Application error sending

Similar Questions

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Event 1000, Application error (the default application name: w3wp.exe - name of the failed module: KERNELBASE.dll)

  Hello guys,.

  During the execution of a web app to make me as a mistake: remote server does not. Here are the details of the spectators of the event who were captured at the same time where this error occurred:
  Event 1000, Application error
  The failing application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1

  Exception code: 0xe053534f

  Offset: 0x000000000000a88d

  ID of the process failed: 0 x %9

  Start time of application vulnerabilities: 0 x % 10

  The failing application path: %11

  Path of the failing module: 12%

  Report ID: 13%
  Event 1001, Windows Error Reporting
  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: w3wp.exe

  P2: 7.5.7600.16385

  P3: 4a5bd0eb

  P4: KERNELBASE.dll

  P5: 6.1.7600.16850

  P6: 4e211da1

  P7: e053534f

  P8: 000000000000a88d

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERC9CE.tmp.HDMP

  C:\Windows\Temp\WEREE30.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: d46a6849-8f6a-11e1-98af-00215e6e4855

  Display state: 4
  It is a priority issue we are facing in IIS. IIS is configured for the 2.0 Framework and underlying operating system is Windows Server 2008 R2 Standard. Please suggest how to solve. Any input related question above is significant.

  Hello

  In dealing with the problem with Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Error code: WerFault.exe - Application error

  I use Windows 7 and get an error Code

  WerFault.exe - Application error

  The Instruction at 0xfcf9c9fe reference memory 0 x 00000001. The memory could not be written. Click here to put an end to the program.

  How can I fix it?

  
  

  Hi Mel9543,

  ·         When you get this error message?

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  You can access here Windows error reporting settings: Control Panel > system and Maintenance > Problem Reports and Solutions > change settings > advanced settings

  Try to disable it temporarily and see if this will fix the problem.

  As a temporary solution you can disable the error reporting service: Press Win + R, type services.msc find Windows Error Reporting service in the services list, make a right click on it-> click Properties-> open list "Startup type" and select "Disabled"--> press OK.

  Then check and see if you still get the error werfault.exe on opening the programs.

  Since you have just installed Windows 7, please check you have all your device drivers updated to a version of Windows 7. If you can't do it in normal mode, then go to safe mode and check device manager.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  For a similar question, see the link: http://social.answers.microsoft.com/Forums/en-US/w7programs/thread/ad18ac26-105e-4930-9024-6de26ed55e30

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WerFault.exe - Application error, cannot open all the files.

  Original title: any file does not open

  I am not able to open files, it says

  WerFault.exe - Application error

  The instruction at ox74d7b89a referenced memory at 0x00000008. the memory could not be read.

  Click on ok to terminate the program.

  Hi Dev,

  Were there any hardware or software changes made on the PC before this problem?

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  This error can be caused by bad memory or a file system corruption.

  Kindly, follow these methods and check if that helps.

  Method 1:
  Step 1:

  Run the Memory Diagnostic tool.

  Follow the steps to run the Memory Diagnostic tool:
  a.Press Windows key + W on the keyboard and type 'memory' without the quotes.
  b. click on "diagnose your computer memory problems".
  c. Select the recommended option to run the tool.

  Step 2:
  Try to increase the virtual memory and check the issue.

  a. press the Windows key + X, choose Control Panel.
  b. click system and security , and then click on System.

  c. click on Advanced system settings in the right panel.

  d. click on the Advanced tab in the system properties box.

  e. click settings in the Performance section.

  f. click on the Advanced tab in the dialog box.

  g. click on the change button.

  Now, in the virtual memory dialog box, you can change the settings of the file pages.

  h. Delete automatically manage it the swap file and selecting the custom size option to tell Windows to keep the pagefile to a constant size; access to the files is quickier, so Windows has more to resize the pagefile based on the amount of data temporarily stored there. Both size initial and maximum size, enter the recommended size for virtual memory as suggested by Windows (which is usually higher than 5 GB).
  i. Finally click value and then OK three times to close the boxes.

  Mr. Taylor 2:
  If this does not help, Checker (SFC) of file system scan to check if there are any corrupt file system.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Let us know if it helps. If the problem persists, we will be happy to help you.

• Thunderbird does not, application error

  Installed thunderbird - 31.3.0.en - US.win64 - x86_64 in 10 64-bit Windows. When execution to get this when running.
  'thunderbird.exe Application error. The Application was unable to start correctly (0xc000007b). Click OK to close the application. »
  Hope this information helps.

  dwflo

  Download and install the current version of https://www.mozilla.org/en-US/thunderbird/all/
  There is no 64-bit for Windows build Thunderbird, and you have not actually one.

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Satellite 2430-402: 437 Application error during recovery

  Right, I've got a Toshiba Satellite 2430-402 (purchased new) for at least 3 years. I have formated several times before and re-loaded windows back on with no problems until now.

  The problem only started two days ago, when I noticed my CD drive was not recognized. So I decided to format etc, came out the disk Recovery Utility that came only with the computer to install everything, and it will not go beyond 12%. I'm greeted by * Application error 437
  Can not read the file.

  I left really stuck and cannot load anything. I fdisc / formatted /spinrite / kill the hard disk, just in case where there is something nasty on here and can still get nowhere. This is the first time I'm really stuck.

  This could be the engraver of CD or would it be the hard drive or basically the computer is nakered. I inspected the recovery disk, and they are all clean!

  Or is it because I made an update of the bios (you mind, it was weeks ago)

  Everyone please

  Thanks in advance

  Hello

  to my knowledge, the Ghost image files are placed on the Toshiba Recovery CD.
  That's why I studied on the ghosts manufacturing Web site.
  It s Symantec and found this information site:

  HM http://Service1.Symantec.com/support/Ghost.nsf/0/14579a4173691f8988256abf005f4f8f?OpenDocument&SEG= & lg = fr & ct = us

  According to this page this problem seems to be due to starting the computer incorrectly when you use Ghost with GoBack on the computer.
  This problem may also occur when you use a brand or type of CD that works well with your CD - R or CD - RW device. In this case, Windows or DOS might be able to read the information on the CD that other applications cannot.

• Satellite Pro P100 - Application error remote control Toshiba

  I regularly see the pop-up poster titled 'Toshiba Remote Application Error' whenever I start my Satellite Pro P100. I am running Windows XP Media Center Edition SP3.

  My question is - is - does anyone know what can be done to stop this error appear?

  Hello

  Try to remove it from the startup

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• Application error: vmsnap23.exe

  Hello, all.

  This is my first post on this forum, so please be nice!

  Last month, I have an application error that occurs whenever I connect. It seems that the vmsnap23.exe application fails to start, but I don't know what it is (* or * else) so that I can fix it. Any ideas?

  I'm on XP (sp3 since yesterday)

  The event viewer shows this information:

  + Faulting application vmsnap23.exe, version 0.0.0.0, module failed ntdll.dll, version 5.1.2600.5512, address failure 0 x 00011669. +

  I have followed the Microsoft but have not found something useful here. The program is slightly on the C: and not in "program files", or one of the system folders.

  It is a program of Toshiba, part of XP * or * something questionable I can simply delete?

  Thanks for the research.

  See you soon!

  Ken

  Reading a few other forums I found an interesting comment on VMsnap23.exe. Supposedly this process belongs to McAfee VirusScan. McAfee is installed on your laptop?

• application error Userinit.exe & rundll32

  I don't know if anyone has any help on this would be greatly appreciated.

  I am Windows Windows XP Home SP2 on a Satellite edition.
  I think I have a virus that prevents me to connect to my computer properly. Whenever I connect to my computer, it shows the desktop, but nothing else. He then says "userinit.exe application error 0xc00000005 application failed to initialize properly."

  I have to use the Task Manager to find the office. I then give me rundll32 errors with the same error as stated above code. The rundll32 error prevents me from doing anything administrative, so I can not turn off the system restore, I could save a copy of the virus.

  I ran superantispyware and it seems to keep finding the same virus without getting rid of them.
  I really want to do a repair install, I can't find my cd.

  In my opinion these two files are not affected by viruses.
  Maybe your superAntiSpyware it cannot recognize as common system files.

  To ensure that your system is not affected by a virus, you should try to use multiple VRU and spy ware applications;
  I use the software called Antivir. The standard version can be downloaded for free from various Web sites. I recommend also using an Ad-aware and spy boot Search and Destroy. All these tools prevent system of Trojan and Virus attacks. You should use it too.

• Why keep java application error called "on HidePage" script whenever I run, browse and close Firefox?

  Why keep having java script application error (on called HidePage) whenever I run, browse and close Firefox?

  URL of affected sites

  http://

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 6.1; Chrome/5.0.375.99 en-US) AppleWebKit/533.4 (KHTML, like Gecko) Safari/533.4

  Hello Bo.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• Application error

  Hi, I've had Skype for almost a year now, and nothing serious had happened since then. Now, lately, I have acquired Skype application error saying

  "The instruction at 0x7263206f referenced memory at 0x7263206f. The memory could not write. »

  ↑ This appears soon after I started my Skype, I tried to update my Skype, reinstall my Flash Atobe and updated my Windows 7 Ultimate with 'Windows Update'.

  When I try to ignore the "Skype.exe - Application error" and just drag it off my screen, shortly after that Skype is not responding, and then click stop.

  Please help ~ ~: I

  I did and the error in the Application has ceased to appear!

  Thank you very much! ~