Error code: WerFault.exe - Application error

Similar Questions

• WerFault.exe - Application error, cannot open all the files.

  Original title: any file does not open

  I am not able to open files, it says

  WerFault.exe - Application error

  The instruction at ox74d7b89a referenced memory at 0x00000008. the memory could not be read.

  Click on ok to terminate the program.

  Hi Dev,

  Were there any hardware or software changes made on the PC before this problem?

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  This error can be caused by bad memory or a file system corruption.

  Kindly, follow these methods and check if that helps.

  Method 1:
  Step 1:

  Run the Memory Diagnostic tool.

  Follow the steps to run the Memory Diagnostic tool:
  a.Press Windows key + W on the keyboard and type 'memory' without the quotes.
  b. click on "diagnose your computer memory problems".
  c. Select the recommended option to run the tool.

  Step 2:
  Try to increase the virtual memory and check the issue.

  a. press the Windows key + X, choose Control Panel.
  b. click system and security , and then click on System.

  c. click on Advanced system settings in the right panel.

  d. click on the Advanced tab in the system properties box.

  e. click settings in the Performance section.

  f. click on the Advanced tab in the dialog box.

  g. click on the change button.

  Now, in the virtual memory dialog box, you can change the settings of the file pages.

  h. Delete automatically manage it the swap file and selecting the custom size option to tell Windows to keep the pagefile to a constant size; access to the files is quickier, so Windows has more to resize the pagefile based on the amount of data temporarily stored there. Both size initial and maximum size, enter the recommended size for virtual memory as suggested by Windows (which is usually higher than 5 GB).
  i. Finally click value and then OK three times to close the boxes.

  Mr. Taylor 2:
  If this does not help, Checker (SFC) of file system scan to check if there are any corrupt file system.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Let us know if it helps. If the problem persists, we will be happy to help you.

• Werfault.exe error message

  I get this message when you try to open the Panel and windows programs. such as the backup and restore: Werfault.exe - Application error - error exception invalid statement - an attempt was made to execute an illegal instruction. (0xc000001d) occurred in the application at location 0x7730b5f1. I can't use the execution of orders, so, how do I fix? It all started when this woman came and put his camera card in my printer and print a photo she had taken. Please help, because I'm considering a format, which I don't want to do unless absolutely necessary. Thanks for your help.

  Hi Eburner,

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  You can access here Windows error reporting settings: Control Panel > system and Maintenance > Problem Reports and Solutions > change settings > advanced settings

  Method1

  I suggest that you stop and restart the Windows error reporting service on the computer and check later if the problem persists.

  (a) click Start menu and type services.msc in the search box and press ENTER.

  (b) in the service list, navigate to the Windows error reporting service.

  (c) right-click and click Properties now to stop the service and restart it.

  (d) click on apply and OK

  Check if the problem persists.

  Method 2

  If the previous step fails then I suggest that you perform the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• werfault.exe, windows does not

  I met some problems recently with the performance of my laptop, virtually overnight. Explorer Windows and internet explore become often does respond not by me simply doing whatever it is in a window and it causes other programs such as Windows Media Player to struggle to work, among other programs (MSN messenger, etc.). I tried to send an error report to get a WerFault.exe - application window error, mention an instruction to memory x.eferenced 0 x 0... Required data has not been placed in memory due to an error of e/s to 0xc. Does anyone have solutions to this problem? Any help is appreciated!

  My laptop set repair today, it seems it there's only a problem with the hard drive and therefore will have to fix. Thanks for the assistance provided in any case!

• During the game Dragon Age: error code 0xc0000006 autorun.exe application error, click ok to finish

  Former title: error code (0xc0000006)

  Every time I try to play dragon age or try to open my registry fixing software error that happens with the autorun.exe application failure code click ok to finish I really want to play my game and do a scan but I'm unable to do so.  I tried to fix it by l ' completely off I tried to start the bare minimum on start up and I even uninstalled most of the programs that I put on the computer but they still does not work properly. Now my usual game even now install from the disc.  I scanned for viruses and malware, so I know that these two things are not the issue.  Please help me I don't know what else to try to solve the problem that I encounter.

  Thank you for your time.

  Hello
   
   
  1. What registry fixing software do you use?
  
  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  Method 2.
  Best thing you can do is to perform a system restore just before where the problem occurred.
  I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 WerFault.exe & wermgr.exe Application error

  After recently reinstall Win7 Windows Vista (which has been installed on Windows XP) on my computer began spewing WerFault.exe and wermgr.exe application errors

  I tried everything I installed AVG and scanned it returned without flaws but it becomes serious when I try to download or use automatic updates it Kicks me out or does not apply the changes I made

  "I tried Safe Mode and it does not work and when I ask new programs to install as Windows fixit he returns with an error.

  Extended attributes are incompatible"I'm about to give up with the computer if there is anything I can do please reply with MI awnser about to stop trying

  Hi Alex,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get an error message.

  This could be due to corruption of system files.

  Try the methods.

  Method 1:

  I suggest you perform a Scan SFC and check if it helps.

  Check the following link below.
  https://support.Microsoft.com/en-us/KB/929833

  Note: Although SFC analysis I recommend that you ensure that there are no applications or programs running on the background.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a security tool free that provides analysis on demand and helps remove viruses, spyware and other malicious software. It works with your current Antivirus software. See the link to download and run the Analyzer:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• "Explorer.exe - application error" code 0x032d0fef

  Hello

  I have a problem with my windows 7 professional service pack preload. Sometimes I open a windows folder displays an error message "explore has stopped working... and then he retrieve as Explorer begins with success...» Sometimes give a warning entitled... "Explorer.exe - application error.

  and contains "the instruction at 0x032d0fef referenced memory at 0x032d0fef. The memory could not be written. Click ok to complete the program." While what happens sometimes, I will shut down my system.

  Can anyone give a solution for this?

  The module that seems to be the question is the UninstallExplorer32.dll:

  Fault Module name: UninstallExplorer32.dll_unloaded

  The UninstallExplorer32.dll seems to be a component of IObit Uninstaller:

  http://SystemExplorer.NET/file-database/file/uninstallexplorer32-DLL/21192656

  Can you try to update or, if necessary, uninstall IObit Uninstaller.

• WerFault.exe continues to use all CPU, despite Microsoft Error Reporting turned off.

  Although even I turned off the Microsoft error (running Vista Home Premium) report continues to use all CPU, I read a lot of geek and tech stuff after googling the problem and thought that I had found the answer.  I uninstalled a few programs that I did not, and he was glad that the problem has disappeared.  After one episode a week, he started to reproduce. It could be something else to do, but I can't locate the forum who suggested to uninstall programs.   Even when I open Explorer and Windows Task Manager just. WerFault.exe executes two threads.  All the answers?  I hope of course!  Thank you

  When WerFault.exe turns that means that other tools have crashed. Reactivate the WER service and check the item 'Problem and Solution' applications that crashed the last days.
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Svchost.exe application error, host process for Windows Services has stopped working

  Original title: Svchost.exe application error [windows loses focus]

  Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

  Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc00000fd
  Offset: 0x0000000000018e3d
  ID of the process failed: 0x81c
  Start time of application vulnerabilities: 0x01cd7970b1953fa0
  The failing application path: C:\Windows\system32\svchost.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: efb97cea-e563-11e1-a232-002655497401
  The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
  Thank you for your time.

  Hello

  1. when exactly do you get this error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  Step 1:

  Try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Whenever the browser opens, I get an error saying: "Explorer.exe" application crash

  Original title: I get an error saying: "Explorer.exe" application crash

  Whenever it opens explorer, I get the error below and it remains my explore

  I get the error message is the following:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: StackHash_b61d
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c0000374
  Exception offset: 000b06fc
  OS version: 6.0.6002.2.2.0.256.1
  Locale ID: 2057
  Additional information 1: b61d
  More information 2: 167a8c47623c2496d77676b17616bd5b
  3 more information: ae0a
  Additional information 4: 8785af56cd014fa3319b3e04d072db96

  Please let me know how I can solve this problem.

  Thank you

  Sam

  Hi Sam,

  Do you remember what makes any agreement, changes this question?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• I get an error saying: "Explorer.exe" application crash

  original title: APPCRASH Explorer.EXE

  About 1 week from today, I tried to open my control panel and folder on my laptop and continue to receive the error shown below and it restarts Explorer.EXE

  I have Window Vista (Home Edition) 32-bit Basic on my PC.

  The message I get every time:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Explorer.EXE
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c0000005
  Exception offset: 00048822
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 1033
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  I searched the similar problems here and checked to see if none of the suggestions work, and they did not.

  Could you please tell me why my PC do all this suddenly and does so whenever I try to access My Documents, Control Panel, etc..

  Please help me with this so I don't have to wipe my hard drive and reinstall Windows Vista!

  Thank you

  Michael L.

  Problem has been resolved. A purchase price comparing the toolbar got installed on my computer without my knowledge.

  I ended up having to change my registry to remove it.

  Now I can open all my files and the control panel etc. and receive no APPCRASH.

  The program was Dealio Toolbar

  Michael L.

• What is werfault.exe error? How to solve window 8?

  Separated from this thread.

  Original title: what is werfault.exe error? How to solve window 8? its bad thing for windows 8? / Please solve it quickly

  What is werfault.exe error? How to solve window 8? its bad thing for the user to window 8?

  Hello

  I will help you certainly with the same. However, we need a few details to better understand the cause of the problem.

  1. Once you get this error message?

  2 did you recently do changes on your computer, before the show?

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  You can access Windows here error report settings:

  1. press Windows + X, choose Panel.

  2. choose system and Maintenance , go to Problem Reports and Solutions.

  3. Select change settings , and then choose avancΘs.

  4 try to disable it temporarily and see if this will fix the issue.

  As a temporary solution you can disable the error reporting service:

  (a) Press Win + R, type services.msc and press ENTER.

  (b) find Windows Error Reporting service in the services list.

  (c) make a right click on it, and then click Properties.

  (d) open the "Startup Type" list and select "Disabled" press OK.

  Then check and see if you still get the error werfault.exe on opening the programs.

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• How to fix the error on Windows 8 werfault.exe.

  Separated from this thread.

  It's fine saying that removing a program will cure the problem but what happens if it's a laptop acer who does not have a theatre key installed?

  He seems to have an impact on google chrome, Internet Explorer, all the office programs and Dropbox, iv all really tried so far and making everything extremely slow.

  IV done all updates to day and stupid as it sounds active it working again. Under start on the Task Manager, nearly every program has 2 or 3 or more Windows Error Reporting.

  Everything seems to indicate a windows problem, but how to solve?

  Hello

  To quote, Naman R, Microsoft:

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  You can access here Windows error reporting settings: Control Panel >system and Maintenance > Problem Reports and Solutions > change settings > advanced settings

  Try to disable it temporarily and see if this will fix the problem.

  As a temporary solution you can disable the error reporting service: Press Win + R, type services.msc find Windows Error Reporting service in the services list, make a right click on it-> click Properties-> open list "Startup type" and select "Disabled"--> press OK.

  Then check and see if you still get the error werfault.exe on opening the programs.

  Make sure that all drivers are up-to-date.  Use Device Manager to update the drivers but I also suggest you go to the manufacturer's Web site to ensure that updates are installed.

  Try to run the following tests, and then check if the problem persists:

  Troubleshooting component Store / Filesystem Corruption

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-system/troubleshooting-component-store-system-files/8acbd614-678d-42B9-859c-56d3e6f8342a

  Question: have you considered updating to Windows 8.1?

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.