Application error

Similar Questions

• Thunderbird does not, application error

  Installed thunderbird - 31.3.0.en - US.win64 - x86_64 in 10 64-bit Windows. When execution to get this when running.
  'thunderbird.exe Application error. The Application was unable to start correctly (0xc000007b). Click OK to close the application. »
  Hope this information helps.

  dwflo

  Download and install the current version of https://www.mozilla.org/en-US/thunderbird/all/
  There is no 64-bit for Windows build Thunderbird, and you have not actually one.

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Satellite 2430-402: 437 Application error during recovery

  Right, I've got a Toshiba Satellite 2430-402 (purchased new) for at least 3 years. I have formated several times before and re-loaded windows back on with no problems until now.

  The problem only started two days ago, when I noticed my CD drive was not recognized. So I decided to format etc, came out the disk Recovery Utility that came only with the computer to install everything, and it will not go beyond 12%. I'm greeted by * Application error 437
  Can not read the file.

  I left really stuck and cannot load anything. I fdisc / formatted /spinrite / kill the hard disk, just in case where there is something nasty on here and can still get nowhere. This is the first time I'm really stuck.

  This could be the engraver of CD or would it be the hard drive or basically the computer is nakered. I inspected the recovery disk, and they are all clean!

  Or is it because I made an update of the bios (you mind, it was weeks ago)

  Everyone please

  Thanks in advance

  Hello

  to my knowledge, the Ghost image files are placed on the Toshiba Recovery CD.
  That's why I studied on the ghosts manufacturing Web site.
  It s Symantec and found this information site:

  HM http://Service1.Symantec.com/support/Ghost.nsf/0/14579a4173691f8988256abf005f4f8f?OpenDocument&SEG= & lg = fr & ct = us

  According to this page this problem seems to be due to starting the computer incorrectly when you use Ghost with GoBack on the computer.
  This problem may also occur when you use a brand or type of CD that works well with your CD - R or CD - RW device. In this case, Windows or DOS might be able to read the information on the CD that other applications cannot.

• Satellite Pro P100 - Application error remote control Toshiba

  I regularly see the pop-up poster titled 'Toshiba Remote Application Error' whenever I start my Satellite Pro P100. I am running Windows XP Media Center Edition SP3.

  My question is - is - does anyone know what can be done to stop this error appear?

  Hello

  Try to remove it from the startup

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• Application error: vmsnap23.exe

  Hello, all.

  This is my first post on this forum, so please be nice!

  Last month, I have an application error that occurs whenever I connect. It seems that the vmsnap23.exe application fails to start, but I don't know what it is (* or * else) so that I can fix it. Any ideas?

  I'm on XP (sp3 since yesterday)

  The event viewer shows this information:

  + Faulting application vmsnap23.exe, version 0.0.0.0, module failed ntdll.dll, version 5.1.2600.5512, address failure 0 x 00011669. +

  I have followed the Microsoft but have not found something useful here. The program is slightly on the C: and not in "program files", or one of the system folders.

  It is a program of Toshiba, part of XP * or * something questionable I can simply delete?

  Thanks for the research.

  See you soon!

  Ken

  Reading a few other forums I found an interesting comment on VMsnap23.exe. Supposedly this process belongs to McAfee VirusScan. McAfee is installed on your laptop?

• application error Userinit.exe & rundll32

  I don't know if anyone has any help on this would be greatly appreciated.

  I am Windows Windows XP Home SP2 on a Satellite edition.
  I think I have a virus that prevents me to connect to my computer properly. Whenever I connect to my computer, it shows the desktop, but nothing else. He then says "userinit.exe application error 0xc00000005 application failed to initialize properly."

  I have to use the Task Manager to find the office. I then give me rundll32 errors with the same error as stated above code. The rundll32 error prevents me from doing anything administrative, so I can not turn off the system restore, I could save a copy of the virus.

  I ran superantispyware and it seems to keep finding the same virus without getting rid of them.
  I really want to do a repair install, I can't find my cd.

  In my opinion these two files are not affected by viruses.
  Maybe your superAntiSpyware it cannot recognize as common system files.

  To ensure that your system is not affected by a virus, you should try to use multiple VRU and spy ware applications;
  I use the software called Antivir. The standard version can be downloaded for free from various Web sites. I recommend also using an Ad-aware and spy boot Search and Destroy. All these tools prevent system of Trojan and Virus attacks. You should use it too.

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Why keep java application error called "on HidePage" script whenever I run, browse and close Firefox?

  Why keep having java script application error (on called HidePage) whenever I run, browse and close Firefox?

  URL of affected sites

  http://

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 6.1; Chrome/5.0.375.99 en-US) AppleWebKit/533.4 (KHTML, like Gecko) Safari/533.4

  Hello Bo.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• What does it mean when I connect to Facebook and a pop-up out saying ' [JavaScript Application] error: jQuery ("#fb_menu_account", document) .attr ("href") is not defined?

  What does it mean when I connect to Facebook and a pop-up out saying ' [JavaScript Application] error: jQuery ("#fb_menu_account", document) .attr ("href") is not defined? I would like to know what I can do to solve this problem. The site will end up running slow. I tried to clear cookies and cache, but it does not work.

  URL of affected sites

  http://www.Facebook.com

  Fact is always happen in Mode without failure of Firefox. See questions to troubleshoot Firefox in Safe Mode.
  If so, it is probably caused by an add-on.

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.

• Qosmio F20 - 437 Application error

  Hello

  I use the recovery disk to restore my Qosmio F20 to factory settings, an application error 437 a popoed upward during the reimageing process.
  I remember upgrading the RAM, and I don't have the original with me.

  Any help will be appreciated.
  Thank you.

  Hello

  Autour Googling, I found thisarticle.

  So I ask what may be the solution to your problem. May be corrupt drive recovery? Can you see scratches or stains on it?