Portege R830 - change of the volume by using the flash

Similar Questions

• Portege R830: changing wallpaper

  I want to have a background screen or different wallpaper of the Toshiba one.
  I cannot put through windows. I use a Portege R830 and Windows 7.

  MIA.

  The Office can be customized.

  Make a right click on desktop-> customize

  Now, you can check all the available themes, which also contains background pictures.

  Save the changes.

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Portege R830: Replacement of the SATA SSD connector with standard connector.

  Can I get a standard sata connector termination to the Ribbon that current connects the MB for the toshiba SSD sata?

  When I bought the machine a few months ago, I didn't know that you used an innovative connector between the motherboard and the SSD.

  I want to replace the current drive with a 500 GB HARD drive. I can get hold of a Ribbon to replace the existing one with a standard SATA endpoints.

  Thank you

  Jane

  Perhaps this thread could help you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=244480

• Portege R830 - where is the SIM card slot?

  Is someone can you please tell me where the location for SIM card is that it is not mentioned in the manual?

  Hey,.

  Usually, the SIM card slot is under the battery. So if you remove the battery, you should see a small slot where you can insert the SIM card.

  Check this box!

• necessary changes in the flash file

  I am a beginner flash designer. a client asked me to make changes in a file flash used on its website. I am

  currently working on the same and would appreciate your help. the client gave me a "about.swf" file that I decompiled

  using sothink decompiler 4.5 build 90120 to ' ~ on original.fla'. the xml file resides in the same folder that ~ on

  original.Fla. it contains about_us.xml.you can download these files to

  http://rapidshare.com/files/251775121/online_questions.zip

  change the client is as follows: If you view "about.swf" - when you click on "key people", the details of 4 people

  are given - vivek lakhwara, arun goswami, haresh nayak and ss Barros. He wants 2 more peoples names and details to add.

  This means add 2 other names in the top menu (which shows the details of people on mouseover) which currently has 4

  the names and on mouseover their photo and details must resemble existing of 4 people

  I've seen "changes.jpg need" and more others explain my request.

  Please tell me if I explained my problem properly or of more further clarification is needed.

  It is highly unlikely that someone here will do the work for you, but here's something to start from.  You must change Sprite 145.  She does not have any xml.  You will have to do some research on how current people are made to understand how to add in two additional people and the buttons for them, but it seems to all be contained as a static content in 145 Sprite.

• Index change on the flash card

  Hi, we have a simple query and create a flash with the data graph
  Select case when nom_partition is not null then nom_partition
  of another table_name table_name end.
  Max (report_date),
  Max (mb_allocated)
  of tsreport, tsreport_obj
  where sid = refsid
  and TBS = tablespace_name
  and table_name =: P6_CHOOSEOBJECT
  and report_date between add_months(sysdate,-4) and sysdate
  Group of table_name, nom_partition, to_char(report_date,'WW')
  order by 2;
  Our link is table_name, as x value - we have the report_date and the value is the numeric value of mb_allocated;
  The default flag is mb_allocated, [reportdate] how we can transform the table_name | nom_partition, mb_allocated, report_date?
  We try to add the table_name table to the query as report_date. ' ' || Max (report_date), but them the graph shows that on the x-axis the name and not the ToolTip onmouseover?
  Thanks for all help;

  Yes, Anychart 3 is not flexible with it otherwise.
  Next to name and the value he also accepts the ARGUMENT, but you would need to customize the XML for this too. Unfortunately I'm not easy why to give you the functionality.

  Anychart 5 has tooltips that are much more flexible.

  Dimitri

• Some function keys do not work on my Portege R830

  Like others, I have a new Portege R830 and experience the sudden and unexplained feature of keys loss 13 function. My os is 64-bit native windows 7 with office 2010 installed subsequently. I have the SSD model.

  I followed the instructions, withdrawal PVAT and re-setup, and I have two VAP and operational flashcards. I used the drivers of the USA site for the last series (Australian and European pilot sets are old and different versions).

  In most, but not all, function keys are working again. What does work are the following:
  -Functionkey F12 does not
  -volume up and down keys not working not - what I'm more interested - suggestions on how to make functional again please?

  also, on re - install VAP, I lost the feature on ecobutton. Suggestions on how make it work again?

  Thank you in anticipation

  Hello

  You are on the guy to the right way of the VAP and utility Card Support Flash controls the FN keys. If you have a European model for laptop, I advise to use the drivers of Toshiba page of European pilot, but generally avoid a difference in software

  However, in my case restart the cards Flash allows you to recover the functionality of buttons FN. Can be found in all programs-> Toshiba-> Flash, Flash cards cards.
  In order to verify if restart help.

  Regarding the key Eco: ECO Utility controls this button too then recommend installation/reinstallation of the software next to the VAP

• Portege R830 - Win 8.1 Value Added Package (Flash cards)

  Hello.

  First of all I would like to say that I used my Toshiba Portege R830 with all the operating systems since Windows 7 and I have never installed fresh OS.
  That said, I could not use Intel WiDi on Win10 and had to return to Win8 (DVD which I happily bought as well as the upgrade).

  I installed all the software Toshiba using Upgrade Wizard and for the first time since the 2011', there was no Flash cards available (drop-down menu shown with use of the Fn keys). I used to like 2.5 years on Win 8/8.1 and now his party and is not available to the installation...

  WTF? After a week, I discovered that cards Flash is not present in VAP 1.6 (only in 1.5.X.X or earlier).
  Unfortunately I can't install only stand-alone Flash cards (or can I?).

  And here my question: if I install VAP 1.5 (with Flash cards), can I (ANYHOW) strengthen certain elements (such as system driver) without uninstalling the previous version of VAP?

  From my experience when I run VAP 1.6 installer first thing it does is an uninstall complete previous versions.

  Please help me! I can't imagine who thought that removing the 1.6 flash cards would be a good idea...

  Driver Toshiba UE page provides the Key Utility for Windows 8 Upgrade feature Toshiba v1.00.6626.03.

  So, if you have installed Value Added Package 1.6.0130. You must also install the key function Toshiba utility

  

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• double click on the flash button problem

  How to make a flash button to work on 1 click instead of double click

  It's only IE behavior due to changes, that Microsoft has made several
  years to their browser, on how Active Content (Flash, Quicktime
  etc)
  is managed, after losing a high-profile trial.

  http://blog.deconcept.com/2005/12/15/Internet-Explorer-Eolas-changes-and-the-Flash-plugin/

  Background:
  http://en.Wikipedia.org/wiki/Eolas

  See also
  http://www.Adobe.com/devnet/ActiveContent/

  If you are running Dreamweaver 8.0.2/CS3, the fix is already integrated to DW
  interface.

  Otherwise, try http://blog.deconcept.com/swfobject/

  Furthermore, if you want to use Flash for navigation, consider this-

  1. some people not having Flash installed - what are doing?
  2. the motors don't parse Flash links - your site will not be spidered
  3. the display of the devices and accessories functional don't parse links Flash - which users will be
  do?
  4 DW cannot maintain links within a Flash movie, so if you move or rename
  a file linked, will break your navigation - what will do you?

  It is generally a bad idea for these reasons...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "gsnservices" wrote in message
  News:ffbfuv$S7T$1@forums. Macromedia.com...
  > Yes, the button has a link that works, you just have to dbl click it. When
  > you first click you get a box around the button, click New, and need
  > you for the link

• Portege R830-10v / i7 / change internal SSD 225 GB

  Hello

  I need to change my flash drive SSD internal 225 GB for a 512 GB SSD!

  What should I do to the hardware and software level?
  Can I take any SSD?

  Thanks for the help?

  Best regards, Florence

  The HDD or SSD drive update requires no special modifications in the software or hardware.
  You need a compatible player SATA SSD 2.5.

  Here is a nice and very useful document how to upgrade / replace the Portege R830 & Satellite R830 series SSD or HARD disk drive.

  http://APS2.toshiba-tro.de/KB0/CRU18037E0000R01.htm

  Of course, after this upgrade, you'll need to install the system new the best choice would be its use or recovery disk and recover the laptop to factory settings.

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Portege R830 had dead blue when the screen connects to wifi or shared internet

  It seemed began as soon as the automatic update from Microsoft on Qualcomm, Atheros, every time when connect to any WIFi, share internet, my portege R830 shows blue screen and the following error message:
  unhandled system_thread_exception (athwb.sys)

  I found that I am not the isolated on the Web site. I tried to remove and stop updates. However, once I connect to the internet, the blue screen comes back.

  Is the problem because of the network adapter? The model is Qualcomm Atheros AR9002WB
  Can solve the problem if I download the new driver of Qualcomm-Atheros site? Or if I replace a new adapter?

  The athwb.sys file belongs to the Atheros wireless driver. Usually placed in C:\Windows\System32\drivers\athwb.sys
  It seems that in your case this file causing the BSOD.

  I found a very interesting detail about this problem and why it seems.

  A user wrote:
  {quote} The issue is due to a database hosted on Linux kernel mapped NAS drives and if the Client for NFS is installed on the windows machine. For some reason, this configuration does not work. If you mount your shares and NFS is installed it tries to use the NFS client and fails miserably. Trick is to disassemble all the shares of logging in Safe Mode and then rebooted and uninstall the NFS client and then mount your shares. {quote}

• Portege R830 - forcing mobile broadband using 3 G/HSDPA with Win 8

  Hi all

  Updated my Portege R830 to Windows 8 without problem.

  Given that most of the Wireless Manager functionality has been moved in the Windows, I can not find where I can "force" the connection to 3 G/HSDPA.

  I live in an area where the signal is insufficient and if I let the network default settings, it frequently goes to the strongest EDGE connection. I connected with Wireless Manager, using only 3 G/HSDPA where 2 bars were sufficient for everyday tasks.

  Moments of light bulb? (Travel is unfortunately not an option... ;))

  Hmm, I think that this parameter isn't available in 8 Win.

  Microsoft provides a nice article on configuring broadband to help to win 8 and mentioned configuration isn't it:
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  From my understanding the best signal to broadband will be selected and used if it is available.,.