Verification of simple equality does not

Similar Questions

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• simple pass does not work to open emails

  simple pass does not work to open emails

  Duplicate the content of the Post-

  My os is windows7 IE9 browser

  Pass Simple contact support.

• Comparison of simple table does not. Help, please!

  I struggled with this problem for a few days now, and I'm slowly losing my mind.

  • I am in Adobe Acrobat 10.
  • I have a field called button group: btn0, btn1, btn2, etc..
  • I have a band called text fields: txt0, txt1 txt2, etc..
  • I have a script that takes the value of txt0 and makes the legend of btn0 and so on.
  • I have a script that sets the btn0 to setFocus txt0 MouseUp action, and so on.
  • These scripts work very well.
  • I have a script that takes values of all fields txt and sort puts them in a table.
  • I have a script that takes the array element [0] and makes the legend of btn0 and so on (alphabetical list of buttons).
  • These scripts work very well.
  • I am trying to compare the value of the array element [0] to each field txt to find the match, then set the action MouseUp btn0 to setFocus to the corresponding txt field, and so on (until my alphabetical list points to the correct location).
  • It is here where I am at a loss.

  Here's what I have:

  specified fields txt

  txt0 var = this.getField ("name of Z");

  txt1 var = this.getField ("name");

  etc.

  put their values in an array named rxArray

  var rxArray = [txt0.value, txt1.value]; etc.

  sort the table

  rxArray.sort ();

  Set the legends on the sorted array elements

  for (var i = 0; i < 5; i ++) {}

  var b = ("btn" + i);

  this.getField (b) .buttonSetCaption (rxArray [i]); works very well; sort by alphabetical order of the list of buttons

  Here is what goes wrong

  for (var x = 0; x < 5; x ++) {}

  var r = ("txt" + x);

  If (rxArray [i] == r.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  }

  }

  }

  end

  Here's what I know:

  Alphabetical order and labeling works very well, but the MouseUp scripts to buttons work at all. Nothing happens.

  If I change the piece next to the above script:

  If (rxArray [i] == r.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  To do this:

  If (rxArray [i] == txt1.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  Because rxArray [0] is equal to the value of txt1 ("name"), then the MouseUp script for btn0 Gets the value:

  Txt4.SetFocus ();

  So I know that, whenever the nested loop runs, the case statement is true, and the setFocus script updated. Until the end of the loop, leaving the setFocus as last run element. Then why my script does not work? It should only update the setFocus script IF the array element matches the txt field and it is on THIS field of txt.

  Please please help. I know I'm missing something simple somewhere.

  I don't see why you would need tables at all... For example, sortNumber.

  You can essentially all this code replace it with this:

  for (var x = 0; x)< 5;="" x++)="">

  var t = this.getField ("t" + x); the text field

  var b = this.getField ("btn" + x); the button

  b.buttonSetCaption (t.value);

  var s = "this.getField('"+_t.name_+"').setFocus()";

  b.setAction ("MouseUp", s);

  }

  It is the same for the rest of your code as well.

  With respect to the addNew function, you must add a pause command inside the if statement to prevent continue further after the first empty field has been found.

• Identity-E / verification of education still does not

  So I bought the Adobe website on March 30, 2012 LR and it is May 1, 2012, so you can see why it is irritationg.  I was passed back between Adobe cat people and Service identity-E customer without answers.  I gave screenshots, source codes and sent my evidence directly to the Adobe email address and nothing has changed.  This is by far the worst situation of custmer service in that I've never been.

  What nobody seems to understand is when you connect and click on your order and then submit proof, he updates the site identity-E, where you fill in your State, city and name of the Institution - you can fall down and fill out everything EXCEPT the institution.  You CAN NOT click on submit, or move forward to get a product code because those big red letters saying "'you must provide the name of your institution." " So all of the reps of serivce customer I talk to who continue to ask for it-it will NOT generate at the moment 564898237

  I tried 6 different computers in different cities, Chrome, Google, IE - even by behind a firewall public University and nothing happens.  Looks like that now there is an icon of the House which turns in a circle and says loading.

  But I raise the question that since this isn't the student verification, don't you think that people might need this for school?  I am simple and plain angry.  I don't know what is so hard to understand that you relational database is not coded correctly nd sure the path to the drop-down list and pull somesort SQL does not work.  It's been over a month and I would really like to get what I paid for.

  I wonder how many people fail to a class because of this - we lodge a complaint for a refund of a mile?

  
  

  I was able to locate your order AD001310328EDU and approved the Decree based on your previous presentation of further evidence.  I've also updated your case 208091603 that the order had been approved and closed.  You should now be able to follow the steps listed in the http://forums.adobe.com/message/3980334#3980334 to get your copy of Photoshop Lightroom 4.

• AppleScript: "equal" does not in "repeat to.

  It is a fundamental question of Apple Script.

  If I use one ' if A = test B' inside of a loop 'repeat for A {...} ". (I want to treat differently the values in the set), "A = B' is always false, even if A is equal to B."  This is not a problem outside the loop, so I 'package A to B' and test.

  This script demonstrates the problem:

  (* This part works *)

  Journal ""using \"set aVar to\": "

  game aVar for 1

  testValue (aVar)

  game aVar for 2

  testValue (aVar)

  (* This part does not work *)

  Journal ""using \"repeat with aVar in\": "

  game aList to {1, 2}

  Repeat with aVar in aList

  testValue (aVar)

  end Repeat

  (* This method is used in the two pieces above *)

  (* It tests the ' if A = B operation' *)

  on testValue (variable)

  If variable is equal to 1 then

  Journal 1

  else If variable is equal to 2 then

  Journal 2

  on the other

  Journal 'nor '.

  end if

  end testValue

  Responses resulting (from the log instructions):

  (* using the 'value aVar': *)

  (*1*)

  (*2*)

  (* using the "repeat with aVar in": *)

  (* or *) <-should be (* 1 *)

  (* or *) <-should be (* 2 *)

  In the loop (second part), the 'testValue' method works differently outside the loop (first part) and incorrectly.  The results of both parties must be the same.

  What Miss me?

  Use the following Manager:

  on testValue (variable)

  If (variable number) is equal to 1 then

  Journal 1

  Otherwise, if (variable number) is equal to 2, then

  Journal 2

  on the other

  log 'none'

  end if

  end testValue

  (141084)

• HP Simple pass does not properly.

  I just bought a HP Envy 17 TS last Friday. And the finger print scanner does not work properly. On the basis of the recommendations of the Forum of Microsoft, I deleted and updated drivers for both the pass Simple biometric and HP.

  Here's the situation. HP Simple pass works for passwords of website and all but don't work try to use it to connect to windows itself. However, if I uninstall use the print and Pass Simple unlock this 8.1 of Windows has its own, it works. Pass Simple to reinstall and it stops working again.

  dmcbain,

  Welcome to the HP Forum.

  There are a lot of Envy 17 over there - I think left, unsaid and you details give a better idea - it should be sufficient because they are similar in nature (structure and file locking).

  It is likely that your laptop came with HP SimplePass version 8.x installed - it's the Softex version and it should work pretty well, and he would be able to get along with native login provided with Windows 8.1.

  You could try the following to see if you can get things back in order.

  Reminder: For best results, do not skip a recommended reboot sequence.

  • Make sure that all of your Windows updates are complete and up-to-date.  This is essential.  On a new system, it takes a few laps and restarts.  Once updates are complete, you can, if you like to put updates 'Notification' for the future.  If you install a new Windows updates, restart the laptop.
  • If you have not yet, download install .NET Framework 4.5.1: Microsoft .NET Framework 4.5.1
  • If you install the framework, reboot the laptop and connect
  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8
  • Start > type anywhere 'rebecca' or Recovery Manager >
  • Click here to start the Recovery Manager > under "I need immediate help" >
  • Drivers and reinstall Applications > find and reinstall your driver fingerprint sensor fingerprint validity
  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  Consider: you can probably run the version of HP SimplePass 6.x on this system - it is AuthenTec version, fully functional in terms of features and support webcards and Windows logon, too.

  See the following to download and install HP SimplePass version 6.x.  You can skip the part about reinstalling your fingerprint driver - you have completed this step.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  HP will never call on the phone and ask for money to 'secure your PC.

  Say "No, thank you," and hang up.

  Cybercriminals can call you on the phone and claim to be from Microsoft.

  See: Microsoft Safety & Security Center

  Mark my answer "accept as Solution" when providing a solution or workaround!

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• HP h8 - 1280t: simple click does not

  I use a HP h8 - 1280t Intel core i7, 3.62 GHz, mem 10 GB, 1 TB hdd, Win 7/64.

  I did a post on the Windows Forum on this issue and not help.

  I'm using the option click on my mouse, but in recent days the single click does not always work.  Whenever I have simple click on a desktop icon, a file or something in a file/document, or anything else, nothing happens. It usually takes 2-5 left clicks to do anything. Makes no difference if I'm working offline or online. This also true if I change back to double-click.

  I only did 2 restorations - no help. I also run scans on the hard disk and the registry. No help.

  I beginning to think that I might have to do a restore to factory settings but don't want to do that. Too heavy and a lot of time to get everything back to "normal".

  Any ideas what could be causing this?

  Any help appreciated.

  Hello

  I use wireless on 4 different PC Logitec mouse and they were generally excellent, with a few exceptions (BIOS problems) and interference of frequency from other devices.

  If you have any doubts, try a wired mouse.

  Thanks for posting on the forum.

• HP envy 15-j067cl Simple Pass does not work

  Just bought Envy 15-j067cl yesterday with the fingerprint reader, which I've never used it before.  I did all the updates of Windows 8 and then upgraded to level to Windows 8.1.  I uninstalled Norton, using the removal tool, because I have a current subscription for other security software.  I tried to find a way to implement the Simple collar, which is what I understand how to set it to use my fingerprints.  I was unable to put in place.  I checked for Validity Sensor Device Manager and saw the yellow exclamation with this message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "

  I checked this site, saw a suggestion for drivers of HP recovery, so I did it and now the validity sensor does not show in the Device Manager.  It shows only as "unknown device - another device."  How can I fix it?

  Hello

  First, if you haven't already done so, install the driver from Chipset 8.1 on the following link.

  Chipset Driver - Windows 8.1

  When this has completed, restart the laptop.

  Then see if you can install the following Validity Sensor driver.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63418.exe

  Kind regards

  DP - K

• TestStand Simple OI does not close properly

  Hello.

  We need to build a test system that runs TestStand 4.2 and code modules are created with LabVIEW 9.0. The SW is running on a PC with Windows XP.

  We currently use TestStand Simple (LabVIEW version) User Interface to run the tests, and with the Interface of the operator we have a problem.

  If we use the file TestExec.exe provided with the installation of TestStand, everything works fine. But we need to make some modifications to OI and if we open the project file, and then recompile the IO, then the IO does not properly close. It seems the execution testengine stop and stop the VI, but the window doesn't go away until move us the mouse.

  When I open the LabVIEW project file informs me that the project was saved last version 7.1.1 and we now run 9.0.

  Can someone tell me what is now the window on the screen until there is activity on the mouse?

  I found a solution.

  But I'm still a little bit frustrated because I have no idea why it works...

  Anyway, if I open the vi for the OI Simple properties, go to execution and change the enforcement system preferred UI Standard, then the problem goes away.

• a simple contact does not email

  Just tested the simple contact form on my Web site and it does not transmit to my email address.  The form shows message sent but it never happens.  Muse 2015.0.2.4 CL792950, published site by and hosted on BC.    Any help?

  The problem was with BC and is corrected now.  Thank you.

  cell phone: 775-276-2866

  Visit my website, videos for good people and good causes:

  http://marcialreiley.BusinessCatalyst.com/

  or my bio to:

  www.LinkedIn.com/in/marcialreiley/

  Wednesday, November 18, 2015, at 16:44, Sanjit_Das [email protected]>

• 960px simple html does not work?

  I have b een coding of pages a while but it's puzzled me.

  I have a page with simple code:

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN".

  " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD "> "
  " < html xmlns =" http://www.w3.org/1999/xhtml ">
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  < title > Untitled Document < /title >
  < style type = "text/css" >

  {#960Wrapper}
  Width: 960px;
  background-color: #0F0;
  margin-right: auto;
  left margin: auto;
  }
  #header {}
  background-color: #C9F;
  }
  #footer {}
  background-color: #C0F;
  }
  < / style >
  < / head >

  < body >

  < div id = "960Wrapper" > content for id WrapperPage goes here
  
  < div id = "header" > this part is reserved for the logo < / div >
  
  < div id = "contentArea" >
  < p > please click a button: < /p >
  < / div >
  
  < div id = "footer" > this part is reserved for the footer < / div >
  
  < / div >
  
  < / div >
  < / body >
  < / html >

  However everything goes full width and edge of the browser - all of them.

  Maybe my grey cells are tired - or something is damaged but the machine won't accept - in or out of dreamweaver.

  I rebooted - run ccleaner and restarted again, but something does not work for me.

  I would be grateful if someone could confirm that I don't go crazy if you please.

  Terry

  #960Wrapper

  A class or ID name must not start with a number.

• My corner Simple touch does not appear in ADE (Mac)

  Hello

  I currently have a Nook Touch Simple (version 1.2.1 of the software).  When I connect it to my MacBook Air (Version 10.9.3) it does not appear in ADE (3.0), which is in turn allows me to transfer books. Suggestions for out of boredom is greatly appreciated.    I have attached a screenshot.

  

  Discovered that I had a bum cable that loads but did not connect with my computer

• Dissolve simple cross does not work

  Hi, I'm relatively new to first CC, so forgive me if this is a simple solution. I looked on forums for hours trying to figure out why I can't get my simple cross-dissolution to work.

  I'm putting a transition between two clips .mp4, but instead of put in a decent length transition, made first an a TINY (1-2 frames) and then doesn't let me change its duration by dragging. If I manually change the duration by typing in it, it does not develop the transition, but with lines through the calendar item (as if I was applying to a clip without handles). I confirmed that I have handles, and the transition to work on any other cilps.

  I spent more than two hours trying to get something to work that should take less than 10 seconds. Any help is appreciated.

  Handles the item and transitions

  #WS17A423FB-FEF8-4172-A7C8-8521D8CCB8C8 of http://help.adobe.com/en_US/PremierePro/CS/using/WSE2A9B838-1422-4d8a-9A03-CFDF4332533B.ht ml

• InDesign DPS: Simple Animation does not work in 'folio '?

  I'm building a recipe simple app using InDesign CS6, using the tools of digital publication.

  On one page, I applied an animation, "fly from bottom" in the subject.

  When I finally build the folio and view it on my ipad with the Adobe Content Viewer, the animation does not work on this page.

  I looked at a few tutorials on the use of the animation tools, how to set the path, etc. but none of them mention any other measure for the animation to work once you build the folio.

  Am I missing something?

  Thank you!

  Bruce

  InDesign animations are not supported in DPS. They are only SWF.

  Bob