"Application has stopped working" - in windows 7 double started with windows server 2003.

Similar Questions

• Service using SRVANY. EXE has stopped working on Windows Server 2008 R2

  I have a Windows Server 2008 R2 (64-bit) server that runs as a service for several years a virtual machine VMware Player.  I used the SRVANY old Resource Kit tool. EXE to configure the Windows 8.1 virtual machine to load and run in the background.  This config worked without problem for years and through at least an upgrade of the virtual machine operating system.

  02/06/16, I upgraded VMware Player to version 12 and later upgraded the virtual machine OS Windows 8.1 to Windows 10.  After that, the service that I created using INSTSRV and SRVANY is more years launches the VM.  The service seems to start with success (no errors), but the virtual machine does not start.  I don't see a new instance of the vmplayer.exe process when I start or restart the service.

  Other changes on the Windows Server 2008 R2 server since the last SRVANY config worked were last month security patches.  I have a hard time to believe that upgrading the guest OS could have no relevance here.

  To troubleshoot, I tried vmplayer.exe followed of the file name of the VMX virtual machine from a launch command line.  This works.  However, if I try to run the same exact command from a CMD, launches of VMware Player interface file, but I get a "file not found" dialog box, and the virtual machine does not start.

  I also tried reinstalling VMware Player 12 and temporarily return to VMware Player 6.  None worked.

  Ideas?

  Subscribed to the thread and ping relevant resources.  Good luck

• Remote Desktop has stopped working on windows server 2008 r2

  My windows Server 2008 are no longer accessible through Office remotely. System was fine until yesterday, now, it does not accept rdp connections.

  Hi Doug,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums for further assistance:

  TechNet Forums (Services Terminal Server) remote desktop services

• MFC Application has stopped working. (Windows 2008 R2, Enterprise Edition)

  Hello

  I am getting below error while opening one of our application.

  

  Here is the error log...

  The failing application name: BulkLoader.exe, version: 7.2.5278.0, time stamp: 0x562d92cf
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.19018, time stamp: 0x5609fed4
  Exception code: 0xe0434352
  Offset: 0x0000c42d
  ID of the process failed: 0x1f60
  Start time of application vulnerabilities: 0x01d11148f8bc7969
  The failing application path: C:\Program Files (x 86) \Allscripts Sunrise\Clinical Manager Client\7.2.5278.0\BulkLoader.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 3b0ca2bf-7d3c-11e5-a5cc-0050568608c1

  Please help...

  Thank you

  -Siva

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Catalyst Control Centre: host application has stopped working Windows xp prefessional

  Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.

  Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.

• My wordpad windows application has stopped working! How to operate?

  My wordpad windows application has stopped working! How to operate?

  Hello

  Thank you very much for your answer and I appreciate!

  I had the right solution and what I did, I uninstall the doPdf 7 then try to install another driver and now it works... all my Word files are now easy converts to PDF!

  in any case, what is the meaning of the PDF? What is PDF-Protected data file? Am I wrong?

  See you soon,.

  Mirasol

• LUpdate Application has stopped working Windows Vista starts.

  Original title: LUpdate application error

  At the start of my Vista laptop it comes up with an error that says that lupdate Application has stopped working.  How can I get that back to work?

  Thank you

  Hi Revbob,

  1 did you recent hardware or changes to the software of the system?

  2. are you able to boot into normal mode after receiving the error message?

  If you can boot into normal mode, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Try to install a CD "the Start-Stop software installation", but whenever I try, I get the following. Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close t he program and notify you if a solution is available. I sent the company and the school several times and have not yet received a response, maybe someone out there could help. Thank you!

  Ok.

  See if they have a patch for it.

  If this isn't the case, you may need to shopping for a similar program.

  Or repost in the Forum of programs on the link I gave you; they can learn more on this subject here.

  See you soon. Mick Murphy - Microsoft partner

• How can I fix windows 7 Catalyst control center host application has stopped working

  I received the error: Catalyst Control Centre: host application has stopped working. I uninstalled the Device Manager Catalyst Control Center and restarted - after uninstall and reboot I got the same message saying: Catalyst Control Center: the host application has stopped working - I also checked for driver updates in the Device Manager and the device manager says my driver updates are up-to-date.

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!

• Cannot print the financial dashboard on message of 64 bit windows 7 host computer driver print for 32 bit applications has stopped working

  Original title: Windows 7 print driver host for 32 bit applications has stopped working

  Hello

  In my company, we have a Windows 7 (Professional 64 - bit) computer with installed on financial Edge(32-bit). We have been able to print from this fine machine, but recently we changed a printer of Conan for a Dell 2150cn Color Laser Printer (64-bit driver). Now, when we try to print from financial dashboard, we get the following error:
  Host of the print driver for 32 bit applications has stopped working

  Problem event name: APPCRASH

  Application name: splwow64.exe

  The printer is not a network printer, it is physically connected to the machine. In addition, it seems to print very well, if we are not trying to print from financial dashboard. Unfortunitly, once we try to print from financial dashboard, we cannot print from something else. In addition, financial dashboard can sometimes print (this is rare). I uninstalled and reinstalled, using the drivers that came with the CD (tried to download through the Dell website, but Windows seems to hate this driver)

  Hi IToccrra,

  1. the computer is in a domain environment?

  2. who is the provider of the financial advantage program you're talking about?

  Method 1: Try to print in clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Method 2: Run the printer Troubleshooter

  See the following site:

  Open the printer Troubleshooter

  http://windows.microsoft.com/en-us/windows7/Open-the-Printer-troubleshooter.

  Method 3: update the printer driver

  See the following site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  The details of the error are telling us that the accident occurred when the host of the 32-bit printer driver tries to use the printer. Apparently, you are trying to print from is a 32-bit program, and is not able to use 64-bit print drivers correctly. I would also ask that you contact the vendor of the software (from when you try to print) to check the issue.

• LCDRotate64 Application has stopped working - I have windows vista

  Hello

  I received an error message that my LCDRotate 64 application has stopped working.

  I did a full scan with norton and malware.

  I checked the report of problems and he said that the LCDRotate 64 application crashed.  One of the options was to consult a copy of the version, but it could be a risk if there is a virus.

  I don't know what to do?  You happen to know how to solve this problem?

  Thank you!

  Hello

  See if that helps.

  But don't use "Fix my PC" links to 3 third-party sites

  It is apparent from information ti be a HP problem

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/what-is-LCDRotate64-application/TD-p/1572595

  It says it's a problem of HP.

  http://www.fixdllexe.com/LCDRotate64.exe-447168.html

  See you soon.

• On startup, I get the messages that applications have stopped working. One of them is (2nd message) IE3SH application has stopped working. How can I fix it?

  Start-up applications to receive messages from windows that have stopped working. One of them is IE3SH application has stopped working. How can I fix it?

  Hi 9gonz9,

  Welcome to the Microsoft Answers site!

  You get this error message when you start the desktop computer?

  You can check if the complete startup items are checked in the msconfig utility.

  1. open System Configuration by clicking Start , clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click the Startup tab and check if all the items are archived there.

  You can also run a bag of security for your computer and check if this solves the problem.

  http://www.Microsoft.com/Security_Essentials/

  If the problem persists, turn the computer in clean boot and check if all the background program is causing this error message. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start the office see if you get the error message. If not then follow the divide and conquer method mentioned in the article below to know which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L500 - DMIcheck application has stopped working

  Some of my drivers won't install givin message "DMIcheck application has stopped working" or similar for pInfo application...

  Same installation of 64 bit Windows 7 on another laptop didn't have problems like that.

  How to solve this?

  model laptop is L500 (short model No. PLJSHE)

  Hey,.

  To me that sounds like that the DMI information is missing, and if you get this error message...
  You use the Toshiba drivers directly?

  Usually the DMI information is missing, if the motherboard was exchanged and technicians forgot to re - write this information.
  In this case contact the guy again and they will do that for you! :)

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.

• Satellite L300-1AQ - Bluetooth tray application has stopped working

  When I put my laptop it comes up with an error that says:

  * bluetooth tray application has stopped working *.

  A problem has caused the problem to stop working correctly.
  Windows will close the program and notify you if a solution is available.

  Anyone who has a solution?

  The laptop is a Satellite L300 - 1AQ
  Didn't it monthly!

  Please help, thanks

  XX

  Hello

  Have you tried to reinstall the battery Toshiba BT?

  Usually, this will help you get rid of this error message.
  Here you can download the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  First remove the old BT of the system software and after restarting again install the BT downloaded from the Toshiba BT page.

  Good bye