Application in VSOM report (using the Application layer in point 6.1)

Similar Questions

• error reported from the transport layer and the error description was impossible to extract

  Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
  error reported from the transport layer and the error description could not be found! the message has been lost
  Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
  connections but is not working okay I tried microsoft fix
  Thank you john

  Hi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted

  missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.
  after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXED
  NO MORE ANNOYING MESSAGE

• When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind

  When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind it does not move. I did this project of class before and it worked fine so I'm not sure if I have something started or... Any thoughts?

  I thought about it. That's all just stupid on my part and a bit of frustration because photoshop is my sworn enemy of then adobe added in. Thanks tho!

• How to create the report using the procedure.

  Hi all

  I want to create the report in the apex. But I don't have a sql code. I have a single procedure. Is it possible to create the report using this procedure in the apex.

  CREATE OR REPLACE PROCEDURE headcsv_prc2

  AS

  CURSOR cr_header

  IS

  SELECT ood.organization_code, fm.formula_no AS "FORMULA_NAME."

  FM.formula_vers AS "FORMULA_VERSION."

  FM.formula_desc1 AS "FORMULA_DESC."

  DECODE (fm.formula_status,

  100, 'new ',.

  400, "approved for use in the laboratory."

  700, "allow the general."

  800, "We Hold."

  900, "frozen."

  1000, "obsolete/archived.

  ) AS "FORMULA_STATUS."

  DECODE (fd.line_type, '1', msib.segment1).

  DECODE (fd.line_type, '-1', msib.segment1 ') ingrediant.

  DECODE (fd.line_type, '2', msib.segment1) AS "BY_PRODUCT."

  DECODE (by_product_type,

  "W', 'waste."

  "R',"rework. "

  "Y', 'Yield."

  The of ', 'Sample. "

  NULL VALUE

  ) AS "BY_PRODUCT_TYPE".

  Of org_organization_definitions ood,.

  fm_form_mst fm,

  fm_matl_dtl fd,

  mtl_system_items_b msib

  WHERE ood.organization_id = fm.owner_organization_id

  AND fm.owner_organization_id = msib.organization_id

  AND msib.organization_id = fd.organization_id

  AND fd.organization_id = ood.organization_id

  AND fm.formula_id = fd.formula_id

  AND msib.inventory_item_id = fd.inventory_item_id

  - and fm. FORMULA_NO like '% THE % '.

  AND fd.line_type IN ('1 ', ' 2', '-1' ")

  Ood.organization_code GROUP,

  FM.formula_no,

  FM.formula_vers,

  FM.formula_desc1,

  FM.formula_status,

  FD.line_type,

  MSIB. Segment1,

  by_product_type

  ORDER BY fm.formula_no, fm.formula_vers;

  BEGIN

  Dbms_output.put_line (INITCAP ('the ORGANIZATION CODE')

  || ','

  || INITCAP ('NAME FORMULA')

  || ','

  || INITCAP ('FORMULA VERSION')

  || ','

  || INITCAP ('FORMULA DESC')

  || ','

  || INITCAP ('FORMULA STATUS')

  || ','

  || INITCAP ('PRODUCT')

  || ','

  || INITCAP ('INGREDIANT")

  || ','

  || INITCAP ("PER PRODUCT")

  || ','

  || INITCAP ('PER TYPE OF PRODUCT")

  );

  FOR ch IN cr_header

  LOOP

  Dbms_output.put_line (ch.organization_code

  || ','

  || ch.formula_name

  || ','

  || ch.formula_version

  || ','

  || '"'

  || ch.formula_desc

  || '"'

  || ','

  || ch.formula_status

  || ','

  || ch. Product

  || ','

  || ch.ingrediant

  || ','

  || ch.by_product

  || ','

  || ch.by_product_type

  );

  END LOOP;

  EXCEPTION

  WHILE OTHERS

  THEN

  Dbms_output.put_line (' No error: ' |) SQLCODE. "Error Msg: ' '.

  || SQLERRM

  );

  END;

  EXEC HeadCSV_Prc2

  
  

  
  

  Thank you

  Rambeau

  Hi Christian,

  In addition to the fact that the Oracle database has an internal Java engine and it would be possible for Apex call a Java stored procedure, the Apex really has nothing to do with Java. To create a report, you discovered, you specify a SQL query. In certain circumstances, you can embed a query in a PL/SQL function, but the incorporation of an arbitrary Java application and waiting for it to be called from Apex for a kind of security is there with the fairies.

  I recommend you research the Apex and then enter your so-called "higher authorities" how things work.

  Concerning

  André

• Creation of XML report using the PL/SQL stored procedure

  Hi friends,

  I'm working on a report xml with the xml source as a PL/SQL stored procedure.

  I mean the fiscal year indicated in the following link to understand the process:

  http://orclapp.blogspot.com/2012/02/developing-xml-publisher-report-using.html

  In the example shown in the link above, I did not understand the following:

  (1) in the following procedure, setting out "retcode" is not used at all.

  What is the importance of this parameter.

  REPORT PROCEDURE (errbuf OUT VARCHAR2, retcode OUT VARCHAR2, p_product_id in NUMBERS)

  (2) after the xml data are prepared and updates 'l_result' variable Clob, what follows

  Loop is executed. I am not able to understand why the following loop is required.

  LOOP

  EXIT WHEN l_length = l_retrieved;

  IF (l_length - l_retrieved) < 32000

  THEN

  SELECT SUBSTR (l_result, l_retrieved + 1) IN l_xmlstr FROM DUAL;

  l_retrieved: = l_length;

  fnd_file.put_line (fnd_file.output, l_xmlstr);

  ON THE OTHER

  SELECT SUBSTR (l_result, l_retrieved + 1, l_offset)

  IN l_xmlstr

  FROM DUAL;

  l_retrieved: = l_retrieved + l_offset.

  fnd_file.put_line (fnd_file.output, l_xmlstr);

  END IF;

  END LOOP;

  (3) in the example it is not explained how the concurrent program gets the xml data?

  I guess that it is written to a file by using the following line of code:

  fnd_file.put_line (fnd_file.output, l_xmlstr);

  I would be grateful if someone can shed some light in my questions above so that I can well understand the process.

  Thanks and greetings

  Hawker

  Hi 32000 in the code is a 'safe' than 32767 available max mesh, loops is intended to get around the entire thing into pieces that can be managed within the limits of the data type.

  BTW; If you are in the following Oracle e-business, you can also use the Oracle reports very simply to create the XML output.

  If you have reports developer all you need to do is put raw sql (create XML without any "Fireworks") in the SQL report and then set reporting in XML format in the definition of program in Oracle e-business.

  Best regards

  Robert.

• SQLDEV 4.1: Release of report using the dbms_output is all wrapped up in a single line as if new_line is not interpreted

  I develop a report that uses the dbms_output to output messages. However what type of report is set to "PLSQL DBMS Output". the output is all wrapped up in a single line, as if the new lines are not interpreted. If I put it as a "Script", I don't get anything.

  Is there a magic definition that I'm missing? My pl/sql block has dbms_output.enable and several dbms_output.put_line calls and it's on Windows 7 64 bit with Java 1.7.

  Thanks in advance

  the dbms_output is rendered in HTML format in this Panel. So if you want a new line, add a '
  "to your channel.

  HTML support is pretty basic as the HTML3 spec.

  Here is an example

  http://www.thatjeffsmith.com/archive/2012/04/substitution-variables-HTML-reports-in-SQL-Developer/

• Include the attribute custom report using the disc

  I'm to customize a script provided by Alan Renouf in his PowerGUI Powerpack.  The script I'm customization in the Powerpack is named 'VM disk sizes.

  His screenplay does everything we need from a point of view of output except that we can also include a custom attribute (Custom Field) VM as well as the information of the disk space.  I have included the below custom script, please note that this is a script/PowerGUI PowerPack we customize but was initially written and provided by Alan Renouf and all credit for this original work must be given to Alan.

  I have included our custom below script and have "in bold Red" line in the script that does not work:

  $AllVMs = get-View - ViewType VirtualMachine. Where {-not $_.} Config.Template}
  $SortedVMs = $AllVMs | Select *, @{N = "NumDisks"; E={@($_. Guest.Disk.Length)}} | Sort-Object-down NumDisks
  {ForEach ($VM to $SortedVMs)
  $Details = new-object PSObject
  $Details | Add-Member-Name name-value $VM.name - Membertype NoteProperty
  $Details | Add-Member - MemberType NoteProperty-name CustomFields-value (($VM.)) CustomFields | %{"$($_. Key) = $($_.) (Value)'}) - join ',')
  $DiskNum = 0
  Foreach ($disk in $VM. Guest.Disk) {}
  $Details | Add-Member-name "drive$ ($DiskNum) path"-MemberType NoteProperty-value $Disk.DiskPath
  $Details | Add-Member-Name "Disk$ ($DiskNum) Capacity (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) Capacity / 1 MB))
  $Details | Add-Member-Name "Disk$ ($DiskNum) FreeSpace (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) FreeSpace / 1 MB))
  $DiskNum ++
  } # end foreach nested
  $Details.PSTypeNames.Clear)
  $Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VMGuestDisks) '
  $Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VM) '
  $Details
  } # end foreach

  When you use the Get view as seen on the first line of the script, it appears the CustomField information not available in the generated view.  How to develop the view to include CustomFields/CustomAttributes for each virtual computer in our environment and then report on their subject?

  Please let me know if I did a poor job explaining the scenario and what I'm after here.  Any help is greatly appreciated!

  Hello, jSun311-

  Yes, you are right - there is no such thing as the "CustomFields" property on a managed object VirtualMachine .  You can always get the names and the corresponding values of the custom fields, you just have a little.  For example, you could change the line to:

  ...## make a comma-separated string that holds the custom field key/value pairs, like "cust0 = myValue0,cust1 = myDateInfo"$Details | Add-Member -MemberType NoteProperty -Name CustomFields -Value (($VM.Value | %{$oCustFieldStrValue = $_; "{0} = {1}" -f ($VM.AvailableField | ?{$_.Key -eq $oCustFieldStrValue.Key}).Name, $oCustFieldStrValue.Value}) -join ",")...
  

  and you should be happy as a clam.

  BTW, this call Get-view on your first line could be optimized a little using the - Filter parameter, like:

  $AllVMs = Get-View -ViewType VirtualMachine -Filter @{"Config.Template" = "false"}
  

  Pretty minimal in this case, but can be very useful in other scenarios of Get-View.  And, you may want to retrieve only the properties of the managed VirtualMachine object that you plan to use, so that the memory usage is reduced to the minimum, speed is optimized, etc. (do you this by using the - Get-mode property param).

  Anyway, how does do for you?

• How to use the camera layer.

  Hello, I use Adobe AE CS4 in my 32-bit of Windows XP computer.             I downloaded a few youtube tutorial and followed very closely and I have a project to make what is 95% complete. I'm stuck at the tool camera layer, I want the camera to follow every word of the philosophy that I have inserted in the project. Could someone tell me how, I did with the background, light, text, now the last would be the camera layer. How can I achieve that. Any help is greatly welcomed. Thank you.

  Just set keyframes for the camera and move it. You can set the values in the timeline panel or use different views to adjust the position of the camera. Please search the help files in the animation of a camera. We cannot give you much better than advice without knowing what tutorial you follow.

• Problems using the mask layer and B &amp; W in filter/fit option.

  I used to use the layer mask + black and white filter/adjustment. + using the eraser to do some simple setting highlight, but then after the first photo that I did today, it stopped working.

  I was wondering if anyone knew how to solve this problem, maybe I've touched a keyboard shortcut / cmnd that off, he'll do layers and layers of filter, turn the photo b & w, but when I go to delete, it does nothing.

  Thanks in advance!

  Eric Fields.

  Post edited by: EricRFields

  It would be easier if you use the Brush tool to paint on the layer mask.

  Paint with black to reveal the color and white to hide the color of the layer below.

  You can use the X key to move from one black and white as foreground color in the Toolbox.

  

• Request report - use the function that returns the cursor

  My requirement is to create a report, which the source will be a function that returns a cursor (the type of cursor is ref cursor).
  How this can be done?
  
  for example. function my_func (pol_no in number) return cur_type < ref cursor >
  
  Edited by: viveks on October 27, 2009 10:09

  Better to look at a function that returns a query, or use a hose to treat your cursor returned, because the APEX at the moment can NOT handle the sliders in reports...

  Thank you

  Tony Miller
  Webster, TX

• My layer mask is using the entire layer as a mask instead of the object

  I have the letters that I've converted to outlines and are grouped.  I need a picture to be obscured by these letters.  I created a layer with the letters layer mask, but on the collapse of the group, all the individual letters are masks, but the Group layer mask image icon is removed all that actually hide the entire layer.

  If I separate the letters and then make a layer mask, a letter is a mask, the rest are ignored.

  What I'm doing wrong here?

  Nicola,

  To have the letter several forms works as a mask, select all and opposition > compound path > make. That's all you need (no need of a mask layer or anything else).

• How to choose the right layer just pointing?

  I have a file with many layers (a composition with lots of different hidden items and comped together) and used the V tool by pressing Ctrl to select the appropriate layer.

  After organizing my layers into groups, which no longer works.  Pointing takes me for the Group containing the layer I want, and I still have to understand that, in the old-fashioned way (toggle visibility on all of them until this I find the right one).  With nested groups, it is even worse, and the point function is totally broken.

  I noticed that point function has had some other good improvements: it shows the contours of layers and a few numbers when the ctrl key is pressed.

  So, is there a more refined way to use the feature to make it useful again?

  OK, it seems that changing the radio button in the group to the layer, is what I wanted.  Leaving the AutoSelect deselected. the option is separated from him is no not part of this, as it seems.  The ': ' at the end makes it appear that the option right applies to the function on the left and means nothing without her.

  Regarding right-clicking, which gives a long list of everything, and not just what I could be pointing.  Too bad, it would be a handy feature.  Right-click to change diapers doesn't help if I only know the name that is on the photo: the 'hard' is to toggle the visibility up to this I find, and which is no longer available in the layers panel.

• When you use the buttons to generate points of quiz - can problems with cpQuizInfoPointsscored anyone help?

  Hello

  I am putting together that a test is several sections which must give "advice" on measure to users based on their interactions across multiple slides.  I tried this several ways but can get anything to work for my needs.

  Is closer to just using the keys to generate some test scores (each button can be given an individual score for generating marked differently from interactions on each page) and then attempt to deliver scenarios advice branched using advanced actions 'if cpQuizInfoPointsscored variable if' less/more than... etc go slide....  I'm frustrated by the fact that the cpQuizInfoPointsscored variable does not seem to pick up dozens of buttons, even if you include the points in the quiz and these scores come out at the end of the quiz or the results page.

  These scores are obviously stored somewhere - is it variable anther I can go to read these scores at some point and branch a scenario in response?  Is there another way to do this?

  See you soon,.

  Matt

  I would recommend that you create your own user variables to measure the success of the interactions and then use the values of these variables to trigger the branching of fast Action.  As you have seen, some score is computed only once you get to the Quiz results slide.  Having your own variables will give you more freedom to do what you please.

• Cannot use the "environment layer." Selection of out ghosts

  I am creating a layer of environment in a project I'm working on that. I bring in a picture, but every time I try to use it as environment layer selection is ghost out. This happens reliable regardless of what type of image that I use, if it is précomposé, etc. There is nothing in any documentation or a tutorial, I can find to explain this. Does anyone have any idea why this could be implemented?

  Thank you!

  

  Layers of environment are available if you use traced to the rendering to your comp. RADIUS you... it would slow down the way of things.

• I can no longer print Quicken reports using the same program for the past five years

  I have used Quicken for years (same version of Quicken and Windows 7 and has never had a year problem print end reports so far.)  Why

  You must support Quicken community.