HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

Similar Questions

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Computer OFFICE-R4RAE96: AccelerometerSt.exe - Application error

  These days, when I open my laptop, it's show as "the application could not start correctly (0xc000007b). Click ok to close the application. Also the top of the box of dialoge showing AccelerometerSt.exe - Application error

  Hello

  You upgrade your Windows 10 machine? A few other members, including me had the same problem a few weeks back and in my case, I simply reinstalled 3D Driveguard software.

  During installation, it actually says software on my machine is more recent BUT the problem disappeared. Download and run the following software:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71708.exe

  I hope this helps.

• HP 850 G2: AccelerometerSt.exe - Application error

  I have a 850 hp

  After installing quicken 2016 (I previously got quicken 2013) I now get the following error.

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  can you guide me to fix this problem?

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you see an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• HP Pavilion 15-n226tu: AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The program can't start because mfc120u.dll is missing on your computer."

  Hello

  I did an upgrade to Windows Windows 10 8.1 that my computer was not shut down properly.  Now, whenever I start my laptop I get this error message.

  I have a HP Pavilion n226tu 15 Notebook PC model laptop and you ask to help me solve this problem.

  Best regards

  Gaurav Nath

  Hello:

  See if reinstall the software of HP 3D driveguard solves this problem.

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• BlackBerry Smartphones RoxWatchTray9.exe - Application error

  I managed to install (after some tent and using these maps) the Desktop Manager and VZAccess Manager on my laptop for my Storm. However, whenever I turn on my computer, I get the following error:

  RoxWatchTray9.exe - Application error

  The application failed to initialize properly (0xc0000006). Click OK to close the application.

  I click OK and everything seems to work fine (at least what I use), but this error continues to show. There is no option to "do not show this error" so I get it. Is this something I should be concerned? Is there a way to make it stop coming on my system?

  RoxWatchTray is a module of Roxio.

  From my point of view the best way is BB Desktop Software Uninstall and install it again without Roxio.

  If you do not want this try to find a Boot Manager utility (you can google those words) and manage applications that run at startup.

  And remove RoxWatchTray.

  If you have technical knowledge, you can do it manually without start utility. Run regedit, find and and delete RoxWatchTray9.exe registry entries: http://www.doshelp.com/HowToView/Registry_Keys.htm

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.

• Pavilion 15-ab522tx: AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  was shown when I rebooted my computer after installing some updates

  AFTE that I also had an error

  "System AccelerometerSt.exe error: mfc120u.dll is missing.

  Use system restore to restore Windows before the updates took place.

  Choose the point of system that corresponds to the schedule.

  See the thread next where a member has a similar problem. There is a link to the Hp 3D driveguard softpaq, which will provide the missing accelerometer DLL file you need.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/on-start-up-i-get-this-in-a-box-accelerometer-St-exe-System/m-p/4161428#M91513

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• When you use Windows Search error SearchFilterHost.exe - Application error

  When you are using Windows XP (SP3) running Windows Search (4.0), I get the error message:

  SearchFilterHost.exe - Application error

  The instruction at "0x0af609c" referenced memory at "0 x 00000014. The memory could not be "read".

  Click OK to terminate the program

  I do nothing especially when this happens and the disabling or uninstalling this feature is not an option that I and some of the programs that I use it. She repeats every few minutes, but I'm pretty sure it's because the application restarts whenever you "Finish". I also tried to reinstall it but to no avail. Thanks in advance for any help.

  These errors appear when the index database is corrupted, for example during the crash, etc. The solution is, except disabling or removing the search service, reconstruction of the index. Just reinstall will not solve the problem, because that does not remove the corrupted index.

  On XP Pro:

  (1) start 'services.msc' and find Windows Search stop.

  My personal advice: check user accounts all records and make sure that the "Application Data" and "Local Settings" directories have their attribute 'Index summary' unchecked, including all files and subfolders. You can avoid many possible future performance issues.

  2) go to c:\Documents and Settings\All Users\Application Data\Microsoft and delete the entire directory "Search" (or just rename / move elsewhere).

  (3) close the session log. Index will rebuild, it may take some time, depending on the amount of documents, music, etc. you have. So be patient with harddisk increased temporary activity. Normally it works with a low priority.

  On Vista/7 Search index is located in \ProgramData\Microsoft, otherwise,'s done it the same way. Unfortunately, I do not know how to avoid the real alteration. XP seems more inclined to him.