Application install but not found in the device

Similar Questions

• Wmp54g driver installed, but not seen in the Device Manager

  I'm fighting with reinstalling my drivers of network for more than three days already. (For the history, see http://en.community.dell.com/forums/p/19269864/19470244.aspx#19470244)

  It seems that I finally got the drivers Intel work - however, the WMP54G I had installed before the (I hope) works now driver Intel is not listed in Device Manager. There is no icon in the taskbar wireless connections, either. Another attempt to reinstall the drivers, however, abandoned the process with the comment that drivers would be installed. So, I think the pilot is, but does not at all.

  So, how can I get rid of this driver and try to reinstall another?

  My spec:

  Dell Dimension 9200

  Windows Vista Ultimate x 64 (don't tell me there is no x 64 drivers, please!)

  Seems OK, as I said it.

  Really, it seems that standard LinkSys drivers on the download Web site support not at all x 64 systems. According to the readme files, the driver has not been updated since 2004! This is unacceptable, I think that - as a decent redirect in this forum does not work.

  Anyway, even if some really nice junior contributor on the forums seem to have written some x 64 drivers - himself, I actually did not know how to install without an .exe file. : Pei

  Instead, I did some more googling and learned that the WMP54G v4.1 and v4.0 chips were produced by RaLink and that these guys really provide decent drivers! It is at this point that I remembered my software "Unknown devices" mentioning RaLink, too, RT2500 for v4.0 and RT2561 to v4.1. And well, turns out I have a v4.1 and that their driver is working like a charm. They also provide WLAN monitoring software that allows some additional adjustments. My suggestion: Cisco should outsource their service driver development, too.

• How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  Go to the Toshiba support site and search page of your PC/computer laptop.

  Download and then install the last set of specific drivers for W7.

  See you soon,.
  Jerry

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• "Object not found in the device.

  Hello

  When I try to add the new controller in the WCS (ver. 4.1.91.0), I get this error:

  "Cannot add the device at a rate of WCS: object was not found in the device.

  The controller was added earlier and then deleted again. When I try to add the controller again, I get the above error. It's a WLC2106 I'm trying

  Both the WCS and the new controller works fine, and I tried to start both.

  Still not the same error when you try to add.

  Anyone know what it could be?

  TIA

  Peter

  Yes I do, or restore your controller for 4.1.185 if this version works for you...

• BlackBerry Smartphones New app installed but not found

  I just installed Windows Live Messenger through Application center onmy BB Storm. I went through complete the process, but after that, there is not Windows Live Messenger anywhere. Previously, I installed Google Talk, for a week or two, and this demand seemed fine. When I go to the list of applications under Options, it says that Windows Live Messenger is installed. Under the Application center, it is not saying longer not installed, but I can't. I chose same show everything that I thought that this icon may be hiding.

  This who can I try to fix this?

  Never mind, I found this... .He was under Instant Messaging. I looked everywhere and not under this folder because I thought that is not folder but Blaykberry the instant messaging application icon.

  In any case, for everything I made the first connection to my PC via the Desktop Manager application and after I removed this topic something happened to the sounds and storm return failing however different sound sound are selected. Then after awhile it's settled and now everything works fine again. Weird device.

• FP10 installed but not recognized by the site

  RequiresFP i-player of BBC. Have installed FP but the website still States I need PS and invites me to download. Uninstalled and reinstalled several times.

  IE8 and Vista. Can anyone help?

  Please do not reply to the notification e-mail with the original text (and your email address!) all the answers can be found in this public forum.

  In IE8 under Tools | Add - ons, you have object Flash Shockwave Enabled?

• IMAQ installed, but not found in LabView

  Ladies and gentlemen,

  We have a 2012 faculty (student) University of LabView license and want to use a digital camera with Labview. LabView has been permitted, also installing IMAQ 4.6.4 produced any errors. It is recognized by the NI Measurement and Automation Explorer as you can see in the attached PDF file.

  However, IMAQ features are not visible in the window function LabView and our VI test cannot find functions IMAQ (pages 5 and 6 of the attached PDF file.

  We reinstalled twice, LabView makes sure the antivirus has been disabled. We have also tried to install another version of IMAQ (4.6.1), but with such problems as described above.

  Today, I realized that we have a version of 64-bit Windows and LabView has 32 bits?

  Thank you very much for your help.

  Here's the most likely explanation of our problem: IMAQ 4.6.1 and IMAQ 4.6.4 are not compatible with LabView 2012:

  http://digital.NI.com/public.nsf/allkb/DB928F6D5E9D6B97862579A7006B2850

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• Adobe Creative Suite 5.5 Design Standard for PC, installed but not started that the folder is empty, why? How should I do?  Is there an Adobe customer service or are we just orphaned Adobe with an expensive product to know our

  Adobe Creative Suite 5.5 Design Standard for PC.  Installed but the program does not launch because the folder is empty.  An ideas?

  Thanks for the reply.  I am a little resourceful orphan and I now work on my own.  If I still have problems I'll be back.  Once again thanks for the reply.

• Having problems installing Vista Service Pack 1, says that it is installed but not shown in the installed updates

  Problem of re - install windows service pack 1 KB936330.

  I had to format the hard drive and reload the operating system.  Windows stopped to Service Pack 1.

  I have a Windows Update if it is available for updates.

  When I click on it, updating starts, then gives me the window on the acceptance of the agreement, then a window that could take up to an hour and will restart so save the job.  When I click the grateful this last window, the update screen comes back and says that it has been installed.

  But I can not find the Service Pack 1 or KB936330 on the list of updates installed on Control Panel / programs and features / installed updates window.

  Help.  I can't update to IE 7 because the Service Pack 1 and Service Pack 2 are not installed on my system.

  Thank you

  Mike

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Both articles contain instructions on how to manually install service packs.

• HP Smart Web Printing installed but not symbol in the browser

  I just download HP Smart Web Printing and seemingly installed himself (if I try to install it still has once told me that it is already installed). When I try to use it I just can't find any appropriate symbol anywhere on the browser.

  QUESTION: Is there another way to start the HP Smart Web printing if the symbol does not appear after installation (button quick access, menu option), list of programs?

  Windows 7 Ultimate 64 bit, Internet Explorer 8 32 bit OF

  OK, I found out where the mysterious icon is hidden, with a response to Bonnie on January 19, 2010.

  In my case (IE8 in German), I found that it is necessary to click on the > button at the end of the toolbar and which reveals additional icons, including a door marked "HP Smart Web Printing:

  

• Compilation of modules for an installed, but not running in the kernel?

  With

  LANG = C vmware-modconfig - console - install-all

  I can compile the kernel running modules. But how can I compile the kernel modules does not?

  Think about it.  You can't unlees you start with the kernel that is not running.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible

  When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible. Can you advise?

  Hello

  Follow these steps to solve the problem.

  
  Step 1
  a. Click Start, default programs
  b. Click set your default programs
  c. Select your browser from the list
  d. Click set this program as default
  e. click OK.

  Then proceed as follows:

  
  Step 2
  a. click settings by default access and computer program Set
  b. click on continue if you see the user account control prompt.
  c. click Customize
  d. Select your browser from the list
  e. click OK.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer