Vista-Defrag HD does not end

Similar Questions

• the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  HI sselden,.
  Thank you for your question. Currently the version that you are on the old version. The current version is 29 and the beta version is 30.

  I recommend you to install a new beta version or the more up-to-date. http://www.Mozilla.org/en-us/Firefox/channel/

• Satellite L355 - dreaded blue screen - Bios does not end

  I have a new Satellite L355.
  Sometimes at startup I get the DBS.

  Otherwise said, the bios does not end and the screen is blank.
  Laptop repair center replaced the motherboard twice, but I still have the problem.
  I found that if I turn off the power and remove the battery, I can start very well after the replacement of the battery.

  Does anyone know why the battery clears the problem?
  Toshiba technical support often has a user that to clear a trouble report. They must know something.

  Thank you, jack

  > Occasionally when booting I get the DBS

  That would mean that this sometimes happens from time to time but not always
  Is this good?

  I think that it of difficult to say what's going wrong here because the question is not always happens... so it is difficult to replicate it
  Usually if the POST (power on self-test) cannot transmit properly then that would mean that a material error has been detected somewhere on the map

  Maybe you should check if the laptop using the latest version of the BIOS.
  If a new BIOS has been published, then you should try to update.

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• Update for Windows Vista (KB969947) security does not maintain install

  Update for Windows Vista (KB969947) security does not maintain install
  I have tried several times over the past two months installing this update, nothing seems to help scaned pc thinking it as spyware or some other malicious code nothing it just fails and I can't clear it out! any help at all would be great!
  Thanks in advance

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  The foregoing despite...

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for Windows Vista (32-bit) does not always update

  I saw the many threads on this topic; many recommend that you manually download updates, but none give instructions on how to download manually.

  If I try to download something from Microsoft Websites, I get an error saying that the I do not have a program that will open the download and does not suggest which will download programs or install updates.

  Is there anyone who knows the same question.  I'm at the point where I'm done.  I spent too many unproductive hours on it, and Microsoft does not seem to care enough to post a fix.

  Any help would be appreciated!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• have windows vista and it does not recognize a blank cd - r when inserted

  I have windows vista and it does not recognize a blank cd - r when inserted. I think that it is the drive d. I then put a cd - r with music on it and it does not even recognize them. When I put a game disc in there he reads very well. What is the problem?

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are unable to read CD - r discs on the computer. Please correct me if I misunderstood.

  1. What is the brand and model of the DVD player?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned below and later a update on the State of the question.

  Method 1: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060

  Please follow these recommended steps and post if you still experience the problem.

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• My download CS6 manages at the end and fill the bar but hangs and does not end?

  Any help on the above would be welcome. I am operating an iMac with OS X Maverick 10.9 and the download starts and runs OK, gets 3.78 3.78 GB GB but then does not end and hangs at this point?

  I downloaded successfully, now after connecting the router to the iMac with an Ethernet cable, so even if it was able to fully download on more than once for some reason any it would not complete and open the disk image to install.

  Thanks for your help.

  Concerning

  Mark

• X 64 Vista Home Premium CHKDSK does not end. No errors.

  I am running Vista Home Premium 64-bit and I get chkdsk runs whenever I start. It runs from stage 1 and complete with 9% of total. Then he will begin to step 2 and 55% of total and the program will stop. However, Windows will continue to start. The problem is that when I try a system restore, it fails and says that there is errors on the disk C: (part of Windows). I tried using F8 repair this computer option and get the same results. I bought and OEM "Vista repair disk" which looks exactly like the F8 option and she also does not terminate and the system reports errors on the restore disc. I tried the "right click on the hard drive" with windows to the top one and error-checking and it will plan a more late and ending. I got a call from the OEM Disk Checker 3.3 of the RS Software Lab disc verification program. I can get it to run and report errors, but I can't seem to fix. It will also schedule chkdsk to run pre-launch who did not finish. What can I do else?

  Hello

  You can follow the methods below and see if it helps.

  Method 1

  You can perform a clean boot to find with which service third is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Method 2

  If the problem persists, you can browse the drive in safe mode check and see if it helps.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3

  If safe mode does the same thing, then start at the prompt of the WinRE and run the command chkdsk from there.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Windows Vista (64-bit) does not start.

  Last night, I installed the new McAfee antivirus due to having a virus that prevented the windows firewall to allow me to surf the net via my router (usually would work when directly connected to the modem). The antivirus has worked very well and I was able to access the internet very well. The rest of the evening consisted of me Star Trek Online patch and play a little of it and there was still no problem. This morning I woke up to find my computer screen in the the Startup Repair stating that it could not load Windows Vista.

  Here are the details given after that Startup Repair ends:

  Problem event name - StartupRepairV2
  Prob GIS 01 - AutoFailover
  Prob GIS 02 - 6.0.6001.18000.6.0.6001.18000
  Prob GIS 03-6
  GIS 04 196611 prob
  Prob GIS 05 - BadPatch
  Prob GIS 06 - BadPatch
  Prob GIS 07-0
  Prob GIS 08-3
  Prob GIS 09 - WrpRepair
  Prob Sig 10-10
  Version of the OS - 6.0.6001.2.1.0.256.1
  -ID of locale 1033

  I tried to go in Mode safe mode (F8) and it still won't start. The Startup Repair cannot repair. Any suggestions?

  Hello

  You can perform a recovery of windows system restore and check.
  Follow the step from the link provided.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  We need the DVD of windows to solve the problem. I suggest you to contact the manufacturer of the computer and get windows vista DVD. If you are able to get the Windows DVD and then, I suggest you to follow the steps in the supplied knowledge base articles and check.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

  If you are not able to get the Windows Vista DVD, I suggest you contact dell and request a recovery DVD

  Contact us
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

• My "restore from backup" does not end as the screen lock appears

  I got a new iphone with 64Meg and OIS 9.3.3 6 operating system. Before putting in my business phone; I backed up my data on itunes using my PC with Windows 10. As I'm trying to "restore backup" on an iphone same 6, I was unable to do, when to halfway through the download process, the screen lock appears and disconnect the iphone from itunes and the download stops. It seems to be appx 29 minutes for download; but I never got rained only 7 minutes to download completion before the screen is locked or the battery at 100% load indicator disconnect the iphone.

  I have disabled all notifications, deleted my AOL Mail, set the screen saver to "never", off of password, all without success. Help!

  Hello, Franklytex!

  Welcome to the communities of Apple Support and post your first message! Looks like you have a problem to restore your backup from iTunes. I know how important it is that your iPhone can be restored properly! Read this article which has steps for you If your iTunes backup could not be completed or you can not restore from a backup. More precisely:

  Try again after each step

  1. Make sure you have the latest version of iTunes.
  2. Connect your device to your computer with a cable USB, then Select your device in iTunes. If your device does not appear in iTunes, you must correct this problem until you can continue. Or, if you have forgotten your password or your device is off, know what to do.
  3. Turn off your computer and your iPhone, iPad or iPod touch. Then turn on again them.
  4. If you use a Mac, skip this step. If you use a Windows PC and iTunes will not respond or never ends your backup, you may need to to update, edit, disable or uninstall your security software.
  5. If you have multiple computers, try to make a backup on your other Mac or PC. Otherwise, use iCloud for save your device and restore it from your backup to iCloud.
  6. If you see an alert indicating an error has occurred, your backup is corrupt or incompatibleor there is not enough disk space, find your error message below to learn what to do next.
  7. Contact Apple technical support.

  See you soon!

• Satellite X 200 - after upgrading Vista remote control does not work

  Hello

  I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

  Is there a driver for my remote?

  You may need to install the infrared driver.
  This driver is required to activate the infrared port on your laptop.

  You can find it here in the X 200 section
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp