person that MS IS in fact provide assistance free security-related Windows updates. They now provide free assistance is unknown). Besides... I have more a phone number for States anyway.

My questions to the community:

1. is it possible to download & install these 3 updates?

2 is there an explanation as to why MS Fixit program will not be installed, and if so, are there certain corrective measures I can take which will allow me to download & run this program?

System Specs:

Desktop Dell Dimension 3000 Tower; WIN XP Pro SP3. 2 GB OF RAM; 3.00 gHz CPU; Outpost Security Suite Pro. MBAM Pro (on request only). SAS (on request only); SpywareBlaster; IE8 & FF

Thank you for your time and help, review!

Pete C.

See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

Explorer Windows (Vista) does not

I struggled for a few months with Explorer windows (Vista). It all started after an automatic update that has been made by my computer. Whenever I try to click on something on my windows downstairs bar it freezes and gives me the error message "Windows Explorer is not responding do not." (NOT INTERNET EXPLORER) I also lost my sound completely software. Then, I restored my computer to a point of origin. But shortly after that my computer re-out to date, and although my sound has no problem now, I always get the error message "Windows Explorer is not responding" very annoying whenever I try to use my windows taskbar. The research I did I found many people with the problems I experienced. But not onecanseem to give the right answer on how to solve this problem. It only happens with Vista. Y at - there anyone who can help?

Hi coolis,.

There are many steps that we could try to try the basic step, it will take place the computer in a State of clean boot, put the computer in a clean boot state followed the following steps:

Step 1: Perform a clean boot

Log the computer by using an account with administrator rights.

b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

c. under the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

d. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

e. click OK and then click on restart.

Once you reboot check if the problem is solved in the clean boot state.

If the problem occurs not in a State of boot, follow these steps to diagnose the component program or start that is causing the problem.

Step 2: Enable half of the service

Follow steps 1a and 1B to start the System Configuration utility.

Click the Services tab, and then click to select the skin all the Microsoft services checkbox.

Click to select half of the check boxes in the Service list.

Click OK and then click on restart.

Step 3: Determine whether the problem returns

If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

Step 4: Enable half of the startup items

Perform a clean boot by repeating step 1.

Click the Startup tab, and then click to select half of the check boxes in the startup item list.

Click OK and then click on restart.

Step 5: Determine whether the problem returns

If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be the cause of the problem, repeat step 1 and step 2 without selecting the skin all the box Microsoft services at every step.

Step 6: Resolve the problem

After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

Step 7: Reset the computer to start as usual

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

Click Start, type msconfig.exe in the start search box and press ENTER.

If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

On the general tab, click the Normal startup option, and then click OK.

When you are prompted to restart the computer, click on restart.

You can also check out the link below for the steps above:

http://support.Microsoft.com/kb/929135

I hope this information is useful.

Please let us know if you need further assistance.

Concerning
Rehman - Microsoft Support

Vista-Defrag HD does not end

When I tried to run defrag manually it will run for hours and does not complete

Hi cms1956,

Please try and do a clean boot on your system to see if that helps you with the problem you're having with your computer defragmentation.

Step 1: Perform a clean boot

a. connect to the computer by using an account that has administrator rights.

b. click Start, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

If you are prompted for an administrator password or for confirmation, type your password, or click continue.

c. in the general tab, click Selective startup, and then clear the Load Startup items check box. (The use original Boot.ini check box is not available.)

d. in the Services tab, click to select the hide all Microsoft services check box, and then click disable all.

e. click OKand then click restart.

Step 2: Enable half the services

a. follow steps 1a and 1B to start the System Configuration utility.

b. click on the Services tab and then click to select the hide all Microsoft services checkbox.

c. click to select half of the check boxes in the Service list.

d. click OKand then click restart.

Step 3: Determine whether the problem returns

If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

Step 4: Enable half of the startup items

a. perform a clean boot by repeating step 1.

b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

c. click OKand then click on restart.

Step 5: Determine whether the problem returns

If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

Step 6: Resolve the problem

After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

Step 7: Reset the computer to start as usual

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

a. click Start, type msconfig.exe in the Start Search box and press ENTER.

If you are prompted for an administrator password or for confirmation, type your password, or click continue.

b. on the general tab, click the Normal startup option, and then click OK.

c. when you are prompted to restart the computer, click restart.

Please see the following article for all of the above information: http://support.microsoft.com/kb/929135

Please let us know if this solves your problem, or if there is something more, you want to help with.

Robyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

my computer is not letting me log in. it gives me the error "service provider of the user does not.

I get an error message when I enter my password 'user profile service cannot open a session' what should I do? I already turned off the computer and turned it back

Hello

Here are a couple of things to try.

Shut down the PC. Tap away at f8 that you start the PC to enter the Windows Recovery Console. Use the arrow keys to select Safe mode and press ENTER. If this will load in the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore. Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration. When you are finished, Windows will restart as usual - see if you can now log on your profile.

If the above does not help, repeat the first part of the procedure of launching Windows Recovery Console, but this time use the arrow keys to select "start using the last good known Configuration" and press to enter.

Kind regards

DP - K

As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

Hello

Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

AppleScript: "equal" does not in "repeat to.

Similar Questions

Maybe you are looking for